HVAC TRAINING BOARD: How To Bypass A Thermostat (How To Jump Out A Thermostat) Troubleshooting Tips

Подписаться 96 тыс.

Просмотров 56 тыс.

50% 1

HVAC(Heating, Ventilation, Air Conditioning/Refrigeration) TRAINING BOARD: How To Bypass A Thermostat For Your Air Conditioner Or Heating System (How To Jump Out A Thermostat) Thermostat Troubleshooting Tips/Thermostat Not Working/How To Check A Thermostat/How To Fix A Thermostat/How To Repair A Thermostat
=================================================
Supco MAG1YL Appliance Magjumper 30 Vac Magnetic Test Leads
amzn.to/3FFbLV2
Test Leads Set with Alligator Clips Double-ended Jumper Wires
amzn.to/3qlN7md
Fluke 902 FC HVAC True-RMS Clamp Meter
amzn.to/39wvwiK
A thermostat is a regulating device component which senses the temperature of a physical system and performs actions so that the system's temperature is maintained near a desired setpoint.
Thermostats are used in any device or system that heats or cools to a setpoint temperature, examples include building heating, central heating, air conditioners, HVAC systems, water heaters, as well as kitchen equipment including ovens and refrigerators and medical and scientific incubators. In scientific literature, these devices are often broadly classified as thermostatically controlled loads (TCLs). Thermostatically controlled loads comprise roughly 50% of the overall electricity demand in the United States.
=================================================
Thanks for watching!
Email: JumperManTech@Gmail.com
Follow me on Instagram! @JumpRmantech

Наука

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@buckyoufiden2187 Год назад

I subscribed & look forward to watching more of your videos because not only are you exceptionally knowledgeable, you are an excellent instructor by not assuming the observer has prior knowledge. I also like how you explain HVAC / electrical terminology. Thanks too for speaking slowly and clearly and no excess blah, blah or music. Anyhow, thanks so much for your time and sharing your knowledge in the best way ever! God Bless!

@JumpermanTech Год назад

Thank you very much for your feedback! Really appreciate that and your subscription. I try! Stay tuned for new videos every week🔧⚡️

@stevenkarnisky411 Год назад

Just learned how to jump out my thermostat! Batteries must have died in our thermostat. Replaced them, but got no display. Tried the reset procedure, but had no luck. Temp outside is about 30°F, and it is 1 am. I figured I could survive until the morning and save a night time call, if I could run the furnace without the thermostat a couple times. While watching, the furnace came on and the display came up. If it goes out again, I know how to get it started until morning. Your video is clear and concise, and I thank you for it! May have to replace the thermostat tomorrow, but not tonight!

@tommunds-idaho Год назад

I am totally blown away that anyone would take the time to build such a display. YOU, my friend, have the best video with the finest clearest explanation I have ever seen. Bravo. If I could offer a reward, you would surely get it. Thank you. I woke up to a blank t-stat and my AC is dead so far. YOu have given me a clear starting point without me feeling like an idiot.

@xxxxxxxxxxxxxx7096 16 дней назад

Gosh, this is the best demo I have seen about the complexity of thermostat and control board..............

@fochcruzkayoulou4697 Год назад

Wow, I have washed different videos from different people but in your video “ how to bypass a thermostat “ is so well explained step by step, I understood immediately. Thank you so much! Keep making videos like this on Hvac industry, I loved it 😊

@commieslayer8218 2 года назад

the blue wire is only a com for the t-stat to use 24V instead of batteries. Compressor and fan relays have 24V com side already hooked in their place of origin directly to transformer com. Only the power R is sent to yellow and green which is Compressor and indoor fan relays to click in.

@moukhtarzantout7385 Год назад

I love the way you are demonstrating. Step by step and slowly. Great job which I appreciate. Thanks,

@richardross119 2 года назад

Jump Man Tech, this is an awesome tutorial. May God Bless You!!!

@cruzfernandez4554 Год назад

Exceptionally informative video. Thank you for your time and effort to educate the techs

@Travis_HVACTECH_101 6 месяцев назад

I truly appreciate this practical demonstration and explanation. It was clear and concise I'm checking in from Jamaica 🇯🇲🇯🇲🇯🇲

@tnwhitley Год назад

Well done/explained!

