I Bought An 800 HORSEPOWER NASCAR Racing Engine for my 1955 Chevy!

Подписаться 297 тыс.

Просмотров 452 тыс.

50% 1

I SPLURGED on a wild Legit Ex-Competition Nascar V8 for my Street/Strip '55 Chevy Project! This is a RACING BEAST from top to bottom! It could have been on the front row at Daytona 2004! These super high compression V8s live over 8000 RPM and should make even more power than it did in a Nascar (750HP or so!) and Tony Angelo and the Stay Tuned crew are going to put it to the test!
Thanks to Wilson Race Engines for the Dyno time!
Wilson Racing Engines: wilsonraceengines.net/
---------------------------------------------------------------
CHAPTERS:
0:00 - Intro
2:40 - What is an SB2?
7:28 - Wilson Racing Engines Dyno
24:40 - Making CRAZY Power!
25:52 - Carb Tuning
29:00 - More Pulls!
---------------------------------------------------------------
GRAB THE NEW STAY TUNED SHIRTS AND GEAR: tangeloracing.myshopify.com/
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Mike Kunz: / mikeslim
Tunes by The Subtastics: subtastics.bandcamp.com/
----------------------------------------------------------------
MY PARTNERS:
Holley: holley.com/
Summit Racing: www.summitracing.com/
Wirecare: www.wirecare.com/
QA1: www.qa1.net/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!

Авто/Мото

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,8 тыс.

@user-pd7dt6vr5u 2 месяца назад

So I sit here watching this and I'm crying because my dad died on November 3rd 2023. He was an old school drag racer. He had a 66 442. Was a street racer as well as a quarter mile racer. We are from Whitman M.A. he raced at New England dragway. His name was Richard "Dicky"Coughlin . My dad my best friend. He loved your channel. I introduced him to it like a year before he passed and he loved it! Just wish he was sitting next to me watching this! Thank u for your hard work in making a great channel.

@davidhamilton7628 2 месяца назад

Sorry for your loss man

@StayTunedTA 2 месяца назад

I'm really sorry for your loss bud. Your Pop sounds like a heck of a guy.

@HJP19693 2 месяца назад

My dad died August 14th 2023 unexpectedly after he got a clean bill of health great CAT scan he died four days later and he was big time into racing himself that man meant the world to me and then some he leaves behind three boys his wife and brother-in-law and I'm trying to take care of everybody here and it is so difficult I just want to go be with him I would give my soul for him to be back for 5 minutes I don't care I'm so sorry for your loss

@Brock_Landers 2 месяца назад

I can't begin to tell you how sorry I am for your loss. I didn't have any real racers or fast car lovers in my family growing up, so my uncle got me started working on cars, but it was experience that taught me how to work on cars. I taught myself how to build engines, and I built a 4g63t Mitsubishi turbo engine that made 534 whp, and then I even built a Honda 1.8L four cylinder that went on to make 709 wheel horsepower. I have always been about import cars because of Fast and Furious came out when I was 18 and at the time I had a 302W swapped 1994 Eddie Bauer Explorer that I installed an Explorer Express supercharger kit on and it was also jacked up with a Skyjacker 6" lift with 33x12.50 Super Swampers on it (but it was still only 2WD). Right now I have a 2013 BMW 135i as a daily driver, and I have some bolt on mods and a tune, but it's a daily with a warranty, so I can't get too crazy with it. Still, I'd LOVE to build a high horsepower domestic someday before I die.

@HJP19693 2 месяца назад

@@Brock_Landers that is absolutely amazing man yeah I used to be into it big time and I'm 46 now and I used to have a couple of Kick-Ass cars I had a 80 Malibu wagon with a 400 small block that made 700 horse back in the early nineties it was a fun ride and I had a 94 Mercury cougar 4.6 with a turbo on it ran fantastic I got my dad's Silverado now it's an 06 it's lowered to the ground getting tired but I'm going to fix it all up as everything starts falling apart but that's part of life I guess that's amazing man God bless you and your family

@josephyentz870 2 месяца назад

These guys are legit. Dude running numbers in his head is impressive.

