HyperDip (PlastiDip) 4Runner Transformation!: How To

Подписаться 6 тыс.

Просмотров 177 тыс.

50% 1

Using the Shadow Black HyperDip, a bit different than PlastiDip, I transformed the look of the 4Runner.
I couldn't be happier with the way it came out; Wheels and emblems
Leave a comment or question below, I always read and respond.
Subscribe for a ton more content coming!
*HyperDip Wheel Kit:
amzn.to/3LHnNR5
or
www.dipyourcar.com?ref=891
*All current Mods:
AUTOBOTS Tow Hitch Receiver
amzn.to/385BhY2
Stay There 3'' × 20ft Heavy Duty Tow Strap Recovery Kit
amzn.to/3N4fW0j
Voodonala for 4Runner Side Door Storage Box
amzn.to/3LH8OX8
JDMCAR Compatible with Center Console Organizer
amzn.to/3vV0Oey
PAVONI Car Inflatable Air Camping Mattress Pad
amzn.to/3s7Pk6n
Qualizzi Protective Sunscreen
amzn.to/3LHpRsj
YITAMOTOR Floor Mats
amzn.to/3kBg5fq
LFD Rock Sliders:
lfdoffroad.com/collections/5t...
Canvasback Cargo Protector
www.canvasback.com/products/t...
Westcott Deigns Ladder
westcottdesigns.net/product/t...
Video Equipment Used:
Pixel 6 Pro Phone
amzn.to/3Fk4BGD
GoPro HERO7 Black
amzn.to/3ycy9o9
Rode Wireless Go - Compact Wireless Microphone
amzn.to/39INhQ1
Tripod Mount Accessory Kits
amzn.to/3vIfK0L
*this channel may receive a small commission when ordering from certain links. Thank you for your support

Авто/Мото

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 365

@AZOverland2017 Год назад

UPDATE: How has it held up 1 year later? Here is the new video update: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_RprxIX2NX0.html&ab_channel=AZOverland

@skillepoang 2 года назад

Thanks for the being thorough without dragging it out. Was on the fence about doing this myself, but your video helped convince me. Very much appreciated

@AZOverland2017 2 года назад

I appreciate the feedback. Good luck with project, hope all goes smoothly!

@JeepHemiLyfe Год назад

Awesome video, used your steps to coat my new rims for my Jeep. I appreciate the quality of the resolution, the focus on the job, the clarity in your tips and tricks, and most importantly watching how you applied the coating to achieve wonderful results. Keep making videos like this, cheers🤙

@AZOverland2017 Год назад

Thank you!. I appreciate the feedback

@Grimdegn 2 года назад

$125 and some good sweat equity! I liked how it looked before, and I love it now! Great info.

@AZOverland2017 2 года назад

It's a night and day difference. Well worth the time put in!

@uno3863 2 года назад

Been thinking about doing this to my blk '12 tacoma, yours looks great 👌🏽

@thedirtydiana863 2 года назад

Love how the wheels came out... Great job

@AZOverland2017 2 года назад

Thank you so much!

@jeffreynye3019 Год назад

You made it look so so easy! Lol. Looks awesome sir, very nice job!

@AZOverland2017 Год назад

Thank you. I have a background in paint and bodywork so overall not too difficult. thanks for watching!

@footballcoach1495 2 года назад

I bought the kit and it arrived yesterday. I hope to do my Porsche Cayenne (2013) today. I will follow your steps and get it done. I will do the 4 wheels and the Porsche Cayenne on the back. I will also do the chrome window trim around the front and back windows. I hope mine comes out as nice as yours. Great video and it was very helpful. Thank You.

@AZOverland2017 2 года назад

I'm happy to hear that, thank you!. Reach out if you have any questions. Take your time with the prep, that is most important.

@VegasRey 8 месяцев назад

Super informative video! I have an SR5 on the way and I’m already planning this out as my first “upgrade” Thank you!

@AZOverland2017 8 месяцев назад

Absolutely! Loving my SR5 still.

@Brittlesmith Год назад

I have a black sr5 and I never knew this was possible! I’m so tempted to try it but scared I’ll mess it up. I’ve never done anything like this before. Your results are amazing!

