I built the MOST EXPENSIVE ENDER 3 

Thanks for the shout-out! I have since added parts for the thick old PSU and I am using it on my printer! I had the same problem with the t-nuts on one side but when the nut is rotated it fits on my printer

It wasn't just the printer upgrade that was amazing, the production quality of this video was on another level! The video was also genuinely entertaining! Loved the "great memories" montage :D

This is amazing! And your cinematography is spot on! I love how you did the off axis slow spin angled camera shots during the reveal of the completed printer. Really cool

The satisfaction of addressing all the challenges and overcoming all the challenges in such an ambitious DIY project will always hold more personal value than just buying something off the shelf. Also the production value and edit for this video came out great too. Not to mention making an Ender look that attractive is a feat all on its own. I'd say this project was 100% worth it.

Upvoted for the cardboard enclosure, seriously, that's all you need people, this guy gets it.

I didn't even know this was an option, very cool build, it came out beautiful, and the videography on display here is awesome!

Your video's are such a joy to watch. Thank you so much for producing and sharing them.

You clearly have engineering skills which got the build over the line. I could never attempt such a project! Thanks for the video which shows what is involved - a very accomplished result which looks amazing. 👍

Very nice work, Ctristof. Both the printer and the video. Clever, carefully produced, and entertaining. Thanks.

Seriously great build. Loved the story telling start to finish. Subbed!

Awesome video! Your cinematographic skills rock! The story is fluid and well delivered, scene chronology is excellent! And what to say about the final result! A performant, reliable and sexy machine. But most importantly, it is YOUR design! Congrats! I loved every single minute of your video. Keep it up!

Your panning time lapse shots while you were building the printer are awesome! I know they must have taken hours, so I wanted to make sure you know how great they turned out

I absolutely love your style of video and how much fun you're having.

this video is the reason i just started printing parts for my own enderwire upgrade! can't wait for the follow-up and further upgrades. great video :)

This is such an awesome video! Everything is so well done, it's really quite inspiring. Can't wait to see what you do next!

Man your work throughput is crazy! No idea how you find enough time to get through this many projects? Have a great Christmas and see you in 2023

Brilliant stuff, fantastic video production. I'm currently investigating doing some meaningful upgrades to my trusty old Ender 3 Pro and debating whether I should tackle a similar project (for the fun / educational side of it) or simply spend a bit more on a modern, fast 3D printer. Either way, it's incredibly inspiring seeing what the community has come up with. Long live tinkering!

Been looking for this video a couple of weeks now. Happy to find it again.

This was amazing to watch. Thank you for uploading it.

Such a great and inspiring video. Makes me really want to do it to my Ender 3v2! With the help of this video I know I can recreate what you did here, thank you!

This is such an amazing video! Great job on the printer too! looks so beautiful

This gives me an insane amount of motivation. I received my first ender 3 pro v2, and I know I have a long ways in the journey. There is still a lot I don't know but I'm trying. Thanks to the algorithm for showing me this channel, subbed!

It is easy to go down the rabbit hole, but you received enjoyment from the process and have a great looking machine in the end.

Awesome build! Love your editing of the videos, awesome content :)

Brilliant! Great video from start to finish well done.

My man is building his own 3d printer while i still stuggle to avoid my 100% infill prints to bend on my ender 3v2. Mad respect!

This was a random recommendation and I loved it, very nicely done!

Another great video. Just found you this last week. Very entertaining and informative...thank you so very much. Please keep it going.

This was the coolest video I’ve seen for 3D printing! It was fun to watch the journey and how you documented it. Subscribed. Awesome video man and I think this is something I’d like to attempt on my Ender 3 Pro I just picked up. 😊 Thank you for doing this!

Everything about this video is spot on! I would point out that for the price, you could have gotten pretty close to a Trident kit. As nice as the Switchwire is, getting to a core XY printer is a big jump in performance, IMHO. Getting away from a bed-slinger printer may mean that you can't reuse the Ender 3 parts, but overall, it will give a big jump up in performance. Obviously, this isn't a comment Christoph, but for someone reading the comments considering upgrading their Ender 3.

Great video and building, the unique printer you build is always priceless, enjoy the LDO Orbiter V2 extruder. Happy Holiday!

thoroughly enjoyed the video and the humor. thanks!

