Тёмный

I Flipped a $600 Car. 

Mikhaxl
Подписаться 10 тыс.
Просмотров 268 тыс.
50% 1

I hope you all enjoyed this video. It took me over 35 hours to make so please drop a like and subscribe if you haven't already.
The act of flipping a car is simple. You buy an automobile at a low price and resell it at a higher price for profit. Well it’s not just that simple because the most difficult part is actually finding a good deal.
Using my prior experience, I ended up searching for a car on Copart.com which is not a sponsor of this video. Copart sells clean, rebuilt and salvage title cars that go through insurance claims. They do also sell donated vehicles that sometimes if you get lucky don’t have any problems.
The auctions are held 100% online so that means you can buy cars from different states
In order to bring this car to run mechanically sound, there are a few items that need to be done to this car. Let’s break it down. As previously mentioned, this model of the Ford Focus has a few common issues, the valve cover gasket will need to be replaced, along with the engine mount. This car will also need a fresh oil change along with a complete full detail inside and out.
The first item I decided to tackle was the valve cover gasket. In order to replace the valve cover gasket, the coils needed to be taken off.
The timing of this flip turned out very well. While I was repairing the car, I found out that my brother in law was looking for a cheap car to buy. So I decided that instead of posting the car up for sale for around 2.5k - 3k, I would just sell it to him for 2k and immediately secure the profit. And that is what I ended up doing. With the sale secured, let’s break down the cost, the true profit and the hourly rate.
I won the car for $675. After all the fees, I ended up paying $943. The total cost of the parts came out to $102.34. A detailed breakdown of the parts that I bought, you guys can find down in the description while you’re dropping a like on this video.
The car detail was $350 and the trip permit that I purchased for it was $34.
So all in, this car cost me $1,429.31 bringing my clean profit to $570.69. Based on that profit I walked away with a $71.34 hourly rate. If I would have waited for a buyer at even 2.5k, my profit could have been $1,070.69 and my hourly rate would have been $133.84. Not too shabby.
Here is the detailed breakdown:
Bought: $675
Fees: $268
Gasket: $13.98
Engine Mounts: $40.98
Spark Plugs: $10.39
Oil Change: $36.99
Car Detail: $350
Trip Permit: $34
Total Cost: $1,429.31
Profit: $570.69
Hours: 9 hours - 1 hour for filming
Hourly Rate: $570.69 / 8 hours = $71.34
My videos are not financial advice so please take it as a grain of salt. I hope you have a good laugh out of it as well. Enjoy the video and please share your feedback, like, and subscribe!
#finance #flippingcars

Опубликовано:

 

15 июн 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 389   
@JRGarage
@JRGarage 2 года назад
Great video and flip!
@mikhaxl
@mikhaxl 2 года назад
Wow appreciate it! Feels awesome hearing that from the OG car garage! 🤝
@raygomez2000
@raygomez2000 Год назад
The guy who did the detail probably earned a higher hourly rate.
@mikhaxl
@mikhaxl Год назад
Haha perhaps. Not sure how long it took him but probably more than 7 hours.
@santosf1107
@santosf1107 Год назад
Actually that detail was a good deal he removed the seats and the carpets plus buffing it that made a big difference 👍
@joestewart8966
@joestewart8966 Год назад
I can assure you, he most definitely did not yield a higher hourly rate.
@xur1317
@xur1317 Год назад
@@joestewart8966facts, 71 an hour is great
@huerosapo
@huerosapo 7 месяцев назад
He would have made more on the car had he not hooked a homie up plus that 350 for the detail was absolutely worth it.
@mr.g.culinary
@mr.g.culinary Год назад
So with due respect, the title and thumbnail are outright deceptive or wrong.. it wasn’t a $600 but rather closer to $1,000 and you didn’t sell it for $3,000 but rather $2,000.. You did a nice job on the car, but why stretch the truth??