@AZOverland2017 Год назад

Thanks Brittney. Here's a suggestion if you want to attempt it. Don't go all in right away. Take 1 wheel and just focus on that. Take you time with it and learn what is working and what isn't in regards to spray angles and how fast/slow you are spraying. The worst case is you mess up 1 wheel. Let it dry and peel it off and start fresh. Just make sure you put enough material on so it peels off. If it is too thin it won't peel correctly. If it looks good, move on to the next wheel on a different day. You will get progressively better. Most importantly, don't try to stray from the correct prep, wetness, and # of coats.

@jeffnaval4894 Год назад

u wont mess it up. its just plastic u can easily take it off.

@illescasf Год назад

I have an S5 and did the wheels w matt black. Looks awesome.

@proudveteran4696 11 месяцев назад

Go for it

@will4673 2 года назад

Awesome job ! I just bought a 2022 TRD Premium, bright silver and would love to black out the rims and insignias.

@AZOverland2017 2 года назад

It definitely takes it to the next level. Silver and black are sweet together.

@e.b.6766 Год назад

Looks really good. You’ve inspired me. Once I get back from my work road trip this project will be done to my truck.

@AZOverland2017 Год назад

Thanks! No regrets here, still looks great

@billcosgrove2112 2 года назад

Looks great! Thanks for the tips, might try a bronze dip on my army green 4runner. Hopefully it does well with the dry heat of Arizona, I'm in central California, very dry and hot as well.

@AZOverland2017 2 года назад

It's just starting to get hot here so we shall see. Still looks great though

@j2koolc922 2 года назад

4 runner your own personal "night edition" excellent work......lol

@AZOverland2017 2 года назад

Ha, Thank you

@drifter-indian1448 2 года назад

Great make over, love the video and the result. How are they holding up so far? Any idea how long they would last in a wet place like Houston? We got lot of rain here. Also, do you have to be careful when washing the car or they just cure and end up being like paint? Thanks in advance for your feedback.

@AZOverland2017 2 года назад

Water should not be an issue. I was concerned about the water jets through the carwash as I don't have time to hand wash this vehicle. I did a video of the 1st time (see below). I also ran it though the Costco car wash which has more powerful jets nd so far no issues. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5QWPJvWGTk4.html&ab_channel=AZOverland

@michaeltammaro482 10 месяцев назад

Dude, you did a fabulous job. I am very impressed.

@AZOverland2017 10 месяцев назад

Thank you, I appreciate it!

@jimcasso407 2 года назад

Looks awesome! Great job. I just got my Hyperdip delivery and am planning to do the same to my 2018 BMW X1 ASAP. Hope it comes out as clean as yours did.

@AZOverland2017 2 года назад

Awesome! Just take you time with the prep. Let me know if you have any questions along the way and Good Luck.

@clellbritt3434 2 года назад

Love the rims. Think I might do these on my Ranger. Though if it does last a few years then not worth it IMO. Great video and great explanation of the steps.

@AZOverland2017 2 года назад

It's definitely worth it for me even if only for a few years. I'm putting money into other areas of the 4Runner first while deciding what lift and tires I want. So this certainly gives me the look I want for now. I was not liking the silver

@OverlandPNW 2 года назад

Wow...very nice black out!

@AZOverland2017 2 года назад

Thank you, I appreciate it!

@dianaevans6725 Год назад

Looks awesome!!! I’m getting a new Mini Cooper S 2- door all black but I’m sure there are some things not black that I’ll need to do this to!! Thank you for this video!!!

@AZOverland2017 Год назад

Your welcome. Thanks for watching!

@EverydayATV 2 года назад

Nice Job. The back emblem came out especially nice. My polished aluminum wheels on my F-150 Platinum have started to pit and was looking to do the Hyperdip also. Just trying to decide between their Glossy Metallic Grey and Glossy Metallic Black (the truck is Metallic Black). Thanks.

@AZOverland2017 2 года назад

Thank you. I would lean towards the Metallic Black, but that is just my opinion. I'm not sure how the Gray shows but the Black isn't a very deep black so i think it may go very well with your set up!

@brandonmcdaniel930 Год назад

Man that looks ten times better!! I was thinking of ding my 12 tundra. Its platinum package black with all the chrome. Want to murder it out.

@AZOverland2017 Год назад

Thank you! That would look mean blacked out. I thought I like the 4Runner when I first got it but this definitely made me appreciate it more.

@rumrunner8260 Год назад

Looks great! This should save like $200 on a gray delete on my C43! We'll see how this hyperdip holds up being on the diffuser areas of my car.

