Hyundai & KIA REAR WHEEL SPEED SENSOR REPLACEMENT

Подписаться 4,1 тыс.

Просмотров 154 тыс.

50% 1

#abs #brakelight #speedsensor
If you have brake light or ABS light on, consider wheel speed sensor replacement.
Part No. 52751-2B100
The video is applicable to the
Hyundai Santa Fe FWD 2007-2019,
Kia Sorrento FWD 2010-2019,
Kia Sedona FWD 2011-2019,
Same as or similar to
Hyundai Sonata 2010-2019
Kia Optima 2010-2019
(Not applicable to any 4WD)
🔧 Tools used:
Bluedirver OBD scanner
Flat head Screwdriver
#2 Phillips screwdriver
Lug nut: 21mm Socket + Impact gun
Caliper: 14mm Socket and offset wrench
🔧 Basic shop tools:
Floor jack and jack stands
Torque wrench
Power tools

Авто/Мото

Опубликовано:

21 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 223

@edsimpson4343 9 месяцев назад

As others have said so well, excellent video. In my case, I would have probably spent around $400, but even then it would have taken two months for an appointment. The clarity of this video allowed me to brave the repair myself and I couldn't be more pleased with myself. (lol) Cost: $84 for diagnostic report, $17 for sensor from Amazon. Now I look forward to saving $84, next time, by using my new diagnostic scanner ($98.99), and @chrisfix will be my first stop every time.

@_yamech7533 9 месяцев назад

Such a great comment!! Thank you!

@ricardoampie4194 9 месяцев назад

Can you tell us what kind of scanner did you buy? Thanks!

@_yamech7533 9 месяцев назад

@@ricardoampie4194BlueDriver. Its $99 on Amazon

@Twspivey95 5 дней назад

2014 Santa Fe. Saved hundreds of dollars for the price of a sensor, offset wrenches, and a Saturday morning. Thank you sir.

@yesimerin Год назад

Echoing all the other comments, but EXCELLENT video!! Straightforward and to the point without being confusing or leaving anything out. New sub for sure. And thank you!

@ro5245 Год назад

Thank you! Just swapped out mine on a 2017 Kia soul. Very clear instructions

@robross4815 Год назад

Excellent video! You saved me over $400 in Dealer repairs costs by showing all the steps so clearly.

@_yamech7533 Год назад

Glad it helped!

@rod3134 3 месяца назад

Thanks so much for the information ❤❤❤ The dealer wanted over $1000.00 for the same repair. I did it myself for about 90% less money and completed it all in less than 2 hours. Many thanks, my friend 😇🙏🏽

@_yamech7533 2 месяца назад

Glad it helped

@Jeffvangully 10 месяцев назад

Saved me a ton from the dealer. Had to remember to disengage the parking brake to get the rotor back on. Excellent video!

@_yamech7533 10 месяцев назад

Glad it helped!

@KLDprojects1 2 года назад

Thank you, your video saved me a ton of money! It was an easy project as it only took a couple of hours with 4 beer breaks.

@_yamech7533 2 года назад

I'm glad to hear that. Thank you for sharing your experience.

@garybanim4906 2 месяца назад

Extremely well made video it is obvious you spent a lot of time making it! A perfect tutorial easy to follow step by step the tools needed ! Thanks! ( can you make one on raising teenagers please 😞)

@user-eg9ke3ny9g 2 месяца назад

This was great. Other videos say you have to replace the bearing along with the sensor because they come as one unit. Which is $50 vs $10 per wheel. Love that he showed how to test that the sensor is bad too. My sensor ohm'd out ok but when a magnet was placed next to the sensor the ohms did not drop toward 0 (Replacing the sensor fixed my problem).

@mauserdude 2 года назад

Thanks for the great video. This fix worked great for my 2016 Hyundai Sonata. The only differences are: do not need 14mm angle wrench and the emergency brake backing plate needs to be removed. Thanks again!

@_yamech7533 2 года назад

Good to hear that!👍

@johnnyfive33 4 месяца назад

I don't usually comment, and sometimes prefer not to listen to people with strong accents that my be difficult to understand but this guy was excellent! Excellent, detailed instructions, excellent video work, excellent tips, everything was great. Thank you.

@_yamech7533 2 месяца назад

Thank you for the wonderful comment. I hope it was helpful.

