I Bought 5 Highly Rated Heavy Duty Monitor Arms on Amazon

Подписаться 75 тыс.

Просмотров 401 тыс.

50% 1

Up to 57% OFF Steelcase Chairs and More Ends 8/25! www.btod.com/r...
Office Chair Comfort Tier List CHEAT SHEET www.btod.com/c...
If you're like me with a large 42" OLED, or maybe an 49" Ultra Wide screen, you've noticed a lack of options. I decided to buy all of the highest rated options to see if there were major differences between each.
Watch Next:
The Last Video You'll Need Before Buying a Monitor Arm
• The Last Video You'll ...
The Ultimate Monitor Arm Tier List
• The Ultimate Monitor A...
Productive Desk Setup Tour 2023 | Dark & Moody
• Productive Desk Setup ...
5 Tips That WILL FIX Your Cable Management
• 5 Tips That WILL FIX Y...
$50 Cable Management Fix
• $50 Cable Management Fix
Monitor Arms in Video:
0:18 Monoprice Heavy Duty - amzn.to/3XXc3Qe (Amazon)
2:14 Vivo Premium - amzn.to/3kJ5sKz (Amazon)
3:35 AVLT Single Mount - amzn.to/3kIr3CU (Amazon)
5:25 Ergotron HX Single - amzn.to/3kHtGVJ (Amazon)
7:01 Humanscale M10 - amzn.to/3H45nZt (Amazon)
Desk Setup Links
-Furniture
Desk: bit.ly/3GcxVOu
Desk Top: thd.co/3Ge7jga
Chair: bit.ly/302lAbT
Wire Management Box: bit.ly/3oofikH
Humanscale Monitor Arm: bit.ly/3rDp3xk
Wire Management Clips: amzn.to/3prGRZz
Side Table: amzn.to/3xW3JnV
Lounge Chair: amzn.to/3EBGwtu
Ottoman: amzn.to/3IkHqwX
Rabbit Art: amzn.to/32NVDlF
-Tech
Speakers: amzn.to/3IhcNbI
Samsung 49” Monitor: amzn.to/3dlDnCi
MacBook Pro: amzn.to/3lAagzy
Keychron K4 Keyboard: amzn.to/31z1mLL
Logitech G703 Mouse: amzn.to/3xSyVEF
BenQ Light Bar: amzn.to/3olOIZs
CalDigit Dock: amzn.to/3rA2NEw
Galaga Micro: amzn.to/3Dr8mHw
-Accessories
Govee RGB Strip Lights: amzn.to/3xSFYNA
Govee Wall Lights: amzn.to/3DovbM4
Plants: amzn.to/3GbmLJO
Acoustic Panels: amzn.to/3ImY7YI
Affiliate Disclosure: As an Amazon, Haworth and Steelcase Associate, BTODtv may earn from qualifying purchases.
Full Disclaimer: We are an office furniture dealer and sell some of the products we review. To learn more about the products we sell, our review process and why you can trust us, please visit: bit.ly/2LsiXIy

Хобби

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 205

@btodtv 25 дней назад

Watch Next: The Last Video You'll Need Before Buying a Monitor Arm - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oDAL_nmbZ6M.html

@Illthallion Год назад

THANK YOU! Finally someone has provided us all who own a Samsung Odyssey 49" series monitor with products to compare/consider.

@Iam2lazy2register Год назад

Thanks for the test. I think it's worth mentioning that the Ergotron HX comes in two different versions: The HD pivot (which you apparently got) for large curved screens and the normal pivot for flat screens. Because of the large range of force needed to keep the different monitors horizontal, it seems they needed to design two versions to completely cover it

@Adam4 6 месяцев назад

Correct, and if they would've looked at Ergotron's marketing, they'd see the minimum weight for the HD Pivot is advertised as 28lb. The Dell S3222DGM they're using in the video only weighs 22.4lb. Kind of unfair to give it a bad rap because you didn't read the specs before buying.