@AZOverland2017 Год назад

Thanks. Let me know how it does being that close to the exhaust. As long as its not touching I bet it does pretty well.

@anthonypitruzzello5614 2 года назад

Nice work, thanks for sharing

@AZOverland2017 2 года назад

Certainly

@theodoregrimble-4p1ed28 2 года назад

Great job. Looks good. Good to know it will stand up to a carwash. Will you keep us posted how well it holds up when you have to change your tires?

@AZOverland2017 2 года назад

Yes sir, I will

@anthonyortiz4538 2 года назад

Love your intro music choice haha

@AZOverland2017 2 года назад

Thank you sir!

@MrDannyboy808 2 года назад

Great job. Looks good. Thinking about doing this to my rims on my TRD ORP. Where did you get the hyperdip from? Does it come as a kit with the dip release, pre dip spray and the pistol grip handle for spray can?

@AZOverland2017 2 года назад

Thank you sir! I purchased the kit from Dipyourcar.com The spray handle is an additional accessory. Yes, the kit comes complete minus the spray handle

@sneakersonfeet9045 2 года назад

Great job!

@AZOverland2017 2 года назад

I appreciate that

@zarmindrow5831 Год назад

you transformed the shit outta that 4Runner yo

@AZOverland2017 Год назад

Thanks! You should see it now

@shannondixon3767 2 года назад

Clean job... 4Runner looks great. Only problem is when you go to have your tires rotated the lugs will get messed up.

@AZOverland2017 2 года назад

Thank you! I did a video on just what you're talking about. Check it out here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UnvQ9pRUcE.html

@MC-eh2ot 2 года назад

Great video. Looks a lot nicer than Plasti dip. I wonder how long this will last compared to plasti dip

@AZOverland2017 2 года назад

We shall find out but I suspect as long or longer

@autobotsvsdecepticons9165 11 месяцев назад

Great results, well made instructional video. Let me ask, did you have any over spray issues on the body fenders from not masking them. I'm asking cause i want to hyperdip my 06 Tundra wheels and i like that you didnt have to take extra masking steps.

@AZOverland2017 11 месяцев назад

I did not get any overspray on the body from the wheels. i did get a little overspray from the masking of the rear emblem. I should have put another layer around on that, but it was easy cleanup. It shouldn't be an issue doing the wheels on a Tundra as long as it's not windy. On trucks, with the wider sidewall and distance between the wheels and body panels, it shouldn't require masking. On some cars where that distance is less, it may require masking.

@sethsines6108 2 года назад

Great video and info. Just curious on how it holds up to rock chips? I have to travel on gravel a few times a week.

@AZOverland2017 2 года назад

I have not had any damage from rocks. I have been traveling on an Arizona freeway about 12 hrs per week , many times behind work trucks and have been off-road 4 times since I sprayed it. I just washed the 4Runner today and went out to look after your asked this question. I have no rock chips. The only damage is from a branch that scraped my lower valence and took a little material with it. Good news is, the paint below that scrape is in good condition so it protected it pretty well.

@yermailmain206 11 месяцев назад

Looks good. For an added touch you can pull off those yota emblems on the center caps. Seen people paint those red🤷🏽

@AZOverland2017 11 месяцев назад

Good idea. I would do green though

@pegstervegas 2 года назад

Thanks so much for this video. I’m so going to attempt it this weekend. Wondering if the desert heat will wreak havoc if I do this in hot weather…..

@AZOverland2017 2 года назад

It is better to do it in the heat then freezing temps. The material will dry faster so experiment with spray times as far as going moderate vs light. You definitely don't want to get runs buy going too heavy but also don't want to go too light and have a rough textured finish. Also, try to avoid doing it in direct sunlight. Start early. Good luck!

@Wild1995 2 года назад

Looks great. I just wish I was brave enough to do this.

@AZOverland2017 2 года назад

Don't be scared, do it in small steps and take your time

@ericramirez3663 2 года назад

I was going to buy the trd wheels for my new 2021 4runner but this is a cheaper way to get it done.. I just bought the covers for the emblems should of did this dip instead 🤷🏽‍♂️

@7279wyo 2 года назад

Thank you gr8 job I will now purchase looks awesome

@AZOverland2017 2 года назад

Cool. Take your time with the prep!

@anthonypitruzzello9547 2 года назад

Huge difference, for the better

@AZOverland2017 2 года назад

Agreed

@arminstephen 2 года назад

How many hyperdip bottle does it come when you ordered it? Does it come with the deep release and the predip spray?

