I built a Structural Linear Actuator for $20 using a Wiper Motor | Solar Electric Campervan Build

Подписаться 13 тыс.

Просмотров 308 тыс.

50% 1

I go into some detail on how I built these actuators which I am using to make a variable height table and bed in my campervan.
We're driving from Alaska to Argentina, only using renewable energy in our 100% Electric, Solar Powered Camper Van.
💪 👉 SUPPORT US on PATREON: / routedelsol
🖥️ 👉 SUBSCRIBE: bit.ly/RouteDe...
🎧 🏖️ 👉 Playlist: Alaska to Argentina Traveling: bit.ly/Alaskat...
🎧 🚐 👉 Playlist: By Road Trip Traveling Vlogs RU-vid: bit.ly/ByRoadTrip
🌏 👉 More information: www.routedelso...
INSTAGRAM: / routedelsol
Facebook: / routedelsol
Our Camera Gear:
Vlogging Camera - amzn.to/2WFyoSa
Photography Camera - amzn.to/2WF7p98
Videography Camera - amzn.to/2WDSZWZ
Lenses:
Vlogging - amzn.to/2WAb0p3
Photography - amzn.to/2WDl7te
Videography - amzn.to/2WDwwt5
Drone - amzn.to/2WA2Pcs
Stabilizer - amzn.to/2WDTdgN
Batteries:
Canon - amzn.to/2WDxHJ1
Sony - amzn.to/2WAZUAk
Drone - amzn.to/2WHPgI9
#vanilfe #electricvehicle #SolarVan
#AlaskatoArgentina #VanTourSolar #paradise
#TravelingVan #SolarElectricVan

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@wrayxphoto Месяц назад

Did you notice that the first one tested at 3.00 the blue and white wires when used went in opposite directions. I guess that would be good for up and down. Awesome idea can't wait to try myself...

@Nosaesoh 3 года назад

Being a broke bloke can make you the mother of cheap invetion! Will you be doing somthing similar for the Solar Array swing arms?

@RouteDelSol 3 года назад

We will be doing something a little more robust for the array but yes a similar concept 😁

@MarkThomas123 5 месяцев назад

Were you able to get it worked out? 4 motors running close to the same? Was there enough power?

@nobrizzle 3 года назад

The grub screws are also called set screws.

@RouteDelSol 3 года назад

So many names 🤪 🙌

@DesertSessions93 2 года назад

Set screws have a head

@brooksironworksinc.630 21 день назад

Im making my own verson of a pop up on an old one but mine is basically going to be like a box top cover that will acuate up to a good height to walk around. Can you wire them up in a series?

@muntee33 3 месяца назад

Why not use an old jockey wheel (or jackstand) off a trailer. You know, the thing you wind down 5o support the hitch?

@mckenzieb1001 3 года назад

GRAHHH, I needed this a few weeks ago when building my elevator bed! I went for a much less graceful winch and pulley system. I'm just mad I didn't think of this myself :P

@RouteDelSol 3 года назад

Do it again, but better this time :)

@internettoughguy 2 года назад

Yeah, just be careful if your system needs to hold up a significant amount of weight. The way this DIY is set up all the load is supported axially by the wiper motor shaft...and those were never designed to take axial loads. There's no thrust bearing in those things. It's just a matter of time before it will destroy itself if there's any significant load on it. Just something to think about...ypu know for safety reasons. Your pulley system is probably safer.

@josemanuelquispemamani9672 3 года назад

Gracias x los subtítulos en español :'v

@RouteDelSol 3 года назад

De nada!

@AndrewDuncan-f5p 6 месяцев назад

why use screws to hold it together just weld the shaft direct to the motor

@beastscientist 8 месяцев назад

Hey can you confirm that which size of thread rod u are using

@ronb1071 Год назад

I've used windshield wiper motors for a gold hound spiral gold separate which separates the gold dust from the wet concentrates, and runs the water pump recycled water also.

@randallsemrau6911 Год назад

I'm really struggling here in the big city to keep this project down to the $$$ level you did. The cheapest I could find a wiper motor for is $20, which already puts me over budget. This is so discouraging.