@shawnb50 5 месяцев назад

Thanks for this information… I was looking on amazon and was unsure what the difference is. I was looking for one that will support a c3 lg 42 inch. Which is just 21.6 lbs. Good to know the one that is cheaper is the one I need. It makes sense that the added weight curved monitors have out in front of the mount cause the center of gravity to put more tension on the spring. I guess you could always strap weights to the monitor that are hidden if you really need to though. I like the idea that i will be able to hang heavier things on this in the future.

@adamant3316 Год назад

"If you want to spend $140 you're probably just going to want to spend $379" lol

@TheRealMasterChiefOfficial Год назад

He said if you want to buy the 249 arm stand just spend 379 for a much better model

@DenisSong Год назад

AVLT's previous model (the AVLT-DM42-1, the one in the video is the AVLT-DM64-1) is good enough for most 49" super ultrawides and is $100 cheaper. I'm using the AVLT-DM42-1 for my Samsung CRG9 and I've had no issues with it so far. The CRG9 is 25.6 lbs and the monitor arm is rated for 33 lbs. The main reason why I went with the AVLT over the Monoprice and Vivo is that it comes in white to match my desk setup. Edit: Forgot to mention that the AVLT-DM42-1 also comes with the quick connect feature like the Monoprice and Vivo.

@Sareth94 Год назад

Something to say about the Monoprice HD - the fact that only has two pivots, means the screen can't stay centered if you pull it up or down, or towards you. That's a pretty big no-go for 'congested' desks, multimonitor setups or things like graphic tablets, which need to move forward. I went for a Ergotron LX for my 24" / 9kg graphics tablet, so it can double as a secondory monitor or be pulled or the way forward, angled way back, with the bottom of the screen standing on the desk to be useful for drawing. It's lovely!

@phuongtrang280 Год назад

Hmm, I was consider buying the monoprice. Can you explain more about the pivot not being able to be centered?

@Sareth94 Год назад

@@phuongtrang280 the screen is on a single arm/link - so you can pivot it, but not pull it forward in a straight line. The foot of the arm will be not centrally behind the screen either, if it's all the way back. it has to pivot in a half-circle, basically. If you have two 'arms', like the ergotron, you can pull forward straight, and have much more flexibility.

@phuongtrang280 Год назад

@@Sareth94 Thank you so much bud. Guess I am going with the ergotron then

@SDW_Tech Год назад

if your spending nearly $600 on a monitor arm ur nutz

@AmiTam85 7 месяцев назад

well, if you had money for Samsung Odyssey G9 then it’s no problem 😉

@Atomic_dipper 27 дней назад

I mean some of us would rather buy once and cry once. Idk about other companies but ergotron has a 10 year warranty. 400$ to hold whatever monitor I get in the next 10 years

@mensstudio834 9 дней назад

I bought PG32UCDM and i am pretty sure i am not buying M10!

@Wassoi 2 дня назад

Dude. IT'S AN ARM. It's not necessary to spend THAT much on one. Not every purchase is worth it. @@AmiTam85

@kool-breez Год назад

Chapters/sections for each product would be cool :)

@simonvh7092 Год назад

The clear upper cable management brackets are behind the monitor anyway, I think it makes it easier to identify cables when rerouting. In my opinion it is a very nice feature

@railerswim Год назад

6:55 that's because the HX is pretty much for monitors at the max weight. The hinge is compensating for how heavy the monitor is. Put a monitor on there that doesnt hit the max weight and it will keep tilting up

@gagarin777 27 дней назад

I had 2 Ergotron HX's. I would say that there is definitely some variance between the units. One on lowest spring setting would keep the neck joint in horizontal position on it's own (no monitor attached). The other would keep tilting up around 30 degrees at the lowest setting whenever I managed to push it to horizontal position by hand and a lot of force. However both on lowest settings on this neck joint keep LG C2 42' (which is about 10kg, the lowest range for HX) in a position I desire, without tilting the screen up. My guess is size does matter as physically bigger screen just applies more leverage. I also had tried HD pivot replacement header and that couldn't be adjusted to keep position with this TV, it would always tilt up. HD pivot header has stronger spring (hd has 16 coils vs 18 on normal, but the spring wire is much thicker). It's only for heavily curved monitors with edges that expand a lot from flat plane, causing a lot of leverage on the neck joint.