@gholakata4404 Год назад

Great demo, helpful Thanks

@migueldominguez4311 Год назад

amazing i watched again and very understanding i like the way you explain step by step since the 24 volts going out to command

@WallaceRoseVincent Год назад

You should make a kit of your ac practice board. If it weren super small and compact, then it would be a handy simulator for home owners.

@nicolerennie 2 года назад

it’s a Christmas miracle!!! JMT with a new and great video. thank you for sharing, this was excellent🌟🌟🌟

@JumpermanTech 2 года назад

Thank you & happy holidays! Appreciate the feedback & thank you for watching🙏 Stay safe out there & stay tuned for new videos every weekend🔧⚡

@soulstochristtv6297 2 года назад

I believed every thing coming from your channel, with the help of it I now work as HVAC technician in a company

@JumpermanTech 2 года назад

Thats awesome! Congratulations. Glad you found my videos helpful 🙏 Best of luck to you. Stay tuned for new videos every week 🔧⚡

@michaelcarl8960 2 года назад

@karstenkindrat2039 10 месяцев назад

Taught me more in 15 minutes than anyone ever has

@rmarcelop8015 Год назад

Excellent explanation. Thank you very much for sharing your knowledge. Regards

@vernessalkic1065 2 года назад

Great video man. Tx much.

@JumpermanTech 2 года назад

Thank you Vernes! Appreciate the feedback. You're very welcome🙃 Stay tuned for new videos every week🔧

@skiroberts3382 8 месяцев назад

Unlike most videos your videos are clearly explained and to th👍👍✌️

@zokotziggy3981 3 месяца назад

Thank you sir . Salute from Haiti .,

@antoniobaez6282 2 года назад

Merry Christmas JumperManTech 🎅 🎄 Someone needs to magnetize those alligator clips...

@JumpermanTech 2 года назад

Merry Christmas! 🎄🎁 That's a great idea! Magentic alligator clips - Dual function 🤔 Stay tuned for new videos every week🔧

@majjatmohamed6927 Год назад

Good explanation thanks so much for your patience

@iliaazizie8437 6 месяцев назад

Great Job. thanks for sharing

@marcosmaldonado952 Год назад

👍👍👍👍👍 love it, thank you

@christopherdecastro2048 11 месяцев назад

nice thank you!

@ronseasyfixjustdoit5098 Год назад

One excellent video I understood everything 👌 👍 🙌 😀

@jrh86 7 месяцев назад

Excellent tutorial easy to follow and very helpful, its another big thank you JM

@izzybell11 2 года назад

Superb video JMT. Excellent presentation and well explained. God Bless you.

@JumpermanTech 2 года назад

Thank you very much Bogdana! Much appreciated 🙏 Happy holidays 🎄 Stay tuned for new videos every week!

@lion91355 11 месяцев назад

Great show bro

@gallagher73 Год назад

So glad we have YT accessible and that you made this video! My Gen 3 Nest that's been working since 2018 just stopped working throwing a Rc fault (no power). It's in the teens with sleet/snow. I was able to bypass the thermostat via some old wires and a light switch on the HVAC panel itself. The detail in yopur video gave me the confidence to cut power to the hvac and wire in the bypass switch as a temp solution. Now I just need to figure out why the sudden Rc power fault at the Nest unit. Voltmeter is not reading any volts there so it's in the wire somewhere, I believe. If anybody reading this has any thoughts, send it....

@PuRe_XtC Год назад

Thats exactly what just happened to me! Very short life span for such an expensive thermostat. Last Nest product I'll ever be buying!

@sohailjanjua123 6 месяцев назад

Nice video. Thanks

@eng.mohdzain4958 2 месяца назад

Thank you so much

@aungthiha5050 11 месяцев назад

Thank you so much bro

@xc6036 3 месяца назад

Subscribed!