@StayTunedTA 2 месяца назад

Yea they were killer to work with!

@williambehles7704 2 месяца назад

@@StayTunedTA Comes from Lots and Lots of experience.

@SenorSenorStacks 2 месяца назад

Honestly, I didn’t know that was something a person could do… I bet dude and his dyno is the stuff of nightmares for hype beast engine builders

@gordocarbo 2 месяца назад

@@StayTunedTA Awesome, my dream engine! Love to see this in your 55 running . What trans are you going to run

@timothybrown5364 Месяц назад

&nojuI hi] @@williambehles7704

@royb.1441 7 дней назад

You could already tell that first 811 pull was gonna be good when the dyno op brought the load up and gave a quick head nod of approval....cause he saw the torque number it was holding after loading it up and knew right at that moment it was gonna be special. Bad ass....and a very smart dude to catch that before the run even started.

@philipcalderone8092 2 месяца назад

Man the ol school footage of ol boy Jenkins rippin gears with a stogie .... wow real man right there

@heftycat Месяц назад

I got the same vibe as if I were watching an old school boxing bout where all the cameras were on the sides of the ring....just like something epic about that!

@adeadlyfart13 Месяц назад

Back when men were men! This younger generation just has no idea. Now I sound like a boomer, oh well.

@user-mp9rd4hg8b 21 день назад

That's how I shifted my 1980s, high school-built "street racer." (69 nova, 350 with a 3 speed) Good memories.

@anthonyholleran9378 17 дней назад

Amen! Simply Awesome, Old School Cool, Baby! The Absolute Best! Old School Cool will Never Die!

@yankeedoodle7693 2 месяца назад

25:04 when the dyno guy nods, you know its good

@StayTunedTA 2 месяца назад

Yea he was very happy with the results!

@whatta7793 Месяц назад

@@StayTunedTA I wasn't even there and so was I. Dyno guy is a true class act who knows this stuff. Awesome vid

@jadevictorsen3874 6 дней назад

He sounded optimistic when reading the sheets he had in his hand

@jakethetamalejohnson1673 2 месяца назад

I’ve never been so excited about a build on RU-vid before…..the 55’ is gonna be awesome!

@StayTunedTA 2 месяца назад

Let's GOOOO, thanks for watching!

@gregblack8550 2 месяца назад

Can’t imagine shifting a 55 at 8 grand. I’m sitting here pretending.

@gregblack8550 2 месяца назад

Finney not going to like your small block running with that hemi.

@PistonsofFury 2 месяца назад

@@StayTunedTAplease tell us you're backing this with a Jericho!

@hydrocarbon8272 2 месяца назад

I'll bet Finnigan feels the same way, knowing this engine will be 50x more reliable.

@cringram1003 Месяц назад

$12,500 is a awesome deal Tony you scored. Would be perfect in a sprint jet boat. Enjoy

@kencleg7721 Месяц назад

Agree boat drag engine

@royb.1441 7 дней назад

Yes I am glad he told the price because that is awesome to see a deal like that

@edwardrucker5412 2 месяца назад

When you guys build the headers, you should build them like they did in Nascar. Tuned, equal length, with the 4-2-1 stepped collectors with true boom tubes. It would sound amazing!

@corystansbury 2 месяца назад

With the consistent quality of this channel and the people, the ability to buy stuff like this will become easier and easier. No way this doesn't keep growing like crazy. Like Cleeter, Derek etc., it's like hanging out with good friends.

@StayTunedTA 2 месяца назад

We really appreciate the support!

@GregLanz 2 месяца назад

Apparently I need a better class of friends

@NotJo4Ever13 Месяц назад

@@StayTunedTA I absolutely second this, I was introduced to your channel quite late, but even still I see nothing but progress you guys are kicking it

@ryanmalin 2 месяца назад

8:45 Bill Grumpy Jenkens. Fucking legend

@StayTunedTA 2 месяца назад

Absolute PA Legend!