@crispy63 3 года назад

Good work Joel. I enjoyed the actuator build. Look forward to seeing the finished table go up and down. Hope you are staying safe and that the van repairs are progressing. 👍🏻🇦🇺🇲🇽✌🏻💨

@RouteDelSol 3 года назад

Thanks Crispy! Appreciate you!

@jamesarchuleta4854 8 месяцев назад

Just a little suggestion , you could have achieved the same assembly by cross drilling the two pieces together as the finished set - up would be , and them adding a roll pin

@toyotaprius79 3 года назад

21 seconds per inch? For sure that's not gonna be popular in some markets 😂

@kschleic9053 3 года назад

That was the speed with a traditional threaded rod... The acme screw he switched to is much faster, since the screw pitch is better designed for this kind of thing.

@RouteDelSol 3 года назад

Yeah much faster with the ACME pitch as @ken_the_bigfoot said. But also sometimes slow and strong will work in a specific circumstance as opposed to quick. The good thing is that you can always exchange the motor for a faster unit and voila problem solved eg a drill motor or something cheap and readily available.

@BuenasRutasBuenaVida 3 года назад

Nice job Joel!!!...now show the array...jejeje

@RouteDelSol 3 года назад

Jajaja sooooon you are all gonna love it when I finally reveal it!

@toronado455 3 года назад

Just curious if a power window motor would work for this, or is that not as powerful as a wiper motor?

@RouteDelSol 3 года назад

I think it would... The strength comes more from the mechanics than the motor itself but I couldn't for sure tell you you might just have to try it for yourself

@edgardcortes3778 Год назад

Impresionante 😲 yesss y divertido útil y una gran terapia eres excelente amigo 👍

@carolinandreau 3 года назад

Hello! Joel good Sunday! 😃☀️ I missed the live chat 💬 but I did stop by and watched the video. Interesting 🤔 that one little tornillo make so much sense on the project. I’m can see how this table is going kudos to you.👍🏼👍🏼👍🏼👏🏼 I’m being silly now. Just don’t lose a tornillo it can drive you crazy 🤪 hehe! Jk take care! ✌🏼💛

@RouteDelSol 3 года назад

Hahhaa I'm gonna try keep my tornillos in order 🤪🙌 thank you

@julioh.camara1373 3 года назад

por cierto a un precio bastante bajo y lleno de ingenio excelente!!!

@RouteDelSol 3 года назад

Siiiiiii :)

@jonathanmelhuish4530 3 года назад

Much more interesting with the narration, I could understand what you were doing this time! Still struggling to understand why you're doing it and can't just lift your table up and down with your hands like the rest of us though ;) Sometimes low-tech is the best, as things inevitably break at the worst possible moment!

@RouteDelSol 3 года назад

Thanks for the feedback man! I had two different manual systems in there before and I thought that they were just not good enough. Very hard to operate, also this design allows for repair at any moment using the spare motors that I have and also if I am anywhere near a junkyard I can find some spare part very cheap and very easily. It will also actuate not very often so there's that on my side too!

@jonathanmelhuish4530 3 года назад

@@RouteDelSol My van just has a small table that you lift off the hook and move down to make the bed... little bit unwieldy but very simple and low-tech. Yours is definitely more fancy! I hope it works well for you :)

@RouteDelSol 3 года назад

@@jonathanmelhuish4530 I hope so too hahah! I could be setting myself in for disaster. I will have two tables in my van one will be manual and the other is this one so we will see which one works better.

@johnmichaels4330 3 года назад

Um.... because this is Hella cool..... is that really hard to understand?

@ashokvannarath5155 3 года назад

how did you reverse the motor direction without loss in torque. Please advice

@hulkgqnissanpatrol6121 2 года назад

Reverse positive and negative.

@johncosta5172 Месяц назад

Great project.

@RichardFortin77 2 года назад

Thank you for this video . . . I was thinking of building one and you saved me a lot of work !

@forme1981 3 года назад

I thought this is for the panels

@RouteDelSol 3 года назад

No for the interior but the panels will be soon!