@mikhaxl
@mikhaxl Год назад
Thank you! I just wanted to show the amount I won it for (without fees) and the potential sale that could have happened if I weren’t in a rush to sell. I would have actually gotten about 3.5k for it judging by it’s great condition. Thank you for the feedback.
@mikestech1197
@mikestech1197 Год назад
also the thumbnail is almost the same as buddy's diy
@kevinj7051
@kevinj7051 Год назад
Because he wanted more views obviously. RU-vid is a business also. I understand dat.
@lukes2219
@lukes2219 Год назад
@@kevinj7051could just make better content instead of piggybacking. That’s how you actually get views.
@LunaDaSavage
@LunaDaSavage Год назад
Karens always finding something to complain about 😂
@Brysonandmason320
@Brysonandmason320 Год назад
To anyone watching this something to take note just cause you see engine oil like seen in this video doesn't mean it popped a head gasket there can be a few variables to this, 1. the car sat at an auction site for a set amount of time and the engine went through cold mornings and hot evenings causing condensation to form in the valve cover which can cause the oil to look like this. 2 the oil cap seal if equipped can cause moisture build up causing the water in oil, dont panic with out doing further testing its simple to say its one thing just by looking at 1 piece of evidence but its better to rule all variables out. This was a great video but a bit misinformative.
@Minho_Lee1999
@Minho_Lee1999 9 месяцев назад
I was thinking the same thing. Probably a condensation since it's sitting a while at the auction lot.
@zaceriah8576
@zaceriah8576 Год назад
Great video man! I love your video style - informative and fun. Thanks!
@GeRoMe848
@GeRoMe848 Год назад
Great video man. Well done work. Cool to see someone local doing this so well
@anilvirginia
@anilvirginia 7 месяцев назад
Great video. Really enjoyed your process and how you explained everything you were doing. Definitely looking forward to more flips!
@InPropheticTimes
@InPropheticTimes Год назад
I've never seen anyone detail under the carpet... of a car. That's insane level of detail, kudos to that guy! Also, you're a nice bro for hooking him up for $2k... you could have got @ least $3.5K
@Guynhistruck
@Guynhistruck Год назад
Yeah, it's very rare you would go to that length. I upcharge like a MFer for that service level just because of the things that could (and often do, even if you're careful and know what you're doing) go wrong when you're stripping it down to metal and wiring. If he charged any less than like $600-750, that was a serious favor, and that's assuming a bare clean without any kind of protective coatings or anything.
@Obstone0
@Obstone0 Год назад
@@Guynhistruck He charged about $350 for the detail, it's shown in the fees of the video. I agree though, that detailer should be charging a minimum of $500, especially since he's going above and beyond by cleaning the engine bay, cleaning the carpet outside of the car and also putting a protective sticker over the carpet for an even more premium feel.
@Guynhistruck
@Guynhistruck Год назад
@@Obstone0 yeah, I'm an idiot for missing that. Absolutely ridiculous deal, though. I'm in a huge major city, so prices are naturally inflated compared to most everywhere else in the country, but even where I used to live in the middle of nowhere that'd still be around a $500 job like you said. I'm impressed by the level of work he was willing to put in for the price, but also feel a bit frustrated on his behalf: people pay you for your expertise, track record, and the quality of job you do, not your time or labor. Seems like he's got all of those in spades, so it seems like the work was very undervalued and he really deserves more. No slight to the creator here, because a deal's a deal. It's more that it's sad to see people who do such high-quality work charging so little, while many huge shops do mediocre jobs and charge insane prices for it, and everyone is just ok with that.
@sneakerfreak2002
@sneakerfreak2002 2 месяца назад
That’s not detailing . More like reconditioning & light restoration. I wouldn’t even get out of bed unless I was paid 600 to 1000 dollars to deal with that mess
@aca2983
@aca2983 Год назад
I have a 2011, which is about the same mechanically. You covered 2 of the main weaknesses on the car: valve cover gasket, engine mounts (espec. the passenger side). Sway bar end links are the other one. I have read that OEM engine mounts are getting hard to find, and aftermarket ones always fail fairly quickly. I have seen used Focuses, usually between 06-11 with the Duratech engine with 200-300k easily. They are not perfect cars but easy and relatively inexpensive to fix and will last with good care.