@path1478 2 месяца назад

@@StayTunedTA The Grump would have loved that engine.

@danmyers9372 2 месяца назад

He was the first Pro Stock car/driver I ever saw in person. It was around 1971-72 at a match race in central CA.

@halfcentury1112 10 часов назад

I love how you guys can diagnose by sound!! so amazing

@jtownisallyouneed 2 месяца назад

Tony displaying the regular Italian two day growth between workshop and dyno

@mikeyeyes7 Месяц назад

🤣🤣🤣🤣

@andyleblanc1564 2 месяца назад

I am so jealous of that motor!! That 55 should be called “Moonshine”

@StayTunedTA 2 месяца назад

I like it!

@mangomcpoo475 2 месяца назад

@@StayTunedTA Ya and it revs to the moon!

@sambozeman5266 2 месяца назад

Paint it black call it "shiner" cause it's gunna give out some black eyes on the quarter

@Charles-kg5fl Месяц назад

@@sambozeman5266 I was thinking the same with a dark purple to black transition paint. Definitely "Shiner"

@jeadams2428 2 месяца назад

"The internet is a weird place man!" Truer words have never been spoken! 😂

@BillyJoeJimBob28 2 месяца назад

Yep, just wanted to say good score on the engine Tony. Without it, there is no fukin way ur gettin 820 horses in that guys engine shop! 🤔 🤣🤣🤣 (weird right?) 😂

@fks-pv8il 2 месяца назад

I was laughing when he said that! 😂😂

@OsamaBinModdin 2 месяца назад

Morgan McClure X Pipe and Boom Tubes are a must.

@oggp5951 2 месяца назад

Chris Wilson knows his stuff. So cool to see him on your channel. He dynoed my 402 LS on his pump and it made 649hp.

@waynetessier3058 2 месяца назад

Hello curious what you are using for fuel?

@oggp5951 2 месяца назад

@@waynetessier3058 VP C16

@thomshere 2 месяца назад

***You seem to be such a cool guy and car builder and thank you for letting us know how much this motor was. Not many people do that so I really appreciate it and I'm sure a lot of other people do as well. Btw, I really liked the vice grip garage build, that car is awesome, you guys did a great job! Man I wish I could find one like that. Thank you so much for all your awesome videos.***

@StayTunedTA 2 месяца назад

Thanks so much for watching, we appreciate it!

@rodneyclark1990 2 месяца назад

One video with Derek and a man can go shopping 😅 😂 lol

@BIllMcCambridge 2 месяца назад

Tony had the full emotion rollercoaster. I think I even saw him throw up in his mouth a little hahaha I know he drove all the way home with his jaws hurting from smiling!! Great job Tony gonna be killer. Please please please put a boom tube on the shoe box!!

@StayTunedTA 2 месяца назад

Hahaha for sure!

@sarahdell4042 2 месяца назад

We’ve all been there with a fresh build. It’s always pins and needles. Even worse when you buy a used high dollar motor from a stranger

@ronjones-6977 2 месяца назад

@@StayTunedTA What a deal. I wonder what it would cost to build a 340 comparable to that. A high-spinning small block is like music to your soul.

@timschrock23 Месяц назад

Did I see you loading the 55 at Bristol at Freedom 500?

@LocalCelebrity412 2 месяца назад

Now this is what I’m talking about!! Super high compression, 400 inch , 8000RPM small block with a Dominator. You’re going to need a Jerico trans behind that or a faceplated tremec if you want to shift at the moon!! Always have great content. I love this!!

@StayTunedTA Месяц назад

Oh for sure we are going to run a proper crash box!

@55cleon Месяц назад

Faceplated Tremec 👌🏿!

