i accidentally 3D-Printed a Drone Powered E-Bike...

Подписаться 103 тыс.

Просмотров 132 тыс.

50% 1

A drone motor powered E-Bike for $100? NO its even more then that!
Check out PCBWay!: bit.ly/3NUeMHi
Files:
Printables: www.printables.com/model/8298...
Thingiverse: www.thingiverse.com/thing:656...
Huge thanks for the Cameos:
@integza - Wrong about tomatoes, but right about most other things!
The Infini-Z:
• it can 3D-Print onto i...
Print metal at home:
• i made a METAL 3D-Prin...
There is a Discord server :
/ discord
Music in this video:
Home -We're Finally Landing - / home-before-the-night-...
Steventhedreamer - • Only The Lonely song
Check out my social media for sneak peaks and memes:
/ turbo_sunshine
/ sunshine_turbo
/ sunshine13337
www.printables.com/social/280...
www.thingiverse.com/Turbo_Sun...
cults3d.com/en/users/SunShine

Опубликовано:

30 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@BeHeaven616 2 месяца назад

The other day i accidently printed a fully functional AND ARMED f16 fighter jet. Sometimes crazy things happen by accident

@squa_81 2 месяца назад

You wouldn't download an *f16* says Lockheed Martin commercial

@grande1900 2 месяца назад

I like how this comment doesn't have any context anymore because of the new title (it used to be "I accidentally 3D-Printed an E-Bike!")

@BeHeaven616 2 месяца назад

@@grande1900well he probably changed it by accident

@yaliofek4384 2 месяца назад

Now I understand why the atomic bomb was created

@TurboSunShine 2 месяца назад

Haha, first sentence of the vid makes it still relevant :D@grande1900

@TomStantonEngineering 2 месяца назад

Coolest dyno ever!!

@Zerff 2 месяца назад

"no longer reasonable to measure in giraffes"

@Pyroteknikid 2 месяца назад

As an American, I am proud to see him avoiding the metric system at all costs. 😉

@dillpickle7633 2 месяца назад

Why does this sound like part of a physics exam lol

@oweeboy8220 2 месяца назад

The detail in this video is crazy. At 7:44 you can see him giving away a copy of his data sheet, and if you skip back to 5:15 you can see him grabbing a copy from the future. I hope I wasn't the only person to notice this, as it is absolutely amazing.

@TurboSunShine 2 месяца назад

Haha, my gf thought nobody would notice 🤣

@yash1152 2 месяца назад

i thought he gave away it as tissue to some pooper in the forest

@AckzaTV 2 месяца назад

Ya this kid has a lot of health and energy. In a few years he'll get tired

@BitcoinTalkShow 2 месяца назад

@@TurboSunShine Noticed! And at this point I'm wondering in what timeline the gf is. What about the rest of the audience? Been watching your channel for some time now (first saw you on Thingiverse way back when) and even left a note to my future self to check back on your channel. You're in the future indeed! Keep on riding that time traveling e-bike of yours! Okay, enough with the time traveling puns... 😅

@achrafn.a.972 19 дней назад

@@TurboSunShine try to integrate acoustic levitation into 3d printer to print in the air

@tetros2064 2 месяца назад

"bookshelves dont rotate" yeah no way

@charliebrady3751 2 месяца назад

Ah, but they do sometimes. But only for a little over a 1/4 of a rotation...

@Francois_Dupont 2 месяца назад

depends how many screws you are using.

@marekfiferna 8 дней назад

@@charliebrady3751 And for some reason it's always when your head is right below the bookshelf. Guess how I know.

@kingkurtis 2 месяца назад

I wonder how italians feel with you driving your bike with fusilli

@daliasprints9798 2 месяца назад

I was going to do a friction coupled ebike but integrating the gear like this is even better. It's not entirely hot removable, but only the dirt cheap printed gear has to remain on the bike. Everything else can be detached and carried for charging & theft avoidance.

@Ernzt8 2 месяца назад

A rotating bookshelf... that sounds like an amazing project :)

@sea7551 2 месяца назад

This makes me want to make a bookshelf that’s 4 or 6 shelves that rotate on a big disc on the wall while of course staying upright. sorta like wall-e‘s parts shelf but parallel to the wall

@Ernzt8 2 месяца назад

@@sea7551 That is an interesting way to realize this!