@AZOverland2017 2 года назад

The Wheel Kit comes with 5 cans. Yes, it comes with everything you need including the plastic when you get the Kit

@coreyavecilla8531 2 года назад

🔥🔥🔥🔥🔥great content!!!🚗

@AZOverland2017 2 года назад

Thank you!

@JuanCastro1005 3 месяца назад

Do you prefer this product over the original plastic dip? Wanting to do this to my wheels but not sure which route to go

@AZOverland2017 3 месяца назад

Yes. It sprays a bit different but seems to lay down a bit smoother and doesn't require the gloss enhancer that Plastidip does if you want a bit of a sheen.

@thatsgame1 3 месяца назад

I bought a used truck where the wheels were painted with something similar and it's chipping. Should i sand or just wipe off like you did?

@AZOverland2017 3 месяца назад

If it's Hyperdip or Plastidip, and it was applied correctly, it will peel off. It's like a rubberized coating. If that doesn't work they have a product on their website that is supposed to help dissolve it

@veryhighpower 2 года назад

Job well done.

@AZOverland2017 2 года назад

I appreciate that. Thank you!

@kenmoist Год назад

Will this stuff peel off where the adhesion promoter was applied if u want to remove it?

@AZOverland2017 Год назад

Yes, peels right off if applied to correct thickness. Could be a pain if applied too thin

@bobb.7899 2 года назад

Looks awesome. Want to do that to my 4runner supposed to get in another month or so. What do you think durability will be? Wonder what lug nuts will look like after taking off and putting back on.

@AZOverland2017 2 года назад

I'm hoping to get at least a ear out of the coating, but we shall see if the Arizona sun has different plans. I might have to do a video of removing the lugs. Not sure what the result will be but i will have a back up set of black lugs ready

@stevenjunk1268 9 месяцев назад

@@AZOverland2017 I was wondering the same thing about the lugs for tire rotations/alignments....

@AZOverland2017 9 месяцев назад

@@stevenjunk1268 I did a video on this also. See below ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UnvQ9pRUcE.htmlsi=wU4UZD69s6ScyuWW

@scottusa03 6 месяцев назад

Looks great!! Next, take the dealership logo off on the back side. Use a heat gun and goo gone.

@AZOverland2017 6 месяцев назад

Thanks!

@judiceat-large7716 2 года назад

Great vid

@AZOverland2017 2 года назад

I appreciate that!

@E95P 2 года назад

Nice job. 👍

@AZOverland2017 2 года назад

Thank you!

@jameshoy3530 Год назад

Does one use the peel prep gel and pre-spray when using on emblems or only on wheels? I thought HyperDip didn’t require pre-spray like plastidip.

@AZOverland2017 Год назад

Only on the tires before spraying the wheels. you don't need to put it around the emblems, it will peel off the paint easily and break at the raised emblems as long as you build it up correctly.

@sherylh2567 2 года назад

Hey my fellow AZ. We actually have the exact trim mand color 4runner. I just got mine and considering doing the same thing. Thank you for the video! I also purchased some of your recommendations

@AZOverland2017 2 года назад

That's Great Sheryl! If you end up doing it and are near the NW valley let me know. Maybe we do a video on it

@sherylh2567 2 года назад

NW valley isn't far at all. 15 to 20 mins drive. I'm actually going to focus first in figuring out installing a push and rocker buttons for hatch opener and also rear window from the inside(back end). For camping purposes. Let me know if you're planning to do it. Thanks

@AZOverland2017 2 года назад

@@sherylh2567 Well, I didn't, but now I'm intrigued. Do you have a link, I would like to read up more on this. Thank you

@davidspeer1970 11 месяцев назад

What happens when you have to pull the lugnuts to change the tire? Do you repeat the entire process?

@AZOverland2017 11 месяцев назад

I did a video on this since I've been asked that question so often. See the link below ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UnvQ9pRUcE.htmlsi=lwP1iAFAQJDGWFC-

@xavierv.1207 2 года назад

Very nice

@AZOverland2017 2 года назад

Thank you!

@Stup1dGeneration Год назад

Hi, did you plastidip the center caps? If so, did you put the stickers on the plastidip or before application? Thank you!

@AZOverland2017 Год назад

Center caps were prepped and sprayed with the wheels so they are dipped as they were and holding up just fine

@ph-ftw8273 8 месяцев назад

wow looking good 👍

@AZOverland2017 8 месяцев назад

Thank you!

