I Bought a NEW Wiseco Crank For My Honda 400ex...How Long Will It Last?

Подписаться 461 тыс.

Просмотров 33 тыс.

50% 1

Since the original oem crank in my 2000 Honda 400ex went out, I decided to buy a brand new Wiseco crank. I have been hearing mixed reviews on these cranks...Some people say they are okay and other say they are horrible. We are going to find out how long this crank will last and if it is a good investment. #Honda, #Rebuild, #Wiseco,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►WEBSITE: laptwo.com/
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Опубликовано:

21 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 182

@sixpacksandsrts9122 3 года назад

My man needs a workbench My back hurts just watching you

@cjleh757src6 3 года назад

Facts

@theoneandonly2421 3 года назад

I’ve never had a problem with wise I, in fact that’s the only company I use. The grind marks are from balancing, you will see the same thing on rods as well, on any type of combustion engine. You have came a long way brother with your skills, remember it doesn’t matter who you are, you never quit learning!

@LuvTruckGarage 3 года назад

The grind marks on the crank are done during balancing the crank- a good thing

@2vintage 3 года назад

Thank you! I was wondering what they were!

@Deathtrap617 3 года назад

I’ve probably balanced 1000 cranks, I’ve never found one do balance it.

@Deathtrap617 3 года назад

Wiseco cranks in my experience dont last long, I’ve always either rebuilt my own or used a hot rod crank. Wiseco uses inferior components

@250race 3 года назад

I told you to get the case wetter in the crank puller like 3 years ago along with the compression gauge in the radiator pressure gauge.

@Jake-rp9cv 3 года назад

@@Deathtrap617 i have a hot rods crank and crank bearings in both my bike and my quad. both have gone in less then 10 hours.

@Builditathome-Restoration 3 года назад

Love these split case rebuilds keep going iam doing one build too! Got cases lose

@doylewilliams9429 3 года назад

Wheelie tip : instead of pumping the gas try to keep it at a steady rpm

@navyseabee7245 3 года назад

I just restored a 96 Honda CR125 and that's what I purchased for it a Weiss go crank and Rod already assembled seems to be working great no issues you should be all right!!!! Rev it up!!!!! Lol

@bikefixbuilds2139 3 года назад

Good job my friend this is some great content

@7empest.420 3 года назад

i remember when you were at 500 subs i am so happy to have see you've grow

@TeamWaxOffroad 3 года назад

Love these videos man, I learn a lot from them.

@jasonsteyn449 3 года назад

Really love your videos man! Keep it up, from South Africa

@2vintage 3 года назад

Thank you!

@RetroGameRepairs 3 года назад

Wiseco cranks and Top ends are just fine I've used them for all of my builds and never had an issue. The people having issues probably installed them incorrectly.

@jasonpetrich4141 3 года назад

Proper install and break in is key!!!!! Some people are very impatient, so they rush

@cameroncrush9591 3 года назад

Not true they had a problem a few years back with QC problems with their tolerances and balancing and cheap bearings. I’ve seen failed ones and one that vibrated hard

@TK-gi5sv 3 года назад

At one point a few years ago they were Chinese built crankshafts and going out often at less than 5 hours with lots of customers complaints. They had to step up and make things better or else their reputation was gone. Hot rods are made in the USA though 🇺🇸

@jasonpetrich4141 3 года назад

@@TK-gi5sv wiseco has a lifetime warranty so It doesn't really matter! Hot rods has sold regrinds/refurbished parts as new so.....pick your poison. Every bike can be made fast & great with a number of combinations of parts, this happens with the machining industry.Its all trial and error till you figure out what works best for your build

@bubaa1218 3 года назад

Tyler Raumer No wisco cranks were pretty shitty back in the day

@m8fusion712 3 года назад

Awesome tear down video man

@Eriu-88-88- 3 года назад

Wheelie tip: When you go pass the balance point and off the throttle, try quick change to next gear the torque of the next gear will help lift the front end a lot better then trying to save it by reving to the moon .. its a lot smoother and easier to balance the back wheel when rpm is low-mid range.. Practice 2nd gear to 3rd gear changes when you hit the balance point. and make sure your keeping your big toe on that rear brake. lol Once you've mastered the gear changes and become smoother then you can practice rear brake touch.know that the rear brake brings down the front in the air and on the ground.

@LilMo450 3 года назад

Great video man this is some really good content 👌🏼

@2vintage 3 года назад

Thank you! I'm glad you enjoyed it!