@jortega222 9 месяцев назад

Awesome explanation. Thank you so much!😂

@rolandodelapaz3970 2 года назад

Nice tips tutorial about bypass the low voltage 24 volts. Thanks you sir for this important tips i affreciate all your video about HVAC

@shine-cg9uf 2 года назад

Great info JMT 👍. I'm definitely getting those mag jumpers. 💪🇺🇸

@JumpermanTech 2 года назад

Awesome! Link in the videos bio 🙃 Appreciate the feedback! Stay tuned for new videos every week!

@shine-cg9uf 2 года назад

@@JumpermanTech keep them coming. I do commercial refrigeration focus is on walkin n reach-in coolers/freezers ice machines. New to the trade n want to absorb as much as I can. Thanks JMT.

@dj5752 7 месяцев назад

Awesome. Thanks.

@JumpermanTech 7 месяцев назад

You're very welcome & thank you!

@TimMcMahon80 4 месяца назад

One thing you didn't mention is if you accidentally jump from R to C. You can blow the fuse and you now need to replace it.

@joeleach9597 3 месяца назад

Fantastic

@MC... 2 года назад

🤘🤘🔥🔥 That is cool man!

@JumpermanTech 2 года назад

Thank you MC! Appreciate the feedback. Stay tuned for new videos every week!

@MC... 2 года назад

@@JumpermanTech that board is legit! Definitely learned a lot from the vid. Think of it like a relay…. Good content brother🤘🤘🤘

@uchennagodspower1154 10 месяцев назад

Nice one

@akroppoli Год назад

1:50 Press and pull (to the side) is just to remove the batteries casing from the thermostat 😉6:00 C is only used to energize the thermostat with the red wire. That’s why there’s is a note next to your fingers saying C is optional with the batteries!😮

@RepublicanJonCardiasmenos 4 месяца назад

I like the magnetic jumpers. Im going on Amazon to find. Jon-

@simonac688. 10 месяцев назад

Your a real good teacher ...👍👍

@gregjones3660 5 месяцев назад

*you're

@thesilentonevictor 2 года назад

Great explanation 👌

@JumpermanTech 2 года назад

Thank you brother! Appreciate the feedback and your constant support. Means a lot to me. Stay safe out there & stay tuned for new videos evert week 1😎🔧⚡

@carlosemmanuelgarciabrito791 2 года назад

You could be an instructor you have a smooth voice no noise like that I have learn a lot thanks ma boy .

5 месяцев назад

Maaaannn.... thnx you, i just found ur channel, and i tell you. You are awesome. I hope you will do a HEAT PUMP THERMOSTAT WITH ELECTRIC HEAT STRIPS some day to come. Thanks again for this info.

@DavidWilliams-wj4sc 2 месяца назад

Merry Christmas! (saw you posted this on Christmas). Can you tell me what relays you use? I have a nat gas space heater in the living room of a rental unit and I have power 6" ducts from the ceiling of the living room to the two far ends of the apartment, but they are on timer switches. I want a thermostat at each end of the unit (a kitchen and a bedroom) to turn on the fan when the temp drops enough. I'll power the stat with a 24v AC to DC adaptor. I'll house the relay in a 2-gang metal outside the wall box. Anyway, I'm just trying to find the best relay for the 24v DC to turn on the 120v AC power to the powered duct.

@shakiralam167 Год назад

I need to know how to do any packages units cancel the board and modify with the relay .

@JimmyLeeBands 5 месяцев назад

Thank you for this video. Quick question so if I successfully jump the thermostat at the thermostat for Heating and the heater turns on does that mean my thermostat is bad and needs to be replaced

@mutwalid4778 2 года назад

Thnaks bro 🧑‍🔧

@JumpermanTech 2 года назад

You're very welcome! Thank you for watching & commenting. Stay tuned for new videos every week!

@rinsislam7499 Год назад

Great video. But no need indoor PCB to functionally control ?

@mitchellplatin5580 Год назад

Manually jumping the thermostat to cool, how would you then add the evap fan?

@garza7676 11 месяцев назад

You could add a sequencer to W ( heat mode ) to demonstrate heat strips .

