No video :(

I Finally Found The Best Undercoating On The Market... Blaster Surface Shield

Подписаться 166 тыс.

Просмотров 1,3 млн

50% 1

In this video I reveal my 7 month testing of the best undercoating product on the market in my opinion. Blaster Surface Shield Undercoating. I have been using this product in beta testing for over 7 months now even though it has only publicly launched about a month ago. The Surface Shield Undercoating is a lanolin based undercoating product just like Fluid Film or Woolwax. The main difference between Surface Shield and it's competitors is it's ability to both penetrate pinch welds and resist high pressure water wash off. In my experience testing over 30 different products over 2.5 years you only get one or the other. The product will creep and penetrate the pinch welds or resist wash off. This is literally the first product that I've found that will do both.
EDIT 11/3/22: Going forward the newer production Surface Shield aerosol cans will have a female top just like the other products on the market. I've had good success using this inner cavity hose on the aerosol cans: amzn.to/3T8gmVZ
Links to the products featured in this video:
Surface Shield Aerosol:
Surface Shield Gallon
Surface Shield 5 Gallon
Inner cavity adapter: amzn.to/3T8gmVZ
Spray Can Adapters (needed for older production male tops: amzn.to/3x0A9LQ
Bulk Spray Gun for Gallons: amzn.to/3iDs5M5
My Amazon Store: www.amazon.com/shop/repairgeek
Help support the channel, buy using my Amazon links
As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
Questions? Shoot me an email at repairgeek365@gmail.com
#SurfaceShield #FluidFilm #Woolwax
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user Repair Geek makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Repair Geek shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Repair Geek and therefore, Repair Geek does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Repair Geek or anyone affiliated with Repair Geek, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Опубликовано:

17 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@RepairGeek 2 года назад

Edit 11/4/22: Going forward Surface Shield will have female tops on the cans. I showed that the cans had male tops in this video. That has been changed and the female cans are working their way into the market. Surface Shield Aerosol: amzn.to/3BeckCm Surface Shield Bulk Gallon: amzn.to/2YpscVq Surface Shield Bulk 5 Gallon: amzn.to/30rrrvK Spray Can Adapters: amzn.to/3x0A9LQ INNER CAVITY SOLUTION FOR SS: amzn.to/2ZVDPnq (This will allow you to adapt the male can to the male inner cavity tool. Only required on older cans!) Woolwax/FF inner cavity sprayer: amzn.to/3T8gmVZ Bulk Spray Gun for Gallons: amzn.to/3iDs5M5 My Amazon Store: www.amazon.com/shop/repairgeek Help support the channel, buy using my Amazon links As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.

@bobjohnson8206 2 года назад

Thank you for posting the amazon link for the product, I just ordered it.

@Sound_The_War-Cry 2 года назад

Neighbor just painted everything under his car with a oil based rustoleum black paint. I never heard of anyone doing this. Was this a good or bad idea?

@bobjohnson8206 2 года назад

@@Sound_The_War-Cry In my opinion time will tell, it's better than nothing and it all depends on how it was applied. I myself i would have applied surface shield, never tried that and again you are right never heard of anyone doing that either.

@RepairGeek 2 года назад

@@Sound_The_War-Cry Bad idea. Paint does not displace moisture. So any moisture that was on the surface or in the pores of the metal/rust are just sealed in by the paint. This is also the same reason why traditional undercoating fails. It seals in moisture. Also any chips in the paint will let moisture in as well. Lanolin will displace moisture and create a barrier between the oxygen and the metal so it can't rust. I don't care who makes the Lanolin product they all function better than paint or rubberized undercoatings but need re-applied every year.

@DC-ke8qp 2 года назад

Can you spray fluid film over rubberized coating? I sprayed my new vehicle with some rattle can rubberized undercoating. I just found out about how bad the rubberized stuff is. So is it OK for me to go over the rubberized coating with some oil based undercoating? Or what should I do?

@v8consumption 3 года назад

This guy has a ford shirt so you know he's got a lifelong experience with repairing vehicles. I'd take him very serious

@Rick_Kn 2 года назад

😂🤣😂🤣

@frenchonion4595 2 года назад

LMAO

@Reddylion 2 года назад

Lol what if someone is wearing a Chevy shirt... does that mean he or she is 💩🤣

@johnberry2877 2 года назад

Absolutely! Like a GM owner testing walking shoes !!

@graveyardrumblers 2 года назад

As a 1998 F150 driver from western PA... You're not wrong 😆

@frostyjim2633 6 месяцев назад

I found the best rust preventative for me was moving from OH to AZ

@RandomAxeOfKindness 24 дня назад

I'd rather rust in Ohio, and I'm not a fan of Ohio.