@Upsetty-spaghetti 2 месяца назад

no it doesnt

@Simon-dp2df 2 месяца назад

Every bookshelf can rotate. Just stand on it and it will I promise Unless it's built by me. I may or may not have a bit of an over engineering problem

@martenthornberg275 2 месяца назад

That's a really nice way of integrating the gear into the wheel

@Smonjirez 2 месяца назад

This morning I went for a walk in the woods, tripped over a log of wood and accidentally 3D-printed a 1-to-1 scale ancient Roman mausoleum

@martythestines 2 месяца назад

9:52 Notice Me Wes!

@-OBJ 2 месяца назад

Giraffes are always a reasonable unit of measurement - if it gets smaller just start comparing it to smaller parts of a giraffe, like just the size of its tongue

@jutrbr 2 месяца назад

We should measure more things in Giraffes. Great video! 3D-printers getting one step closer to world domination

@Sylfa 2 месяца назад

This sort of reasoning is why some people still cling to imperial measurements you know. 😂

@MrHeHim 2 месяца назад

First thought, have the drive gears closer to the motor so they can be around the shaft itself (maybe also add keyway). Second thought, print the drive gear out of natural nylon and maybe also use silicon grease. Third thought, I should print it out and join the fun 😅

@berathan5569 2 месяца назад

Yeah same 😢 I hate when I accidentally print a whole bike sometimes

@mrnoname6327 2 месяца назад

Cool idea but you would lose the ability to coast along or vary your speed. If you brake to hard, pedal, or go down a hill (possibly up too) your worm gear would lock it up and break.

@srboromir452 2 месяца назад

I only support two people on patreon. I'm so glad you're one of them with how good these recent videos have been.

@iemozzomei 2 месяца назад

I wasn't expecting it to be quite so.. functional lol. Nice work!

@yeaglaceshorts546 2 месяца назад

I’m so exited to see if the printer is possible. This would be revolutionary. Good luck!

@bowieinc 2 месяца назад

For those outside the US, I had AI do the conversion. An average banana is around 7-8 inches tall. An average adult giraffe is 14-18 feet tall. To convert feet to inches, we multiply by 12. So, a 14-foot giraffe would be 14 x 12 = 168 inches tall. Therefore, a 14-foot giraffe would be roughly 168 inches / 7 inches/banana = 24 bananas tall! For an 18-foot giraffe, it would be even taller at around 28-32 bananas tall (depending on the exact height and banana size).

@critsal490 2 месяца назад

thank you this really helped. lol :D

@BURNINGBAGOFCRAP 2 месяца назад

Thats the most helical gear ive ever seen!!! Great print as always =D

@PaulDominguez 2 месяца назад

Great video! That's thinking outside the (gear) box 😂

@Vez3D 2 месяца назад

Nicely done man. Clever idea on the gear.

@TurboSunShine 2 месяца назад

Thanks :)

@cuisineefficace7903 2 месяца назад

My favorite Chanel on youtube

@IronLungProductionsOfficial 2 месяца назад

I will never get over how creative some people are! kudos!

@ryanmontgomery1622 2 месяца назад

Ya sunshine! Best 3d printing channel out there 🙌

@SHRUGGiExyz 2 месяца назад

Hmm yes you might say the helical gear of the motor is very... _rotini_

@properprinting 2 месяца назад

Very elegant way of making the gear ratio, well done!

2 месяца назад

Very well Sunshine. It is great to see you in action again.

@DrLesterTheSmith 2 месяца назад

This is so incredibly creative and sophisticated! Thank you for taking us through your process.

@swarm1016 2 месяца назад

this is so awesome!! almost 100K subs too, Congrats !!!

@fnytnqsladcgqlefzcqxlzlcgj9220 2 месяца назад

Woah incredible design, if this was modified to be consumer ready you would have everyone converting their bikes to ebikes

@xReDxTuRtLeZx 2 месяца назад

wow what an awesome concept, and interesting to see how many directions the rabbit holes we go down for projects can lead us.

@LincolnWorld 2 месяца назад

So cool! I've been subbed for a few videos, and this video makes me want to subscribe again. LOL I think you are really onto something here. I'm not an engineer, but have been designing and 3D printing stuff for a long time, and things like this rim design really open up my mind to different approaches. Thank you!

@I.no.ah.guy57 Месяц назад

Wait... So you're saying you unsubscribe from channels after watching what you want to watch?

@tetros2064 2 месяца назад

you do not fail to impress. Very genius designs, i shall remember all of them.

@kosnk 2 месяца назад

This is amazing, Sunshine! Thanks for sharing!