@codakirkpatrick9980 3 года назад

Awesome video. I always like your videos

@evan_bmx7273 3 года назад

Your defiantly more of a quad guy I love the wheelies bro keep up the good work. Practice makes perfect 👌

@brycehelton8141 3 года назад

Love your videos man!

@simonjimenez2365 3 года назад

I also ordered a Wiesco bottom end kit for my 03 Crf450r, it’s running good, time to see how long it lasts.

@alekdillon2185 3 года назад

My brother has got a 400 ex and I found doing 2nd gears wheelie helped me learn faster.

@2vintage 3 года назад

Who thinks the Wiseco crank is going to last long? There are a lot of different opinions on them. Please LIKE and SUBSCRIBE if you enjoyed the video! It really helps me out a lot! Thank you for all the support!

@2vintage 3 года назад

@Carson Kay we will see!

@2vintage 3 года назад

@Daniel Ortiz22985 blasters are pretty cheap! Usually can find one for $600

@ericross1901 3 года назад

2vintage I have a question

@zacklataille342 3 года назад

I had a 06 kx250f had weisco crank bike probably had a good 80hrs or more I had redone with oem parts and the crank was in good shape to be honest lol

@4stroke_king 3 года назад

Zack Lataille had put a brand new wiseco crank kit in my yz450f took it to a ride it jumped timing bent 3 valves broke two valves destroyed head and cracked piston jug was still good and crank was still brand new looking bike had about 10 hours on it before that lol

@joe212 3 года назад

The shaved spot on the crank is a balancing mark where weight was removed. The rodend on the stock crank looks blue

@chadriddle3517 3 года назад

I believe it will last a very long time ! Wiseco makes good products ! Good video !

@jasonpetrich4141 3 года назад

She's fine!!! Now you need to run some quality oil, amsoil/ belray is the only oil I run it makes a difference and it needs to be changed atleast every 10hrs of riding!! And stay on top of maintaining it. Side note !! Tusk stuff is very tough!! I support there clutches big time,.. iv had one with 15% springs in my 01 trx 300ex,and I beat the guts out of the bike, im not nice to it and it just eats it up, never slipped, and its ben in my bike for 5 years, doing great still 👍

@davidbrilmyer2354 3 года назад

I've had pretty good luck with Wiseco!!hopefully u do to!!

@2vintage 3 года назад

Awesome to hear! I hope so too!

@guso3325 3 года назад

i love your videos and just keep it up

@zac_ma8454 3 года назад

thanks for the content

@gtisid 3 года назад

great your building up your toolbox as i’m hoping big bore 2Ts will follow. i usually freeze crank and heat inner race of crank bearing, can be a pain sometimes

@TypicalPeen 3 года назад

wiseco cranks are mint ive never had an issue i put one in my blaster when i rebuilt it and it runs like a top

@natesomers5387 3 года назад

You should polish the cases while they are split!!! And start popping the clutch to get the bike up just a thought

@RadMachines 3 года назад

Dang bro you are making lots of progress enjoy your videos!! Keep it up you even inspired me to start my own channel lol! Keep it up love your vids!

@2vintage 3 года назад

Awesome!

@RadMachines 3 года назад

@@2vintage I have been a fan for like 3 years love seeing you grow can't wait for a new video!

@2vintage 3 года назад

@@RadMachines thank you!

@coyote_450f 3 года назад

dot 3 and 4 have almost no differences dont be afraid to inter change them. its not gonna hurt it, or be unsafe.

@claytonstephenson4939 3 года назад

tip on the wheelies go completely stopped 2nd gear and put your left foot on the rear grab bar and right foot on the rear brake best way to learn you kind of get to stand up for the balance point, also the safest way to bail as well

@ItsTheBroski24 3 года назад

Don’t chop the throttle when wheeling. I know it’s hard not to but if you stay on it smooth and let it come up, you’ll hit balance point and you can start to get a feel for what it feels like and how to use the rear brake. Chopping makes the bike, or in your case quad, feel unstable.