@landonk4566
@landonk4566 Год назад
I have a 2010 focus. And I also have a lot of shaking in the dash. Which new motor mounts would you recommend?
@rogerpratchet
@rogerpratchet Год назад
@@landonk4566 try to find that one that have "hydraulic" in it's description. Cheapest that have only a rubber insert are trash.
@UrAuntie04
@UrAuntie04 Год назад
Got a 2011 Focus SES here, had bought it in 2022 and had to have the engine mounts and valve cover gasket fixed as soon as I purchased it, and recently had problems with my power steering pump. Other than all that she runs like a beauty at 184K and no check engine yet
@derekgardin1512
@derekgardin1512 Год назад
That little bit of milky oil you saw as likely from it being started a bunch of times and not brought up to temp while at the auction. The duratec is a pretty robust engine (I have ones with 400k on them still going strong) and isn't known for blowing head gaskets.
@mehgusta
@mehgusta Год назад
i bought an 05 hatch for $400 daily drove it 70 miles per day to work & took multiple 600 mile round trips across florida lol ran dry of oil one night somehow. no oil light, nothing. just gave er some sauce to pass someone & boom knocking.. i filled it up and drove it still for another few months until i replaced it with a lil turbo 6spd car. put 3k miles on it. the knocking got so bad i was scared to drive to work, but i had to do what I had to do lol..
@chewbacag914
@chewbacag914 10 месяцев назад
Awesome video! Excellent work! You covered all the bases with plenty of detail. Can you do a video on the easiest Honda to flip?
@firashaddad8634
@firashaddad8634 Год назад
Good job bro Just a tip before you start the car you need to check the oil the cooling and you can actually go see the car in the copart yard
@ildarmingazov2304
@ildarmingazov2304 Год назад
Good for you! Best regards from Kazakhstan! Tararabit.
@Live-Life-Freely
@Live-Life-Freely 9 месяцев назад
Great flip, however, I can't pay someone $350 to detail a car I'm going to sell. Keep up the good work!
@hyoufs8318
@hyoufs8318 Год назад
Great watch, and I'm in no place to critique as I've never flipped a car before but I feel like you spent a bit too much for the cars worth. For a 2-3k car I ain't looking for it to be prestine so a 350 detail seems a bit wasteful but still it was fun to watch 👍👍
@DxProDuctioNn
@DxProDuctioNn Год назад
Enjoyed watching this video! Really like the editing and all the information. Would love to see more car flip videos.
@mikhaxl
@mikhaxl Год назад
Thank you! Just posted one today. 😁
@sergey_ilushin
@sergey_ilushin 10 месяцев назад
Привет, Миш! That was a great video and a great flip, well done!!!
@danieljoseph7407
@danieljoseph7407 8 месяцев назад
Love the work❤
@mikhaxl
@mikhaxl 7 месяцев назад
Thank you!
@rukhsanabibi3836
@rukhsanabibi3836 Год назад
This came out Amazing 🎉🎉🎉
@TheChaldeanMan
@TheChaldeanMan Год назад
This was a well made video 🙌
@TonyyStarrkk1994
@TonyyStarrkk1994 Год назад
That detailer gets the W on this one, wow.
@Pinchshot39
@Pinchshot39 11 месяцев назад
Yeah crazy. Never seen them take out the whole interior like that. BTW, what kind of monster gets a car that dirty?
@tonyfurneaux3399
@tonyfurneaux3399 Год назад
Hi Mik, thanks for sharing your vid, very good apart from music being loud and crap lol. Please remember the volume of the music should be louder than your vocal. 😁
@zalogon8850
@zalogon8850 Год назад
What are those carpet protectors that makes the car look like new? By the way, very nice flip! The car ended like it deserved to be treated.
