Disclaimer: I forgot to wear antistatic gloves aswell as forgetting to remove the cloth on the table i was building on. Make sure to put your components on an antistatic surface to prevent any problems 👍
thats overkill. components wont die from static unless you are rubbing furry clothing over it 100 times on the circuit board. not hating just pointing out. ps. i build pc for a living
Yo, Thanks for telling me because lots of other people in the comments were just mentioning that it could do something to the parts, I appreciate the comment!
Good job! One of the nicest looking PC I’ve seen built by a young person like you. Keep it up and hope alot of people will find your built useful and give you more comments and like!
@@DaiveyFR in like 4 years when i finish school, i might have a chance cos right now my family is struggling financially and there is not really extra money so i can't really get a pc
Loosen the other 3 power supply screws slightly and it will shimmy a bit to allow you to put in the 4th screw. If it wont shimmy then loosen screws just a bit more and repeat if needed.
Hey, nice build, here are some things I wanna point out for your next build Close the MOBO Box, then unwrap mobo, put the wrapper on top of box then put mobo on top of cloth Kingston NV2 is the cheapest option, Crucial P3 is better, but just very significantly pricier Don't open CPU Bracket before unboxing cpu, something might accidentally bend the pins You could've got Radeon GPU, more price to performance. But it is your choice
Awesome video i just feel bad because from where you got all your parts they are way more expensive then if you got them from amazon or somewhere else.
tip: next time u build a pc, try not to put components on an electrostatic surface like a betsheet that may carry electrostatic charge use just a plain wood table
Are you sure the m.2 SSD is in the right place? If you installed it in the wrong slot, the GPU shares the lanes with the m.2 SSD and you only have 8 lanes instead of 16 for your graphics card. Download gpu-z and run the benchmark there, if the graphics card only shows 8 lanes, you know what's wrong
@@Phorics it's ok to install SSD in top slot as it uses pcie 4.0. GPU still utilises pcie 4.0 x16 as SSD is x4. Plenty of bandwidth left. This problem only affects gen 5 ssds
@@yuanzhu1073 Totally wrong. I have a 4.0 m.2 SSD myself and it simply stole 8 lanes from me because it was installed incorrectly. After looking at the manual, I installed it in the right slot. The graphics card had a full 16 lanes again and I was happy. I speak from experience.
@@UKRP_Martin12345run I tried to screw it in however it couldn’t stay put so left it, it was still pretty secure so i don’t think it will cause any problems 👍
Ik it's your first Build, but never ever, build a computer on top of something with cloth like you built it. It generates a lot of static, that kills your components, also the SSD is not correctly placed, the thermal paste should be on top of it, not below, this is for the heat to transfer to the heat sink. Don't wiggle the stuff, you can break pins Also, never ever spin the fans, you can damage the motor
I subbed please do another giveaway I can’t afford it and neither can my mom I have never had one and I really need one it can be 500 I don’t care anything please
nah, gpu works completely fine its just that higher end gpu's like that have a good enough heatsink that the fans only kick in at a certain temperature.