@weebig 14 дней назад

I'm about to try a similar approach, drive to Texas from New York. I think it's in my trucks best interests.

@mazepa-slavaukrayini932 14 дней назад

@@frostyjim2633 good luck with the rats and scorpions…. This and many other reasons why that part of the country remain pretty much uninhabited for centuries..

@jeffreykbevins7116 2 года назад

I have used other Blaster products over the years and they have done great for me, so this will be another one of there products that I will be using . Thanks for taking the time to explain the Surface Shield to us and where and how that you have tested it and how well that you like it . I subscribed to your channel and I will be looking for more of your videos. So be careful and stay safe and keep on testing stuff for us. As always, Jeffrey !!!

@ralphchristopherson782 11 месяцев назад

I did purchase Surface Shield for my FJ that always has surface rust. It does work and I have to thank you for steering me in the right direction! ❤

@BlasterProducts 3 года назад

Thanks Andrew! We are working hard to get placement for the 1 and 5 gallon size options and will provide an update as soon as we have one. Thanks!

@rogerb6611 3 года назад

Will this be available in Canada?

@BlasterProducts 3 года назад

@@rogerb6611 It's something we are working on as well!

@GTkyle 3 года назад

I was just about to ask about 5 gallon buckets. If it hold up better I'm willing to switch from the NAS fluid film ive been using.

@bennyb6071 3 года назад

we need this in Ontario Canada

@apuckett1971 3 года назад

Great video as always. Pb Blaster couldn't have picked a better spokesman. Being from Ohio I've always choose PB Blaster products. Can't wait for it to come in 5 gallon. They should partner with Eastwood or Summit. I get my packages from summit next day. It saves me a trip to Akron.

@poqbum 2 года назад

Always love some good, truthful, analysis on products. Thanks for posting

@Arizona9001 Год назад

Bro your long drawn out test are top tier. Going beyond what others would do. Thank you so much.

@crhutchinson7769 2 года назад

hello, watched you for the first time today and i am very thankful for your video. i have a 2003 toyota 4runner that recently went through PA. inspection and corrosion damage was found on my frame. i will be having a professional welding shop do the repairs but i was somewhat desperate to find a product that will protect the most favorite vehicle i have ever owned. your attention to detail as you test and observe the products has won me over to the blaster surface shield. i will be ordering several cans and do the work myself in the near future. thank you very much and you now have a new sub.

@GromBeardo 3 года назад

NE Ohio absolutely kills our vehicles! This product looks unbelievable! I'm sold! Awesome being from a local company like Blaster! Now I just need to get through all this Fluid Film I have around the shop, ha, ha.

@matticusmac6452 3 года назад

Tk for this, always good to keep on top of this stuff. Competition is king!

@UNUSUALUSERNAME220 2 года назад

I started watching your videos because I heard you mention lanolin as an undercoat. The reason it interested me was because I am an industrial machine mechanic, I work in alot of different environments from high to low temp. and different percentages of humidity. I began using a tool bag several years ago and my Dad told me that if I was going to be working in all these different environments that I should thin coat my stuff with lanolin to prevent everything from rusting. That was thirty years ago, my Dad is gone but every tool I owned from that time is still rust free. I still have guys ask me when they see me loading up my tools what am I using and I tell them lanolin. I use mineral spirits to clean and lanolin to protect. Then I usually have to have the WD-40 argument with them. I have seen machines get destroyed because these guys grow up thinking WD-40 does it all, it does not. Anyway, you gave me some justification for my seemingly anal aversion to WD-40 and my belief in lanolin. You have useful info and your presentation is concise and interesting! Great stuff!

@jeffrobodine8579 Год назад

WD 40 frees things up immediately but attracts moisture in the long term. WD-40 is obsolete in my opinion.

@GregHuston Год назад

@@jeffrobodine8579 WD-40, literally means "Water Displacement 40th attempt" I have never heard anyone state it attracts moisture. It's a poor penetrating lube IMO compared to KROIL or PB even.

@SergeantExtreme Год назад

@@GregHuston Is this a joke? Project Farm's testing shows that PB is one of the absolute worst penetrating fluids on the entire market. Even WD-40 beat PB as a penetrating fluid.

@GregHuston Год назад

@@SergeantExtreme Not a Joke, WD-40 does NOT attract Moisture it Displaces Water! How's that a Joke? KROIL is the absolute best I don't care what some guy on a farm shows and PB is a penetrating lube, WD-40 is NOT, WD40 the brand does sell a specialty WD-40 branded penetrating lube but is not the traditional WD-40.

@SergeantExtreme Год назад

@@GregHuston Ha ha ha! 🤣🤣🤣 You are fanboying so hard it's both sad and pathetic. Project Farm did unbiased, scientific testing. The only thing you have to back your extremely ignorant comment is "muh opinion" which is quite worthless, might I point out.