@optimusprimer4392 Месяц назад

I'm guessing you can say goodbye to the restrictor plate

@guest6423 2 месяца назад

Around '96, I took a bellhousing to a guy in Sun Valley, CA to have some tabs welded to it. It was in a packed, nondescript industrial yard, littered with rusty machine tools. Inside, I found him asleep, tilted back in an office chair at the welding table. Stacked 6" high, all around were cylinder heads, all NASCAR pieces. Turns out he was THE guy to weld up certain passages in order to make them reverse flow. His white beard came down to the edge of his welding helmet, and he said he hadn't trimmed it in over 2 decades. If you weld, you know why. Neat guy, and a fun experience for a car guy like me. Legends are everywhere, and if you stumble around, you'll find them.

@TonyS26 2 месяца назад

Respect the sacrifices to make a project happen - a lot of us are very familiar with that feeling!

@StayTunedTA 2 месяца назад

We do what we can for the people!

@user-mp9rd4hg8b 21 день назад

8:45 In the mid-80s, I built a 350 4-bolt small block in high school auto shop, with a performance cam and the stock 3 speed that came with my 69 nova and this is exactly how I shifted it.… hard and fast! I regularly revved it to 5k and once to 8K, because I forgot to shift (LOL), but she held strong. Despite its weight, I could easily beat the four-speed Corvettes at the time. I loved that car, I just wish I had the opportunity to put a four-speed and it.

@jbrownjetmech-4783 7 дней назад

Old boys got a sharp ear to hear that it had pushed the plug gap shut with just a few hits of the cylinder. Respect.

@LegitStreetCars 2 месяца назад

Man that engine is seriously cool! Didn't know anything about these.

@misc_ 2 месяца назад

Get one and put it in the TA lolol

@J-Loe 2 месяца назад

Dyno man is a crazy pro! what a great scientist to have in the chamber!

@billwessels207 Месяц назад

Many years ago Indy cars started using aluminum block Buick v6 2 valves per cylinder engines running 30 lbs of boost because they were 2 valves per cylinder push rod engines. They produced 900 horsepower. Honda because they were 4 valves per cylinder and dual overhead cams were relegated to 8 lbs of boost. It worked once they figured out the reliability issues and won a number of races for several years.

@heavymetalweld805 Месяц назад

You should do boom tubes for exhaust. I'm sure it'll sound crazy dragging down with that crazy noise.

@ooklamoc4411 2 месяца назад

Such pros. Glad to see you hooked up with an insanely knowledgeable crew. Makes a scary purchase much more palatable.

@StayTunedTA 2 месяца назад

Couldn't agree more!

@gordocarbo 2 месяца назад

@@StayTunedTA WIlling to share roughly what it cost? Was it refreshed or just a pull out

@thomasceruzzi1871 Месяц назад

@@gordocarbo he tells you straight up what it cost in the beginning of the video. $12.5K

@gordocarbo Месяц назад

@@thomasceruzzi1871 I missed it, thanks. 12.5kis a frigging steal for that engine. Got 6k more than that in a lousy Gen 1 383

@thomasceruzzi1871 Месяц назад

Yeah, I didn’t figure less than 20 used. Sounded stout too!

@hedlund88 2 месяца назад

thats one rowdy engine god damn

@StayTunedTA 2 месяца назад

Rowdy x10!

@travispeoples 2 месяца назад

My first hot rod was a 68 camaro with a solid roller 331 that peaked at 8,000 rpm with a tremec tko 600 5 speed... it was a riot and only 500 hp to the tire. I can only imagine what 811 hp would be like! Congratulations!

@mariocooldude9092 Месяц назад

I want a V-8 that will rev to the moon 😂

@d_rock_t 2 месяца назад

You're projects continue to impress. Nobody does it like you Tony (and team). Keep it up.

@billjenkins1416 2 месяца назад

The excitement (and relief) after those small problems was awesome to see. Sounded great and will definitely be fun in the 55

@StayTunedTA 2 месяца назад

Definitely a few bumps in the road but we made it happen!

@relco9825 2 месяца назад

That. Noise. I can only imagine hearing it in person. Congrats on the purchase, Tony! What a wicked engine. Can't wait to see the build in the '55 with this beast!