Great vid ! i built one of these a while back just cause i had so many enders laying around... totally not worth the cost for what you get. But like you had a blast sourcing and building it. The discord community was worth it alone imo. Mine sits on a shelf collecting dust now while i have a blast printing prints even twice as fast on my X1C carbon😁

21 seconds into the video and you answered my 2 main questions. Can't convey how nice that is. I then felt compelled to learn how any why you came to that conclusion. I recently purchased one of these from a buddy that already had a Micro Swiss NG head and linear rails. Aside from adding a RPi 3/4 to run something web based it seems like most of the other things you did ultimately have minimal return on investment. Perhaps I'll get the magnetic plate, PLA+ just glues to the glass plate.

WOW that is fantastic! Great job , very impressed

Converting it to klipper and later adding microswiss DD with SB front and doing the belted z conversion, and then it being such a great machine was such a rewarding experience. I learned a shit ton about 3d printers and gcode. I think i know how you feel

This is exactly where I am with my ender, I am trying to refresh it haha, great video!

Currently doing this conversion myself, while expensive and time consuming the satisfaction of building this machine is the best feeling. My E3P was also my first printer and I couldn’t justify just selling it so may as well up-cycle it and make it better than ever.

I was expecting you to have at least 300k sub based on the quality of the video. This is insane !

Im having a crap week, this here video was a welcome break, subscribed! Such a funny video

This is awesome. The video was done well and I laughed several times. I'm gonna check out your other stuff. :)

Very good looking build man! Nice work, first video if seen from you and you definitely gained a follower!

the whole video was a damn rollercoaster Loved it

I love the Intervention scene!

Wow amazing job man!

Your skill has no end this was a pleasure to watch

Nice video man, fun and interesting

Great video. Loved the ending.

I effin love your story telling =)

Just found your channel, awesome job on the ender.3 and the video editing, ya got mu sub

I love that this is a ender 3 and not a e pro.. well done! Working on my 3 pro conversion now and do agree the stealthburner is really bulky on the ender 3

Beautiful building footage!

I just post this here to be invited to the 1 million subscriber special: this bro is definitely going places. Not even interested in 3D printing before…now thinking about getting one.

I reinforced the 4040 extrusion which is as you know hollow inside. I used 8mm metal tuning with 5mm hole. Cut it and beveled the ends so that the m5X45 bolts goes through the tube and then does not allow the 4040 to collapse when tightened! This is by far the best thing I have done to my frames. As you know the bed runs on a single 4040 attached to a single 4040 I frame. This is very very poor especially if it is over tightened at anytime. Adding the tube prevents such event and absolutely give amazing rigidity. I hardly ever have to adjust my bed now and it stayed within .001 on all corners now. Obviously depends on the integrity of the x gantry, which I have dual 1204 ball screws on! Zero lash ZERO. The 800 steps seems to hit the magic numbers much more precisely, IMO. Great content you have , thanks for all you do.

I love how the Trex did yoga throughout the video. much love!

This is the most entertaining 3D printer videos i have watched excellent.

Earned you a sub, great video and effort. You should consider a build series for the future.

great vid thanks Christoph

Actually amazing sir! You should have more subscribers! :)

Really good content and high quality video editing.

This was a fun watch 😁

Great video! Excellent editing and content

Man this is the most honest video I've seen to date! Title's a bit click bait I'll honest but the video itself absolutely unexpected and fresh :) Keep it up. You've got my subscription :)

Thanks for the video, I've had a thermal runaway issue yesterday on my ender 3 pro stock but dual Z axis, still don't know what caused it but I just printed some stuff for an hour successfully with no issues today.

I'm wrapping up my v2 build with the stealthburner. I agree the stealthburner is kinda big. I'll probably revert it later on. Still it's a fun build. Definitely learned a lot by building an Ender wire.