@moonagedaydream6259 2 года назад

Liked and subbed, you did a great job young man, very focused and you seem completely unbiased. Good job, the US needs more young people like you!

@Nellis202 8 месяцев назад

How great this country might be with such young men. But the girls today all want that ‘bad boy’. That’s why we’re quickly becoming a third world country, and probably even worse.

@CDX825 2 года назад

As a fellow Ohioan you have certainly made it a lot easier for me to pick an undercoating. Greatly appreciate all your testing!

@blitz-n-chipz361 2 года назад

I love Ohio and I even like our winters but absolutely hate how fast vehicles get destroyed in the winter. Makes any bolts on the underside a PITA too

@mobilecommunicationsnetwor5268 3 года назад

Appreciate the effort you put into this research.

@jd0316 2 года назад

Glad I found this, was going to buy FF today. Used your link for Amazon and bought a case. My Jeep will give it a great test, I see dirt roads daily and high salt spray areas.

@wincertactical1317 Год назад

Thank you for your evaluation of this product. I also live in Streetsboro Ohio not far from you and own a 2011 2500HD Silverado. She had been partially oils sprayed in the past but after multiple car washes its all getting washed away leaving a rusty frame. This product just might be what I need.

@ex-engineer6657 2 года назад

RU-vid sent this to my home page, so you are working the algorythm well. I hope this product is great, as you do. Thanks for sharing your work. A confession; I admire your work bench, but mostly the vise.

@privatedata665 2 года назад

Blaster Surface Shield Home Made Extension Sprayer for $5 : Needed items 3/16 copper or steel tubing , 3/16 drill bit,4 ft of clear flexible rubber tubing and a little JB weld . Remove the spray nozzle from the blaster can . Carefully drill out the black spray orfice with a 3/16 drill, drill out just the black part . Take 3 inches of the copper tubing , chamfer debur the end , apply JB to the outside of the tubing and press it into the spray nozzle where you drill it out . Add the 4 feet of clear tubing to the copper tubing and you are done . Worked great for me . I took it one step further and heated the end of the clear tubing and pressed it together in a vise to plug/close it off & then drill about 30 tiny holes in the length of the tubing at different spots and angles and this thing sprays Surface shield in all directions very well . This does not take long and works well inside rocker panels , the frame and other cavities .

@JB-fn7ky 2 года назад

PD, great narrative Need to make a vid of this!

@technicalitems731 Год назад

thanks for info. if you get a chance, please make a video, upload to youtube and post it here

@northwesttoyotas509 Год назад

This channel is my new favorite!! Been geeking out for like three days now on your content!! 😂

@peoriavideosltd6822 Год назад

Good news; I just received four cans of Surface Shield I ordered from Home Depot, and they are not the male-type sprayer like the one you showed in the video. They are the familiar female-type can and should work perfectly with the sprayer adapter with hose. Hopefully the weather warms up this weekend and I can give my cans some thorough testing!

@johnmartin5153 Год назад

Sweeeet !

@tellitallnow3914 Год назад

Did the spray extension work?

@blahber222 9 месяцев назад

where did u get the extension wand??

@EngineeringGoneWrong 3 года назад

Been using krown for 6 years on my 2005 silverado with 200k miles. Very minimal rust. The reality is, any of these products make a massive difference compared to the do nothing solution. Also, a spring time undercarriage wash to get salt off is essential.

@josephphillips865 3 года назад

I wish I knew this years ago. My 04 Silverado had a very small amount of rust and now the rockers are pretty much gone after a handful of winters.

@vfr800ification 2 года назад

I do an undercarriage wash after every snow storm. Helps a lot!

@JimmyDoresHairDye 2 года назад

@@vfr800ification I do this too - I have a pressure washer and an attachment that rolls on the ground and sprays four jets right up under the car. I use a mix of dish soap and Salt Away to remove dirt and salt. However, is it better to wash the chassis frequently or give it a coating and leave it?

@rayleblanc7209 2 года назад

@@JimmyDoresHairDye A bidet for cars.

@nmt2893 Год назад

@@JimmyDoresHairDye How do you do that in winter when it's below freezing? Aren't you just coating car and driveway with ice?

@patriot1182 2 года назад

I just used 2 cases to do a 2019 GMC 4 door utility bed and i love the way it looks! It smells way better than fluid film also! This is the best you are right!

@kennethmilus1533 2 года назад

Im a true blue pb blaster user and fan. Ive had pipes that i had a 3 ft pipe wrench on and couldnt budge unless i broke it. So i got my trusted pb blaster and sprayed the fitting and pipe , went to lunch. 1 hr later went back and got ready to bow down on wrench and came apart like i heated it with torch. Ill always use it. Best ever

@steveo3156 2 года назад

Great work !!! This has been very helpful picking a product that will work well in the "salt belt" of PA.