@ml989
@ml989 Год назад
Can you please share who is your detailer? Looking for one in PDX. Great vid!
@user-gf7zr7kv8e
@user-gf7zr7kv8e Год назад
This guy is awesome! 👏
@jamesmarshall7907
@jamesmarshall7907 10 месяцев назад
Great work 👍
@karamrammo8571
@karamrammo8571 10 месяцев назад
There's condensation in engine oil that happens over time it's not always necessarily a blown head gasket. If you flip some of the engine oil caps you will see this. Unless the oil is completely turned into milk shake it's also true if your coolant does the same you would definitively have a blown head gasket
@earnyourmillions55
@earnyourmillions55 Год назад
Reconditioned process is crazy most people have no ideas!
@johnscomments9854
@johnscomments9854 4 месяца назад
Great video! I honestly think guys like you undercharge for your cars. I always pay extra for a well maintained clean car, its just worth it to me. What's 500 bucks extra to have a clean car.
@willmart1969
@willmart1969 10 месяцев назад
good video. I flip cars as a part time. Your video help a lot.
@nodak81
@nodak81 2 года назад
"Flipping a car is quite simple." Step 1) "Find an automobile for a low price." -- Yep, that sure is easy to do these days. Quite simple indeed. Except for the part where everybody thinks their broken-down, rusted-out sh!t box is worth a fortune.
@mikhaxl
@mikhaxl 2 года назад
Haha true 😂
@larryrichardson5167
@larryrichardson5167 Год назад
LMao.. I saw a 2009 Yaris with 246,000, just needed brakes , shocks, and an AC, body had mismatched doors. $1795. First, who the hell could SIT in a yaris for 200,000!
@flowmartinez7913
@flowmartinez7913 Год назад
They have condensation that creates on top of the engine from cold and hot Temps
@ozzstars_cars
@ozzstars_cars 10 месяцев назад
You gave that old Focus a new lease on life. I see the crappy CVT transmissions fail all the time. Guess you got a good one! Nice! -Glen
@kingsj7662
@kingsj7662 10 месяцев назад
Quick question when you buy the car do you need to signed the title right there? Or can you sign it at the dealership?
@Norday
@Norday 9 месяцев назад
Great video! Keep doing
@mustafaahmed4644
@mustafaahmed4644 Год назад
Great work
@Kentuckyvlogs
@Kentuckyvlogs Год назад
I've sold several focuses at my car lot , and usually do a lot of the cheaper style cars like on my videos
@coleehoskins
@coleehoskins Год назад
So Was getting the car registered and insured and tax and title incorporated? Or are you not registering the car? How is the title transfer done if you never had the title in your name?
@the.pirate_memer
@the.pirate_memer 10 месяцев назад
The engine was having a dance party when started up
@reactionpods8954
@reactionpods8954 3 месяца назад
tbh they have head gasket in a can in a bottle you could buy for any future reasons
@MoGumboFukUTubeForChngngMyName
You didn’t see water in the oil when you pulled dipstick? And you didn’t drain oil to check for water before you continued working on the car?
@michaelsykes3659
@michaelsykes3659 Год назад
Excellent video, great job! New to channel, like the narrating aspect and the filming of the process! Can’t wait to watch next one! 😀
@mikhaxl
@mikhaxl Год назад
Thank you! There should be a new one very soon! 🤝
@robitaillecopeland1996
@robitaillecopeland1996 7 месяцев назад
forgot to add in the cost of the tow. I know it was your Dad but it still should be accounted for. Also, zero chance your parts only came up to $100. Also, the fees were more expensive than you listed. At the end of the day, you probably yielded maybe $400 profit. Great video nonetheless
@mikhaxl
@mikhaxl 7 месяцев назад
Thank you
@nimcanhilacchannel8364
@nimcanhilacchannel8364 Год назад
great job on the video,
@alextribunskiy3163
@alextribunskiy3163 2 года назад
This is one of the best videos by far! Amazing flip!