@rdlangston13 Месяц назад

Go to NASCAR Cup race and hear 36 of them at full tilt at the same time

@shroom903 2 месяца назад

I always told people that a nascar engine would be an awsome hotrod engine and it would nearly live forever since it was designed to live at such high rpm.

@justinjames802 2 месяца назад

There's a couple of guys here in Australia that have put these nascar motors in street/burnout cars. They sound absolutely astounding at full song!

@robertbailey1515 2 месяца назад

Your 55 is gonna be nasty with that engine and a stick, can't wait to see it together.

@Nick-dh4gm 2 месяца назад

Hi, Tony! Have followed you from your other TV show. You push the limits. I do not expect a reply, but had to comment when your video had “1955 Chevy” in the title. Your NASCAR engine small block is amazing- However, I could identify with your excitement- way back in 1970. My car did not have your NASCAR horsepower or modern tech. But- it had tilt - fiberglass front end, 55 hardtop, 4 spd, 4.56 gears, and a sb 350 Camaro engine; after using a Z/28 ‘0ff-Road service cam & springs, 12.5:1 TRW pistons, FI heads, and 780 Holley, balanced with flywheel- Redline was 9300rpm - On the street, There is something unique driving a 55, with instant explosive power in any gear. Keep shifting hard, Tony !

@StayTunedTA 2 месяца назад

Dude, appreciate you following us to RU-vid! That '55 sounds like a real wicked car, and I would be stoked to have a rip in that thing! Thanks for the watch!

@gwc_garage 2 месяца назад

Whatever you do it absolutely without question has to have an x pipe and boom tubes Or 8 into 1 headers

@telecasteroil Месяц назад

There is no substitute for years of experience and knowledge,those guys rock.

@GearHead1258 2 месяца назад

The best was when the dyno operator asked Tony, so what you wanna do now? Tony: I wanna unhook it and take it home in one piece 😂😂😂 smart man! This thing is going to be insane in your ‘55 with a manual. Can’t wait guys, keep up the great work. Awesome video, so happy for Tony and his buddies, the channel is taking off and only going to get bigger and better. That has to be a great feeling for Tony and his crew, knowing they took the risk and gamble of becoming successful in the RU-vid world, just so neat to see it all happen in front of our eyes. Keep rockin boys, we’ll keep watching! 🤘🏼🇺🇸

@StayTunedTA 2 месяца назад

Man, it has been a ton of work, late nights, tons of energy and dollars invested but it's all been a labor of love and feels amazing that we are seeing a lot of growth here. Appreciate each and every supporter. Thanks

@GearHead1258 2 месяца назад

@@StayTunedTAI’m sure bud, I’m not too far from you guys. I’m from Altoona, PA. I’ll keep supporting and spreading your content to fellow gear heads. P.S. Those Hendrick valves covers are so cool, I hope you keep them. Looks like they have a specific bolt pattern anyhow. 😂

@PatandDoopypoopy 2 месяца назад

Lenco trans, plllleeeeaaaase.

@Steelythestacker 2 месяца назад

My man, that bowtie was singing my favorite song! Can't wait to see that in the car! Awesome motor. Just awesome.

@tomthomas4666 Месяц назад

Really enjoyed your video. I had the privilege of working with my father in a automotive machine shop for about 10 years. He was like this guy running the dyno he could figure out what was wrong before anyone else knew what was going on. He was a master mechanic, machinists, welder just amazing. I miss him so much he was my hero. All the young racers loved him he was always ready to help and teach them. They all showed up at his funeral to show their love. Just blew my mind how much the guys all loved him. Good luck with your build on the 55!!!!

@remingtonwood4944 Месяц назад

Boom tubes!!!!! You gotta put some on that 55

@TJSpike 2 месяца назад

Stay tuned just keeps getting better! Love those revs!!! HELL YEAH STAY TUNED BEST DAMN SHOW ON RU-vid 🤟🤟

@StayTunedTA 2 месяца назад

Thanks a ton! We are working hard over here week after week but it's a blast!