@evgeniy19 6 месяцев назад

4:26 actually there was a quick connect system. Screw half way top two screws into monitor and hang it on the arm. Then secure bottom screws and tighten top ones. Usually it works both for 75 and 100 mm VESA mounts, but in this case for 100 mm only.

@barkindustry8150 Год назад

You guys are damn life savers! I don't know why your channel isn't over 1M subs. Video quality is exceptional and in depth. I built my custom 80x30 black walnut desk based on your review of the Fully Jarvis frame and it's the best thing to ever happen to my WFH office.

@metsfaninct Год назад

Just ordered my second ergotron. It’s been working well on a 55” OLED and hopefully it’s not too heavy duty for the 42” OLED I’m going to put on it. It’s so stable compared to others and the look makes my desk look amazing.

@btodtv Год назад

You should be good on the 42" OLED. 55" is massive for your desk, dang! I really like my 42" :) -GK

@Javious Год назад

@@btodtv I got the ergotron with my 42" LG C2, it works perfectly, but make sure you have 2 people for the job and adjustment!

@gagarin777 27 дней назад

@@Javious Hi I'm fellow Ergotron HX owner with 42 C2 OLED on it. How hard is to extend the arm horizontally from folded position on yours? On mine it takes a lot of force to do that, definitely both hands needed and lower arm moves harder then the upper arm. Without any monitor attached it swings by a push of one finger. - As for the installation it depends how big you are. You can manage alone if you are tall, but it's definitely safer to attach TV with a buddy.

@NanoNutrino Год назад

The black WALI Monitor arm is similar to the VIVO arm, it's probably made in the same factory, but WALI have a grey and white version which allows you to tighten the clamp from the top rather then having to screw it tight from beneath the desk. The clamp works the same as the clamp for secretlab's monitor arm, it's definitely the all desk clamps should be made.

@RedBeardedRabbit Год назад

Thanks so much for this content. Glad to see there's a solid $100 option - wish we knew how it held up long term compared to the more premium options, and what other little or big features/annoyances might emerge over time.

@GLITCHHUNTER01 Год назад

I have for about 2 years now and it’s works just as great 👍🏻

@Mushbee Год назад

It does feel like there is a strong bias towards the M10 model, it seemed to me that it was a paid advertisement. The "negative points made for the first 2 products (cable management) are also present in the M10, despite the design differences, there doesn't seem to have a reason to spend more for the same.

@CaptianBigums Год назад

I have the Vivo for my 45in LG Ultragear and I wouldn't change it for anything. It has been nothing but great and I love it sm.

@undone14 3 месяца назад

How has the Vivo been working out after all this time?

@CaptianBigums 3 месяца назад

@@undone14 I would buy it again if I had to. Easy to move and so many ways you can move it. Expensive at first but man o man so easy to work with and a lot of things you can tweak to make it perfect for you.

@Svanir.80 Год назад

I've been using an Alienware QD-OLED monitor for about a month now with its stock stand, which is designed quite well, but realizing I would rather clean up some desk space. This video couldn't have come at a better time!

@chesterchong8704 Год назад

haha so which one did u get?

@spoils8179 Год назад

@@chesterchong8704 either the 3423dw or the DWF by the sounds of the qd-oled

@chesterchong8704 Год назад

@@spoils8179 ? I’m asking which monitor arm did u get for your aw3423dw?

@MimosaSTG Год назад

I've been using the Ergotron on the PG48UQ and love it. I grabbed it in black and it looks great . I checked out the M10 and liked it as well... but It came down to aesthetics for me. I didn't want a gloss back base. I will also say that the Ergotron is a beefier, more utilitarian design and I love the look of it. And yes, that quick connect mount is very overengineered. I would say it's indestructible under normal means.

