HOW TO PAINT BRAKE CALIPERS | Easiest Method | No Taking Off ANY Bolts Or Nuts 

😂

@@alpha42069 lool

​@@alpha42069Christmas to

Don't support OF.

Simp

Agreed. Forward, direct and time efficient

Fr

9

I subscribe at the end of his first sentence, earned it

Facts i dont even subscribe to nothing on this app 😂 he too thorough wish I could suscribe 1000 times great information 👌🏼

U CAN 💪🏿💪🏿💪🏿

Locked in 😂 😐

i recommend not painting the brake pads. they don't show with these wheels...on my car, they do.

@@dougburg3210 I've painted my calipers it turned out fine and doing so as detailed as possible.

Great advice! My brother painted my black mustangs ' calipers. He's the one that had a garage..I didn't. Yet he painted the calipers outside. Needless to say I was very angry at him.. red overspray on the front end of the car. Car was only a few years old! What a dummy! I was introduced to the almighty clay bar.. where the blue clay bar turned purple from all the overspray. Now, a bunch of years later, I will do this myself (girl power!) in my 2 car garage & do the job RIGHT this time. #brothersAreDumb #brothersSuck

Yes people forget old school brushes. And that method will lay on a thicker coat of paint.

Why not take the caliper and bracket off the freaking car?

OMG. I thought I was the only one who noticed that! Bad job at masking and way too much product per coat.

I was wondering the same thing but man this is a pain in the a$$ to tape off those brake pads, can i go without

Yes sirr! That's what we do it here!

More. Idea

LOL! Yeah, I love the videos that start with...."I was born many years ago......"

@@benfields9774 1l5l11l11l1111111

Lol😅

Great tips!

I took your advice and the job came out great!.

Good primer tips and awesome vid. Will be doing this as soon as my new rotors and brake pads come in soon. Also , should i throw on a coat or 2 of clear coat ? 2 coats primer , 3 coats top coat then 2 coats clear ? Or would the clear be unnecessary

Any IDEAS how many primer and paint sprays we need for 4 calipers??

@@AmritpalSingh-zj9kd two cans of each will do your fine. like buddy said you want to make sure you lay it on thick enough so it protects and lasts longer

Doing my soon this week. Getting new rotors and brake pads for the third time on my car, no biggie but putting in new struts and control arm. Going to follow this up by listening to you on the Walmart part getting supplies and ready to see my wheels pop! 8 hours isn’t bad at all.

Did you buy 1 of each liquids (prime, paint, clear coat, break cleaner) or you had multiple?

@@Topic_____542 only bought one of each, I still have some left ~1/4-1/2 in each can

@@Topic_____542 I'm not him, but I did mine and I recommend double the amount. A lot of the spray goes into the air and you have many angles to spray. You'd rather have paint leftover than to run out midway into the job. Wear a Covid mask the whole time. Good luck 🤞

@@MrBikedrummer Thanks I just did mine took me 2 days and I love it

Hahahahha. Glad to help. Honestly that's why I started an automotive channel in the first place. Too many people rambling about nothing. Not enough QUALITY automotive channels!

@@BuddysDIY Well, you can check that box! And, yes, I subscribed! Just wish I could do it twice. LOL!

@@BuddysDIY Found this on FB and thought you could get a laugh. Prolly get me banned from YT if they read it. "So, there’s a rumor on RU-vid that there are going to be a number of amendments for RU-vid posting. Keep in mind these rumors have not been confirmed: 1.You are only allowed to use the word, “basically” once per video, no matter the length. 2. If the poster starts with, “What’s up guys?” Hey, what’s up, guys?”, “What’s goin’on?” or, “Hey, RU-vidrs, how ya doin’?”, that individual must stop for ten seconds to allow RU-vidrs to respond. 3. Clickbait that has nothing to do with the post or it has been photoshopped (as in, “Largest plane to land on carrier deck.”), the poster will be immediately and permanently banned from RU-vid. 4. Titles may no longer have the words, “best, worst, most, least,”, or any word ending in “est” or “ly” 5. Any videos starting with screeching, screaming, big-hair heavy metal of late 70’s-early 80’s genre will receive one warning. 6. Any video with more than a 30 second talking introduction will receive two warnings. 7. Any stolen and uploaded videos that hide the trademark by making the video long and narrow must pay a $50 fine per stolen upload. 8. Anyone using a bot for “text to talk” video will receive two warnings and must declare from what country the video was uploaded. This may also be required for stolen uploaded videos"

@@tomperkins5657 hahahahha yeah no way that's true 😂

@@tomperkins5657 l! opp

Lol

Yes sir. If you want send pics to buddysdiy@yahoo.com. I'd love to see!