@rolandomonteclaroautowork2882 2 года назад

Great job sir👍👍👍

@AZOverland2017 2 года назад

Thank you!

@cbeserra 2 года назад

Looks great! Have you rotated the tires yet?

@AZOverland2017 2 года назад

I will be doing that soon. We shall see how the lugs hold up😁

@ShekaibRashidi12 2 года назад

I just hyper dipped my wheels but made a mistake when applying the dip, the bottom side of the outer ring on all 4 wheels didn’t get fully covered due to my spraying angle and you can notice some silver coming through. Any suggestions on fixing this? Do I simply go over the spot again? Any prep needs to be done?

@AZOverland2017 2 года назад

Sorry to hear that. You definitely want to hit every angle possible, but you obviously know that now🙃 You should be able to re-prep and spray. Make sure the wheel is very clean and dry. Hit it with the Pre-Dip spray and microfiber towel and spray it again.

@JASmith-oy8db 2 года назад

How did your touch up job turn out?

@CenCalBimat 2 года назад

Just convinced me! Looks really nice! I always see hyperdip applied with the wheels on the vehicle. No issues removing the wheels after to rotate?

@AZOverland2017 2 года назад

I get this question a lot, specifically about if this product gets compromised on the lugs when taking the wheels off. I haven't rotated tires yet though I am about to do so. I will have to document if there is any damage. However, I will replace them with black lug nuts if there is. It is still worth the money to change the look the way I wanted. If you do decide to order feel free to use the link in the video description. It is an affiliate link though when I made this video I was not in communication with this company at all. Good Luck!

@CenCalBimat 2 года назад

@@AZOverland2017, thanks again! I did use the link to buy, and got a first time discount as well. Beat Amazon by $20! I was thinking about removing the wheels to dip them, mostly because I tend to get runs when I paint!

@AZOverland2017 2 года назад

@@CenCalBimat Great! 2 things. Spray cans cans are not ideal to spray when holding them horizontally. While it can be done you may get some spitting or the cans might not be used all the way. I understand about being concerned by runs and especially because this is fairly thin and can run quite easily. Make sure your 1st 2 coats are very light!

@CenCalBimat 2 года назад

@@AZOverland2017 kind of forgot about that! Good reminder! My first dip experience wasn’t great, but I didn’t keep the van vertical!

@BrunoGenovese 2 года назад

Wonder if that is legal to do that?

@shawnhorne9296 Год назад

Like ,but what happens if the wheels get dirty or mud on them? Will it wash off or does it fu up

@AZOverland2017 Год назад

Yes, they clean up fine. You just need to care for them a little differently. No harsh chemicals and be gentle with scrubbing. I've been off roading, driven through water crossings, pressure washed, and taken it through auto car washes many times. If you haven't seen my 1 year later update video, it's here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_RprxIX2NX0.html

@davidwayne9982 Год назад

Why did you do that? It looks GREAT as is!!! (not dissing it-- I understand wanting a different look-- just CURIOUS).... can't wait to see it.

@AZOverland2017 Год назад

I really dislike the look of chrome or aluminum wheels on certain vehicles, and this is certainly one of them. In my opinion is goes from a "soccer mom" look to looking sleeker and meaner. But yes, to each his own. I appreciate your comment!

@davidwayne9982 Год назад

@@AZOverland2017 I agree- but when you started talking about it they were BLACK.. I don't recall seeing any chrome.. maybe I missed something..

@AZOverland2017 Год назад

@@davidwayne9982 Yeah, I think you missed the whole beginning of the vid. 😀

@yikaichen163 2 года назад

Great vedio! Is it easy to clean up? If I need to return the car.

@AZOverland2017 2 года назад

If you spray it according to the directions, yes. Some people don't spray enough on and stop when they believe they have coverage. The issue is if it is applied too thin it will make removal difficult.

@stansbruv3169 Год назад

Good lord! What a difference! Looks great man. How’s it holding up a year later?

@AZOverland2017 Год назад

Thank you. It is doing quite well. I plan on doing a follow up video to show it again after 15 months. I'm actually surprised with how well it performed after the hell I put this 4Runner through off-road. Thanks for watching!

@lot5953 2 года назад

Yay SR5 💪

@thaddeusnorris1568 8 месяцев назад

@AZOverland2017. What size tire are those? Do you think it would be easier to take your tires off?