@CheekiTiki Год назад

I honestly can't imagine why anyone would pick the M10 besides having "f u money" though. Quite a huge price jump for marginal improvements over the competition imho.

@TheProductCritiques 9 месяцев назад

Hey there! Thanks for sharing your experience with these monitor arms. It's really helpful to get a hands-on perspective. I've been considering upgrading my monitor setup, and your review has given me some valuable insights. The Model Price arm seems quite robust, but the bulkiness might be a concern for me. I appreciate your honest assessment of the Vivo Premium arm, especially considering its budget-friendly price. It's good to know that it can handle larger monitors effectively. The AVLT arm's unique feature with USB and AUX ports is intriguing, but the setup complexity might be a drawback. The Ergotron HX's premium quality and quick-connect system certainly catch my eye, but I'm a bit disappointed with the cable management. The Human Scale M10 sounds impressive in terms of build quality and cable management, but the price is quite steep. Your video has been informative, and I'll definitely consider these options when I make my decision. Thanks again for sharing your findings!

@blackxtrading Год назад

Did wanna comment before but I swear, this is exactly what I have been looking for, the best arm that can carry the G9.

@lololololololol444 Год назад

Finally been looking for a video like this forever!

@btodtv Год назад

Glad I could help! -GK

@mcandelacom Год назад

Excellent video. Are you planning to do an updated video about dual monitor arms?

@MrFirsttodie 9 месяцев назад

good review, I was all prepped to buy the HX but saw this and now going to go for the Vivo. The look is not really important as long as it does the job. Thanks for saving me 500 bucks (I need 2)!

@se7enity648 Год назад

I bought the Ergotron HX monitor arm to hold my 48” LG C1 OLED TV. Works perfectly. Monitor arm is VESA 100 x 100 and the TV is 200 x 300, so I had to buy a adapter plate from Amazon.

@btodtv Год назад

I had to buy an adapter plate for my 42" OLED as well. I can't imagine 48" that must be massive! -GK

@se7enity648 Год назад

@@btodtv: I was tired of waiting for the 42” so I bought the 48” when it was only £999. I thought 48” was too big until I watched “The Expanse” on it, it is the perfect size as long as you sit 10’ foot away from the screen. People complain that the C1 is not bright enough, I have turned the brightness down as the contrast from black to white hurts your eye. TV is excellent, but the remote is terrible.

@gagarin777 27 дней назад

@@btodtv Hi I'm fellow Ergotron HX owner with 42 C2 OLED on it. How hard is to extend the arm horizontally from folded position on your sampl? On mine it takes a lot of force to do that, definitely both hands needed and lower arm moves harder then the upper arm. Without any monitor attached it swings by a push of one finger.

@jacquelynnacopoulos1278 10 месяцев назад

Hello, Thank You For The Tests. I would choose the Ergotron HX.

@ettiennevanloggerenberg8164 Год назад

I bet you haven't' had the M10 very long. The plastic humanscale uses breaks after a few years. They normally stiffen up and then eventually break when removing cables. I have installed hundreds of monitor arms over the years and as much as I prefer a plastic covers or cables the Velcro straps in the HX is actually a great idea as I already use Velcro with all of the monitors I install.

@btodtv Год назад

We’ve been using it for about 18 months without an issue. It gets added and removed from desks quite often. Thanks for sharing your experience-GK

@andymok7945 Год назад

I pretty much have settled on Ergotron monitor arms for myself. I have bought less expensive a couple of times and was completely disappointed. The monitors were only 60% of the rated monitor load weight rating, but failed. Even after tightening everything, the monitor would sag down and/or the monitor would tilt down. Maybe for a small very light weight monitor would by another brand. The other thing to consider is how they hold up a few month down the road as well. Surprised that the Ergotron that you tested had such poor cable management. I also have the Ergotron holding my LG 42" 4K monitor and has been rock solid for over 4 years now. I paid $320.00 CDN for it back then, hard to swallow, but worth it. The mast is 18" high with a 2 section arm, so lots of force being put on it. Very smooth to move around and position the monitor for various viewing depending on my needs.

