No video :(

I Bought The World's Smallest Gas Powered Go Kart (Will It Run?)

Подписаться 464 тыс.

Просмотров 61 тыс.

50% 1

I buy one of the smallest gas powered go karts that I have ever seen. This go kart is locked up and needs a lot of work. Will it run? #Small, #Rare,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Опубликовано:

15 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 285

@2vintage 3 года назад

Has anyone ever owned one of these before? Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for the support!

@jmendo2546 3 года назад

You should have used heat~torch would have loosened the valve, and clean the flywheel rust and coil rust with sand paper

@jamescherry6921 3 года назад

It originally would of had a rear spoiler on it, the hand controls were awesome and rare in 1990 , back then only time I ever saw hand controls was on the Honda Odyssey

@ford1546 3 года назад

people think epoxy is so good but it is not! you have to sand it on the inside and use fiberglass or something special. consult with a body shop! often plastic repairs are weaker than they were before

@lucasgoodman5705 3 года назад

You should get another cr 80.

@thebenthermit4067 3 года назад

@@ford1546 yup, depends on the scenario, but plastic stuff like that, even when sanded, it just busts off. Drill and zipties, or get to melting. Even with soldering some plastic, if you don't get it good enough it will just crack again too

@jesseroberts4074 3 года назад

That was so painful trying to watch you pound out that valve

@waffalobill Год назад

This just popped up on my feed. Seen him fix alot of stuff. Couldn't watch the whole video. To painful. It may run but not the way it should. He trashed the valve seat, deck surface, governor spring stretched out cause he didn't unhook it. Should have took his time. Tear it down. Soak it.

@Mikefngarage 3 года назад

AS HES PULLING on the pull string.....IM YELLING NOOOOO....pull the cover off and turn it the opposite way so you the engine will unfree itself.

@BLSdarrin 3 года назад

Shakes my head every time I watch him tear into an engine , entertaining for sure

@jman6030 3 года назад

Surprised it ran after the hammer/valve persuasion lol

@Mikefngarage 3 года назад

29:10 he pours enough gas in there to start a V8 engine......then it splashes him in the face....That ought to tell you the intake valve is not seating.

@Mikefngarage 3 года назад

that's OK kid I still watch your stuff.

@anayal8tr130 3 года назад

More than a v8 like a v12 😂

@jakecarlile2294 3 года назад

@@anayal8tr130 v12? You mean cruise ship?

@AZVIDS 2 года назад

Part of the entertainment IMHO👍

@gtisid 3 года назад

that was like a damn horror movie

@jakecarlile2294 3 года назад

Glad i wasnt the only one. I love his content but this one was really cringe worthy. Definitely dont recommend anyone to use force like that. Let it soak with some good solvent and then be gentler the next day mean while work on another project

@thebenthermit4067 3 года назад

lol, yeah. He seems pretty young though, so a level of forgiveness is probably in order. Plus you know we all have been there where you just start getting flailing and throwing out your mother's favorite words

@thebenthermit4067 3 года назад

@How to Paint with Brettski lol, yeah for sure! That hammer under the valve was pretty sexy though

@2vintage 3 года назад

I was going to junk the engine if I couldn't get the vlave out. Had to use a lot of force. Soaking it wouldn't cut it for this project.

@Old_Indian_Trick 3 года назад

Also want to pay attention to cylinder head bolt placement. Use a piece of cardboard and put the bolts through it in the place they are on the engine so you put them back in the same spot. Most are the same length but by the exhaust they are longer.

@wannawin95 3 года назад

Briggs made some solid stuff back in the day. They were built like absolute tanks. I've pulled them out of the trash with low oil, no oil, and siezed, but they've always come back to life.

@thebenthermit4067 3 года назад

Yes sir, I even love most of their new stuff. People really take them for granted bc the motors are on almost everything. The only other brand I put up next to them is the Kawa Commercial Mower engines. I've seen some crappy Kohler's, Tecumseh's are generally the worst. These 3 and 5hp engine feel awesome though. Love the I/C series as well, a lot quieter/smoother

@sillygoosesmallengines1994 3 года назад

Briggs and honda most durable EVER no one will change this for me

@ryanbrohan600 3 года назад

I'm an Australian but my god do I love the all mighty American Briggs and Stratton 💪built like a tank

@thebenthermit4067 3 года назад

@@sillygoosesmallengines1994 you're right, the Honda motors are awesome. Sometimes find it harder to find parts, not too bad on most of their stuff though. I finished up a real nice F501 Tiller for a buddy. He managed to mess up the threads for the plug. There was only one head on ebay that we could find. Luckily when he cross threaded the plug it was far enough in that he still had good compression.