@kingdoge788 Месяц назад

Very good demonstrative repair video with some quality background information about how the sensor functions. Thanks man! Liked and Subbed.

@kenkercher8076 Год назад

Thanks for this video. Just replaced both rear sensors on my ‘17 Tucson. Worked great! 👊

@_yamech7533 Год назад

Glad it helped!

@aroberts3213 10 месяцев назад

very helpful video. Saved me $500+ from dealer fees. Bought the part online for $30. Thank you sir

@_yamech7533 10 месяцев назад

Glad it helped. I guess five hundred dollars is the standard. All dealers across the United States charge the same rate.

@rzorrilla52 6 месяцев назад

Saw other RU-vid videos on this... By far this is the best one with the best lighting/video angles. Dealer quoted me $550 USD for this fix. Sounded way too high for me. On my 2018 Hyundai Santa Fe Sport replacement, removed the entire caliper bracket along with attached Caliper (squeezed a little caliper cylinder w clamp to ease removal/installation of entire Caliper Assembly). The use of the offset 14mm wrench - bought a set for this fix - to remove the lower bolt on the caliper bracket was invaluable, else it would required more disassembly in the rear suspension, something I was not willing to do.

@_yamech7533 2 месяца назад

Thank you for sharing your experience. I haven't used an offset wrench since this one.

@kayinlai-lairealty4630 7 месяцев назад

Great video and great job!!! The video helps the consumers to know what will the dealer do with your car. 😅

@darkdelta Год назад

Well done, Sir. I had this replaced at the dealership, I thought my car was still in warranty but ti was out by a couple of months ended up costing me $260 or so. I have a code reader so if it happens on another wheel, I'll do this on my own. Thanks for posting this.

@5ohty Год назад

they just quoted me 659, doing this shit myself

@_yamech7533 Год назад

I don't think $260 was a bad deal. Thank you for sharing your experience.

@rvtechman3619 11 месяцев назад

Excellent. This was a big help in replacing the rear wheel speed senser in my 2017 Sorento (FWD). There was only one minor difference with accessing the brake caliper bracket bolt, and I did not require an offset 14mm wrench. My adaptive cruise and front camera also didn't work because of this failed senser. I bought a KIA OEM senser (

@_yamech7533 11 месяцев назад

I’m glad to hear that! Thank you for sharing your experience.

@joselucio7844 5 месяцев назад

Boa noite amigo, acredito que estou com o mesmo problema. Tenho um Kia Sorento, e ascendeu a luz do sistema DBC no painel e não apaga. O problema no seu carro era esse?

@redbonetony22 28 дней назад

Thanks for the electrical specifications.

@aneurisbido9057 Год назад

This video saved me some money. Thanks to you I did not buy the hub just sensor. Issue solved.

@_yamech7533 Год назад

Good to hear that and thank you for leaving a comment!

@SONYSTARMUSIC Год назад

You do it so easy great job my friend

@jknox4201 Год назад

BEST INSTRUCTIONAL VIDEO EVER 💯 ⭐️⭐️⭐️⭐️⭐️

@jbstillman Год назад

I wish I could give you more thumbs up. I bought the rear sensor for my wife's 2017 Tuscon.... but it's the wrong part. EVERY single part search is the exact same wrong part. (wiring harness with plastic single bolt plug sensor). What I see when I pulled the wheel off is this very thing you're replacing as the only sensor on there. I have no idea why ours is different than every single sensor listed for this vehicle. I wonder if there was a revision or something mid-year for our model or something where this sensor was changed for the one in your video. Well... I can take back the $125 part, and purchase the $20 part now. Thanks so much for this video!

@_yamech7533 Год назад

Thanks for sharing your experience. I can feel how hard it was. The probe type sensor is for the front wheel only. Cap type sensor is used on rear wheel and it is sealed with the wheel bearing. Thats why its soled separately in official parts shop. Good luck.

@leneichler4538 9 месяцев назад

excellent - well done and I appreciate the tips.

@C2Kids Год назад

nicely done video. very informative. thanks man

@chrisarreguin7363 2 года назад

Thank you so much for this video! Really helped me out!

@_yamech7533 2 года назад

Glad it helped!