@gagarin777 27 дней назад

Hi I'm fellow Ergotron HX owner with 42 C2 OLED on it. How hard is to extend the arm horizontally from folded position on yours? On mine it takes a lot of force to do that, definitely both hands needed and lower arm moves harder then the upper arm. Without any monitor attached it swings by a push of one finger.

@joshwatterson Год назад

No single monitor arm should cost $500+ lmao

@CheekiTiki Год назад

100% Agreed. You'd have to be crazy, sponsored, or just not gaf about money to dump that much on an arm.

@brendonwhartonfit 5 месяцев назад

Should have voice commands or something at that price 😂

@tommytexter4054 Месяц назад

Damn right!

@YYorle Год назад

@1:00 I would imagine that the monitor itself came with standoffs just for this in the box. I have two MSI 27" QD monitors and had to use the standoffs as well because otherwise I couldn't slide the monitor on the quick hanging hinge.

@jtjt376 Год назад

I have AVLT that supports 43" for $137. To me, you get a lot for what you pay for and yet it is well built. I think for most people a $500 monitor mount from Humanscale is simply too hard to swallow.

@URAZKIVANER Год назад

So none of them support full 90 degree tilt to front with a lowest arm height possible preferably lower than the mounting point , which is the only reason I need these arms for my NEO G9 Odyssey . Because I need to get my monitor out of the way for my projector screen with one little move. I was able to do this with my 34" monitor and the arm I was using which was able to support only up to 8 kg unfortunately :( I guess my only option for this kind of weight is just remove the cables and put the whole damn thing to the floor temporarily ;)

@Michaeljamieson10 Год назад

extremely thorough review

@keifer39 Год назад

I returned the vivo, it tilted horribly with a 43" LG

@rupertthurner8311 Год назад

thanks for the test! the wall mounted ergotron tilts down only 5° which prevents it from beeing mounted higher on the wall, which is a little unfortunate.

@brandonmyers3419 8 месяцев назад

I had the vivo mount. It lasted 3 months before my Samsung G9 weight was to much for it. I walked into to the room to find my monitor drooping. I got lucky, after that I looked at some comments about it and people were talking about how the hinge point failed on theirs also but they walked into the room to a broken monitor on the ground

@Blafard666 Год назад

Thank you for this, very useful !

@Cereal_Killr Год назад

I have the one in white in start of video. Exact same but mine is north bayou...I notice most are chinese models just rebranded with many different names. It holds my 40" innocn 21x9 and now it has my LG C2...zero issues. Both VERY heavy too.

@egj1975 Год назад

Great video... now I know what to buy. Thanks for this

@btodtv Год назад

You're welcome. Which one is it? -GK

@egj1975 Год назад

@@btodtv The Ergotron is what I want. The reason for one of these is that I have 1 monitor (Asus Rog 32") I want to use for both Simracing and for Office work. And with this its easy to move from 1 position to another. And great work on the video... it shows everything very well and a quality production. Have a great weekend mate.

@victorariasvanegas7407 4 месяца назад

Waooo that's exactly what I was searching, thank you!

@rickyembers7634 Год назад

0:53 just take one of the screws to your local hardware and buy stand-offs, it’s that simple and cost about five dollar’s

@nickrafuse984 Год назад

So glad to see this video come out, I tried to find an arm for my 49 when I first got it (2 years ago!) but.... no joy This makes me want the Humanscale, but on a monoprice budget. I guess I'll have to decide what to compromise on. If this was going on a standing desk (movement and shaking) would that change your pick?

@none3209 Год назад

You missed a good arm. I used to use a Humanscale M8 but I switched to a Flo Plus from Colebrook Bosson Saunders / Herman Miller. I find it much smoother to adjust than the Humanscale. Use it on my 34-43" monitors.