@stopthephilosophicalzombie9017 3 года назад

@Route Del Sol I am trying to cook up a cheap actuator for a sewing machine foot pedal (for a double amputee) and I'm running in circles. Any ideas what type of actuator I need? Offhand I am thinking about adapting a cruise control actuator for this purpose. I think I'm going to have to MacGyver the shit out of it to get around the brain box.

@RouteDelSol 3 года назад

I think any small light duty linear-actuator should do the trick, using second hand or creating your own DIY would be the best. Have you thought instead, of using a potentiometer to replace the foot pedal all together. And just having a hand dial do all the work on top of the table?

@anthonyb5625 2 года назад

Top job! You could even possibly have a horizontal mount with a scissor lift for other applications but fair dinkum this was excellent. Muy bien. Trabajar excelente

@JasonCarmichael 3 года назад

I need a very long actuator, so I can tilt my 10-panel PV array from 76° to 28°

@RouteDelSol 3 года назад

I'm sure you could work something like that out using a method like this

@edwardowen8668 Год назад

Using actuators for an escape room prop and they are EXPENSIVE! This is a great build and just what we needed.

@kapulu6259 8 месяцев назад

That sounds cool. My sister owned an escape room location in Clarksville Tn. I made a box for her that required a magnet to unlock it. It was sweet.

@robertshirley2288 5 месяцев назад

Crush cans🤑🤑🤑

@deebee5236 3 года назад

I’m hoping to do something similar to raise the roof of my pop top camper. Need it to travel over 1m. This method may just work 😁

@claretotton8733 Год назад

We’re you able to do this? I’m looking at doing it to mine.

@kevinj9059 3 года назад

Did you grind a flat on the lead screw? You might get some slippage or strip off the grub screws otherwise.

@RouteDelSol 3 года назад

I cut a slot in both the shaft and the lead screw to prevent slipping but thanks for checking I appreciate all the suggestions. ☺️

@yaelRIOX-yy6qk 4 месяца назад

Quiero uno

@dodidaryono9086 Год назад

Bnyak omong

@darrelljacobjr2120 Месяц назад

At 4:00 when you are complaining about the slow speed, you have a cordless drill laying on the bench. Try using an old one for your motor. Much faster and still powerful as frak.

@mattjames8350 9 месяцев назад

time is money

@temirikov 3 года назад

Great work! How much it can lift (in kg) and what torgue has this motor?

@RouteDelSol 3 года назад

I am not sure of the answer of this. I have seen similar designs bend and warp thin steel tubes so that is a good indicator of lifting strength. And the torque well I haven't been able to stop the motor in its tracks yet so I think the nut would strip before the motor gave out. Pretty torquey hahah

@temirikov 3 года назад

@@RouteDelSol anyway thanks!

@Smashachu Год назад

Bro you learned to weld on a tig? That's like giving a kid their very first car and it's actually a manuel 18 wheeler 17 gears.

@abubakarwanngah6769 7 месяцев назад

Good job i like see teknikal projeck n strok power long 2ft n power up 50kg saport power n down..

@sixtopadilla3968 2 года назад

Isn't it funny this guy's talking about energy if you understand everything in that room that you can see and touch was made possible by petroleum he's getting paid Bookoo bucks for telling you that we don't need petroleum he's a bigger fool than the people that are believe him

@riftvalley1765 10 месяцев назад

Boring

@johnmichaels4330 3 года назад

Why didn't you use and automatic window linear actuator? I'm sure there's a good reason, just wondering.

@RouteDelSol 3 года назад

I don't have a good reason, I suppose the availability of something like that here in Mexico might be limited, most cars with automatic windows here use a 12v motor a bit smaller than the ones used in this video.

@johnmichaels4330 3 года назад

@@RouteDelSol make sense to me. It's a really cool project.

@julioh.camara1373 3 года назад

muy bien joel te felicito por tu idea y el como resuelves los retos de modificacion de tu furgo!!!!

