I don't have a problem... LEGO VLOG 

Favorite quote of the video "I'm going to go push him over." Love it!! 🤣

I like the under city cabinets, they look clean & are very necessary. Always enjoy seeing your "creatures" ❤😂

You don’t necessarily have to butcher a baseplate for the front of your drawers, Walmart sell these self-adhesive rubber strips by a company called Mayka. They’re Lego compatible and come in 2x 4x and I think 6x, and can be cut to size just with scissors. The clutch power is not as strong as actual Lego because its a soft rubber but it’s sufficient. I’ve also removed it without leaving residue behind, might be worth looking into. PS all 5 of your ‘creatures’ are too cute haha

I wouldn't throw the road plates away I'd donate to school or youth center something like that. Great job on the organization. Keep it up bricksie

IKEA furniture is harder to put together than almost everything good job 😂

I had a cabinet once that I wanted more shelves in, so I drilled the holes inside myself and got some more of the little plastic or metal shelf bracket holders for them. You just don't drill all the way through to the outside. You could put some kind of guard on your drill to stop it from going all the way through. You could put tape around the bit so you know when to stop. Or use a larger washer or nut to hold in place that will stop the drill bit from going too far. Then cut your own shelf to put in there on the extra holders you buy.

I use my old road plates for mils, replace bricks with plates to link corners, works perfectly

About the air purifier, I ended up buying one after that video back when you bought yours. I dunno if all models work similar, but on the specifications of mine it says it must be placed on the open in order to work, so there must be a gap of about 30cm on either sides, including top. Maybe a nice spot to place yours is close to the bottom of the stairs, where most of the dust come from to invade your room. 😉 About those huge number of crossing baseplates (thanks Lego for not making packs with straight roads only), maybe you could use them as bases for MILS-plates for roads themselves.

Hey Jordan that ocean water looks amazing! Since you’ve redone it that’s my favourite part of your layout. About those table legs under it though. I agree they wouldn’t look good moving them to the outside of the 2x6 frame, but what if you moved them further back so the front of each leg was flush with the front of your Billy shelf to the left of it (or maybe even further back than that). The table should be plenty strong enough to handle the overhang as long as you’re not jumping on it. It would provide ample space for a storage cabinet and in future an unobstructed view of the under water scene

Come for the Legos stay for the babies and pets. Ben doing his little butt bounces ❤

If you ever want to ad shelves, take a strip of cut down piece of pegboard and place it where you want shelves and drill holes. Works great. Oh and use the corners of your plates that don't sell for those drawers. Thanks for the content!

Pure satisfaction to see everything’s sorted where it suppose to be, and those different sizes plastics bags in order. What a productive day! Hope to see you sort those legos you mentioned before 😂

Bricksie- with the 4 intersection road plates, you can actually use them for mils plates. You just need to make sure you use 16x16 plates for the top plate.

Your lego room is my dream!

It’s videos like this that make me feel better about my $60-$100 part orders I occasionally have made. Just seeing all the parts & bags from previous orders at 16:21 & 19:52 is just entertaining. I think I have a problem overspending on this stuff, & then I see stuff like this.

I like the way you start with “got to build units to empty hoard room to house baby” and by the end its “got all the stuff of my desk” and baby still sleeps amongst the lego

I would love those old road tiles been looking for these for a while

Suggestion for the excess road plates and the drawer plates. You could cut off each corner of those intersections, and each plate would give you four studded squares to show the drawer contents with! Win win!

When the city is 'completed' you should do a train POV - both the ground level and elevated ones. It'll be great to get a tour from the minifigs perspective. Looking forward to that!

You could use the old road plates as mills for brick built road conversion or cut the studs off your road plates for your drawers.

Maybe you can use all those road plates on a wall in your office. Kind of like wallpaper, with studs for notes, reminders, to-do list etc. 😂. Best part of the Vlog…. The babies! 💕🥰

Cut off the corners of those old road plates to make the label thing for the cabinet

What a productive vlog. Way to go Jordan. And the babies are looking so cute. Hey Mrs Bricksie, nice to see her.❤

its nice seeing Jose here and here in the videos . she is doing a great job with the adorable baby's 🥰you both are great parents ❤and ps bricksie don't push Ben over LOL 🤣

Great city I enjoy all your videos. The 4x4 legs would look great cover with legos like your center piece. Because the wood leg stand out plane wood.

I'm scared to see your lego city finished cause I probably no longer see you make awesome update and good building, your skills involved a long with your city and I'm amazed by that😢 I don't wanna see the finish line . Love you Bricksie😊

Under the tables now looks great - a lot better imo

To label the Alex closets you can take the square parts of the road base Plate. Then you re-use them and you dont have to cut Nice base plates.

Hey mate, maybe instead of cronstantly moving skirting you could get some wood stain from the hardware store that matches the table legs and paint the supports underneath to look the same. Would be darker colour that doesn't catch your eye as much. Black tape or paint on the edge of the table tops could be an option too. Keep up the good work.

Man that’s awesome! Your organization has made my inner organizing demon happy lol

I want them those Crossroads would be very helpful for my layout

For the small spacey cabinet, you could move the legs to be located behind the larger cabinet you wanted there

I wish i was as lucky as you with all that lego its 100% a goal for when i live on my own to have a lego dedicated room

Hi Biicksie. This is the first time I’ve ever commented on a RU-vid video. I had an idea. Cut the corners off the road base plates and use them on your drawer faces. We love your channel and drool over your amazing collection.

You can cut out the corners of the road plates for the drawers.