@aussiedirtbikers4774 3 года назад

man your soo good at what u do your gonna make a lot of money one day

@tylerwhittaker4853 3 года назад

You should consider getting some heel guards and some new nets for 99 400ex

@michaelsimon5877 3 года назад

That high up there was a good balance point

@everythingloud4068 3 года назад

Wiseco top ends are very good. I've known 3 different people that tried the bottom end and 2 had the bottom end go out quicker than usual. All balls makes a good bottom end or wrench rabbit. Good luck 👍

@bryantucker6725 3 года назад

I always check the bearings to see if they fit the crank shaft I have got some before that didn’t fit did u try heating it back up

@2vintage 3 года назад

Yeah i tried the bearing is stuck now. Going to be waiting for the correct tool.

@Mr.Lonely-682 3 года назад

I wanted to know if I can use the TRX400 ex 05 engine with reverse on a TRX 400 ex 01 frame?

@the_2_stroke_wizard903 3 года назад

Maybe should've tried to do the same with the crank as the bearings, heat the bearings, freeze the crank

@2vintage 3 года назад

Yeah i tried to do that with the crank. For some reason it didn't work as well.

@n2vxc 3 года назад

Wow he is good just looking at a Crank and knowing it looks good..and side to side play is normal. It's called thrust clearance..stop basing wear on side to side. Up and down is the bad

@2vintage 3 года назад

Yeah i know. It's hard to show up and down play in the camera. I was also trying to pick up the crunching noise the bearings were making.

@jaimeheredia6738 3 года назад

Can’t wait to see a new video on the tecate

@jr_inc2249 3 года назад

I use wiseco cranks in my cr. I’ve never been disappointed👍

@Eriu-88-88- 3 года назад

would love to see more 2 stroke builds :)

@papi_jxy1697 3 года назад

Keep doing what ur doing

@danwhite8502 3 года назад

Thanks buddy. Anytime you need anything just ask!

@wouldyouglowme4235 3 года назад

I used a press to replace my brute force 650 crack and it was super easy

@ericross1901 3 года назад

Hey I have a question I love ur videos

@benjamindavidson632 3 года назад

Would be interesting to know what crank you pulled out. Did you look for any markings?

@megamindtvsydney3967 3 года назад

Hi bud Any sand dunes or beach riding places around you ? How awesome would it be to go on a real adventure camping on the quads you and your brother.

@kbikelife4576 3 года назад

wheelie tip: you should try putting your left knee on the seat and the other leg on the back breaks

@katelynstoesz1655 3 года назад

A little tip for you. To remove a flywheel key use a wire cutter.

@nolanscott6203 3 года назад

He uses all these fancy tools while I’m over here using a long screwdriver, a hammer, and my hands😂😂

@dirtrider6090 3 года назад

The right way to test bearings is by squeezing them and turning. They’re mostly all gonna spin freely if you don’t have a preload on it

@backyardbangers1012 3 года назад

Nothing wrong with hot rods or wiseco these days. Both quality rods. My ktm 380 2 stroke is ridden hard for years now on hot rods

@citabria4804 3 года назад

Wiseco should last a long time I plan on doing a top end rebuild on my 400 with Wiseco

@kahootjesus5385 3 года назад

When I first saw the beginning of the title I thought you bought another 400

@2vintage 3 года назад

Nah I bought something better today though!

@EJ-74 3 года назад

Getting pretty good with the wheelies bro 👍 ✌️

@quadsavers8639 3 года назад

U call hitting the red line in 1 a good wheelie😳

@EJ-74 3 года назад

@@quadsavers8639 The guy is learning jackass

@quadsavers8639 3 года назад

@@EJ-74 hell it only took me not Even a week to wheelie

@EJ-74 3 года назад

@@quadsavers8639 How long did it take to become a jackass Not even a week I bet 😁

@quadsavers8639 3 года назад

@@EJ-74 00000000.0001sec when i was born

@tomatoknuckles 3 года назад

Wiseco have updated their cranks. They are not like they used to be id be happy to run one now. Don't worry about it. 👍

@2vintage 3 года назад

Good to know!

@wouldyouglowme4235 3 года назад

How do you get parts so quick lol

@carterlynch6169 3 года назад

You should get some aftermarket shocks for your 400

@parkerbrinker390 3 года назад

Some orileys break cleaner cleans those cases out great

@that_crf450r6 3 года назад

I love your videos so much. Keep up the good work

@2vintage 3 года назад

Thank you!