@treeplate512 10 дней назад

8:04 bookshelves are the future of vehicle technology

@giuseppebonatici7169 2 месяца назад

the small gear seems like JLC metal print candidate. it is too small to be trusted to not quickly fatigue (it is making like 10k contacts per minute after all) and break. it is also small enough to not cost a fortune.

@forestbrother7772 2 месяца назад

I luv the classical background music! Toccata and Fugue

@canepaper967 2 месяца назад

very elegant solution to use the rim as a large gear, other youtubers trying to use drone motors on an e-bike failed

@Joseu124 2 месяца назад

@SunShine Engineer here: increasing the helical angle also makes the teeth slide much moer ovewr eachother. the most efficient gears are straight spur gears (more than 99%). the higher the helical angle the less efficient you become until it resambles two screws (efficiency lerss than 30%). whith the high angle and also high module (determines the size of the teeth) you used you probably were much less efficient than a 2 step belt reduction, though obviously funnier looking ;)

@61umbrellas 2 месяца назад

Incredible video! As always!

@macrumpton 2 месяца назад

Brilliant idea to drive the bike wheel from the rim. I suppose you could double the power easily just by adding a second motor.

@nonsequitor 2 месяца назад

Outstanding work! How big can PCBWay go because a printed aluminum rim with the drive keys in it would be 👌 bang twin motors on opposing sides of the rim to reduce wear / keep the rim centred under load - as well as boosting power... 😁

@danukerudesu8919 2 месяца назад

I made sure Wes noticed.

@Audio_Simon 2 месяца назад

Could you drive the tyre / tire directly with the outside of the pancake motor? Maybe add a tpu ring around it to give grip. Maybe choose a motor with more ideal diameter?

@Lolwutfordawin 2 месяца назад

Reverse bottle dynamos. Of boy.

@zman1508 2 месяца назад

I look forward to trying to make my own. It will make my commute to the train station much nicer!

@gammagerm3008 2 месяца назад

Why are there no E-Bikds or EV's for that matter, powered by bookshelves? Well.. Bookshelves do not rotate. Made my day!

@poohhappy4548 2 месяца назад

This is very creative you finally give me a practical solution to convert my bilke

@kape5105 2 месяца назад

This is ridiculous. And I love it!

@epicdaniel508 2 месяца назад

Great video! I definitely gave up the ghost! 🤣

@MarkBoda 2 месяца назад

Fantastic work good sir!

@lostvisitor 2 месяца назад

This type of stuff will change the world.

@jongranada 2 месяца назад

5:20 I thought I was about to be told to "Imagine a bus stop"

@desiraedibble3657 2 месяца назад

Hey there! This video on 3D printing is awesome! It got me thinking about a wild idea: what if we could print objects layer by layer, but from the inside out? Imagine a 3D printer on steroids, with a spinning mold and robotic arms depositing materials. We could create super intricate mechanisms or even build entire structures floor by floor with spray concrete. This "layered construction" approach could be a game-changer for fabrication! #layeredprinting #futureofconstruction

@X41N3 2 месяца назад

That is so awesome, I kinda wanna try it out. Maybe I can use the 3d printers at school to reduce cost.

@DentedPrinter 2 месяца назад

Excellent, now I *have* to put it on my kids stroller. You know, for hills.

@TheQsam1 2 месяца назад

You should make a 3dprinter watercutter thing

@TheMissingSockz 2 месяца назад

Inside facing gear teeth on the wheel is a good idea. Until you get some mud/snow/road grit in the gear at least lol. If you could support the pinion on the other side with another bearing I think you'd get much cleaner data from it, looks like a lot of energy is being wasted deflecting the pinion which is also why it wants to break.

@ericmurphy6299 2 месяца назад

Can you make one that maxes out at 25kmph/30kmph/35kmph? Happy to pedal start it and then have the engine boost it(have the engine charge&measure your rpm and then spin at a slightly faster rpm). Loving your project!

@ThankYouESM 2 месяца назад

I've wondered for many years if it is possible to make the rims the magnetic/brushless motor, sort of like a maglev.

@XavierBetoN 2 месяца назад

I wrote this idea to Tom Stanton's comments back ago. Glad that someone tried this. Although, as an electrical engineer, however i appreciate your design, I gotta say it's poor choice of motor/controller/battery. And pivot gear (small one on the motor) should be aluminum

@Witsenburg 2 месяца назад

Interesting. I let the motor bell turn the wheel by friction, just clamp it down from the bike frame onto the wheel. No gears that can break.

