Hustler Raptor Deck Issue Fix | How to fix bent idler pulley! (Old Video)

Подписаться 5 тыс.

Просмотров 12 тыс.

50% 1

#Hustler Raptor deck issues fixed. I noticed the belt kept coming off of my deck, even a new belt. Started inspecting and noticed the idler pulley leaning bad. Came up with a simple, easy and cheap solution to #diy and fix the issue. This is a simple video on #howto fix it yourself as I've done here. Hope this helps

Опубликовано:

21 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@Retired683 Год назад

I watched your video but i do not have a welder. I straighten the deck with a small mall. I then used an old blade and put the carriage bolt through and tighten it up with my impact . works great. It was your video that had me looking for a way to support it. Thanks

@BackFortyTV Год назад

Yessir! Glad I could help!

@alloutofdonuts3998 2 года назад

I was laughing so hard when you went to drive back into position to mount the deck. I had just done the same yesterday but at first I couldn’t figure out wtf you doin lol. Glad i Found this vid cuz my pulley was angled too. Also glad I didn’t just pound it back flat. Gonna weld up some angle, good thinkin! Also saw in comments & curious how you like the BadBoy? Might get one next mower. Lots of good reviews.

@BackFortyTV 2 года назад

Lol I’ve found that was the best way for me! Haha and the maverick is an awesome machine. I went with bad boy this time because my best friend has had one for 9 years and has changed nothing but the fluids and a battery.

@keithduboseoutdoors6872 3 года назад

Thanks for the video. I also have the same problem. I just replaced that stupid belt last month and now the deck is warped causing the pulley to bend up. At least I know what the problem is now I have to get some help to get it reinforced.

@BackFortyTV 3 года назад

Glad it helped, bro! I was stumped until I started really looking. Then noticed that weak spot. I love my raptor, but it’s been beat on the past 5-6 years and this was the only real issue I’ve had. That Kohler is tough too.

@BackFortyTV 3 года назад

I could’ve done a much better job fixing it, but I’m a cheap diy guy with most stuff as long as it’s nothing major LOL.

@keithduboseoutdoors6872 3 года назад

Hey if it works it works. It doesn't have to be sexy

@BackFortyTV 3 года назад

@@keithduboseoutdoors6872 that’s right!

@keithduboseoutdoors6872 3 года назад

I didn't realize your channel was about hunting etc.. I just subscribed. I am into the Outdoors video stuff too

@daniellucker 2 года назад

Check your pto clutch bolt mine just snapped off same exact mower that may be causing vibrations as well

@andrewsmith941 3 года назад

I have the same mower and noticed mine was bent the other day. I ordered a new belt but will not install it now until I get it straightened out.

@BackFortyTV 3 года назад

Hope it helps out.

@adb6777 3 месяца назад

Good video. Question...Do you know what the metal pan insert which is welded to the deck that the spindle is screwed into. The welds failed on my hustler and I can't find a replacement. Thanks

@BackFortyTV 3 месяца назад

I’m not sure I understand.

@adb6777 3 месяца назад

ru-vid.comemO8zlJWVGQ?si=6bLrNf6CsAA3OE4o

@adb6777 3 месяца назад

That is the part in question. I tried to weld it back on but it failed. Thanks

@adb6777 3 месяца назад

@BackFortyTV It's the metal pan that the spindle screws into on the deck. The welds on mine failed and the whole thing fell out of the deck...leaving a empty hole where it was . Thanks

@45DerekS 3 года назад

Having the exact same issue. Did this fix the problem long term? If not I am repairing and selling the darn thing.

@BackFortyTV 3 года назад

It sure did. Been using the fire out of it since. Haven’t had belt issues since the fix. Only issues I’ve had is I busted the fuel tank, but that was all me.

@ILOVEYESHUA1ST 2 года назад

Hey did this fix your issue. I’ve got a similar issue I believe (2 belts) later.

@BackFortyTV 2 года назад

It sure did.

@daniellucker 2 года назад

How did you straighten that pulley out???

@BackFortyTV 2 года назад

I just took it off and knocked the deck where that pulley mounts straight. Just banged it with a hammer until the deck was straight. Then re mounted the pulley and put the braces in.

@577buttfan Год назад

My harbor freight welder saves my ass so many times .

@BackFortyTV Год назад

Yessir!

@geraldgrandfield2031 3 года назад

Having the same problem on Rapter 36.

@BackFortyTV 3 года назад

It’s a pain. I sure hope the video helps.

@chrissteininger6097 2 года назад

Just wondering if this is still working for you? It just happened to me and I'm wanting to know if it's a long-term fix. I noticed that I was still working ten months ago from a comment. So is she still going?

@BackFortyTV 2 года назад

Still kicking strong!

@BackFortyTV 2 года назад

I have a bad boy maverick now, but gave this one to my mom. Still cuts good.

@ColeParkerrr 2 года назад

I thought mine was supposed to be bent. Okay what we’re the symptoms of the bent pulley? Just a terrible intermittent vibration?

@BackFortyTV 2 года назад

Yes bad vibration and it eats belts.

@BackFortyTV 2 года назад

The vibrating also causes other bearings to go out faster.

@ColeParkerrr 2 года назад

@@BackFortyTV sick. Thanks for the quick reply. I’ve changed 3 spindles. Must be the reason. Fixed everything still vibrating. I thought it was supposed to be angled lol

@BackFortyTV 2 года назад

@@ColeParkerrr lol I understand. Also check blade balance for vibrations. If they’re beat up and out of balance it’ll cause issues also.

@ILOVEYESHUA1ST 2 года назад

34$ on line