@slimsautomotiverepair8714 2 года назад

great job man great video short to the point def a future in this

@_yamech7533 2 года назад

Thank you for your feedback!!

@enriquelopez9124 Год назад

Awesome video easy detailed instructions for the do it yourself mechanic

@_yamech7533 Год назад

Thanks 👍

@mikeb.884 27 дней назад

Dealer quoted me 450 for one, 700 for both. This video will help me do the job myself. I bought the genuine KIA part (20 bucks! on ebay), and an 8 dollar offset box end 14mm wrench. Thanks for the clear, concise step by step video! BTW ... Auto Zone diagnosed the problem even to which wheel sensor was causing the lights to stay on for..FREE!! Only thing I may do in addition is to put a little silicone caulk at the outer edge of the part before tapping it all the way down. KIA had a service bulletin on this 7 years ago for this car, and it said it will help keep water out which can wreck the sensor.

@mikeb.884 20 дней назад

I did this repair today. Went well after watching this video several times. On my 2013 KIA Sorento FWD I didn't need the offset box end wrench. But, after I finished, I started the car and the warning lights (ABS, ESC, downhill assist) still came on and stayed on. Rats! I pulled the car up and down the driveway. Still on. Disconnected the battery for about an hour. Nope..still on. Then, went for a drive around the block and the lights all went out! YAY! So...in my case it was different from the video which showed them going out immediately. So, if this happens to you, don't despair until you drive the car and spin the wheel fast enough for the sensor to pick up the signal. Thanks Again for the clear video!

@_yamech7533 5 дней назад

Thank you for info!!

@mikepelu13 Год назад

Excellent Job! you get a AAAAA+++++++ I will be replacing my in the morning! Thank you for not over talking! you get straight to the point, and i love that!! I will Subscribe to your channel

@_yamech7533 Год назад

Thank you for watching. I wish you made it!

@cutieblackpunkinkitty 8 месяцев назад

Its excellent video you give me an idea for my sta fe 2014

@barryk4451 3 месяца назад

FYI my 2017 Sportage used all SAE bolts on this job, except for the 19MM wheel nuts - ??? Great vid, thank you.

@_yamech7533 2 месяца назад

Most of bolt sizes are compatible. Perhaps it would have been possible to use metrics. In Korea, metrics are the standard.

@hptypework2694 2 года назад

Thank you, you are doing a great and profesional job and tutorial there. Hello from indonesia Sante Fe owner.

@_yamech7533 2 года назад

Thank you for your feedback!!

@henrijoelnk797 Год назад

Thanks Man, you just make me save $$$$$

@backlineguy 2 года назад

Thanks for the great video. Replaced my wheel hubs and cleared the code. Note: the clip on the connector can be pressed to release the connector rather than removing the clip...thanks again.

@_yamech7533 2 года назад

Good tip👍 I should mention that on next video.

@leletipiham8156 Год назад

Satisfying vdo. Thanks

@EstebanViquez 2 месяца назад

Awesome Thanks a lot

@johnwahl6301 Год назад

Excellent video, and even better editing. Thank you for getting right to the important stuff.

@nickprostizenovski6948 Год назад

Great video I've got a Hyundai ix35 and I've changed the Driver shaft and maybe I've done something to the sensor because it feels like the the brakes are on

@_yamech7533 Год назад

You may need to check wheel speed sensor and wire. If you did not remove sensor before take you hub bearing, sensor wire could be damaged.

@craighubachek8461 Год назад

Thank you for the video. Helped me a great deal on my 2015 Sonata Limited. Only the right side was bad, but replaced both sides. If one side goes bad the other side is right behind, right? Didn't need the offset wrenches as bolts were very open, but now I have a set so still a win. Bought 2 sensors from Hyundai dealer in NC, $53.33 for both with shipping.

@_yamech7533 Год назад

That was good deal. Thank you for sharing your experience!

@feldmanjared 11 месяцев назад

Thank you so much for this. Going to tackle this myself!

@_yamech7533 10 месяцев назад

Good to hear that. Thanks for the comment.

@feldmanjared 10 месяцев назад

@@_yamech7533 It didn’t fix my problem 😞 throwing same codes. I need to take it in to get it diagnosed. If they say I need new hub assemblies, I will do that myself considering I basically got that far to replace the sensor.

@serafinserafin1596 5 дней назад

감사합니다.

