Тёмный
No video :(

Hydra Installation - PCM Soldering (HD) 

Power Hungry Performance
Подписаться 2,2 тыс.
Просмотров 6 тыс.
50% 1

In this video, we'll show you how to solder the J3 (Diagnostics) Port of the EEC-V PCM used in the 7.3L Power Stroke Diesel.
While this process may be a little daunting to some folks, it's not a very difficult operation. We understand that not everyone is comfortable with performing this procedure, and for those people we recommend that you locate a competent electronics repair shop to handle this and ask them to watch this video as a guideline.
As you can see, it only take a couple minutes to properly solder the PCM. I've soldered hundreds (if not thousands) of these over the last 20 years so it takes me no time at all, but even someone who has never soldered before should be able to handle this if they watch the video and take their time. AND USE FLUX!
I hope everyone finds this video helpful. If you have any questions regarding this process, please contact us at gopowerhungry.com or by phone at (678) 890-1110.
Thanks!

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 5   
@myleshansel7950
@myleshansel7950 6 лет назад
Excellent video
@PowerHungryPerformance
@PowerHungryPerformance 5 лет назад
Thanks for stopping by, Myles. Adding a little bit of solder goes a long way towards having a rock solid connection to the J3 port.
@TroopThrowback
@TroopThrowback 2 года назад
What symptoms let you know this is the problem with your hydra chip?
@kylesmith4599
@kylesmith4599 5 лет назад
About 2 years ago I purchased a ts chip and was unable to install it because I took to much off the connections with the scotch bright pad. I ended up returning the chip in frustration and got a sct x4 flash programmer and it is very inconvenient to change tunes and very expensive to buy tunes let alone find them. Is there anyway that I could purchase a hydra and send pcm to y’all to resoder and check the connections with the hydra that I would purchase?
@PowerHungryPerformance
@PowerHungryPerformance 5 лет назад
Hey Kyle, we do offer cleaning and resoldering for $75+ shipping. The turnaround is typically 1 day.
Далее
Some tips when soldering ECUs
9:07
Просмотров 3,9 тыс.
Hydra Installation - PCM Cleaning (HD)
5:06
Просмотров 24 тыс.
HOW TO SOLDER! (Beginner's Guide)
22:03
Просмотров 616 тыс.
How to Use Soldering Flux?
0:57
Просмотров 316 тыс.