@BUILTFORDTOUGH79 2 месяца назад

Amazing what a simple pizza will do for a crew of guys. Spirits instantly lifted! What a motor 😭… brings tears to my eyes hearing her on the dyno.

@ballafasho332 Месяц назад

“That could be your problem… i got stuff to redo 'em” Gotta love working with a guy like that. Your stomach bottoms out because your watching your investment/baby carefully and things are going amiss, your not sure if they’re minor or major problems. Then you have a team of experts around with years of experience putting out any and all fires and getting you right back to life behind your project. Awesome video.

@7cafeify Месяц назад

i stayed until OG finish with the last fine tuning for the Sound ... put my surround ALL UP ppphheewwwww!!! Wat a sound!

@lilsammywasapunkrock 2 месяца назад

Video died right at the 675hp pull! Luckily you guys got it fixed without keaving me hanging too long, i just refreshed the video and finished it right away. 800hp is killer, that thing is going to be fun.

@StayTunedTA 2 месяца назад

Sorry, little YT glitch, but we're back!

@justion337 2 месяца назад

What happened there? Video suddenly went private halfway through watching it?

@158158cow 2 месяца назад

Yeah, not sure. Back in business, fortunately!

@FrankChevyGmc_from_BE 2 месяца назад

Saw the exact same thing happening

@headlesskoopa 2 месяца назад

I thought my TV turned off

@StayTunedTA 2 месяца назад

Sorry ya'll, glitch with YT but we're back!

@frankevans1744 2 месяца назад

yeah same no idea????

@stevebastiom255 Месяц назад

So much respect here, for all of you, especially dude behind the lever and the screen. Been a hot rodder all my life!!

@highadventur Месяц назад

I did the math before you had it running and picked 816hp. I figured it would lay over at 8400. With that cam. So that it pulled to 8700 surprised me. I'd ditch the dominator for a Street car. 4150 all the way. Nice little piece there.

@robertedwards6438 2 месяца назад

That dyno guy is thinking,never again 😂😂😂

@StayTunedTA 2 месяца назад

Hahahah!

@elvispresley6392 2 месяца назад

Because it would be boring to just get a motor, throw it on the dyno and go home. What kinda' content is that ? A little suspense, mystery, problem solving, conclusion. Maybe a romance started. And the happily ever after. You guys rock . . . ✌️😎

@stevekeelin5143 2 месяца назад

Your genuine happiness about this motor is awesome! Can't wait for the videos on this project.

@j2kinflarc768 2 месяца назад

You definitely brought that engine to the right shop. The kind of guys with that kind of experience, knowledge, wisdom, and passion are getting rare. Even worse, fewer people are making the time to learn from them.

@95turbostang21 2 месяца назад

Man, I got screwed on having a 347 stroker built for me by 2 machine shops. The first machine shop that was supposed to do the job. Charge me $7600 to build one and they Screwed it up now at that point I couldn't just throw in the tail. I had all that money already spent on this motor so I had to take it to another shop to have them correct it. They charge me 3800. And still something doesn't seem right with the motor. Oh, I almost forgot that's not including $3000 on a forged rotating assembly. You can't trust machine shops today. It's a shame. Congratulations, Awesome Motor

@thomasward4505 2 месяца назад

I think you have to check behind everybody period if you don't have the measuring tools buy them!

@Nick-dh4gm 2 месяца назад

@@thomasward4505 Hate to hear of your experience; I was lucky to have a Chevy mechanic and racer, to help direct the parts and used a local racing machine shop, back in 1970- more difficult to trust, today and aftermarket parts can be unreliable.

@95turbostang21 2 месяца назад

@thomasward4505 if I know what the clearances should be and have the tools, I would have checked

@timweb1510 Месяц назад

Name the two shops so others can avoid

@Clutch_Kick187 Месяц назад

Unfortunately your story is very common.. There are lots of guys that build one for themselves, and it works because the parts they bought just to happen to line up tolerance stacking wise.. They don't check clearances that should be checked and verifed, or proper cooling/oiling mods to stock blocks.. Then they think they can do it for others, but the tolerances don't always align and they end up tearing up lots of peoples stuff. I have had a few motors built, and I have always used shops that build motors for circle track/dirt racing. Those engine guys get lots of business, and know how to put an engine together that will sustain high hp, along with high rpm for a long time.. Not these drag builders that try and make a motor last a few seconds at a time, to then claim, "Well thats racing for ya".. I have always trusted circle track builders over drag builders no matter what my goal was..