@jswap1 3 года назад

Thanks for this video. I've been using the CRC Heavy Duty Corrosion Inhibitor (because of your previous videos), but this will probably be a little better and cheaper once it's available in bulk.

@CampedToDeath 2 года назад

Thanks for this video. I'm bringing a rust free truck home to Akron and I've been looking for a DIY rustproofing to put on it before winter. The salt here in Akron is brutal.

@ellenjak 2 года назад

I just placed an order for 6 cans of Surface Shield, the pack of two spray can handle adapters, the wool wax cavity hose/wand, and the package of the male-to-male spray can converter caps. I can't wait to try this. I had my 2015 Silverado coated twice since November 2020 with Fluid Film. but the shop where it was done closed so now I need to touch my truck up myself. I hope that Fluid Film and Surface Shield are compatible.

@JayTdub13 3 года назад

Wow, I didn’t see this coming. I’ll check it out when it comes in a 5 gallon bucket. This is actually exciting.

@williamarden5441 2 года назад

We used fluid film products in the Navy on F/A-18 aircraft. They also have some coffee called CPC types, 2, and 3. That stuff is amazing

@mattfleming86 2 года назад

So-sure?

@JohnHoranzy Год назад

Coast Guard aircraft also.

@HOMEWORK4.0 Год назад

Greeting from your neighbor 30 minutes north in Cleveland!! Totally agree with you! Thanks for the info and glad to see these products in action especially from all the salt we endure!!! I fliud flim my truck every other year and it is fantastic!

@brentbarnhart5827 Год назад

Been watching your videos the last few days. CANTON OHIO here! (Great job by the way) Glad we are neighbors.

@k87upkid 2 года назад

Just applied this from the gallon bucket that's a friend picked up and had more than he needed. Only took about a quart to do a Kia Sedona. Went on great. I was worried about it's resilience to road spray and under carriage washes but your demonstration on your truck really puts my mind at ease on that front. Looking forward to seeing how it works.

@a1inMil-Experience Год назад

Appreciate if you could update your status now, how rust protected as present? Thanks in advance

@orion3267 3 года назад

You could always do the drivers side in Blaster and the passenger side with the remaining products you have. That way it could be done and in use by the time winter rolls around.

@DoesItTho Год назад

Wow, informative, concise and well presented. Kudos and thank you!

@TheTotalThomCars 2 года назад

Dude! You're 30 minutes south of me! Thanks so much for making this video-I've been looking for something like this!

@bbrown5887 2 года назад

Great video. I recently used their silicone spray for maintenance on an Arizona residence that gets the brunt of heat, dust etc. Various door hinges, locks, blinds, window and patio door tracks etc. I had another brand but I liked the Blaster product better as it worked very well. Cautious optimism this workes just as well.

@twofortyz1719 2 года назад

Great vid. I am a heavy fluid film user. I live in the northeast. I literally use it on everything. The one thing I have to say about your pressure wash test is that the fluid film removes your factory undercoat. So technically the fluid film isn’t on the metal. Take that part of your frame and split it between the two. IMO I’m all about yearly applications Mainly because I do it myself. Keep the vids coming.

@SergeantExtreme Год назад

Yeah, even if the product "claims" that it would last two years, I would never apply it anything less than annually.

@barkzai2000 5 месяцев назад

Do you wash your undercarriage at all throughout the year or in the winter to rinse the salt off ? Or do you just apply the fluid film and not wash it until your next application?

@randomgraham4302 2 года назад

So glad I discovered your channel, I’m getting ready to do body work on my 97 accord and debating betweeen fluid film and PB’s surface shield. Just subscribed to your channel.

@jasonmayne1 Год назад

Just bought a 2022 Kubota L2501 and want it to stay nice forever- ordered 4 cans from HD just now. Thank you for doing the research and testing! Helped me decide what to do. Jason

@ronedelenbos272 Год назад

I'd love to see a progressive long term test with a daily driver where you break the car into 3 or 4 treatment zones, LF RF LR RR, if you could even leave some portions of the chassis/body with a no treatment factory finish divider. A truck always makes for good chassis to use lots of open areas .

@josephpuchel6497 Год назад

Hey It’s another great product. I’m using Woolwax,Fluid Film inside enclosed areas like wheel well arches, rocker panels between metal not exposed directly to the elements. I might even use this product in inner cavity. I have also starting using a salt eliminator . Excellent video tutorial

@rubberbabybuggybumper6270 Год назад

Wool wax is the best

@michaelg.stranestrane1465 Год назад

Good video young man. I am a retired Mechanic from the Operating Engineers here in Akron. I have use Blaster Products forever. I will try Surface Shield. I used for years some of my own concoctions that are interesting. Any way good video.