@_yamech7533 5 дней назад

도움이 되었나요? 작은 부품 교체하는건데 조회수가 10만이 넘어서 저도 얼떨떨

@vilisoniloloyasi5054 6 месяцев назад

Thanks for the video

@ukrsindicat 8 месяцев назад

Great video. Just one suggestion: measure the resistance in the beginning of troubleshooting to eliminate wiring issue as a potential problem. This could save time.

@_yamech7533 2 месяца назад

Good point! Thanks

@apogue81 2 года назад

Thanks for the video! Couldn’t get the new sensor into the hub assembly with a rubber mallet. It kept popping out. I tried your 2x4 trick and it went right in!

@_yamech7533 2 года назад

Im glad to hear that. Thank you for the comment.

@StevieBoy703 Год назад

Wow I got quoted $1,000 to replace both wheel hub assemblies!! Thank you

@_yamech7533 11 месяцев назад

I think $500 a side is an average price. But it still seems overpriced.

@prashant1875 2 месяца назад

good work bro

@manajc8954 2 года назад

많은 도움이 되었습니다

@_yamech7533 2 года назад

북미에 사시나요? 자가정비에 도움이 되었길 바랍니다.

@leathermule4824 7 месяцев назад

Very helpful Video 😊

@johnwagner8465 4 месяца назад

Great video,thanks so much

@_yamech7533 2 месяца назад

Glad you enjoyed it

@powerelectric879 Год назад

Thanks homie

@OlgaA234 Год назад

Wow ordered 8$ sensor going replace on Sorento dealer asking $670 for weel hub assy Thanks for the video

@_yamech7533 Год назад

Glad it helped. $670 is is the highest among the comments. its under 1h job for normally trained technician.

@OlgaA234 Год назад

@@_yamech7533 Bev Smith Kia of Fort pierce Florida they smoked good tobaccos!

@845970873 Год назад

Excellent video. I can do the task very easy.

@_yamech7533 Год назад

Glad it helped

@franklinbrown8417 Год назад

Thanks!

@grandtheo 9 месяцев назад

wow.... you are great partner

@KirillFrolenko 7 месяцев назад

Thanks 🙏

@vinmangob8555 Год назад

dam ill be driving without abs for awhile, it's -35 in canada right now, I'll wait till spring. Good thing I can drive without abs lol.

@FredAbels 5 месяцев назад

Good video… I have been looking for a video like this. Now I am wondering if I open up the speed sensor and wipe it down to perfect clean will it work again!

@_yamech7533 2 месяца назад

Glad it helped!!

@bcole96024 2 года назад

Excellent video! Saved me a bunch of time. Quick question - why did you have to remove the caliber and bracket separately? I think you could remove bracket and take off whole assembly. Saves a few minutes.

@_yamech7533 2 года назад

I think it will be possible to remove it, but it will be difficult to release the bolt under the lower arm.

@acollins9277 Год назад

Very help

@tonyfelipe6048 Год назад

Good job great video....i can change my hyundai rear sensor. new subscriber and thank you.

@_yamech7533 Год назад

Awesome! Thank you!

@EdgAdmRmz001 6 месяцев назад

great

@Idea63841 9 месяцев назад

대단합니다 500달러라고해도 저는 맡길듯요 작키도 obd진단기도 옵셋렌치도 없지만 있다고해도 내가 차량을 분해조립후 정상적으로 굴러갈지에 대한 확신이 없기때문에...

@_yamech7533 9 месяцев назад

처음시작이 어렵지 한두번 해보면 자신감도 생기고 감도 생기게 되더라구요. 이젠 타이어 교체빼고 카센타를 가본적이 없네요. 엔진이 망가지는 거만 아니면 앞으로도 계속 집에서 할거같아요. 댓글 감사합니다

@johndooley8837 6 месяцев назад

Great video! Thank you very much. Has anyone tried to replace that sensor without removing the bearing from the vehicle? It looks like it could be possible

@_yamech7533 2 месяца назад

It looks like it's going to be difficult because it's so deep.

@cutefriend 4 месяца назад

완전 쉽게 쉽게 하신다

@_yamech7533 2 месяца назад

이번작업은 난이도가 높은 작업은 아니었네요. 댓글 감사합니다.

