I Build My Dream Truck. F250 Super Duty 8" lift Rough Country 53" XZL Military Tires 

I've never seen a chainsaw used with such precision

Hell yah!! 🤘🏻 Some next level shenanigans and I’m here for it. I laughed so hard at your dad. “Dad tell them to subscribe” Dad- “Go miners” 😂😂

After that turbo whistle and the wooo. That deserved a sub and a like 🤤😆

Please make the 6.0 excursion woooooo into a short lmao 🤣 😂 woooooo Woooooooooooooo WOOOOOOOOOOO

Oh man. Love it. Can't wait to see it in action!

That is nuts. Given how narrow the roads are here in the UK, you would have to drive it over cars to get down them.. which that would probably do no problem.

Awesome job. If you ever need to get back in that lift, have your friend raise the arms above the tires and carefully pull in.

Man I bet those Hubs are loving you with them giant ass tires and lift!!!

Good sh*t man! Had to laugh, I had the sawzall out for the first 3, took me an hour per tire. Got pissed off and dragged my chain saw out on the last one.

I can't wait to see that thing dialed in & driving down the road!

Those tires are going stress some components, can't wait to see follow-up videos.

Dang Great job!!!!

That video was great that freaking truck look awesome ... I love the color that you painted the rims ...can't wait for your next video...thanks bub

Nice shop

Nice. Love it. She a beast

Nuthin says Merica! Like a 250 on 53's ooooowiiiii! Call that thing "never stuck" machine

Subbed because of this single video amazing truck a beautiful excursion 2 vehicles i want in my fleet

MY BROTHER!!! You are amazing!!!

Rip power steering pump. Lol. Cool build! 😎

That looks very nice

Looks pretty cool!! 👍👍

Awesome brother looks great and Merry Christmas to your family from mine

I hope you have some upgraded axles on there💯😂

Your dream truck is a 6.0. Time to have better dreams. Lol

I faaaaking love it!!!!

This is some top notch content. Came here from TikTok after I saw what you were doing I bought some 36” rims and tires from eastern surplus for my 70s dodge. I ran into the spacer issue as well.

That no flat wood burn for days. 😂😂😂

Well I subscribed! That wheel color is perfect for those tires.

I did somthing similar, but I installed 5 ton rockwell's with 53's !

Love seeing a channel from Southern Oregon hello from Grants Pass

como siempre los mejores videos, siempre tengo tus videos de fondo en mi tienda de autopartes ! un abrazo grande desde argentina

Love the truck im running 37s on mine

I already done this with my 2001 F250 ford back in 2012 ask for photos if u want to see? 10' 2" total height i had to step down on my roof of my house from the truck!

There is a technique for taking those runflat inserts out. I personally wouldn't use a chainsaw but if I was using your plan I would floss a chunk of sheet metal between the tire and insert

At least u done onna 2500 frame....😁👍summa these You tube NECKRES are riggin 44's & larger on 1500's with Dana 44 and smaller 😢☹🤔🤣 NICE shop & BUILD here fellers... 😁👍

Your channel gonna blow up soon, 2022 here we come

Old blue here man that's badass I love it

That whistle from 1:20 to 1:39 sounds... SO... FUCKING... GOOD! Sweet rigs in this vid! PS not that stupid.

Man that bb look’s so gooooooooood

just subscribed today because im with stupid also...like these guys lmao.....im 5 minutes in on the first video ive seen from this guy ever and love it already

Be ready to upgrade running gear and engine. Needs more.torqie to turn those big 53s , stock dinky little Axel's will snap and break up soon enough. We had same problem with our 53 s on dads mud truck. Allways wise.to start build by overbuilt running gear to support those tires and an engine that can provide over 400 hp to spin them 53s. Also a transmission that can handle the power as well. Big wheels mean big money on running gear ect ect. Money pit if off roading. Enjoy they journey. We did these type of builds in the 90s and up till 2010. Awesome fun. Thanks for share

And you realize that the lugs that come on the spacer are the right ones that you use to mount to the axle at least from all my experience using spacers

Big tires on small rims looks mean as hell!

I need those tires and time for a body lift lol

US Army veteran, who would be super happy with that excursion lol

Our trucks looks the exact same

I'm jot a Ford fan but your build is awesome 👌

Buddy of mine fit the same tires years back. Didn't make it 50 miles before the 44s went back on. It was a death trap.