@maxburner3500 2 месяца назад

Wow, that is a monster. Would love to see in a bootlegger '55 Chevy, with modern suspension. Could be a great match against the General Mayhem in the dirt roads.

@drewc3964 Месяц назад

Love all the info that the old school engine builders have. Could watch them build and tune for daaaays! Stoked for your purchase!

@Sharkuis 2 месяца назад

This is going to be amazing, can’t wait to see more. As a fellow pizza aficionado, I have a shirt idea for you: Front: small pocket style “Stay Tuned” logo. Back: “Pizza team with a racing problem”

@StayTunedTA 2 месяца назад

Might just have to do it!

@GRUMPYOLDSURVEYOR 2 месяца назад

Love a good dyno session and the huge smiles on your faces looking forward to the build 🎉🎉🎉🎉🎉

@THEBULLETPROOFGARAGE Месяц назад

Pretty damn impressive, Tony! Can't wait to see you get the '55 on the street with this monster! Scott

@michaelmounts5652 2 месяца назад

The best video you’ve yet I loved it. I think what put it over the top was watching you and how nervous you got when it was on the Dino and when you had those couple glitches you got real quiet great great video.

@samrotheray5805 22 дня назад

I love the bibs man. I rock em as well. Awesome engine. Been watching for a long time. Good luck with the build.

@DigitalN 2 месяца назад

Tony I love watching your channel because of all the cool different projects you actually work on, not just buy to drive home and park it for 2 years. Keep it up man! Can’t wait to see what you do with the 55

@dustinwalker8576 Месяц назад

I’m truly happy for this guy… Tony is one of my fav tv car guys, always real, and you can tell he is legitimately stoked to have an engine that any real gear head would dream of having! Congrats on the results, and can’t wait to see it in action!

@tptrsn 2 месяца назад

Now THIS type of content is THE WIN!!! Hope you can make some absolutely epic videos with the moonshiner vibe '55 screaming through the woods, drifting and roosting. So stoked for it! Are you going to figure out how to run it on E85 so you don't have to keep loading it up with expensive race gas?

@kelleycoon2070 26 дней назад

Sounds awesome. always been a Chevy fan. I used to have a 65 Chevelle SS and a 62 nova convertible.

@scotty197878 2 месяца назад

What an absolute good ‘ol boy that tuner guy is! 👌 great to watch and he’s the sort of guy I’d be happy to trust with my stuff too 👍🇺🇸

@CanadianClassicCarNut 2 месяца назад

Stay Tuned is one of the highlights of my weekend. You never disappoint. Congratulations on your Dyno results!

@brianlafollette7530 Месяц назад

Hope to see ya'll at Southeast Street & Yeet!

@motorhead1964 25 дней назад

so happy the motor is everything you were expecting. Big chance buying used stuff so Im waiting for some pulls in the 55

@klmorris1576 2 месяца назад

TA this is a fantastic channel, the excitement and passion for the builds is incredible

@DrBruhle 2 месяца назад

Ive been watching you since the HRG days on motor trend. You and the boys put out consistent high quality videos. Hope you have continued success for many years to come.

@StayTunedTA 2 месяца назад

I appreciate that! Thanks for watching.

@robertmcdevitt7873 2 месяца назад

I like how he says “barely”. The most gracious folks to be around for dyno testing.

@p9raceway759 2 месяца назад

Tony !!! 811 tire smoking HP’s…Holy Hell ☁️

@itwoammend1735 2 месяца назад

Almost exactly 2 hp per cube on the first real pull! That is going to be a fun car to drive! Can't wait to see it done.