@nappyh3ad83 4 месяца назад

I am about to replace mine on a 2017 Kia Sorento. Dealer wanted $750. I saw your video and said I’ll try to do it myself. I’m confused as to where to align the sensor like you said when putting it back on tho. Is there a groove indicating where the sensor should be?

@_yamech7533 2 месяца назад

All you have to do is remember the direction of the connector when removing it.

@twells7777 9 месяцев назад

Thanks man! When you say align the connector position, is there a mark to line up or something?

@_yamech7533 9 месяцев назад

I couldn't capture it in the video. Just point the connector towards a place where the bolt spacing is wide. The hub has no top or bottom.

@twells7777 9 месяцев назад

@@_yamech7533 Thank you so much my friend!

@backlineguy 2 года назад

What is "Fake Fix"? I have a 2013 Santa Fe Sport with exactly the same problem, and this looks like something I can handle. I do not want to give the dealer a dime. Great job with the video...I'm thinking I can do this...

@_yamech7533 2 года назад

I am imitating ChrisFix. I will make video that shows how I put it in practice what I learned from him. That’s why I named my channel FakeFix and I want to be a second biggest DIY RU-vidr following him. Thank you for leaving a comment. I believe you can make it.

@roberto5170 4 месяца назад

Hello, after I replace the front passenger axle of the Kia Sedona 2012 now I have the abs light on. Any suggestions??

@_yamech7533 2 месяца назад

I suspect that the speed sensor wire was damaged while replacing the axle.

@warwickhunt Год назад

Great video, which scan tool are you using?

@_yamech7533 Год назад

Its Bluedriver($120). Its easy to use but overpriced. If you need to scan the code only, FIXD($40) can be a great option.

@saifulrizalsuleiman7282 Год назад

Tq bro for upload this video.saved $500 😂

@_yamech7533 Год назад

Welcome 😊

@apuapustaja5125 4 месяца назад

I did this repair on an i30 but now I have a red exclamation warning sign on my dash board do you know what the cause or issue is?

@_yamech7533 2 месяца назад

It seems to be a brake-related warning. Scan the code with OBD tool.

@petrarabbit3995 2 года назад

How soon do you have to change it? Is it safe to drive when it comes on. and what causes it.

@_yamech7533 2 года назад

This is not a consumable item, so you don't need to change it unless it's broken. If the ABS warning lamp is on, the vehicle may lose control in an emergency braking situation.

@greengopher2354 Год назад

I have a 2014 Santa Fe limited V6 FWD. Mechanic said ABS code was for rear wheel speed sensor but for this model I need to replace the whole assembly. How can I confirm if that's true?

@_yamech7533 Год назад

That is true. Dealers don't distribute sensors alone. it is delivered only as an assembly. The method in my video is a shortcut. This is not an official repair method. Replacing whole assembly is manufacturer’s recommended method.

@inoxlebossggv2818 Год назад

Hello , what is the device for diagnostic errors that you us please, thank you for answering , and your help for this video

@_yamech7533 Год назад

It is called Bluedriver. You can find it on Amazon.👍

@inoxlebossggv2818 Год назад

@@_yamech7533 thank you 👍👍

@carlitosway01 2 года назад

Thanks for this video,. Great job! My 201t5 Santa Fe is displaying this error code for both rear sensor (C1208 and C1209) I am thinking of just replacing the sensors and not the whole hub since they look good but not sure if worth the extra investment and buy both…

@_yamech7533 2 года назад

If you have FWD, most of vehicle weight is on front side. All heavy powertrain components are supported by front wheel . Not much load on the rear wheel. I am confident that the rear wheel bearing will not get worse before the front wheel bearing. So consider how much you use your payload in the rear.

@carlitosway01 2 года назад

@@_yamech7533yes it is FWD and use has been very light. The bearings look good I tried cleaning the sensors tu that didn't work so I will try changing the sensors. Whish me luck lol

@_yamech7533 2 года назад

Why don't you test a resistance before purchasing a new one? The new OEM product had a resistance of 400kohms. see 02:52

@carlitosway01 2 года назад

@@_yamech7533 Yes, I saw what you did there. I will try that first just to make sure the sensors are the actual problem. Your video has been very helpful man and thank you for taking the time to reply I appreciate it.

