hyundai getz 1 1 timing belt change part 1 

Get your ratchet as close to the bolt as possible. Using an overly long extension just causes more torsion on the extension possibly stripping the head due to slipping

Word of advice; don't use the ratchet to initially break the bolts free. You can potentially damage the internal mechanism. Always use a breaker bar. They're tough enough to deliver the initial high torque required to free the bolt. Then use the ratchet to speed up the loosening process.

A simple tool to keep the pulley steady, is advisable. This fellow has no friggin' idea !

Im off to the garage, thats too painful.

Show the coolent drain in Getz..

Hi! Wich number av sleev you use, 17,18,19 mm,

I like your video.

Watch the video at 2x speed.

Sir.. Patulong naman po.. Alternator belt size po.. Getz 1.1.. Salamat po.. Pls

dont give up your day job to be mechanic just yet 1you will hurt your self 2gonna lose a shit ton o money

Du sollst große knarre benutzen, so geht Es nicht.

Wrong size hammer mate.