@kennedyokwera4857 10 месяцев назад

May u drop for me how to connect temperature controller thermometer for LG fridge

@davidstafford5853 Год назад

Thanks bro

@JumpermanTech Год назад

You're very welcome & thank you! Stay tuned for new videos every week 🔧⚡️

@antoniomontelongo6824 Год назад

Great work can you demonstrate how to wire a three phase ac unit..?

@SmacklePop_ Год назад

Thank you for this video. I was able to confirm the thermostat was the culprit in my furnace OOS. It turned out that the R pin on the thermostat itself was broken from its circuit board. Therefore, the 24VAC R was not getting supplied to any of the W, Y or G pins. Out came my trusty old soldering iron and i was able to solder in a new jumper from pin to circuit board. DONE DEAL! Cost????? == $0.00

@aus_aircon_ref_mech6671 2 года назад

Great video. Big fan! One question though. On site I have a package unit on the roof, and the thermostat is inside the office. If I jump the wires on the package unit, will the thermostat downstairs be shortcircuited?

@JumpermanTech 2 года назад

Thank you! Nothing will be short-circuited. You can jump out the wires at the unit or you can jump it out at the thermostat. It makes no difference. Just make sure you jump out the correct wires. Follow the video for the exact info. Stay tuned for new videos every week

@arielcunanan4994 Год назад

Can you make a video for cold storage or freezer

@parsonbariwa3653 10 месяцев назад

What happen if make jumper the three terminals at the same time such as R to Y and to G is it run both fan and compressor?

@robertjohnson4401 Месяц назад

This is my question too. I believe this is how you test if cooling system is working and your thermostat is definitely bad.

@alapa50 2 года назад

Thank you sir for a excellent presentation and explanation on how to by pass 24 voltage to a hvac power source from your in house thernostat. Thank you!!!

@user-oi6dd9ty1d 10 месяцев назад

Make video about DRV valves

@DJV94022 Год назад

Rheem and ru, are the only two brands that when orange wire is energize (24v) its going into heat versus any other brand when orange has 24v is because its in coolinh

@jaimehurtado3595 2 года назад

Are you considering making a video on how to build the training board?

@JumpermanTech 2 года назад

Yes, I will consider making another board and I will record that one! Thanks for watching & stay tuned for new videos every week 🔧⚡

@carlosa.ruelas3440 15 дней назад

Can a thermostat work without Common

@rickgarcia1392 2 года назад

So if I want the compressor and indoor fan to both come on then I jump red to yellow and red to Green simultaneously. Is that correct?

@JumpermanTech 2 года назад

Yes, you got it! Thanks for watching & stay tuned for new videos every week🔧⚡️

@ILoveKittys78 11 месяцев назад

💚😻💯

@sandylee7818 10 месяцев назад

CAN YOU SHOW HOW TO WIRE A COPLAND POTENTIL REALY PLEASE

@aramabwbakr8300 2 года назад

Thanks...

@JCHall-uf2tz Год назад

I've always wondered why red wasn't heat, blue isn't cool (like in plumbing); and white isn't A/C common (like in electrical) .

@hjc4604 10 месяцев назад

It's good but I already knew all this.

@DCA-eu1op 2 года назад

The press on the side of the thermostat is to release the battery holder

@fireballzrm 2 года назад

Yeah, I don't know how this guy cant see that, there's no clip on the base that tab connects to lol

@pram3384 2 года назад

Do a video how to create jumpers

@JumpermanTech 2 года назад

I could do that. I can create a video of showing different ways to use the jumper method 👌 Thanks for watching & stay tuned for new videos every week 🔧

@aus_aircon_ref_mech6671 2 года назад

@@JumpermanTech I learned that the hard way last week. I made a jumping wire but had to hold it there for 5 minutes until the short cycle timer finished …. I need some mag & alligator jumpers 😵‍💫😵‍💫😵‍💫

@JumpermanTech 2 года назад

@@aus_aircon_ref_mech6671 lol I've been there before. I'm going to make that video as it could definitely be helpful👍 Quick tip: You can wirenut the wires together so you don't have to wait there for that 5 min but this might take a few min to do as well as you'll have turn the power off and physically connect the wires you're trying to jump. Stay tuned for new videos every week!