@mikhaxl
@mikhaxl 2 года назад
Thanks bro!
@SideKickStudios
@SideKickStudios Год назад
Those old Focuses are nuke-proof. It can probably do another 100K with hints of mayo in the oil, especially if you service it on the regular. Also, those old spark-plug electrode gaps.. you could park a bus between 'em :D
@saleemomar9362
@saleemomar9362 Год назад
great content
@superd0fad0
@superd0fad0 Год назад
In your calculations you are not considering your salary. The average hourly rate for a mechanic is $90. You should have spent 6.3 hours(570/90=6.3) working on the car. Honestly, going to pick up the car, the towing service and the time invested in the repairs was only 6.3 hours? I doubt it
@mikhaxl
@mikhaxl Год назад
Yessir. I kept track of my time
@GeorgeLiquor
@GeorgeLiquor 7 месяцев назад
This is the first time I've ever heard "winning" and "Ford Focus" in the same sentence
@BuddyTheWolfYT
@BuddyTheWolfYT Месяц назад
Also you didn't replace the lifetime air filter, all of those are clogged up by now, its really easy to cut the maf tube and clamp on a cone filter
@mikesawyer4707
@mikesawyer4707 Год назад
Wire brush the plugs. Regap. Install. Return new set of plugs for credit. done. Good luck with this one.
@fandechavalones3022
@fandechavalones3022 Год назад
Why does air blow out of the oil cap ? On these engines ?
@guardrailman6924
@guardrailman6924 Год назад
Nice! When I grow up I want to flip cars
@alirazmjou2149
@alirazmjou2149 11 месяцев назад
Thank you so much for this video متشکرم از شما
@joemills4716
@joemills4716 10 месяцев назад
So did you have to have a brokers license where you are to buy clean titled cars? Apparently in Texas, I will need to go through a broker.
@WaynesAdventure
@WaynesAdventure 9 месяцев назад
Looks good
@AlexYeets
@AlexYeets Год назад
Milky oil at the top end of the engine like what you pointed out usually happens to be light condensation. Vauxhalls are really bad for it, they condensate crazy and look way way way worse than that - but they don't have a head gasket fault.
@mikhaxl
@mikhaxl Год назад
Seems like that’s what it was because my brother hasn’t had any problems since.
@BaptistJoshua
@BaptistJoshua Год назад
@@mikhaxl You should add this note to your description, otherwise people wonder if you sold a car to a relative that needs major work.
@OGKrypt
@OGKrypt 2 месяца назад
Yo just so you know you need to always always put a thin layer of new oil on your oil filter ring always just dip your finger in the oil and apply to the rubber it did not seem after you popped the seal on the oil you did that btw
@pastoryoda2789
@pastoryoda2789 6 месяцев назад
My Grandparents live in Madisonville Tennessee and behind and beyond their back yard there is a huge Copart field filled with cars and they hate it lol
@EvlEgle
@EvlEgle Год назад
You can get those engines from scrap yards for under 400$. I got one to use in my Mazdaspeed (yes mazdaspeed) for 290$, sold the head, oil pan, timing cover, valve cover, and intake manifold and made money. I know your car may not be the 2.5, but the 2.5 is super common and can be swapped into the 2.0 and 2.3 cars easily, and its very very very cheap since Ford and Mazda used them in so many cars for so many years.
@mikhaxl
@mikhaxl Год назад
That’s good to know. The biggest issue really isn’t the parts for me, it’s the labor. I can do minor stuff to the car, but swapping out an engine hasn’t never been my forte.
@EvlEgle
@EvlEgle Год назад
​@@mikhaxl Ah, well when you said it might have a bad headgasket I figured I would let you know. I tried rewinding because I never saw the oil drain, I assume that all worked out for the better though.
@derekgardin1512
@derekgardin1512 Год назад
The engines are cheap for these cars because they were used in alot of vehicles and they also don't tend to have major failures often so the used engines never get sold. I've had many that are over 350,000km still running strong. They are a very good engine.