@AZOverland2017 8 месяцев назад

They are actually factory size but look a big bigger because they are All Terrains. No, There is a lot to take into consideration. Are you able to get the vehicle completely off the ground to get all 4 wheels off; tools/equipment? Can you keep your vehicle on jack stands until the next day without wheels while it cures? You should spray them upright, not laying down, etc

@rudya0099 2 года назад

How long should it dry before you go out and drive?

@AZOverland2017 2 года назад

After your last coat, depending on weather, I would wait a minmum 3-4 hours.

@thewhiteshadowcamp Год назад

How long does the dip last for until you have to touch up? Also how does it wear through car washes?

@AZOverland2017 Год назад

Check through my videos, they answer your questions. The last video I did a few days ago is an update on the condition after more than a year

@bashkimselmani2620 Год назад

We’re you able to do the emblems with the same 5 cans you got from the wheel kit? Or did you have to buy more?

@AZOverland2017 Год назад

Yes, same 5, they didn't take much

@johnsantostefano3373 Год назад

Is this durable when you bring your vehicle in for tire rotation, etc?

@AZOverland2017 Год назад

I did another video regarding removing the lug nuts. I do my own tire rotations, so I am very careful when handling the wheels. I'm not confident others would be as careful. So yes they could cause damage if not

@Bscott-390 2 года назад

Will it come off of the lug nuts when they are removed?

@AZOverland2017 2 года назад

I've been asked this so many times and it is a great question. I haven't taken a wheel off yet. But, I will get some black lugs if they don't hold form the impact gun.

@marcopardo453 Год назад

Awesome explanation; as all your videos. How do you wash the rims? Has the paint held strong? PS: I recently bought the Pavoni air mattress 👊🏼

@AZOverland2017 Год назад

I appreciate it. I just did a video recently with the 1 year follow up. It has held up nicely. I hand wash the wheels for the most part. After drying I do another cleaning with a waterless wash and microfiber towel. Have you slept on the Pavoni yet? Hyperdip follow up: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_RprxIX2NX0.html

@marcopardo453 Год назад

@@AZOverland2017 I was hoping this weekend, as we were heading to Hither Hills State Park near Montauk, but the rain spoiled the trip 😖. I will check out the video. Thanks again.

@Matthew-ed1kb Год назад

This is the second video I've watched with Hyper Dip and neither of y'all masked off the car. Are you not worried about overspray with this product? Thanks!

@AZOverland2017 Год назад

With the 4Runner, no need to mask around the wheels because of the size of the sidewalk and distance between the tire and fenders. With a car, I would mask a bit. Regarding the emblems, I did run some masking paper about a foot on all sides. For this, I would recommend running another layer (2') on all sides. Especially you are dealing with wind. Overall, my method worked out fine for my conditions. I also painted cars for a living for several years so I sort of knew the threshold of containing the over spray

@kenna.9368 2 года назад

How long before having to don’t again? I mean how long will it last?

@AZOverland2017 2 года назад

I don't have an answer for that. This was my 1st time using the product so we shall see. I'm thinking up to year with the weather we have here in AZ.

@franciscopinto6099 Год назад

it look really nice, Any recommendations when you are going to wash the car?

@AZOverland2017 Год назад

I've run it through the automatic car washes numerous times with no issue. If I wash it home and I use a pressure washer I just don't put the stream right on the wheels or other hyper dipped parts directly?

@hanssiverts3643 Год назад

Any issues with the dip coming off when tires are rotated? That was my only hesitation.

@AZOverland2017 Год назад

Every wheel is different because of the type of lug nuts and the if they are recessed or not. I did a video on my removing the lugs which I will put below. As far as damage to the Hyper dipped wheel itself, there should be none if you handle it by the tires when moving and mounting them. If you grab by the actual wheel itself, yes, there could be damage to the coating. If the lugs get scuffed and show, you can repkace the lugs with black ones. I will be doing another video soon on the condition of the Hyperdip after 1+ years ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UnvQ9pRUcE.html&ab_channel=AZOverland

@KendrasEdge757 3 месяца назад

My question is how long did this last before you needed to do it again?! Seems to me it makes more sense to just buy the black overlays 🤷‍♂️ unless you’re using a color not offered.