@Hunter-kz6os 3 года назад

Wiseco anything is great. I have one of there pistons in my Yamaha warrior 350

@11GalleryATV 3 года назад

The crank and the counter balancer need to be "timed up" and they go in together ... there is 1 line on the crank gear and 2 lines on the counter balancer gear ... the crank gear tooth goes in between the 2 lined teeth on the counter balancer gear. Put the crank in the freezer over night (or use dry ice which is even colder than the freezer) then heat the crank bearing and drop in together (the counter balancer is not press fit so it should drop right in)

@2vintage 3 года назад

Yep I looked that up! Thank you!

@stean14gaming 3 года назад

Love it

@quadsavers8639 3 года назад

Sad to hear that clean 400 hit that revy

@bumpstartnether 3 года назад

Please get a bench or table or something. Kudos to you for doing that crawling all over the ground 😂 maybe even an engine rebuild stand? 🤷🏼‍♂️ even 2”x8” boards nailed in a square works.

@Oscar-sg7bw 3 года назад

I sold my dirtbike and bought onother one with a problem water getting in oil and i cant wait to ride its been 1 month

@Oscar-sg7bw 3 года назад

@2Stroke Tyson tks

@andreasjonsson8075 3 года назад

How long did it last?

@dylangears8321 3 года назад

weird question why so many looking cracks inside the cases never seen that before?

@funniersphere44 3 года назад

Would I have to use a impact gun to take the flywheel off? I can't get it with a breaker

@2vintage 3 года назад

It helps!

@2vintage 3 года назад

You shouldn't have to.use an impact though

@funniersphere44 3 года назад

@@2vintage it's the only seized ish nut on my bike but the bike has been sitting since I wanna say 2012 of longer I accidentally snapped the stator plate where the sensor attached and I have to get to the magneto or stator

@troyaldridge3853 3 года назад

Let's see this wheely in every gear

@davij2727 3 года назад

Shaved spot is how the casting is balanced.

@Maysin777 3 года назад

Shaved off end is when they balanced the crank.

@Eriu-88-88- 3 года назад

You need to get yourself a vapour blaster dude :p

@Logoskates24 3 года назад

I honestly heard Wiseco cranks are not made very well have seen a ton let go in banshees and few others . Hope everything goes well btw get a raptor 700

@meanbird9843 3 года назад

I Would like to see a ltz400 on the Chanel?

@250race 3 года назад

That was a Chinese crank and bearing that was in the bike when you got the bike

@skullrippersweat4850 3 года назад

Nice

@bricestcyr3440 3 года назад

Do a trx250r vs your 400ex

@native_boy6930 3 года назад

When will you take out the dirt bikes

@magee16749 3 года назад

Need to get a repair manual. You did something out of order bud. I wanna see 5th gear wheelie.

@nemanjadraca4012 3 года назад

I would went with the hot rods crank but that shit should last it’s almost like oem I’m pretty sure

@jeremycaldwell2878 3 года назад

Change the gear while your doing a wheelie and you will go further

@jtbassgambler2594 2 года назад

If you take good care of it and it'll last long

@Damn_Carter 3 года назад

Turn your idle up a little on the 400 you won’t have to rev it so much when you start it up!

@luke.dantini191 3 года назад

wheres the 450 at

@Fortnite-ke9px 3 года назад

I put a wiseco crankshaft on my CR125 and I had it for 2 years already it’s still Good all I do is switch the rings on piston still runs yall dumb keep it up

@sandmanbub 3 года назад

Whoop!

@hunterkamp64 3 года назад

I've only ever used wiseco cranks and haven't had any issues so idk what ya'll are talking about

@cadesperry3467 3 года назад

Liked before I watched😂

@dillonharkleroad3303 3 года назад

Where’s the trx450?

@2vintage 3 года назад

Sold that about 2 weeks ago. No wi have three 400exs

@dillonharkleroad3303 3 года назад

2vintage I think it would be cool to get a yfz450 to compare it to the trx

@bradymoeller203 3 года назад

Nice schwinn bicycle grips on that “mint” 400 you ride “wheelies” on

@embattledboy8978 3 года назад

Stfu

@larrywarner9314 3 года назад

Dude you seriously need a work bench your making my back hurt just watching you

@mushmanist 3 года назад

Larry Warner 😂😂😂

@riccardo3212 3 года назад

Wiseco on my cr 125: 38h

@riccardo3212 3 года назад

2Stroke Tyson probably, but i think also the assembly of an engine is important, and this is why now I do all the manteinance at home, and not from my ex trusted mechanic, which I suppose he assembly engines with his feet🤦🏻‍♂️. Edit: sorry for my bad english, I’m working on it