Repent to Jesus Christ “But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.” ‭‭Isaiah‬ ‭53:5‬ ‭NIV‬‬ I

He's right up there with Eric The Car Guy and Chris Fix.

Subscribed - straight to the point👍

Appreciate it man. 100k would be awesome

I'm new to TAKING GREAT care of my car and ah big fan of any type of customs ....so yeah...I'm ah Ne Subscriber today in no time

I’m thinking about spray painting mine. how has yours held up after a year?

@@patrickolds2248 It’s still looking good with minor chips which I can touch up. If I can do it over again I would add additional coats.

I got a few 7th gen Accord vids! Power steering flush, brake flush video on it and a few others!

@@BuddysDIY i’ll be sure to check them out it’ll help give me an idea of what i’m doing i’m sure i subbed appreciate the straight forward help!

Thank you brother!!

I think you definitely should do this as well

Definitely the clear coat

The problem with the paint that he's using is that it is not ceramic part of the reason why you want to use ceramic is because it will last a lot longer

@@userokg751he said he’s been using this paint for over 10 years and they last a long time. I think he knows what he’s doing.

Repent to Jesus Christ “But he was pierced for our transgressions, he was crushed for our iniquities; the punishment that brought us peace was on him, and by his wounds we are healed.” ‭‭Isaiah‬ ‭53:5‬ ‭NIV‬‬

My man!!!

How long did you wait before drivjng again? A couple hours should be enough I’d think as long as I’m not putting full load on it yet

The car flipping videos on the channel page are my subs favorite by far. Check one of those out and let me know what you think!! Glad to have as a subscriber!

My man!! Appreciate that

GermX lol

Best of luck!!!

Thank you my friend

the brakes will eventually be replaced anyways so that won’t really matter in the future :)

@@chrissy1475 well it depends if the customer have changed the brake pads recently then I don't think it looks professional

@@WajahatAli-yz6kt maybe so but brake pads do eventually wear down. they would have them replaced and the issue would resolve lol.

:)

He has a stand under the car if you look.

That shits painful. Hopefully you recovered quickly.

If you are using a cross handle wrench, put your foot on one side and pull up on the other. Much more torque with less effort, and no offset on the nut, just straight torque.

Pulling gives more control when nuts break free. Pushing could cause you to lose your balance or hit your knuckles.

@@SJ-me9fj Yep ^^ never push on a wrench unless you have no other choice.

Invest in a torque wrench and an impact driver. Save your back.

Appreciate it brother! :)

@@BuddysDIY your welcome, gonna do this to my trans am thanks to you

Hahaha thanks man!

🤔Hmmmm, you're right! Still love the video tho😄⭐⭐⭐⭐⭐ Forgave him because of the no nonsense intro😎😄

He did not take the caliper bolts off. What don't you understand?

@@stephenkuschel7459 Wow really? Are you that dense? The owner of the channel even got the joke and thought it was funny. Nobody said anything about taking off the caliper bolts (which he did not do). Please read (and comprehend this time) the comment again BEFORE making your snide remarks. It refers to taking off the LUG NUTS, of which there are 20 of (5 per wheel), and yes, he did remove them. You, my friend, are one of the major problems of the world today. You speak without understanding what you are even talking about. Go back to mommie's basement now and contemplate your sad life. SMH 🙄

Gonna comment this also hahahha but great vid

Hahah appreciate that man!! Mine shows number three! What about you?

Yes sir I'm cold weather that can help!

I was about to comment the same. Take an extra 10 minutes and disassemble everything for paint. Makes a bigger impact when the pads are still the original color.

You are correct. Take the brake off then spray. This paint is not for brake. it will over heated. It will only last for 1 year. The paint chips will stuck on to you brake pad.be careful. this is friendly suggestion. @@claywilliams8128

Brake cleaner wrecks all paint.

No!

Thanks Todd!!

Well if you're a regular driver like most then you don't gotta worry but yeah I agree

Very RARE to have calipers reach that temp in a work car!!! I don’t have time to tell you how rare it is! Great video!!!🌹

@@Justmi2cents I did say the ROAD COURSE. I imagine you probably don't drive your work car on the road course.

I did it with one tall but if u do it with small cans get two just to make sure.

@@MASK-pp6hq thank you!

Was thinking the same!! I take mine apart once a year just to clean and grease those sliders, and he just painted them!

Roman you should make a safety video about which parts not to paint on the break calipers

Right? Second, If I was going to tell someone new how to do this, I would rather recommend using actual caliper spray paint, or high heat spray paint from autozone or whatever. Regular rustoleum will just chip and flake in the long run on parts that get semi hot. lol

@@Brakzillaa shits gonna just flake off in a month

Glad to have you brother!!

Haters gon hate. What you gonna do 🤷

I’m a female but thanks glad to be here

@@Stayingtrue777 glad have you milady!