Hyundai i30N Hatch PD (2018-2020) - Flow Designs Full Splitter Kit Install 

Freshly installed Flow Designs Splitter Kit for this i30N Hatch PD (2018-2020) giving it a whole new look.
0:00 - Intro
0:29 - Side Splitter Install
0:58 - SIDE | Step 01 - Jack Car Up
1:07 - SIDE | Step 02 - Align Supplied Template under side skirt
1:25 - SIDE | Step 03 - Pre-Drill Template hole
1:34 - SIDE | Step 04 - Drill holes with 11mm Drill bit
1:43 - SIDE | Step 05 - Insert 1st Jack Nut
1:53 - SIDE | Step 06 - Use Jack Nut tool to tighten nut
2:44 - SIDE | Step 07 - Place Side Skirt in place + Install Jack Nut
3:09 - SIDE | Step 08 - Pre-Drill remaining holes - 8mm Drill
3:28 - SIDE | Step 09 - Remove first installed bolt
3:42 - SIDE | Step 10 - Use 10mm Drill and Widen holes
3:53 - SIDE | Step 11 - Install remaining Jack Nut
4:02 - SIDE | Step 12 - Fasten Remaining Jack Nuts
4:25 - SIDE | Step 13 - Bolt Side Splitter in place
5:24 - SIDE EXTRA | Step 15 - Bolt in additional Winglets
5:55 - Rear Splitter Side Install
6:10 - REAR SIDE | Step 01 - Remove Rear Guard Cover
6:33 - REAR SIDE | Step 02 - Line up Spat and Mark Holes
6:58 - REAR SIDE | Step 03 - Drill Holes with 8mm Drill Bit
7:10 - REAR SIDE | Step 04 - Setup Nut & Bolt Combo for installing
7:30 - REAR SIDE EXTRA | Step 05 - Install Additional Winglets
7:55 - Rear Flow Lock Diffuser Install
8:16 - REAR DIFFUSER | Step 01 - Install Fins onto Diffuser
8:48 - REAR DIFFUSER | Step 02 - Align + Mark holes on Diffuser
9:22 - REAR DIFFUSER | Step 03 - Install + Tighten Bolts
9:31 - Front Splitter Install
9:36 - FRONT | Step 01 - Remove OEM Weather Strip
9:57 - FRONT | Step 02 - Remove Undertray
10:12 - FRONT | Step 03 - Bolt Splitter in Using 2 Rear Factory Holes
10:27 - FRONT | Step 04 - Bolt Splitter in place
10:48 - FRONT | Step 05 - Install Chicago Bolts
11:09 - FRONT | Step 06 - Install reinforcement bracket
12:11 - FRONT EXTRA | Step 08 - Layout Nuts, Bolts & Winglets
13:09 - FRONT EXTRA | Step 09 - Bolt in Winglets
13:40 - Outro
-----
Get in contact with us if your interested in getting a Flow Designs Splitter kit installed on your vehicle.
All splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market.
#flowdesigns #hyundaii30n #exclusivewraps

Авто/Мото