@joeblust8101 2 года назад

I'm down here in Cincy, glad to see a fellow Ohio'n testing undersprays. When I my new truck comes in, I'll definitly be looking into Surface Shield. I've used a combo of spray paint, underbody car washes, and fluid film to keep my 18 year old outback looking good underneath. And still had to cut out and patch a couple spots with new metal over the past 7 years I've owned it.

@ghneely Год назад

Applied surface shield 8 months ago and it is still wet like fluid film. I wish mine dried solid like yours. I can wipe it off with my finger. Disappointed.

@runnerbee71 2 года назад

Thanks for the in depth videos! How is this as a penatrant? Does it soak into and slow down existing rust?

@privatedata665 2 года назад

Sprayed some Surface Shield today on a Nissan previously sprayed with CRC in some areas and Fluid Film . Surface Shield seems to be a little more thin and flows better than Fluid Film but acts a little more sticky to the surface . I know my explanation seems contradictory but it seems to act just as I described . Surface Shied does not have a harsh smell like Fluid film does . I'm going to order a second 6 pack of Surface Shield .

@georgevue8175 2 года назад

Cool video - when I run out of Woolswax & Fluidfilm I will give the Surface Shield product a try. I really like using these natural safe for the environment products.

@boostjunkieMike 9 месяцев назад

Great review, thanks for sharing 👌🏾😎👍🏾👍🏾 i have some, cant wait to use it on my Mustang

@TXH1138 3 года назад

Home Depot has exclusive rights to way too many products and the pricing is out of sight. No competition equals higher prices.

@Ry_Guy 3 года назад

Home Depot sucks.

@flhusa1 3 года назад

@@Ry_Guy I must agree last 2 times i did business with them it sucked to say the least. They seem to think blaming it on the customer is the thing to do.

@RTMcFly-ni4qy 3 года назад

@@Ry_Guy Lowes is even worse.

@Ry_Guy 3 года назад

@@RTMcFly-ni4qy yeah all big box stores suck honestly

@RTMcFly-ni4qy 3 года назад

@@Ry_Guy and that's what most people have to shop at since they squeezed everyone else out. Gotta love monopolies. Smh

@rickrichards345 2 года назад

Another Great Video, Thanks! I just received a case of Blaster Surface Shield that I had ordered from HD. The cans still have the "male" outlet, but the spray button accepts a standard spray straw. So the long spray straws that are available will work with these cans for rustproofing enclosed spaces.

@6atlantis 2 года назад

Not to nitpick but technically the spray nozzle on the can would be “female” in the cases where the nozzle accepts a straw.

@rickrichards345 2 года назад

@@6atlantis Hey 6atlantis, No problem, I could probably made it clearer, but the can itself has a male outlet and the can's spray tip actually has two female ports - in and out!

@pjames4413 3 месяца назад

Thank you for the testing. I generally have been keeping my undercarriage on my 2011 Tundra 4WD rust free with Eastwood Chassis Black.. get under and touch up usually each year. But I do have a can of the Blaster, and was planning to use it where it makes sense.

@verygood8116 Год назад

Subbed. I'm just south east of you near Canton. I completely understand the rust issues we have. Ordering this now for my new Frontier

@josephpuchel6497 3 года назад

Hey Andrew Thanks for bringing this to our attention. It’s good you advised Blaster management of extension hose issue. Maybe it can be mixed with Woolwax or Fluid Film ? I’m going to pickup some cans and a 5 gallon bucket when I can get it. Keep us updated Excellent video

@rickrichards345 2 года назад

Why dilute an awesome product with a less awesome product?

@tonycavez Год назад

a 5 gallon will cost you at least $500+ let us know when you buy it because i doubt it

@josephpuchel6497 Год назад

I believe the spray can version of any product of this type substance is partially diluted in a way to help it properly spray out of can without getting clogged. Slight dilution will help everyone using a smaller air compressor. That’s all

@yusbagoosh Год назад

Maybe I’m not understanding things correctly at 7:55 but one thing I would take into consideration is that the surface shield was sprayed onto a plastic surface and fluid film onto a metal surface. A polymer (oil) will interact/adhere more strongly with another polymer (plastic wheel well) and maybe even absorb into the plastic, and will have a weaker adhesion to the metal of the frame

@corvettelifejones8625 10 месяцев назад

He was testing on the metal washers holding the plastic on

@krisholt8390 Год назад

Watched your video 8 months ago and was finally able to find Surface Shield earlier this year. I treated the inside of my Toyota’s frame and it’s been great so far. The only grip I can come up with is, when it’s hot the stuff softens enough that it drips from the frame drain holes onto the ground. I’ll be coating some of the external bits when it cools off in the fall.