Instead of skirting have you ever consider wrapping all your support legs with Lego to match you support beam for basement? or possibly even the grey texture or masonry brick that’s throughout your city? It would give it a complete Lego built feel looking from a distance

I bet you could add peg holes to add more shelves to those units.

If you are going to cut plates for the draws use the corners off the road plates you can't get rid of.

I like the air purifier, I need one like that. You could pretend it's a futuristic generator for the cities power

Use the corners of the road baseplates, the bit with studs and put them on front of the drawers

You could use your old road plates to build a full size airport... one day when you have the space :)

you can always drill more holes to add more shelves or adjust the height better

I work at a science museum called Imagination station we could use the road plates

The under table storage is a great use of space. Could run a double row of the cabinets behind the new ones for more

I know you were sorta kidding when you mentioned it but I'm into it...sell all your sets to focus entirely on the Lego City. It would help you finance your warehouse idea so you can go nuts with the Lego City! 😆🤩🥳

“I’m gunna go push him over” 😂😂😂 I died

Use the crossroad baseplates to make a MILS plate. Build the structure upside down and press the base plate on it.

Keep up the great work Jordan...love it! Is there any update on the new space? Cheers dude.

Great work man, ❤!

Im getting the pax unit with kompliment drawers. What should i get for sorting lego by type? Id prefer if it was some kind of sorting tray. I dont know how big the individual slots would have to be.

Use the 4 way road plates for mils plates

I’m currently working on a very large LOTR art. Was just going to work off baseplates for now, but do you think I should switch to the art pieces? It’s going to be at least 200x200 studs. Also using 1x1 plate. Think I might be a little crazy haha

Use those unused road baseplate (cut them) for drawers like separation 😂

Hey how about cutting the corners from the road plates the glue on the front of the drawers

i would take those road plates

I'll happily take all those street plates

I'll take those road plates. I'm starting my city city this summer

Were did you put your lego Burrow

Get your drill out and customize the mounting locations for the shelves. I think it's great when you say things will ever be "done". We all know this will never be completed as it will always morph into something bigger and better. It's why we watch the videos. Keep up the great content!

you can turn the roads into MILS just not in the center

I want those plates

More storage under the city like the cabinets is a great idea. I wouldn’t do anything to restrict access like a skirt. I would remove the 2 legs under the beach and sit the table on the cabinet

I want a whole series of "Jose changes something" in the lego city and then you have to figure out what it was lol Maybe a way she can participate in the buildings, since she had great ideas before, and give her a break

You definitely don't have a problem Jordan 😂. It's totally fine though. Tell you what, IKEA furniture is 10x harder to put together then some of the technique sets out there. Loving the new storage.

You can make a love-ride in the amusement park or something, with the hearts😅 or maybe a valentine market or something

I’ll take the road plates!!!!!!!!!!!!!!!!!!

Yoo I want those baseplates!!

Hi! I don't think you need to skirt the tables, but what if you painted the table legs white?

Hi there, as for the skirting, I have a lego city too (hence my youtube), and I use "skirting" on my city which is way smaller than yours. But BLACK twin sheets do a wonderful job as skirting. I can send pictures if you need ideas.....Also you can still plan them so that you can still get underneath...PS. If youde like to get rid of those old road plates, ide be glad to take them off your hands.... :)

So what’s the plan of next projects after u finish the city? honestly these are my favorite vids you make. Are you gonna make a new city perhaps?

You should really put some of the cheaper LED lights under the raised platform to light up the train station.

You should make art of the buildings in the city with the 1x1 round studs/tiles

When are u going to detail your beach

Hi Bricksie I am wondering if you could leave a link to the old road plates in the description. (: thanks

In terms of the visual scene of the city, I think that the colorful pillar really takes away from it even tho I like it. Maybe you could use a different color?

Build it and they will come!!

Hey, when are you moving to your new lego studio office?

I want those baseplates!!!!!!

"I'm gonna push him over" Bricksie 2 seconds later :I'm a great father😂

You got a lot of bricks !! 👍and a nice family 👏 !! D. 

You need a scooter seat to slide yourself around under the table.

Soft skirting 👍

Question for bricksie Thoughts on the new PAB cardboard boxes replacing the cups?

The kids are so gorgeous ❤

Ill take your extras, I am new back into Lego grew up in the 90s early 2000s

bricksie i will 100 percent take those baseplates

Have you ever considered a creeper (the things mechanics use to roll under cars layin down) who knows maybe its a easier solution than too crawling under the tables

I’m interested in the road plates. Can you send me a link?

i would buy the road plates but seeing as i live in the Netherlands that's a bit hard

Maybe you could donate the plates that you couldn't sell to an area kid's school or a church organization. I would imagine that schools (pre-schools, pre-K's, etc) might need items like that for play time, breaks and, even though there are not a lot of studs on each plate, there would still be area enough for young kids to make small creations. Otherwise - do you have recycling in Canada (sorry if it's a dumb question). Maybe they could see a new life as a hairbrush or deodorant stick container, etc. LOVE seeing your organizing solutions though - inspires me to make changes and become more efficient in my own storage solutions.

I really wish I had so many old road plates for free, even if most of them were intersections...

7:50 I got a bit confused, as here in the UK, mothers day was in march!!

IKEA lego blew my mind

this man builds lego sets everyday, he can put together a cabinet

Maybe get a sled like mechanics use to roll around under your table more easily

Maybe you should get some soft foam mats under the city, gotta look after your knees mate!

You can paint the wood white

Just use the Lego stick on patch for example parts

“I’m gonna go push him over”😂

Instead of cutting up a Lego baseplate, you should use Lego tape! It's off-brand lego-compatible rubber tape that you can just stick on and you won't have to cut up a baseplate 😢😮