@AZOverland2017 3 месяца назад

Still have it on. Emblems are perfect. Wheels look very good with some delamination at the very outer rim

@michelleevans9869 Год назад

My alloy rims on my Mazdas are peeling and was wondering if it would work on it ? Nice vid

@AZOverland2017 Год назад

Thanks. If they are peeling you would need to get all of that coating completely off first before refinishing them or the top coat (Hyperdip or whatever you paint it with) will peel with whatever is under it.

@michelleevans9869 Год назад

Ok good to know.👍

@luisarroyo5168 Год назад

Do you think I’d be able to use this hyper dip on chrome rims?

@AZOverland2017 Год назад

Possibly. From the website (they say PlastiDip but the same holds true for HyperDip): Since are differences between genuine chrome and factory "chrome" finishes. Plasti Dip may adhere and react perfectly normal over one chrome surface, but may have issues over another. Chrome emblems, badges and trim are traditionally fine - but a certain set of chrome wheels for example may cause adhesion issues. Due to the differences between the many "chrome" surfaces, it's difficult to predict the result for each application. Although it works fine most of the time, testing may be required first to confirm Plasti Dip is a suitable product for your personal application.

@luisarroyo5168 Год назад

@@AZOverland2017 thanks for the information. I'm going to try to test a small surface before buying the whole set of Hyper Dip.

@Troche571 2 года назад

Rock sliders, or Armadillo RS side steps?

@AZOverland2017 2 года назад

These are actual rock sliders which is what I needed. They bolt heavily into the frame rail to provide maximum protection if going over a large rock or similar and coming down hard near the rocker panel area. Also protect in other ways the side steps wont. Depends on what you like to do though

@tonetracing9887 6 месяцев назад

Cuanto tiempo hay que esperar para retirar las cintas azules?ssludos de Spain👍

@AZOverland2017 6 месяцев назад

Depende de la temperatura. Pero unos 30 minutos

@MetsFan5153 11 месяцев назад

What color did do you for your hyper dip? Shadow black, piano black?

@AZOverland2017 11 месяцев назад

Shadow Black

@bmoser02 10 месяцев назад

Curious if scuffing the rims with sand paper would help with adhesion? Thanks!

@AZOverland2017 10 месяцев назад

I don't really see a reason to scuff. I did this almost 2 years ago and do not have any issues with adhesion. As long as you prep correctly and do those 1st few tack coats, it will adhere to the substrate (wheels, emblems, etc). I also don't think scuffing would be beneficial anyway, being a former auto body tech who has painted cars for years. There is a distinct difference between automotive paint in which you scuff the substrate for adhesion and a product like this.

@bmoser02 10 месяцев назад

Right on, thanks alot man!!!

@thedirtydiana863 2 года назад

Did you get any overspray on the actual body of the 4Runner?

@AZOverland2017 2 года назад

I did notice overspray on the back window, other than that, no. It was minimal and came off easily with a razor blade.

@dmanimousprime3858 Год назад

I was curious about overspray as well. My GX is white and I'm going with Piano Black. Probably taking the wheels off!

@makamaka6685 11 месяцев назад

How did it last after a year

@AZOverland2017 11 месяцев назад

Here ya go. I did a video on it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z1Ybi_gCz2s.html

@primate888 2 года назад

Does it hold up going through a car wash

@AZOverland2017 2 года назад

Yes. I took it through the carwash and made a video. Then took it to the Costco carwash and still no issues. Video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5QWPJvWGTk4.html&ab_channel=AZOverland

@flashg2910 Месяц назад

What happens to this when you rotate your tires?

@AZOverland2017 Месяц назад

I did a video that should answer your question: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UnvQ9pRUcE.html

@clintro Год назад

How has it held up?

@AZOverland2017 Год назад

I'm actually shooting a video tomorrow to answer that question. Stay tuned, it will come out later this week after I do the editing

@RandJFunkyFinds 8 дней назад

Overall, how long did it take you to do this and it sounded like you did 12 to 15 coats per tire. I just scooped this up for my 2008 Toyota sequoia. Great video thanks!

@AZOverland2017 8 дней назад

I think it took about 4-5 hours but that included the front and back in addition to the wheels. I think 10-12 coats is sufficient if done correctly. Good luck!

@RandJFunkyFinds 7 дней назад

@@AZOverland2017 Thanks again for responding. I actually did buy emblems,grille and back hatch already, and they turned out great.