Thank you for this video, I started making my conversion in 2021 when I was 16 to my cr 10s into a Voron switch wire and the problem is that no one really made a nice project like this one’s for the ender 3 for the cr 10 (I dont know now I am talking about 2 years ago haha) so I decided to start modelling the parts to make it how I wanted it obv inspiring by other ender 3 project and after some months I did and I loved the results but then I was too lazy to print the last parts and make a GitHub page with all info and file but now you gave me back the enthusiasm to finish this infinte projects ahah

I'm certainly not upgrading any Ender 3 machines, but man that was an entertaining video! Subbed. Keep up the good work & continue eating oreos at the speed of light

Oh wow, I was admiring this printer yesterday when assigning serial number 😀And look what RU-vid served me today It's an awesome build, gratz!

Awesome video. I ended up going the other rout you did and clapping mine out with a sprite pro and dual z axis.

This was a whole ass movie. Vid deserves even more views.

Respect to you Sir Maker! Great work! I know it's quite allot of cash, but this printer looks better than most! And it's made by you. I will try to make one, I already have most of the parts, but I'm just learning fusion and it's a pain in the infill.

Great vid. As someone relatively new to 3d printing, and having just acquired an ender 3 as my gateway drug into this addiction, i can relate to the psychological factors involved in my desire to upgrade this thing! Not sure i'll go as far as this video, but i feel fully justified in my desire to do the mods i have in mind. Tinkering might be unnecessary with the newer machines on the block, but a part of me kind enjoys the process of maximising what i have!

Great video! I've been thinking about upgrading my ender 3 v2 slightly to get it printing at 100mms at a decent quality

This is simply amazing!

The video is really good and well made, the maschine makes no sense at all cost and features wise. Very entertaining :)

WHAT IS THE DINO DOING ??? Awesome video !

Now that is an extreme upgrade. Excellent. I am also currently rebuilding my Ender 3 but I just want it to churn out reliable prints so I can move on to start my Corexy build.

wow the for mat of and quality of the vid was awesome you should have more subs than 5k best of luck in 2023

just discovered your channel. hope youre doing well. was hoping there was a part 2 to this video.

i already saw this video 4 times.. And i still come here to watch everything again and again and again ...

Very impressive and very entertaining👍👍👍

Sexy build, that toolhead shroud tho... Might steal it for my stock ender!

This is very creative. Thank you. Made my day.

nice work, this reminded me when I convert my Ender6 to a VzBot.

Great video!

That is an awesome video! I am also debating between building enderwire or just buying something like p1p and selling my ender3 to friends. I will build a voron 0.1 this month and will decide after that :)

Is nobody going to talk about how the flexi t-rex is in different poses every time the camera goes back to him in the therapy session part of the video?

01:26 Hey, I know that guy....! Thanks for the shoutout ;) GREAT video, very humorous... you're going to grow like crazy, I can tell :)

Totally worth the money, as a project very interesting.

This is the first time I have seen you and may never watch another video, but I am subscribing because your funny.

amazing video mate keep it up

Looks great, always fun to re-engineer something into a beast. Those first much faster prints feel rewarding. Pretty sure I beat you on expense for an Ender 3 though, only thing stock now is the frame :/ 5 linear rails, IDEX direct drive, dual Z side lift belts, Octopus, AC heated cast aluminum bed etc. Has 10 micron Z resolution with microstepping disabled using a 20:1 reduction on Z. I designed it during lockdown and built it last year, every part printed was my own design including the compact DD's. It felt really good to get it up and runninng and tuned, Klipper is amazing. One last thing I may do is ditching the old style V6 hotends and putting on a pair of Dragon UHF, sick of fighting nozzle changes. That's what is fun about open source products, grab the CAD file and go nuts. Make something your own.

sehr gut, da krieg ich direkt Lust drauf meinen alten ender3 umzubauen

This is insane - earned a subcriber

this was well made sir

Holly, this is so awesome, my respect for this great video and the great build conversion for the ender 3, I have one too that is like my baby, purchased on 2019 and still rocking, recently I purchased a skr e3 v3 but have not install it yet, I want to use klipper with it, I want to be able to print higher temperatures material for print automotive parts, what kind of upgrade can you recommend me and if is possible to use the same fanducts that you used and same extruder without all the others parts conversion? Another question is have you done multicolor prints on yours by simply changing filament color? Just curious about if would be possible by using the bltouch

Love this vid! i subbed and liked :)

Great topic, thanks for it, 👍

That is some quality content right here!

Great Video!!