@577buttfan Год назад

I use oil and it does the same thing for a few days.I think they use petro jelly in that and it melts.

@nymphowolf 2 года назад

Thanks, I live in Minneapolis, Minnesota. The winters here are harsh ND with all the salt they use, I'm going to go to home depot and pick up a few to do the bottom on my Cadillac Escalade Esv.

@davem3789 3 года назад

As you said have to be able to have an internal cavity sprayer and must have in black. Thanks for the review.

@jasonboyd5220 3 года назад

Nice! Try drilling out a cap exit hole for that hose fitting on the male cap.

@jefforr439 Год назад

2015 ram 2500, 126,000 Illinois truck. Been using Krown, no rust. I 100% recommend Krown. Also, Krown gets inside your frame frame rails, inside your fenders, inside your doors, rocker panels, and cab corners. Places where humidity gets trapped and causes rust from the inside out.

@josephpuchel6497 Год назад

It’s a very good product.

@markgamble8377 Год назад

Looks like good product. Like ur extended mud flaps too. Undercoating years ago got hard cracked held in water. That looks good for rustproofing. Before vechial ever sees a winter.

@supremexpresstransportatio4160 Год назад

Love true reviews! Dope content.

@chucky1843 2 года назад

Would you possibly be able to do a follow up video showing it maybe be on a bare piece of steel like you have on the pole, and spray it and another piece of steel with fluid film on it with some kind of salt water mixture like what project farm did and then pressure wash the pieces of steel and spray the mixture on again to see how they hold up to being washed off?

@jfque5044 3 года назад

Dude, thank you for the videos! I am moving to the Midwest next week for the first time ever. I have always lived down south or west coast so I know nothing about these coatings but wanted to learn as much as possible. The part I am sad about is that I have always been proud of my clean undercarriages and engine bays. Looks like you just need to let years of gunk build up for better protection, well here goes.. This should be interesting because I have a near mint condition 2008 Tundra and a brand new 2021 Forester with under 1000 miles. Your videos have encouraged me to do this and I believe I'll give Blaster a shot at it if I can find it in KC. I don't know though, not being able to use an attachment could push me towards fluid film, I'll try to update you, thanks!

@Bloodbain88 2 года назад

Whatever you do, make sure you do a thorough job. That salt and chlorinated liquid can get in all the nooks and crannies you miss. And there are a LOT of nooks and crannies. Pay special attention to brake lines, fuel lines, fuel tank straps, and pull any plastic body plugs in doors or under panels and spray in there. Spray above the spare tire on your truck. Inside frame rails. Inside the tailgate. Behind the tail lights, all the door latches too. Get inside the panels of the bed as good as you can. Spray the wheel wells. Inside the fenders too. A rust free vehicle in the salt belt is like a unicorn. If you coat it really good though, you can keep it that way.

@ReidEvers 2 года назад

Hey man, I live in KC too, were you able to find it locally?

@Bloodbain88 2 года назад

@@ReidEvers I know you can order cans and even buckets of it from auto parts stores like O'reillys. That way you don't even have to pay shipping. Just have them look it up and order some for you.

@jfque5044 2 года назад

@@ReidEvers Found Fluid Film yesterday at Advance, think I’m going to settle for that. I was surprised not a lot of people at parts stores and hardware stores knew what I was talking about. Most people thought I was looking for bedliner sprays..

@ReidEvers 2 года назад

@@jfque5044 Thanks. That's frustrating.

@kevinhall5311 2 года назад

Awesome job! Thanks for the great Video!

@dodgersfnshepard8673 Год назад

Thanks for this. In WV trying to spare 2 cars because of the area and I live right next to water. Never done undercoat before but will be going ham during my 6m maintenance

@david92xj Год назад

Picked up the last two cans my local Harbor freight had to give this stuff a try. Surprisingly I was able to do a pretty thorough coat of like 80% of the bottom of my 2019 Ram with just two cans. I didn't spray into the frame holes as I only had two cans so I wanted to get the most surface area I could. If I had two more cans I would be confident that it's about as good as I could get it with the spray cans. I'd say 4 cans is plenty for a 1500!

@Blackadar56 11 месяцев назад

Hey thanks for doing all this valuable research. I’ve been using rust check and krown with good results but newer vehicles are rust resistant coated from the factory better than they used to be. I haven’t kept a vehicle long enough to prove they actually work but the exposed parts on the underbody are mostly missing any undercoating after a winter. I’m thinking surface shield may be the answer for best all around coverage. Just wondering what your thoughts are with using it bulk with a pressurized 1 liter undercoating gun rather than the air / siphon type sprayer. Wouldn’t that make less air borne when spraying?