@spinnetti 2 месяца назад

I accidently printed a 1/12th scale RC WWII tank destroyer (Hetzer)... was loads of fun. Maybe I can shoot at e-bikes with it.

@freedomofmotion 6 дней назад

Could you run two of those motors either side of the wheel for twice as much torque? I assume one motor would run backwards for this to work.

@m1raclemaxsax 2 месяца назад

Wait was that the space engineers music in the beginning?

@qoxyll 2 месяца назад

I am curious why you did not constrain the other side of the pinion with a shaft and bearing

@crackedemerald4930 2 месяца назад

those power curves though... me and a friend joke about graphs going back and forth, i never expect it to happen for real

@TurboSunShine 2 месяца назад

those are un-smoothed, the back and forth is probably due to vibration in the entire system

@sreevindyan-77 2 месяца назад

need links sunshine pls and can we use for every cycle ? and need the circuit diagram too i hope you will give it soon for all of us.

@mhb41 2 месяца назад

Damn than an impressive list of subscribers for someone with less than 100k 😮

@gameworkerty 2 месяца назад

Started playing the song "Home" with no mention of speedruns? I guesd you were going kinda fast.

@Kxx20 2 месяца назад

Every time SunShine is posting a video you can sure someone is in a big panic

@ChatNoirLe Месяц назад

Although boring, you can just test how much current the motor can withstand without overheating, then with the kv value you have your torque. 1/kv = torque 1/(rad/s/V) = (Nm/A) Doesn't quite apply at high rotor speeds where other things start to become a problem.

@AlexThomas230 2 месяца назад

I accidentally bought the universe

@vibaj16 2 месяца назад

Love your use of kliksphilip music

@ApocalypseofMichael 2 месяца назад

It could also be a Dynamo that could charge the battery when you're pedaling !

@CamdenBowen 2 месяца назад

Sick

@HexOverride 2 месяца назад

Steventhedreamer is so cool

@HonestAuntyElle Месяц назад

This is cool, but looks like pedalling would snap the plastic parts pretty fast.

@IFRYRCE 2 месяца назад

Man, AvE is subscribed to you? You've made it bud.

@Audio_Simon 2 месяца назад

It's like a knighthood for engineering content creators.

@NeoIsrafil 2 месяца назад

Ya know, you figure out a good design for a stepper or even just a regular brushless RC motor id LOVE to print some out ^_^. I'll subscribe so hopefully when you release the final version I can make some too for my random projects I like to do. 😊. The wife will be super happy if I'm finally not spending all our money on parts 😂

@ghostagent3552 3 дня назад

Can someone tell me what happened to the graphs? Like what's with all the loops

@NovaPlayz2 Месяц назад

we need to get this man at least 7 figures

@michaelbujaki2462 2 месяца назад

So, if you have a larger motor, you can use a larger pinion that won't break so easy.

@platin2148 2 месяца назад

And did you get the same thing also metal printed at least the worm gear?

@pinecone606 2 месяца назад

worm gears can be back driven; the idea that they can't is a common misconception. If you are unable to back drive a worm gear, you are actually just feeling the friction in the system, as worm gears are rather inefficient

@braindedpanda 2 месяца назад

so this ebike conversion, 1)are you able to still pedal without breaking the bike system? 2) can pedaling generate power to recharge the batteries?

@colinmetzger6755 2 месяца назад

There's nothing in this that would prevent you from pedaling with the motor going. As for getting regenerative braking, that's going to depend solely on the speed controller, which the one he used isn't likely to support it.

@maka6000 2 месяца назад

How does one accidentally do something like that???

@impracticalKim 2 месяца назад

watch the video ;)

@markissboi3583 2 месяца назад

i bought a spare 12vlt wire feeder for a small mig welder basically what they put inside 12vlt car winches maybe if muck about with some gears it'll push my MBike 10klph cruising speed along the river battery & charger unit will cost me the most . i,d put a victa motor mower engine on but them 160cc r noisey

@oldmanbluntz 2 месяца назад

Ahhhh the brake Dynamometer. I use a bicycle brake disk for my RC car dyno.

@ryancomisky4999 2 месяца назад

You sir are a genius

@matipousi8180 2 месяца назад

What type of filament are you using?

@MacDaddy5 2 месяца назад

anyone interested in this project needs to read The Bobiverse by Dennis E Taylor. keep up the progress my guy. it doesn't matter what I'm doing, if I see a new video, I'm watching