@RouteDelSol 3 года назад

Gracias! :)

@joeabad5908 3 года назад

This is what I have been looking for.. Thanks for sharing

@RouteDelSol 3 года назад

Glad I could help

@smartassist9700 2 года назад

You DID NOT SHOW IT WORKING…..OR TESTING STRENGTH. WE HAVE ZERO IDEA WHAT IT EVEN LOOKS LIKE. PLEASE MAKE ANOTHER SLOW VIDEO REVIEW/SHOWING/TESTING…

@Videogame9559 2 года назад

Hi would like to make computer desk with adjustable hight as I wi,l have midi keyboard on it so I sand or sit at electric midi piano keyboard

@officialWWM Год назад

Er, I bought a great one on eBay for 50 bucks!

@mikem9953 Год назад

I’m looking to build an electric house door opener. My girlfriend is in a wheelchair and as you can imagine it’s very difficult for her to wheel up a ramp, open the screen door towards herself, roll forward a bit and open the house door to then finally enter, all while the screen door is trying to close on her. Any ideas would be greatly appreciated Thank you, Mike

2 года назад

Hello Joel: Great Content! I was wondering if you can help me. I need to find a new motor for my chair recliner/lift. It broke after a few uses because it was being launched against a wall. It wasn't under warranty and the seller just can't help me. I know this is very simple but, I can't seem to find which motor I need to buy. The motor is from China and they sell in bulk. I can send pics if needed. Please help - the chair is for my 80 yr old Dad and I'dd hate to waste his money and a new chair ($500). Also, I live in Puerto Rico and can't seem to find nobody to help. Thank you in advance.

@stevesnyder8638 Год назад

I saw the Oregon license plate in the background. Thats where I'm from. Stop by and say Hello on your journey.

@MikeUberquoi Год назад

Hey Mate, thakn's a lot for your video. I was wondering how could you make it as the motor stop itself at a point (down and up). Do you have any idea? Thank's

@paddyblack-exe Год назад

Very cool! Will be building a loft bed with actuators soon, and publishing the build on YT. Wish I'd seen this before I pulled the trigger on mine, but then I'd need a workshop for metal tools too!

@TheRealRamiroIbarra 2 года назад

great idea this is what if was looking for my moto truck coffee roof do you think It can lift 200 Pounds weight? by the way thanks

@rolystanley6855 10 месяцев назад

Nice conception & execution. Thinking of making a scissor brake mechanism to stop auto rotation of feathering Prop. Cheers!

@chancetolbert4852 Год назад

I'm looking to dothis exactly same thing for a hidden baby gate I made. But I want there to be pressure limit switches and automatic stops on each end

@juanluismaciasatilano4069 Год назад

Good work. buen trabajo, I was looking from different options for my hervicide machine I use on my tractor I looking for something cheaper instead of use hidraulic lifts on the spreader arms its manual so i m getting into some with linear actuator

@kapulu6259 8 месяцев назад

Maybe a TV stand or speakers that come down from the ceiling.

@jonathandaniel816 2 года назад

The idea is great but the way of shooting and clarifying was bad and thank you

@aventurix 3 года назад

Cuestan 30 euros y con mando inalambrico y relet.... En aliex....res

@inakigallego902 3 года назад

Bro in the more important parts of the video you put that forward speed and can't see anything of what you are doing. Even pausing it hundred times🧐

@kmarusina 2 года назад

Would it be possible to get the build schematics? I couldn't quite grasp the construction from the video

@makantahi3731 Год назад

very well but i need to have travel by azimuth over 180deg

@brianleach 2 года назад

Hi there love the video. Iam planning to build a raise bed in my campervan. Thanks for posting the video Brian.

@rojo3248 3 года назад

1:46 LOL I know that exact junkyard, it is located in Ensenada, Mexico! hahaha

@rifleman7313 2 года назад

Nice work, I was just wondering if the motors that you decided to use would be strong enough to lift 260lbs? For the project that I have in mind I would only need 6 or so inches of stroke to enable a workbench to lift/elevate 5 to 7 inches consistently from a lower powered 12V battery. Something like this could be used for an electronic dropper post for a bicycle if you could somehow make it smaller as most dropper posts are 100mm to 170mm of adjustment. Just a thought.