@michaelwarrick3053
@michaelwarrick3053 10 месяцев назад
Nice job.
@ill4763
@ill4763 11 месяцев назад
Did you need a dealer's license or a business to buy from copart ? if not then how did you do it?
@831piper
@831piper Год назад
Nice flip
@ciprianion4142
@ciprianion4142 10 месяцев назад
Love those car flipping videos!!! Few things I would advise you to do next. When teightening the bolts use a torque wrench to torque it to specs and before putting the oil filter on fill it with fresh oil.
@Gdsamplify
@Gdsamplify Год назад
Bro think he's Buddy's DIY 😂😂😂
@joelsantana3772
@joelsantana3772 Год назад
Not even close
@joelsantana3772
@joelsantana3772 Год назад
You dickeating heavy
@Richardv24
@Richardv24 Год назад
Shhhhh! We need these RU-vidrs!
@nonameno7096
@nonameno7096 Год назад
Buddy diy hasn't posted anything in ages !!! He's the best in this game
@macmondays1804
@macmondays1804 Год назад
So? At least he’s hustling. What about you? Stop hating and go get your own. You pussy ass nigga.
@irzumkhan412
@irzumkhan412 9 месяцев назад
May I know the place name for detailing?
@LayzeeJay
@LayzeeJay 8 месяцев назад
You shouldnt need big guns to torque a valve cover. It’s usually less than 20 ft lbs
@BrandonC00
@BrandonC00 11 месяцев назад
How did you buy thru copart do need a license of sorts?
@billnotpay
@billnotpay Год назад
I literally see a buddy's diy video under this one lol 😂
@BuddyTheWolfYT
@BuddyTheWolfYT Месяц назад
Just fill the old engine mount with 3m window weld urethane, it will last forever, did that on my focus
@Fernandez.1987
@Fernandez.1987 Год назад
I hate how them big forklift sometimes bent the lower control arms on cars or wheels.
@finnleygordon577
@finnleygordon577 11 месяцев назад
When I lived in Salem it said the company website was not available to me
@ronwiltshire5739
@ronwiltshire5739 10 месяцев назад
How do you avoid paying sales tax?
@angelo4832
@angelo4832 Год назад
what about the blown head gasket lol
@abenzuoo
@abenzuoo 11 месяцев назад
good job
@tweedjohnny8740
@tweedjohnny8740 Год назад
Good job on the flip young man, but in your breakdown of your investment you left out the price of your father's tow bill. If he didn't charge you I hope you bought his fuel for the haul. Enjoyed the video.
@davewave3934
@davewave3934 2 месяца назад
Deduct the cost of the tow from the auction lot from the profit for most viewers, unless your dad also has a tow truck.
@macknumber9
@macknumber9 Год назад
$600 into $3000 $1400 into $2000 I guess the former gets way more views....
@mikhaxl
@mikhaxl Год назад
I just wanted to show the amount I won it for (without fees) and the potential sale that could have happened if I weren’t in a rush to sell. I would have actually gotten about 3.5k for it judging by it’s great condition. Thank you for the feedback.
@macknumber9
@macknumber9 Год назад
@@mikhaxl not giving you a hard time though I think the video was great and well done. Thanx for creating it and showing us how you worked on this specific car.
@fredmatic33
@fredmatic33 2 года назад
Very often engines that just get started and moved around the Copart lot, will build up condensation in the crankcase. They don't get enough run time to burn that off. Since the head gasket tuned out to be ok, a nice drive with fresh fuel for about 30 minutes should take care of that, and make it run even better.
@mikhaxl
@mikhaxl 2 года назад
You are correct. That’s what we ended up doing and it’s running as good as new!
@markm0000
@markm0000 Год назад
Also dump a quart of ATF in the fuel and run it hard for a few days. It should clean it up nice.
@xpokerxpoker8490
@xpokerxpoker8490 Год назад
Where can I buy a flip car?