@365AdventureCo. 2 года назад

How does the color hold up? I did my grille a while back and I feel like the color faded in AZ

@AZOverland2017 2 года назад

Did you use Hyperdip or Plastidip? I think I'm coming up on 8 months and no fade yet with the Hyperdip. We are just getting with summer now so I will report back in a few months with updates

@365AdventureCo. 2 года назад

@@AZOverland2017 I used the basic black plasti dip , I might try the hyper dip

@AZOverland2017 2 года назад

@@365AdventureCo. Definitely try the Dip. You may have better luck with it over the Plastidip👍

@ausguy4385 2 года назад

does dip cover imperfections better at all?

@AZOverland2017 2 года назад

It has the potential to hide minor imperfections. Depends on what it is...

@horhay1981 Год назад

How are the wheels holding up?

@AZOverland2017 Год назад

I've done an update about 1 year later here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_RprxIX2NX0.html

@binugeorge4765 Год назад

Thanks it really helped to do on my wheels.. can you share the link to the roof rack. I like it. Pls

@binugeorge4765 Год назад

I tried searching but no luck … pls share the link. Thanks @AZOverland2017.

@AZOverland2017 Год назад

Thank you. Here is the information on the roof rack. I will try to find a link for you but there are so many options for it. It is the Rhino Platform Rack. The size of the rack is 49"w x 60" L. I am using the Vortex SX crossbars that attach to the factory rails. I believe the part # is JA9141 which is the legs and the bars or the separate part #'s are SX100 for the 4 legs and VA126B for the 2 black crossbars. Please confirm all #'s

@AZOverland2017 Год назад

@@binugeorge4765 www.rhinorack.com/en-us/products/roof-racks/platforms-and-baskets/pioneer-platforms/pioneer-platform-60-x-49-unassembled_52100f

@binugeorge4765 Год назад

@@AZOverland2017 Thank you so much !

@JAY-lu3cx 2 года назад

Question when u backed it up outside did u remove the plastic bags behind your wheels??

@AZOverland2017 2 года назад

That's a great question! I actually forgot originally and backed it out a few feet before I realized. Thank goodness the plastic only touched the wheel in 1 spot on the edge. It was easily covered with the remaining coats

@JAY-lu3cx 2 года назад

@@AZOverland2017 Thank u for responding and u did a great job

@AZOverland2017 2 года назад

@@JAY-lu3cx I sincerely appreciate that sir

@FerdySantiago Год назад

Did you apply the dip release outside the emblems and the pre-dips on the emblem too?

@AZOverland2017 Год назад

No Dip Release for emblems. Prep it thoroughly with the Pre Dip paying extra attention to the emblem edges. Make sure you do the recommended # of layers so it is thick enough to grab an edge for pulling when dry

@FerdySantiago Год назад

@@AZOverland2017 Thanks! Last question, did you use the same spray on the emblems as well or did you have a separate spray meant for the emblems only?

@AZOverland2017 Год назад

@@FerdySantiago It was the same.

@cynicsupreme 2 года назад

How does it come off the tire?

@AZOverland2017 2 года назад

If it's put on the way it's recommended it will peel off. Start at an edge and it pulls off in sheets. They also make a spray dissolver for any hard to get or stubborn spots

@tombox2759 2 года назад

really nice

@AZOverland2017 2 года назад

Thank you!

@tombox2759 2 года назад

@@AZOverland2017 How is the paint holding up as time goes by?

@AZOverland2017 Год назад

@@tombox2759 Woe sorry for the delayed response, I somehow missed this question. Overall, excellent. I just noticed a small peel on the edge of tone of the wheels where the tire and rim meet. It is not bad but I suspect it could get worse over the next few months. With the grill area, I neglected to keep up with washing it after many road trips on the highway and it looks like bugs got imbedded in there. I haven't attempted to clean it yet but I am hoping I didn't wait too long to do this.

@shawnsponds 4 месяца назад

Looks great new and fresh ... does not last beyond 2 months of brake dust

@AZOverland2017 4 месяца назад

Absolutely does. See my response to your other comment

@tls5669 2 месяца назад

Its Christopher Lee!!!

@shawnsponds 4 месяца назад

I tried it... after leas rhan 2 months the brake dust destroys finish ... lots of work for not much lngevity ...

@AZOverland2017 4 месяца назад

I have had this on for almost 2 1/5 years now and it still looks good. I did not experience what you did. Maybe yours was not applied thick enough or the coats weren't wet enough. I'm not sure what happened, but you can see the condition of my wheels after 1 year here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_RprxIX2NX0.html