@riverdog1643 2 года назад

I can testify 100 percent, using fluid film on my 2000 jeep Cherokee has been fantastic. Will stick with it.

@ouah8ter667 2 года назад

Thank you for the good info.. and thank you blaster for making a great product..

@Derbear247 2 года назад

Thank you for the awesome videos! As a fellow NEO Ohio native I can certainly relate with the rust problems. Do you know of any good places locally that will apply this stuff for me?

@johnz.2907 2 года назад

I'm in Cleveland so right down the road from you and I tried Blaster product last year and loved it plus it was only $5 a can. No rust to report. Trying Fluid Film and Surface Shield this year on our vehicles. PB Blaster has always been good stuff. It will turn black but I just wipe excess off around quarter panels. After replacing break lines and other rusted parts on my 03' Escalade, Im not letting that happen to my 16' Ram because once Ram starts to rust its over with. Lol. Thanks again for this video.

@josegomez6549 2 года назад

A '16 vehicle doesn't come with factory coating of any time? Damn. Guess I've gotten to used to toyota lol. Wonder why they don't do it

@paulhunter9613 2 года назад

Jose Gomez Toyota has to do something because they will rust in half , cheap thin, frame and body panels

@josegomez6549 2 года назад

@@kimbuck-2 afaik toyotas come with a galvanized coating, or some type of coating, that so long as it's there it basically makes the frame rust proof. It's best to waste the car during winter season every week or two though. But technically they don't need it. They started doing the plating/coating like 20 years ago? It's nice for customers tho

@mountainsintomemories 2 года назад

I used the CRC Marine from your first video on my truck. It took about 6 cans. I will probably move on to this Blaster product in the future though.

@randygreen7871 Год назад

Excellent video, thanks so much for sharing!

@demolitionbmxd 2 года назад

Great video! I recently moved to the US from Australia and was absolutely blown away by the lack of two simple product bases for corrosion inhibiting in the states. Lanolin for one, which there are a few products for, but the biggest lack in the market here seems to be fish oil. You can walk into any auto store in Australia and buy deoderised fish oil in an aerosol. Whilst it isn't the best for undercarriage on it's own, it is great for inner sill cavities and the like. It's sprays fluid and dries tacky. There is a great product in Australia called KO-66 which is a lanolin, fish oil and bitchumen mix which is top notch, yet to find anything similar over here. Also similarly seems to be a lack of easy to access cavity waxes! Also great to use in sills and door skins etc.

@ftboomer1 2 года назад

Glad to get away from the insane jab regime? Enjoy your new found gun rights too.

@clarkharvell5242 2 года назад

Well, Van I just learned something! Thanks for the info!

@frankgulla8782 2 года назад

Fluid film, a lanolin based product has been available here for many years, just have to know where to look.

@STBRetired1 2 года назад

You really need to get more familiar with Amazon and RU-vid.

@demolitionbmxd 2 года назад

@@STBRetired1 not sure what you mean?

@clearchoicepainters9868 2 года назад

You are doing a great job with those tests, I have a question for you how to treat a area where the rust is really advanced ?

@577buttfan Год назад

Wire brush then treat as normal.Ive used TCW3 two stroke oil mixed with a splash of kero and that stuff will eventually clean the old rust off down to a better surface.But you have to keep after it.

@N9olan 2 года назад

Yes! I purchased this product some years back and it really is the best!

@carbman007 2 года назад

Thanks for the thorough investigation on this stuff.

@mikescott9213 3 года назад

Nice video, have you tested it on a rusted surface or just clean metal?

@sez2429 2 года назад

Thank you for your informative videos. It would be interesting to see how the products hold up on pitted metal vs. smooth pre-rust metal. I get a lot of salt and clay mud on the frame of my GM pickup, and have experimented with paint, rubberized undercoating, and finally oil. The oil hands down works the best. I've been using Krown and will definitely check out Blaster. I watched one of your earlier videos where Krown did not perform well on the roadside test, but I think it may hold up better on pitted vs. smooth metal (of course ideally stopping rust before it pits would be the goal - and I wish GM would e-coat their frames on full size trucks). Thanks again!

@SergeantExtreme Год назад

Rubberized coating is absolutely the worst thing in the world to use. Rubberized coating is actually WORSE than doing nothing at all. For more information, I highly recommend you check out the video "Rubberized Undercoating Will Destroy Your Car!" by the South Main Auto Repair channel, and see it for yourself. Never never never use rubberized coating.

@joebob344 2 года назад

Thanks for this video. Just came across your channel. I've always thought fluid film was the best, now I will have to give this stuff a try. Liked and subscribed. I'm from Akron also.