@Bluuri-Aeros 9 месяцев назад

"...I only need 6 inches of stroke..." That's what SHE said.

@paulsomeone9673 3 года назад

G'day mate from Perth W.A.

@RouteDelSol 3 года назад

G'day mate!

@chrislynde3969 Год назад

Glad I came across this gonna build a 12v mini excavator for my son

@ransomesmgmagic373 3 года назад

How do you synchronise the actuator operation or is that not an issue?

@RouteDelSol 3 года назад

I am currently using a potentiometer to adjust the speed of the actuator, but generally it is a non issue because of the freedom of movement with the way that the actuators are mounted to the table frame...

@ransomesmgmagic373 3 года назад

@@RouteDelSol Thank you.

@toronado455 3 года назад

This is your best video yet! ✅🆗🏆

@RouteDelSol 3 года назад

Thanks it's a little more informative

@_tronicum 3 года назад

awesome hack

@KrazeeKraftZ 2 года назад

Awesome, I'm thinking my Halloween props could be activated in this manner, hmm too many thoughts!! Thanks for the inspiration. Aussies rule, no matter where they are living 😂

@zoham6855 2 года назад

Awesome I’ll be building something similar for my elevation bed in my box truck build

@ggate01 3 года назад

Looks good buddy. Subscribed

@RouteDelSol 3 года назад

Thanks for the sub!

@WillieStubbs 2 года назад

When I visited Palabra de Vida Church in Ciudad Victoria, Mexico Don Krow showed me how he designed a way to open sliding windows near the roof of his sanctuary to keep the church cool. He had a rod that connected like 20 sliding windows together and used a hand crank to open or close all the windows at once on one side of the sanctuary and then he'd do the same to the other side. I'm building a home that with have sliding windows on the north side and want to use a linear actuator to open or close them all at once. Didn't think I could do it for $20 though.

@chipmeister111 2 года назад

Great Successa. Thanks for the inspiration.

@MrSasha3050 2 года назад

Interesting video, but toooo many bla bla bla

@xeedsenterprise505 2 года назад

You used the word ' mcgyver'...cool

@craiglangley1478 3 года назад

Could one connect all 4 wiper motors together to operate on same battery to operate in unison? I would imagine you would use 4 wiper motors that all operate at same speed.

@diyguy446 Год назад

Do you know how much force you get off of this

@albamontenegrouruguay 3 года назад

,🙋🇺🇾🇺🇾

@RouteDelSol 3 года назад

😁🙌

@markgordon8014 2 года назад

Mate u absolutel legend that's exactly wat I need

@benjaminbooth3566 7 месяцев назад

Grease the threaded rod 👍 cool build.

@samuel12345678922 3 года назад

I subscribe 😀👍

@RouteDelSol 3 года назад

Thanks :)

@sahadevanviswakarma6579 3 года назад

Can we use it for standing desk lift u p n& dn ?

@scallywagin 2 года назад

Awesome mate, you must miss Bunnings....

@toronado455 3 года назад

Nice Borat! 9:04

@RouteDelSol 3 года назад

Very nice 🤪

@agustinrodriguezrey9244 3 года назад

💪💪💪💪💪💪💪💪👽👽👽👽👽👽

@RouteDelSol 3 года назад

Arriba!!!!!🙌

@dougscott4008 Год назад

solar tracking for N/S tilt

@nattapon9503 3 года назад

Nice work!! How much Maximum load for this motor?

@amasalam 2 года назад

Is it too noisy, (like the one I did)

@gordbrown410 2 года назад

Cool!! I'm using a 24v motor with a 90degree gear reducer on it from a chair lift. I've made a cage with a 36"lawn roller in it to be towed. Just in front of the roller is an aerator that I can move up and down on a lead screw attached to the motor! I looked into buying an actuator, more fun and cheaper to build one!

@mariastanford5701 Год назад

how much load it can handle?

@rickpaull518 3 года назад

Hey mate , great video. I'm building a 3DOF motion sim cockpit. tried moving it with wiper motors but needs more juice, so was looking at actuators, This is a cracking idea. Cheers