@vp2777 Год назад

I'm looking for a 48" TV Vesa 300x300 fitment and 15kg monitor arm that can rotate 360 degrees here in the UK, you have shown helpful information. Thanks for your video.

@SterlingSanders Месяц назад

I've had 3 Ergotrons for at least 7 years for various OLED monitors I've had over they years ranging from 48"-55" tripple setup. They have been fantastic, and at the time, they were basically the only option available. Happy there are more options these days, but I can personally vouch for the durability and capability of Ergotron HX. They make my faviorte heavy duty monitor arm. Ergotron offers arms for every size and monitor wedight. If you had problems with the arm, your monitor was not heavy enough and you should have chosen a different model arm. I've had montiors up to 55LBS on the Ergo, and it's be fantastic.

@gagarin777 27 дней назад

@SterlingSanders 27 дней назад

@@gagarin777 horizontally? It can be a be a bit stiff, but not forceful or hard at all. Might want to check if your joints are properly greased? I’m never had this problem. I have 50lbs 48” OLEDs, and they swing across my desk easily. Sometimes it takes a bit to bend the arm from straight, but never a problem to pull straight from a bend.

@gagarin777 27 дней назад

@@SterlingSanders Thanks for the reply. I already cleaned and regreased all joints twice, heck I even removed the 2 grub screws that keep arms assembled and it still the same. It almost moves entire desk from place when I try to unfold it :( Looks like time for RMA

@SterlingSanders 26 дней назад

@@gagarin777 yeah, that’s weird, also try tightening the base attached to the desk. If that’s tilted, there may be impingement or weight in balance at the joints. When you regrease make sure you use mechanical grease. Either way, disappointing to hear, I have 3 of these, never regressed and never had this problem. I can post a private video so you can see how mine work tomorrow. Cheers.

@HexaFox 3 месяца назад

I noticed that most of these manufacturers do not offer alternative VESA plates. So you are literally stuck with whatever plate it comes with. This severely limits the Ergotron in my opinion because it only accepts 75x75 and 100x100.

@snowfree52 Год назад

that would have been interesting to compare them at the end and give your advice/opinion, I ordered yesterday a clone of the vivo premium btw

@HandicappedMind Год назад

i have 2 usb ports built into my arms, i run the arms ports right up to to the monitors usb ports and run a usb to the comp from the monitor basically taking one of the ports that are a pain to get at on the monitor and turning them into usable ports on the arm

@artemas7076 7 месяцев назад

Does the VIVO one allow you to freely adjust the tilt or do you have to adjust and lock-Thanks, great review

@mickaelsflow6774 Год назад

Any worries on the mounts and the table for such Heavy Duty, High Weight monitors?

@nave9909 Год назад

At $54 for the Monoprice Heavy Duty on Amazon at the time of this comment posting. It's a no brainer!

@Draxion_ Год назад

Hmm thought I'd see the Amazon basics one on here

@CheekiTiki Год назад

They don't have one rated for this weight/size

@darthscion Год назад

Oh no. PLEASE NEVER use an electric screw gun to attach a mount to the back of your monitor! If you mistakenly use the wrong screw that is to long, you could go to deep and permanently damage your monitor! Use a hand screw driver to do it so you know when to STOP screwing it into the back of the monitor. I know there are plates behind the mounting holes, but I bet you those are not thick and you could probably at least dent.

@mastercarclub Месяц назад

Hi, I'm looking forward to installing this 49" on top of my two 32-curved Dell monitors. I need at least 20.5 inches under the 49" curved to be on top of my two monitors. Do you know if this arm can go tall enough? Thank you.

@InfinityFishing 5 месяцев назад

What about Silverstone arm 14?

@chikensaregood9500 10 месяцев назад

amazing review, i will definitely save for the humanscale since the whole point of monitor arms in my opinion is to not see it and this one looks the most sleek

@joeshmoe7485 Год назад

Enjoyed the video. Looking to upgrade my workspace in a number of ways, I'l like to get a good monitor arm setup that can work with two monitors. Do you have any videos featuring dual (or even triple) monitor setups?