@M.TTT. 3 года назад

@@thebenthermit4067 eh some after the vanguard were junk

@dj24sevenDnB 3 года назад

You should of give cars and cameras a look they love these little engines

@bobbyschram2206 3 года назад

I was just about to say the same thing

@brandoncollins6366 3 года назад

Cars and cameras n u would make a sick team. yeah I see how that y'all would say f*** centrifugal clutch

@craigkirkland 3 года назад

Yea but there hacks and quality of work is shit. They rush and ghetto everything and if not its the most over elaborate waste of time.

@lifeononeweel3008 3 года назад

@@craigkirkland What

@Cnzxco 3 года назад

@@craigkirkland yo wth lmao y u watch them den

@colinculverwell325 3 года назад

Thats got to be a first. Removing a valve with a claw hammer 😱

@rigguyjt 3 года назад

Leave him alone, he loves his claw hammer.

@rigguyjt 3 года назад

…and using the head mating surface to pry against.

@burnheretic3950 3 года назад

@@rigguyjt little simple things can make a big difference, like getting some brass shim stock to put between that mating surface and your hammer to avoid damaging it. That is, if you absolutely must go about it that way.

@RobertA-jw4pe 3 года назад

Watching you work with tools is very difficult to do you definitely need a mentor

@slowwrx1049 3 года назад

Go kart 2v is a combo I didn’t think I’d see

@johnstogsdall8582 3 года назад

Put you a thinner head gasket on it and it'll give you just a little more compression equaling more power

@Mikefngarage 3 года назад

good thing it has hand brakes and throttle.....BUT at my height I would need buddy pegs in front of the wing just to ride it.

@davesplace1307 3 года назад

You need to go pick up a carburetor diaphragm kit, you cant really clean the carbs to good you have to get new diaphragm. Should pick up the rest of the gaskets as well

@2vintage 3 года назад

Already ordered!

@davesplace1307 3 года назад

@@2vintage they should've been fairly easy to find and cheap. Local parts store has them. Tractor supply or a mower shop. Hopefully you found the model type code number

@chrismiller5258 3 года назад

Nice kart! Those are bullet proof, can't wait to see what you'll end up doing with it.

@rigguyjt 3 года назад

I know that valve is stuck but take it easy on those mating surfaces Joe.

@rigguyjt 3 года назад

Good to see it run after all that.

@RT-vo2vh 3 года назад

That engine only has like 50 parts total including bolts ... good one to tear down completely ...

@RT-vo2vh 3 года назад

I got in trouble at age 12 for tearing apart my minibike engine .... every bolt ... same 3.5 Briggs engine ... i had a book and learned 4 stroke engines doing this ... used hose clamps as ring compressors ... hence my "sentimental" interest ... btw, it came out perfect with new rings and lapping the valves ... sorry, oldguy story 😎 👴👴👴

@Mikefngarage 3 года назад

One squirt of FREEALL and that valve would have come loose in 5 seconds. that WD 40 is a waste of my time....I never use it.

@sillygoosesmallengines1994 3 года назад

Thank u I hate that he uses wd 40 if anything it makes stuff worse sometimes

@sillygoosesmallengines1994 3 года назад

I use liquid wrench penetrating oil

@Mikefngarage 3 года назад

@@sillygoosesmallengines1994 I no longer have any around the shop. total waste of money and time. FREEALL and Marvel mystery oil in a old squirt oil can is about all I use anymore.

@superted1000 3 года назад

Should do a collaboration with the "cars and cameras" guys... they would love this!

@jamescherry6921 3 года назад

I had the exact same kart when I was a kid except for mine said Kendall motor oil for the sponsor, my dad won it for a dollar raffle at a local auto parts store around 1990

@2vintage 3 года назад

That's awesome!

@backyardrestorations 3 года назад

Perfect thing to wake up to.