@mitrovicmarkoo 8 месяцев назад

I have a question. Does this works on Kia Sportage 2014 as well? Got same DTC code. But cannot find bearing sensor anywhere for my Kia?

@_yamech7533 8 месяцев назад

As mentioned in the video, dealership parts center do not sell sensors alone. Search for wheel speed sensor that fit your car model on Amazon or eBay. This video is only for FWD. not 4WD

@mitrovicmarkoo 8 месяцев назад

@@_yamech7533thank you for your time and good answer!

@ivanfoong6406 6 месяцев назад

Hi Chris, may I know what brand or model scanner u use on this video?

@_yamech7533 2 месяца назад

Hi. I am not ChirsFix. I am fake of him. LOL. It was BlueDriver. cost about $99 back in 2020.

@accesorioselectricosmk4677 10 месяцев назад

Hi friend, where can i buy that wheel speed sensor and abs sensor For a kia sorento 2014 2.4 gdi

@_yamech7533 10 месяцев назад

It is Front wheel drive? Search 52751-2B100 on eBay.

@erwineslao 9 месяцев назад

Sir how about if the scanner said wheel speed sensor/performance/intermittent are the result. What will we will do? We will replace the speed sensor ?

@_yamech7533 8 месяцев назад

Search code number like C1208. Description from scanner is not very accurate. Find out DTC code and search possible reason of that code.

@magdalenetan87 9 месяцев назад

excellent and legit

@_yamech7533 9 месяцев назад

Glad you think so!

@jmc9678 9 месяцев назад

Could you check please! Can you possible decomposition sensor only like 3:13" Fig?

@_yamech7533 9 месяцев назад

I don't fully understand the question. The black cap is the sensor itself. It's just one piece of plastic. If you have any more questions, feel free to leave a comment at any time!

@jmc9678 9 месяцев назад

@@_yamech7533 Thanks for your quikly answer. I will check it again.

@frankfijer3531 Год назад

Hey gudday I watch your video about abs brake hill descent light does not comes off. It is suitable also on kia sportage 2019 cause mine lights off does not comes off. Just asking I'm from the philippines

@_yamech7533 Год назад

If it is Front Wheel Drive vehicle, Yes. it will be similar to Hyundai. But make sure OBD2 Error code before replace sensor. ABS light may be turned on for other reasons.

@amos7893 4 месяца назад

Hi where did you get the manuals? I am looking for i30.

@_yamech7533 2 месяца назад

If you are replacing rear wheel sensor on a front-wheel vehicle, it would not be much different from the video. The front wheel sensor is a different story because it is shaped like a stick rather than a cap.

@mikeosborne2857 Год назад

how do you align the connector position? Is there something that tells you where to place it on the new one?

@automechanic904 Год назад

Just guess it will either have a different spacing near it or you could use a colored marker on hub and old sensor before removing to try line up same spot for new one

@mikeosborne2857 Год назад

@@automechanic904 I did the marker and it worked like a charm. Thanks for the help! much appreciated.

@_yamech7533 Год назад

@mikeosborne2857 Thank you for participating in the knowledge sharing!

@2Shortcuts 6 месяцев назад

best of all was the quality of the video at every angle. "a big plus" So, there is not an easier way to follow. Thanks.

@_yamech7533 2 месяца назад

Glad you liked it!

@John-vc8qr 9 месяцев назад

I am curious what part inside the original sensor failed?

@_yamech7533 9 месяцев назад

I haven't teardown it, but as the resistance was too high, it is suspected that inside coil has been disconnected.

@lacetti85 Год назад

buen trabajo y gracias por el video

@_yamech7533 Год назад

Gracias por tus comentarios.

@DrKiLLeR_Play 3 месяца назад

On my 2015 Hyndai Tucson, the ABS started to work without an error, but the system does not show an ABS error. Do you know what could be the reason?

@_yamech7533 2 месяца назад

If there is no ABS error, it is resolved, isn't it? What error are you expecting?

@DrKiLLeR_Play 2 месяца назад

@@_yamech7533 The error is not shown on the display, but the ABS continues to activate every time you brake.

@_yamech7533 2 месяца назад

It seems not Speed sensor issue. Check Brake Control Module

@virtualpenman Год назад

Anyone know if this part would be relevant for a AWD Sante Fe? All the parts say 2WD

@_yamech7533 Год назад

AWD sensor does not look like "Cap". It will look like probe.