@rafgarciaa
@rafgarciaa 6 месяцев назад
For $2000, that's a steal
@brown5252
@brown5252 Месяц назад
Help me understand possible head gasket issue? Why cont on doing all that work not knowing the head gasket issue?
@pablobon5957
@pablobon5957 8 месяцев назад
So what happened to the oil and water mix issue?
@mikhaxl
@mikhaxl 7 месяцев назад
Looks like it was just condensation. It went away afterwards.
@vladbossd8791
@vladbossd8791 Год назад
Mikhaxl do you have a dealers license or how did you play the car
@mikhaxl
@mikhaxl Год назад
I play cars through one of my friends dealers license.
@obamaatemyson5297
@obamaatemyson5297 Год назад
The milky oil is just condensation. If there was coolant in the oil or water in it, the entire oil would be contaminated.
@davidhg117
@davidhg117 Год назад
13:30 you forgot to change the inner engine mount, that's why the car rattled like crazy on start t. has 3 ford focus
@papizer4473
@papizer4473 Год назад
Big fan bro
@noodlex4669
@noodlex4669 9 месяцев назад
seats looked a bit sus
@richardepstein3494
@richardepstein3494 2 года назад
So, how was the head gasket?
@mikhaxl
@mikhaxl 2 года назад
It seems to be working well. Was probably some condensation that piled up.
@MotorBikesWorldWide
@MotorBikesWorldWide Год назад
Where tf do you get a car for so cheap I’m looking on Fbmarket place and even if I do find em they never respond
@CASPER2V
@CASPER2V Год назад
if my 02 ford focus wasnt my daily i would totally put some money in it to flip since i only bought the thing for 400 dollars running and driving
@ultraradio5
@ultraradio5 Год назад
COME ON NOW THATS TOO EASY
@addieshank5438
@addieshank5438 Год назад
if you do it yourself whys the headgasket 1k?????
@jgn1977
@jgn1977 2 месяца назад
The head gasket issue just went away I guess?
@kennybeck5519
@kennybeck5519 8 месяцев назад
Bro, you seem like competent person, a head gasket is not a deal breaker. Its a lot of work, but the part itself is only maybe $40. And, i bet if you search RU-vid you can find instructions.
@alexxchavez1913
@alexxchavez1913 Год назад
WHY IS THE MUSIC SO LOUD BUT THEN YOUR SPEAKING VOLUME ALL OVER THR PLACE?
@awesomEDD16
@awesomEDD16 11 месяцев назад
Kinda half ass on the engine mounts, I’ve done several ford focus with that vibration issue and they needed all 4 motor mounts replaced
@malakis9421
@malakis9421 Год назад
Quality coming out of Oregon 🦾
@mikhaxl
@mikhaxl Год назад
Thank you! 😄
@mph5896
@mph5896 Год назад
FYI, those ignition coils. You can buy just the rubber boots for them. On that particular case, I would have just cleaned the plugs and installed new rubber boots since compromised by the oil.
@mikhaxl
@mikhaxl Год назад
I might go back and do that later. The car to still be running great.
@derekgardin1512
@derekgardin1512 Год назад
Meh the boots are fine. I wouldn't waste money. Also there's no sense replacing coil on plug style coils unless there's an issue. I've had many that were original equipment and have 300k on them still fine.
@derekgardin1512
@derekgardin1512 Год назад
Fords also like Motorcraft plugs. My cars always ran better with OEM plugs and sensors. Fords seem to be picky with that stuff.
Далее
I bought a USED BMW for only $725,  Here's the reality,
30:41
How To Flip Cars | FULL PROCESS [13]
29:21
Просмотров 338 тыс.
I Flipped a $5,000 Car.
18:20
Просмотров 10 тыс.
How To Flip Cars | FULL PROCESS  [3]
18:33
Просмотров 923 тыс.
Testing the World's Most Hated Tool
14:01
Просмотров 7 млн