@mewimi Год назад

I've been using ergotron LXs for yars, I have 4 of them for a total of 8 arms ( two per stand )... I may have lost track of how many arms I actually have though. Costly, but great and many adjustment settings!

@pehenry Год назад

6:50 - I had the same problem with my Ergotron HX and HP Omen 27 inch monitor. I should have gone with the LX. I ended up double sided taping two, 2.5 lbs Olympic plates add extra solved my problem.

@CheekiTiki Год назад

Should've just returned it bro. The LX is like half the price.

@pehenry Год назад

@@CheekiTiki totally agree. Too late. But maybe in future I'll have a bigger and heavier monitor.

@CheekiTiki Год назад

@@pehenry That's a good point. As an LX owner, upgrading to an ultrawide will be pretty damn expensive for me compared to you.

@TechyGondal Год назад

Dell's MSA20 arm is the best i found.

@zardoz2627 Год назад

I'd really like to see a video like this for wall mount arms. I won't use a desk mount and want to upgrade my monitors to 32" or bigger monitors so probably need better wall mounts

@freedonx Год назад

Just came about Herman Miller also makes arms.. how do they rate? as good as their chairs? (expensive but good?) Some of them cost $300

@SlowlyFallingUpwards 8 месяцев назад

Not sold on the $570 monitor arm. For that price that arm monitor should move by a remote or phone app with preset memory placements, fast charge my phone, built in alexa/google home/ or something, RGB lasers and a built in toaster

@tiger7634 7 месяцев назад

so i just got the odyssey 57 inch, i have not got a monitor arm yet, but i definitely must get one soon. I have searched online everywhere for a solution, but everyone recommends using ergotron and using screws to stick in the joint at the base because it drops down from weight, im not buying an expensive arm that doesn't even work, anyone know if there are newer arms made for this thing?

@666PANDEMONIUM Год назад

You guys should check out the Vivo V155C monitor arm. It works great with my 48" Oled and is less than $100.

@simonlewis3438 Год назад

Hi, would be great to see a review of monitor arms that don't have a clamp at the back - my desk has a massive bar and cable tray and much as I'd love to, none of these systems work for me.

@investidorcalejado8344 Год назад

Can I stack 2 49 inches monitors using monoprice?

@florianp.6256 Год назад

Thats a much Vetter one i think

@stormk-1130 9 месяцев назад

i need one for my lg 49 inch wide monitor, to use it in the wall

@wjrasmussen666 Год назад

Are you using a window manager? if so, which one?

@mototacularlife5267 Год назад

I used the least expensive mount for my 49 inch and did it all by myself. Also idk why you struggled to get the quick connect to work as there was plenty of space or so it appears. Where in the world is someone who’s spending $179 just ready and willing to spend almost $400, how to you come to this conclusion?

@Markalot284 10 месяцев назад

I tried the vivo premium for my alienware oled 34 inch and it could not support my screen at all. Granted I got it from warehouse deals at amazon and it had clearly been previously used but it was infuriating to install all of it only for the arm to not be able to support the small 13 lb screen. Was I unlucky?

@btodtv 10 месяцев назад

Did you adjust it? There is a set screw to adapt to different weight monitors. I can promise 13 lbs is not an issue with that arm, unless it wasn't adjusted or it was defective -Greg

@Markalot284 10 месяцев назад

@@btodtvYes I tried adjusting it but I guess like you're saying it was defective. Probably why it was returned the first time around...

@rzmonk76 Год назад

If a monitor arm is not Ergotron I'm not even going to consider it.

@headlibrarian1996 10 месяцев назад

I wonder if the M10 can handle a really heavy monitor like the 57" Samsung Odyssey Neo G9 ultrawide. Another RU-vidr was using, I think, an Ergotron and the monitor tended to droop down (top is closer to you than the bottom) rather than be square to the desk.