@warrickgonzalez7499 Год назад

What is the brand and model of that code reader?

@_yamech7533 Год назад

It is BlueDriver OBD2 scanner.

@scottloco9180 2 года назад

Is this the same part for my 2016 Kia Sorento?

@_yamech7533 2 года назад

No. Part that shown on this video is for 2007-2017Hyundai Santa Fe 2WD and 2011-2015 Kia Sorento 2WD. I believe replace procedure will not much different with 2016. Just make sure your part number.

@User-8211 10 месяцев назад

쇼츠에서는 디스크에 무엇을 바르던데.. 그게 뭔지모르겠네요

@_yamech7533 10 месяцев назад

브레이크 클리너를 뿌리는걸 보신거 같네요. 새제품에는 운송과정에서 녹슬지 마라고 기름코팅이 되어있는데 클리너로 닦아주고 장착한 겁니다. 안바르고 장착해도 하루 이틀운행해도 없어지긴 합니다만, 그동안 밀리는 브레이크를 경험합니다

@lousep1964 2 года назад

I need to replace the same part but on a 2013 Hyundai Genesis Sedan 3.8 V6 The part number on mine is 51750-3MXXX when I search for it it comes back with whole assembly/hub I don't want. I just want this part your replaced for my car, are they the same for all Hyundai/Kia vehicles or are they different, do you know where I can find, your video is very helpful thanks for posting.

@_yamech7533 2 года назад

The 2013 Genesis only has Rear Wheel Drive. It will be totally different with FWD. Try to search 59910-3M000 for rear left 59930-3M000 for rear right

@lousep1964 2 года назад

@@_yamech7533 I'm looking for both front sensors without the hubs not the back yet but thank you.

@lousep1964 2 года назад

@@_yamech7533 My Genesis has the same looking part in your video but in the front only on left and right. Not the back. I can't find them.

@_yamech7533 2 года назад

Update. I confirmed that Genesis front speed sensor is different with Santa Fe. And does not have separate part number. You may need to get a hub in assembly.

@lousep1964 2 года назад

@@_yamech7533 Yes I was afraid of that thank you for confirming I appreciate that very much!

@lorenzojrolivas6494 10 месяцев назад

How much torque does your ratchet wrench have?

@_yamech7533 10 месяцев назад

PITTSBURGH 1/2 in. Drive 10-150 ft. lb. $21.99 from Harbor freight. It covers most of the job.

@mysymysy9104 Год назад

hello. where did you buy your computer to scan?

@_yamech7533 Год назад

It is Bluedriver OBD2 scanner. You may not need same model. Cheaper scanner works find for beginners.

@jamesdalesmith69 2 года назад

What is the actual part# ? i am having a hard time finding it

@_yamech7533 2 года назад

You can see part number in my video 01:00. Goggle 52751-2B100QQK.

@danieldelrosario8006 2 года назад

How did you know which sensor has the error?

@_yamech7533 2 года назад

You need to scan OBD2 error code. 00:00:47 I got code number C1208. It means “Rear Left Wheel Speed Sensor Invalid Or No Signal”. Each sensors has different error codes.

@bobbybrown6646 Год назад

They had a RECALL 949 RR WHK SPEED SENSOR INSPECTION/REPLACEMENT in 2021. Have brought my 2014 Sante 4x to the dealership and still same lights on for 5 years AND did the recall! They never fix the issue. Codes showing C1206 rear lh open/short, C1209 rh lh open short and C1210 rh range performance intermittent. Supposed to have this looked at again next week, Hyundai corporate making empty promises though. Please help. After seeing this wondering if I can get a $20 to $100 part and bring it to a local mechanic. These greedy dealers are going to want to change me that just for a diagnosis. Again FIVE times bringing it in even during the warranty and it was never fixed . Any advice? Thank you so much.

@_yamech7533 Год назад

If it happens intermittently and it happened again after the replacement, I would suspect a faulty connector or wiring. if you have experienced mechanic, they can read raw data from sensor with the advanced OBD2 tool and analyze them. wish you good luck.

@bobbybrown6646 Год назад

@@_yamech7533 Bad sensor. Both got replaced. Light has been off for a month now. Thank you