@gazclayton787 3 года назад

How is it the world's smallest 🤔

@Goflickyourself239 3 года назад

Asked myself the same question

@coopdoesit7442 3 года назад

He said it's probably the smallest one he has ever seen so I'd say he is going by his experience.

@robspear03 3 года назад

@@coopdoesit7442 title says " i bought the worlds smallest..." Learn to read.

@shaynedonnelly374 3 года назад

@@coopdoesit7442 well Clark I'd say you are wrong but you're definately wrong lol title says world's smallest go cart and yes he does say in the beginning of the video smallest 1 he's seen. Then again he is clueless and I wouldn't let him touch tools let alone my toys

@coopdoesit7442 3 года назад

I'd say stop watching him then if your that touchy about it lol! Honestly i don't always like the way he goes about some things he does an yes there could be better ways to go about it ! I work on everything from atvs lawn mowers vehicles aslo did restoration on 70s truck for 6 years built some from the frame up an also weld an fabricat so yeah I'd have a clue!! I'm just glad to see some of the younger generation working on stuff yeah i might cringe at the way they do some things but some of the best welders,mechanics an other professions are self taught. Regardless of the title unless you went deaf he corrects it an says (that I've seen) if you can't make the emotional adjustment from the title to the verbal correction maybe the internet is not the place for you guys!

@davesplace1307 3 года назад

Briggs and stratton is a perfect power house for this kinda kart. Alot of performance parts can be done. For the belt and clutch... they are a pain to find and pretty expensive for old stuff

@josephlyons8929 3 года назад

Pretty neat. 👍 I build the bikes huffy cranbrookes with the little Chinese motor man I tell you what they hall azs!! Good video 😎 bro keep them coming.

@scrappyhustler7467 3 года назад

When I was a younger child I used to see the same go-cart in a sears Xmas wish book so that was mid 80s early 90s

@fullmetaljacket7 3 года назад

Scrunchous... definitely from the 80s.

@chucksanders7788 3 года назад

That thing would be fun with a 22 HP vtwin.

@jonnyonwheels 3 года назад

I definitely think because this was designed for a smaller/lighter driver than you Joe, it might just need a special test-driver….aka: Minty Jade!

@2vintage 3 года назад

Haha I will see if she will be up to riding it!

@MK2Scirocco 3 года назад

Saw these on marketplace and tried to get them, but you beat me to it 😂 can't wait to see what you do with them!

@ty717atv4 3 года назад

Keep these kind of videos coming I really enjoy watching thanks buddy

@megamindtvsydney3967 3 года назад

Awesome job repairing that motor without breaking anything, nice episode mate.

@mehmetefeacar2783 3 года назад

Looking forward to the first ride

@williamhelms9942 Год назад

@6:27, PB Blaster is rust penetrant, WD-40 is moisture displacement. ATF + 30% Acetone really does the job though!

@joecolanjr.8149 3 года назад

Pretty cool. Definitely different!! Good luck!!

@jmudd5449 3 года назад

Why can't you clean things before you start working on them?

@anayal8tr130 3 года назад

I’ve sold about 300 bikes before and it’s to see if it runs or not first , why waist time pressure washing the bike and have oil all over your residence and find out it don’t run

@jmudd5449 3 года назад

Cleaning them with a pressure washer helps ensure dirt isn't going into the engine, and causing premature failure. Not saying full detail.

@DirtTechTV 3 года назад

That thing looks like it would be fun!! Love the vids!! Keep up the good work.

@chriskorombos4587 3 года назад

Have you considered becoming a dentist? 22:03 xD

@diywithreza 3 года назад

18:22 That's how you came to this world my son

@tomphillips2473 3 года назад

Nice video! I think after an hour I would have checked to see if a 212 Predator from Harbor freight would’ve fit it 🤣

@davesplace1307 3 года назад

Talk about ruining a valve! Lmao looks like it's time to get better valves and tighter springs. Get a fly wheel too

@devonkamrowski466 Год назад

Little tip keep your hand over the hole on carb, help start them oldies up easier

@wesleyoos71 3 года назад

Once you get it unstuck there's about a 50 percent chance your gonna have to clean the points if it has them. It looks older so i imagine it does

@Derekjudlin 3 года назад

built one with my stepdad at about 11 years old. Didn't have the fancy plastics but i started with a 3.5 hp briggs rototiller engine and later bumped it up to 5hp briggs. loved that thing. ran slicks on the rear so i could drift around the field.