@darrenschoensee8005 9 месяцев назад

It probably could, testing the M10 now and it seems my 32 inch 4k curved monitor is the BARE minimum weight requirement

@solomonmars5735 Год назад

Suprised to see the DELL MSA20 wasn't on the list considering u had a DELL monitor.

@andrewdoan1920 Год назад

What is the Clearance Level with the Monoprice when the G9 is installed?

@bluemoth1879 Год назад

Brilliant 🥂🥂🤙🤙😃😃 simple and straight up.

@connorl5868 Год назад

Which one can be mounted on the wall ?

@AX-fx7ng Год назад

Any folks use these with 42, 48, 55 OLED or Normal TVs?

@Soulkeeper-tv8re Год назад

Question how high do monitor arm go ...I have 2 49inch looking to stack .. top to bottom... just wondering will a arm work that way??

@cincydreamhomes Год назад

Do you have the link to the sound panels on the wall? Thanks in advance

@bb_8_us Год назад

Which one had the least amount of wobble on 49 inch?

@moepOo Год назад

Unrelated question but do you have any infos on the release of the Steelcase Karman? Looking forward for the review!

@Made2FartTurds Год назад

Is this specifically for larger monitors or could I use this for my 27 inch?

@nycplayboy78 11 месяцев назад

I have a glass desk and I am looking to setup dual 38" Alienware monitors what freestanding monitor stands would you recommend please?

@fernander7826 Год назад

which monitor stands would be able to go high enough if I were to get 2 of them to mount one 49" on top of another?

@Musashination Год назад

Some comment on the life expectancy of the spring in the arm. I have an arm that the spring has surrendered and the arm no longer maintains the height it used to.

@andyzhu5559 Год назад

Nice video! Technically the first 3 models come from the same monitor arm supplier in Asian region. So their clamps and other details are similar.

@90DaysOfDevOps Год назад

If you were going to stack a 49” with a 34” on top with a 27” to one side of the 49” what arms would you for to make it not look like Armageddon?

@williss1192 Год назад

Spending over $300 for a mount is a huge joke to me. Its not worth it. It seems that Ultrawide clamps just aren't there yet. I want to try getting Premium VIvo but I see a lot of bad reviews. I strongly suggest you do deep research, you can probably find one around your price range...

@Whiskey.alpha_ Год назад

Hey love the video can you help me I’m trying to find a way to mount a monitor hanging from a shelf above my desk is this even possible

@tzytb-ks6cq 7 месяцев назад

Quick question guys, the AVLT says up to 43inch tho, how are you using it for 49inch. I just got a 49inch lg ultrawide, couldyou please recommend if I should get the avlt in the video or the one that’s heavy duty.

@ericnewton5720 Год назад

I’m guessing these can’t be used on 1/4” glass top desks?

@karlhendrikse Год назад

Hmmm so it appears adjustment is something people do with these arms? I'm looking to buy some but I will set them up once and never move them again. It's good to know I might not need something very expensive

@jronmantech Год назад

I wonder what the name brand multi monitor heavy duty arms are like. I saw an option from imovr that was motorized which looked cool, but it wasn't heavy duty rated. Only supported around 20 pounds per arm which seemed to be about average for non heavy duty arms.

@michaelhigson9686 Год назад

you get an invision mx450 in the UK for less than all these and performs just aswell if not better

@paulyeomans1065 Год назад

But Invision say that the max450 will only work up to 35 inches, that the weight distribution in wider monitors means that the mx450 will not properly support them. I know, I asked and they replied: “While the MX450 would be suitable for both the weight and VESA size of your screen, unfortunately, your screen is much larger than the capacity for this monitor arm which is 35" and therefore would not be suitable. In addition to this, we've discovered that some of these much larger, wider or curved screens are much deeper in overall screen thickness and are also bottom heavy in design. This combination and the centre of gravity is much further forward than normal, which in turn, exerts much more leveraged weight or force onto the tilt function. ”

@simonvh7092 Год назад

Chapters would be very nice