@realnikonlover6207 Месяц назад

What a jewel. Homerun on that engine buy. What a great shop and guys helping you out. Winning!

@robertwhitey6621 Месяц назад

Worked at Detroit Dragway in the 70’s I used to work in the ET booth and have handed time slips to all the big name drivers including Grumpy Jenkins….awesome find Tony that 55 will definitely rock

@StayTunedTA Месяц назад

That's so cool!

@shannonbunch1003 Месяц назад

Love the engine... Love your channel... And a special thanks to Wilson race engines, these guy's got their $h1T together. ..

@AnDrEw122100 2 месяца назад

I spied that thing a while back in one of your videos and am stoked . Sb2.2’s are amazing. High rpm small block letsssss goooo!

@joshbillings7290 2 месяца назад

Found you from the VGG collaboration. Subbed and excited for this build! Engine is a monster!

@thedragon2299 2 месяца назад

Congratulations, that's one killer engine! Loving the channel man! 🐲

@chuckmorris7553 2 месяца назад

I've said it before, I'll say it again, the best channel on RU-vid. Your nervous excitement was great to watch! Engine looks and sounds amazing, hurry up and get it in the '55!

@paulcombes3782 20 дней назад

Chris Wilson , legend ! I was hanging on his every word . Great engine man . Nothing sounds as good as an American made V8 at high revs .

@TomPauls007 2 месяца назад

What a set of gearheads! cool. OOhh the sound of that mill pulling at 8K. Need to buy that DVD!!

@MikeY77z28 2 месяца назад

Tony.Very cool choice of engine for your 55.With a manual trans.Awesome!

@jimciancio9005 Месяц назад

406CID is a Killer Combination of bore to stroke ratio when you have a over square bore big bore shorter stroke equals high rpm power potential over a longer stroke and smaller bore.

@tjjoseph333 2 месяца назад

"Congratulations" I like this guy...and Congrats!!! Beautiful motor!

@anthonymestichelli9979 Месяц назад

Nice I thought it would do just over 800 HP. Good luck with it Tony. Can't wait to see what it does in the 55 at the strip.

@reallybadaim118 Месяц назад

Nice piece. Looking forward to seeing the finished 55 with this motor.

@Clutch_Kick187 Месяц назад

Nothing like high hp N/A motors IMO.. I love the snappiness and feeling of ringing them out.. I sold my 2016 Gen2 Mustang 5.0 with VMP TVS that made 760whp on the small pulley, but usually drove it on the bigger one that made about 660whp.. it was fun but very one sided, it was only fun doing pulls like a crotch rocket.. It was boring to drive everywhere else, and didn't sound good unless you were at full song.. Sold it, bought a 22 6th gen 1LE Camaro and built the motor with ported intake, ported heads, springs, retainers, BTR camshaft, headers, halfshafts, & clutch.. It made 608whp on the rollers & is so much more fun.. The car sounds amazing, and can corner like a beast on backroads, along with highway pulls/roll races.. I don't dig race it but its still the most fun car I've ever had.. 600wheel N/A is so much more useable, and being a manual it just ups the fun factor over an auto supercharged car that spins tires no matter what.. 600wheel is the perfect number for max enjoyment on the streets.. Anymore and its just too much..

@user-ic1tq5uj7f 2 месяца назад

That small block sings! Super sick Tony, that thing is guarenteed to put a smile on your face! 👍 👍

@Naptown5-0 Месяц назад

Its amazing how you could close ur eyes and know that’s a Nascar motor🔥

@monkeyfoodgarden 2 месяца назад

Liking what y'all are thinking for the 55. Old NASCAR moonshine runner vibe now your talking. Really like the channel y'all do amazing work. That motor is crazy. Can't wait to see this project done.

@onlya3rd264 2 месяца назад

I been telling my friends that I would love to have one of those nascar motors even after they ran it for a race forever. They are some badass engines. Good for you guys can’t wait to see it in your 55 with tires a blazing 🙌🙌🙌 awesome video thanks for the entertainment 👍