@ngproductions6074 3 года назад

Super excited for you do change it up and do something like this!!!!

@StayTunedMoto 2 года назад

Those are rare I had one as kid all plastic frame and yeah they always bust up. Mine had broken off front spoiler too

@gregorypierce6703 3 года назад

Look it up again, the company came up and was sold. 👍👍

@davidmcfarlin9132 3 года назад

Dude, they make tool for this! I hope it will run again....🎱

@larrywarner9314 3 года назад

You need a valve guide hone ,or valve guide reamer

@chickenbutt.3421 3 года назад

That's a cool little setup I like that cart

@j.w.3345 3 года назад

I pick up old mini bikes and karts that have been sitting outside for a few bucks, fix them and sell them. I also restore old garden tractors from the 60s and 70s. I cringed when you used the claw on the hammer! It's not a straight upward pull, easy to bend the stem. WD-40 has it's uses (yes I use it), but for heavily rusted/STUCK parts/valves, I have had MUCH better results using 'KANO Aerokroil' or Freeall and some heat from a heat gun on high or a propane torch.. Anyhow..... GREAT channel! Cool little kart!

@marvinwilbur9903 3 года назад

try checking the gap on the fly wheel and the coil and the key way while ya got it turn down... lap the valve

@tpghl5225 3 года назад

Marvel mystery oil down the cylinder may help too. I use that stuff on these types of engines

@davidmcfarlin9132 3 года назад

Love you, that was painful!

@larrywarner9314 3 года назад

😂😂I'm glade your not fixing my engine

@scottthomson4561 3 года назад

Nice I mentioned a go cart last week. Class

@Orbacron 3 года назад

Put something under the frame to raise the drive wheel off the ground, or a motorcycle jack if you have one. You might want to lube the recoil spring and one way pull start bearings with some motor oil before you ride it, or she's gonna be a squeeler

@adamdennis5617 3 года назад

That's the brand name they were made through Sears or to sell through Sears and them type of store kind of rare hard-to-find parts for I had one had a real crappy drive system with a belt

@tristanbennett6007 3 года назад

Bro no frickin way I was on marketplace and I was looking at that u bought it under me u must live in Wisconsin

@dirtbikesrc6402 3 года назад

Damn that is small

@jonbaggarly6969 3 года назад

i cant wait to see u ride that hosscat of a kart lol be careful lil motos have gotten me hurt alot worse thsn big ones

@reaper20015 2 года назад

Damn, and all this time I've been using a claw hammer the wrong way. 🥺

@dellstudio10 3 года назад

I've got a small go kart with the same 3HP Briggs. Has plenty of torque to pull me up the hill's. Not fast by any means so I just use it when I want to cruise around on the road. Wouldn't recommend them for off roading though. No suspension, small tires, one wheel peel and low ground clearance don't do well off road. But it sure is fun on the pavement.

@diznuts7225 3 года назад

That is sick

@kernelbadness 3 года назад

Goooooooooodnneeessssssss 🔨⚒ poor Lil Briggs

@lordfudgepuppet 3 года назад

This is great for the channel mixen it up lol.

@connersnow298 3 года назад

Awesome vid nice cart

@larrywarner9314 3 года назад

I repair small engines for a living you can use a heat gun on that stuck valve it should free it up then I'd take the valve out clean lap it

@j.w.3345 3 года назад

Yeah...using the claws of the hammer was a bit painful to watch.

@genebrewer1422 3 года назад

I was screaming put heat on it WD-40 only does so much... I've watched him a lot yelling hand held torch for heat up stuff

@EJ-74 3 года назад

Bro get a electric starter like we use to use at the track You could find away to use it on bikes also It definitely makes life so much easier hehe Cool little cart bro I would put a 5hp stage 3-4 or better yet a 50-80cc 2 stroke shifter carts are awesome ✌️

@hairymcsnatch1340 3 года назад

Had one of those just red, broke in the same place on the front

@vadimkargin3200 3 года назад

Pretty cool

@thebigguy8306 Год назад

Thanks for another informative video

@devinkaiser4656 9 месяцев назад

clean the magnets on the flywheel wire sand paper they are rusty also the bottom of the coil sand it.