@on-site4094 2 года назад

Looks like a great product thanks for sharing 👍

@Papi4l2 3 года назад

i love when this guy puts out a rust preventative video. ive seen a couple other videos from him too...i like'em. i like his strait to the pointness and no sugar coating. blunt. love it. reminds me of Mark Zuckerberg...or atleast the Zuckerberg portrayed by Jesse Eisenberg lol

@RepairGeek 3 года назад

Thanks. I can only really justify a couple rust videos a year because real rust takes lots of time lol. If I could do more I would. I just don't want to be redundant with 100s of the exact same video.

@Papi4l2 3 года назад

@@RepairGeek for sure. And i appreciate the efforts put into all of it. Being there is only few videos, it makes the new ones even more exciting lol Im honestly surprised u liked my comment...i didnt think u'd like the Zuckerberg comparison lol. I meant is as a compliment...i like the facts, no fluff

@RepairGeek 3 года назад

@@Papi4l2 lol I've been called a lot worse 😅. No worries I know what you were trying to say lol

@costasmandylor7252 2 года назад

I still prefer the cosmoline-like products from Amsoil or CRC. Resists water, doesn't leave a surface that attracts dirt, easy to apply.

@doozer2726 2 года назад

Excellent video mate. I'm in the UK, and Hydrate 80? seems to be a good choice for my '01 Merc C200 W203, due to surface rust on the suspension areas - (MOT advisory). Pushing it on for as long as I can.

@94Zero Год назад

Very nice, thorough work. I too have been using Blaster, I just got lucky in my selection. I am like u in Vermont, and an annual application must be done, in my opinion.

@antouab221 3 года назад

Interesting! I would like to purchase some of this amazing new product, where in Canada will this be available? I am sure Canadian Tire in Canada would love to offer this product to its customers.

@234dilligaf 3 года назад

Good! I'm glad Amazon doesn't have it. I wish people would quit pushing Amazon on us.

@coltonsmith3686 2 года назад

Just sprayed my 2015 Silverado hd with this stuff works pretty good so far! Been using fluid film but after this video I switch to the surface shield!

@scubbarookie Год назад

Thank you for this information. I became a new subscriber because of this! I take rust very seriously! It may be the biggest threat to a car culture enthusiast. 👍Fonzie Thumbs Up!👍

@bryantate7975 3 года назад

Great Stuff! I live near the beach and was curious if you thought any of these '"too sticky" for sand? We can drive on the beach in a spot, I had DIY fluid film and just found a can of surface shield; but started wondering if this may cause sand to stick to the chassis (FJ cruiser)? Thanks

@APT-0 2 года назад

Sand will stick, CRC marine rust inhibitor or another cosmoline is better if you are in a sandy or dusty area

@Jimmmer 2 года назад

Cosmoline rp-342

@1RoadGarage 3 года назад

Nice video brother

@cm1133 2 года назад

Ha! I’m one of your subscribers!

@tanco2158 Год назад

Thanks for that information and your honest opinion... 👍✨

@thebrookster Год назад

Thanks for the video, Ive been using Fluid film on both my wife Odyssey and my F150. I'm planning on using Surface Shield once I can order a 5 gal bucket in Canada.

@jdboy9 3 года назад

Ohhhh man looks like I'll be using this stuff. These NE Ohio winters are a pain

@mercedesbenzs600bash 3 года назад

New Jersey winters also...

@jeremylakenes6859 3 года назад

I just own a ford and it comes standard with oil leaks. Great rust prevention

@buffaloaf8205 2 года назад

Must be nice Chevys come from the factory with rust

@firebladex8586 2 года назад

😂 I have a 21 year old Toyota that has a unintentional under coating also.

@fordnut4914 2 года назад

My ford's don't leak nothing ones a 92

@johnt6673 2 года назад

My fords have never had oil leaks.

@jeremylakenes6859 2 года назад

@@fordnut4914 must not drive them much or it was built on a Wednesday by a Chevy worker who just transferred to Ford. Jk, how many miles?

@craigdaly5111 Год назад

Very interesting review thanks for posting 👍

@mikerayle6103 Год назад

Just got my first truck 2015 silverado and it's in nice shape for michigan no body rust and I want to keep it that way. I've been considering doing something but looks like I need to invest in something along these lines. A gallon bucket and a sprayer for about 150.00 and some of my time would probably prevent a hundred headaches down the road.

@taylorschmidt5701 2 года назад

Might not be as easy to use as the cavity attachment, but you can use the WD-40 spray nozzles with the red straw attached. You could probably even rig it with a extension to make it easier.

@MnRautollc 3 года назад

Love your videos. Did alot of similar testing with many same products. Correct me if I'm wrong but I don't believe you've tested Corrosion Free rustproofing ™? If you did, I be curious of your findings. We own a rustproofing shop in the "thumb" of Michigan and we love our Corrosion Free. Thanks.