Тёмный
No video :(

HydrosPlus Bucket+ Backhoe Cylinder First Look 

HydrosPlus
Подписаться 4,4 тыс.
Просмотров 2,7 тыс.
50% 1

After seeing so many bent bucket cylinders on the forums, we decided to build a cylinder that was affordable and tougher than the stock one...but we couldn't resist adding some power. The Bucket+ Backhoe Cylinder from HydrosPlus give you 27% more dirt and root busting power and has a 1.25" rod so that you won't be bending the rod and damaging your backhoe dipper stick.
If you're interested in upgrading your backhoe's root breaking ability, or just insuring that you're not stuck in the field with a bent hydraulic cylinder rod, you can purchase one here - hydrosplus.com...

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@stan5949
@stan5949 Год назад
Great video ‼️ Pretty good operator too👍🏻
@CrowdersGreatAdventures
@CrowdersGreatAdventures Год назад
My bucket cylinders not the one bending it's the one behind it that runs the arm that lifts the bucket up and down
@mymorristribe
@mymorristribe Год назад
I recommend you copy whatever audio setup (noise canceling mics) that TTWT has. That cylinder looks impressive.
@CrowdersGreatAdventures
@CrowdersGreatAdventures Год назад
I have an older model John Deere backhoe and I'm not sure if it's a8b or what it is I don't know but it's mounted on a John Deere 5303 tractor and I just keep bending cylinders on the extension arm when I reach out and go to dig and curl under it just been some like a tbsp what can I do? Ive even lowered rpms
@RFHavens1
@RFHavens1 Год назад
Ken, Very nice. Do you use the stock hoses and just swap out the cylinder?
@HydrosPlus
@HydrosPlus Год назад
Yes. It's a direct fit. Install only takes a few minutes.
@brianemerick9517
@brianemerick9517 Год назад
Very impressive.👍
@darrylwright1609
@darrylwright1609 Год назад
Will it work on Woods bh75 backhoe curl cylinder. Plan on getting hydro pump for jd 3025. Just purchase loader lift cylinders. Thanks
@HydrosPlus
@HydrosPlus Год назад
I'm not sure. Send me an email at kevin@hydrosplus.com or call 501.291.2002 and we can grab some measurements to confirm. Thanks!
@Sam-pw8zh
@Sam-pw8zh Год назад
Can I find you at GIE... OR the equipment expo?
@HydrosPlus
@HydrosPlus Год назад
At the moment, I won't be there, but still looking at my schedule to see if I can sneak up there for a day.
@Sam-pw8zh
@Sam-pw8zh Год назад
@@HydrosPlus me too!
@travishale1279
@travishale1279 Год назад
I have a 2021 2025r, what is the first pump upgrade I should do? I would like to run that backhoe cylinder, and the upgraded loader cylinders
@HydrosPlus
@HydrosPlus Год назад
I would recommend the stage 3 if you're getting the cylinders, but if I'm honest, I always recommend the stage 3. You can run at lower RPMs and get good hydraulic speed. Lots of people are happy with stage 2, but stage 3 is what most people are going with now.
@travishale1279
@travishale1279 Год назад
@@HydrosPlus do you have to buy a stage 2 and stage 3 going from stock to stage 3?
@HydrosPlus
@HydrosPlus Год назад
@@travishale1279 No. You just pick the option that you want and everything comes with it that you need for that version. So when you choose state three, it will have the components for stage 1 as well as the stage 3 pump and the lines to connect everything.
@CrowdersGreatAdventures
@CrowdersGreatAdventures Год назад
I have an older model 3point backhoe on a John Deere 5303 tractor. I keep bending the arm extension cylinder while scooping. It just bens it like a tablespoon. Even with low rpms on the tractor
@craigflatley7370
@craigflatley7370 Год назад
👍
Далее
HydrosPlus FlatFace+ Features and Installation
16:57
John Deere Cylinder Rebuild
30:57
Просмотров 26 тыс.
HydrosPlus Lift+ Install 120 and 220 models
14:15
Просмотров 5 тыс.
Presenting the New 1025r
13:36
Просмотров 3,2 тыс.
Bent the rod on that thumb cylinder
59:08
Просмотров 214 тыс.
HydrosPlus Lift+ 3E Cylinder Install and First Look
17:30