@iancampbell6002 2 года назад

You need to start using pb blaster or marvels mystery oil..their penitrating oils...wd40 is just lubricant...will def help alot

@ceejay6882 Год назад

Removing the head wasn't necessary. After soaking the cylinder for a few hours in wd40, light taps with a wooden dowel through the spark plug hole, then remove the starter housing and gently turn back and forward in small increments with a ratchet till it frees up. Valve could have been freed up with a soaking of carb cleaner through the intake port and keeper.

@robertwolfe8680 Год назад

You should have a work bench to put your go kart on at a better work height, you can also do this for motorcycles also. I’ve worked on bikes for years ( my son races dirt bikes) it makes everything much easier and is better for your back. Love your videos it’s good to see that you know what you are doing. Keep up the great work.

@simonmusicka5552 3 года назад

I’d say the intake valve is bent a tad as the fuel pushed out the carb when ya pulled the engine over

@2vintage 3 года назад

Maybe a tad haha

@danielhelbig1116 3 года назад

You should lift it/give it bigger off-road tires than take it through the woods that would be incredible

@coreygilbert62 3 года назад

You know what works awsome unsticking engines pour some ATF in it works wonders wd works well to

@wesleyoos71 3 года назад

Hopefully no one pulled on it to hard trying to get it unstuck. That's a good way to bend a push rod

@anthonyguerrera6572 3 года назад

The intake valves is not opening because it’s not ready to. It has to do a full revolution. SMH 🤦

@aaronmelton2733 3 года назад

You work like a Viking man wtf you got goin on here you’re a danger with a hammer😂

@chrisatc627 3 года назад

Water displacement 40 is not a good penetrating oil, acetone and trans fluid mix 👍

@stopcensoringmyfreespeech3280 3 года назад

I use to buy the little carts and move the seat back and put 5 hp on them. It needs a new diaphragm in the carb so it can pump gas and cleaned. My wife was embarrassed when I rode them LOL All the kids in the family loved my carts. They will run about 35 mph or sometimes close to forty. They are fun to ride even all my cousins rode my carts with me no denning how much fun they are.

@larrywarner9314 3 года назад

You do realize until you take out that old gas it's still pulling that shitty fuel into the intake

@mikestowe6136 3 года назад

you didnt swear enough thats why that valve didnt come out lol

@ricerneon399 3 года назад

Smaller go carts are goped go quad. You should look for a goped or a standup jetski.

@RcOffroad9513 3 года назад

I would watch more often if there were less ads.

@Kurtman88 3 года назад

Stop being so cheap and get premium.

@gabewest305 3 года назад

It’s a Briggs and Stratton it’ll run

@DirtTechTV 3 года назад

That one oughta but if you tried to start a new one that’s been sitting there’s no chance.😂

@seanmurray2494 3 года назад

@@DirtTechTV I bought a Briggs mower that was sitting and even after changing the oil cleaning the carb and getting a new air filter it will still not run right so yeah the new ones are pretty ba

@c0munguyforcaz 3 года назад

The title should be, will I fit???

@josephlyons8929 3 года назад

Always clean the magneto on a rusty engine bub

@jaredmcquiniff5362 2 года назад

Does that motor only have a 1.00” stroke?

@2vintageDeamonFan 3 года назад

Another great video from joe :)

@nivesknight 2 года назад

200 is crazy!!!! 🤪 😜 I would have past at any much more then 10% of that....

@brianmeattey4151 3 года назад

You should take that moter off and upgrade it whith a stage 2 at least kit .and or put a lil 2 stroke dirtike moter on it and hold on tight .

@Jbink524 3 года назад

Convert it to RC!!

@maxtheroofer8004 3 года назад

if it were me, i would try and find a 5HP briggs engine to replace that. 3hp aint going to be enough for an adult. 5hp might make it fun.

@louisjohnsonjr.4934 3 года назад

That wheel alignment is terrible and going to need some serious attention before riding

@dirtripper1808 3 года назад

Im pretty sure its not the rings getting stuck. Look like you’re hydrolocking with the gas you pour into the carb.clean that carb and im sure it’ll be just fine