Put a couple of leveling kits in the front

Yall aint stupid!! Just a tad beyond crazy!!! Hahahahahah I still wanna send the 2004 SVT Lightning to ya. Even though the shipment would be from damm near sea to shining sea!! Keep on keeping on Doc! Semper FI

get your self a 3 or 3.5 leveling kit for the front and just a long enough leaf spring bolt to bolt it to the 8in leafs you’ll get more lift

You just gotta chain the tire down and then wrap another chain around the run flat and use the car lift to pull it out. I used a engine lift. It works on newer tires but ours were old and the rim was rusted to rubber on the run flat so getting the rim out was way harder then the run flat was. It bent the hydraulic ram :D first time I ever seen that happen

🤣👍🏿I love it...next it's time for some 5 ton Rockwell's axles....looks like you're in Ford country 🤙🏿💪🏿💪🏿

Yall need a mine series just using yo trucks

Brother I just found you today we are kindred spirits hell yeah get it did

Love what your doing!! Don't listen to the haters! Everyone has assholes and opinions!

This is some awesome shit I tell ya ..where ya at in oregon for the snow wheeling .

Chain the outside of the tire to something stationary and use a truck to pull the run flat out

Well heck if I could I would let you do this with mine is F250 7.3 old beat up but runs great ,,,, I love this stuff keep up the great work ,,, I do not ,, put tubes in this tires ,, I do not no if that would work just a idea ,,, love trippy stuff

The way i look at it if it makes you happy who cares if people think it looks stupid but i think it looks badass

You could do this to pretty much any truck with a big enough lift kit and a set a 20 inch wheels

So you just need 4 more wheels and tires to run duel's front and back right 👍👌???? Since if each tire and wheel was so freaking heavy you had to use a winch to drag it off the trailer😅😂😊!!!! Now you need more floatation and find a way to lighten up the wheels!!!!🤔😜🥰🤠🥰🧸🦣🐻 And Howdy Howdy from DeadHorse Alaska!!!!

Yahoo a new video

If you're cutting rubber get a wood blade for a saw zaw and take a grinder and grind down the edge of the blade like a knife and you'll see a big difference in how the blade cuts

The black rims look much better

Did you increase your rotor and caliper sizes? Will be an interesting ride.

time to get 2 1/2 ton rock wells

I'm running 17x47x16.5 supper swampers on my truck

looks amazing. wonder how much mpg will you get now? maybe 7 mpg plus the tranny will be so stressed, maybe cool it?

You cannot run 53's with factory gearing, you will smoke your trans.

America 🇺🇸

Need some bead lock wheels

Why are you not playing some type of mud digger music in the background? Hold my beer! Lol

Kinda looks like your buddy built you a dream truck. Not sure why you would by different size lug nuts when it seems you could have gotten different size socket.

everyone is crazy

there's a supercab superduty in lebonan oregon on 53/54" ill see if I can find you a pic.

That's a lot of tire for what appears to be stock hubs.

We’ll see how long the axels hold up

Dam, you do have it bad. A yard full of Ford's would keep a man always working on something. I guess with 5 or 6 surely one .may run at a time.

Fucking awesome!!! 🤘🤘

Should've just slung some Rockwell axles under it. Your poor brakes!! 😆

Did you modify the wheels or the tires at all? I'm trying to mount some on my 94 f350

pulled a whistlin diesel on them wheels

Torque down til it strips back it off half turn . Nasscar tight

The axles look like toothpicks compared to the 16.00R20 XZL. These are normally on a Unimog minimum or much much bigger trucks with 10, 20 ton axles. God help your transmission bits

Looks cool, but that thing is going to kind of suck in all honesty. As long as you enjoy it!

If you put those tires on a dual wheel truck that would have been even more insane. I may have missed it in your video but could you tell me the brand and what the tires are? What I mean is like Firestone destination at2 if ya don’t mind. But love the truck btw!

But when are you going to address the gearing? Like 4.56 gears plus portals? Rip transmission

Just reverse the lug nuts next time the spacer one are the same as the truck but smaller outside diameter and the factory ones work on the spacers

I would have left the rims black, just my opinion

What in the world turbo is in that 6.0 excursion

Wouldn’t it have been easier to just just got adapters for the military rims? I mean your running spacers.

If you get that the whole dare I will be surprised

Did you weigh the tires… or know what they weigh each?

Love the 53" they'd look good on my bronco. Im looking for some 35" what are you doing with the ones you took the rims from

Is it street legal? And ya those run flats are a pain to remove even the small ones suck can only imagine 50inch ones

What head lights are those

Pretty darn awesome build buddy!! But will the tranny hold up or the axles?? Witch one do you think will go first??? Awesome video buddy!!

why didnt you just raise the lift up past the tires?

Hope your putting Hugh gears like 5:13 in it