I got Gen7 Z-Wave working in Home Assistant

Подписаться 28 тыс.

Просмотров 15 тыс.

50% 1

Join me in Revolut - peyanski.com/revolut/
Aeotec Siren 6 + Button - amzn.to/3bng9xP
How to update and how to add the Aeotec Z-Stick 7 in Home Assistant using the Z-Wave JS integration. The whole point of doing this is to add a Z-Wave controller in your Smart Home so you can control & automate Z-Wave compatible devices inside Home Assistant.
► MY ARTICLE ABOUT THAT TOPIC - peyanski.com/aeotec-z-stick-7...
► MY HOME ASSISTANT INSTALLATION METHODS FREE WEBINAR - automatelike.pro/webinar
► DOWNLOAD MY FREE SMART HOME GLOSSARY - automatelike.pro/glossary
► AFFILIATE LINKS
Aeotec Z-Stick 7 - amzn.to/3xoIUCT
Aeotec Siren 6 + Button - amzn.to/3bng9xP
Aeotec Siren 6, Z-Wave Plus S2 Enabled - amzn.to/3xipHmc
Zooz 700 Series Z-Wave Plus S2 USB Stick - amzn.to/3mee4qj
Nortek Z-Wave & Zigbee combo stick - amzn.to/3NjZN7t
Aeotec Z-Stick Gen5 Plus (older, but still good Z-wave stick) - amzn.to/3x8BF0t amzn.to/3Qhcemr
SmartThings Hub - amzn.to/3MreZ1b
Hubitat Elevation Home Automation Hub - amzn.to/3tiAbQ2
SwitchBot Flash Deals - switchbot.vip/3BwF221
Reolink Flash Deals - shrsl.com/301ih
Aqara Amazon Store - amzn.to/3EpeCSb
Shelly Official Store (main page) - bit.ly/3BwMMn2
Tech that I’m using right now - www.amazon.com/shop/kpeyanski
Get $100 in credit over 60 days for DigitalOcean - m.do.co/c/6dd2caef1f1f
Register for Kajabi from here app.kajabi.com/r/NetydFAg and I will share half of my commission with you (15%)
► CRYPTO AFFILIATE LINKS
Sign up for Crypto.com and we both get $25 USD (Referral code: xn86atnceg) - crypto.com/app/xn86atnceg
Deposit more than $50 in Binance and receive 100 USDT cashback voucher - www.binance.com/en/activity/r...
Binance - One of the biggest Crypto currency exchange - www.binance.com/en/register?r...
► SUPPORT MY WORK
Paypal - www.paypal.me/kpeyanski
Patreon - / kpeyanski
Bitcoin - 1GnUtPEXaeCUVWdJxCfDaKkvcwf247akva
Revolut - revolut.me/kiriltk3x
► TIME TABLE
00:00 Intro
00:40 What is Z-Wave?
01:05 What is Z-Wave JS?
01:53 What is Z-Wave Controller?
03:24 Update any Z-Stick 7 with Windows
07:27 Aeotec Z-Stick 7 Firmware upgrade from PC controller
09:16 Adding Aeotec Z-Stick 7 in Home Assistant using Z-Wave JS
11:25 Adding Z-Wave devices in Home Assistant
12:32 Adding Aeotec Siren 6 in Home Assistant
14:34 Configuring Aeotec Siren 6 from Home Assistant
16:26 Creating Aeotec Siren 6 Automation in Home Assistant
► UPDATE Z-STICK 7 WITH WINDOWS - SUPPORT ARTICLE
aeotec.freshdesk.com/support/...
✅ Don't Forget to like 👍 comment ✍ and subscribe to my channel!
► DISCLAIMER
Some of the links above are affiliate links. If you click on these links and purchase an item I will earn a small commission with no additional cost for you. Of course, you don’t have to do so in case you don’t want to support my work!

Хобби

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@1ryanlc Год назад

Thanks for simplifying the whole process, I couldn't have done it without you!!

@KPeyanski Год назад

You're very welcome!

@cambevis Год назад

Thanks so much for the walkthrough on the firmware update for the Aeotec Z-wave 7 stick! The docs were nothing like the app and your video saved the day!

@wa8khp-468 Год назад

FANTISTIC VIDEO!! I also used this articel to upgrade firmware for my ZST10 700 after getting the firmware. I could not have done it with out you! Thanks David

@KPeyanski Год назад

Glad it helped and thanks for sharing :)

@SandroMoiron 2 года назад

Big fan of your content. Your videos have superb 4K quality and are well organized in chapters for people to be able to skip forward to the relevant part. Great content and nice home decor.

@KPeyanski 2 года назад

Wow, many thanks for the compliments! I'm very happy to see that my hard work is noticed. Stay around as more new content is coming and it is pretty exciting!

@davidlakes5087 2 года назад

Fantastic breakdown. And I love your accent.

@KPeyanski 2 года назад

Many thanks. You can check my other videos as well.

@khalpin11 Год назад

thank you this helped a bunch! got my sensors hooked up now finally

@KPeyanski Год назад

Glad I could help and Enjoy!

@businesstalk Год назад

Great video, thanks!

@KPeyanski Год назад

Glad you liked it! Check my other videos as well!

@JasonRayment Год назад

Great video Sir 😎

@KPeyanski Год назад

Glad you like it. Check my other videos as well.

@JasonRayment Год назад

@@KPeyanski I have a question what if Im on a Mac how do I do this 😅

@Nicolas-nd2hd Год назад

Thank you for this video. This just helped me to update my stick and add it to Home Assistant. The updating process of Silicon Labs is atrocious

@KPeyanski Год назад

Glad it helped! Check my other videos as well!

@weekendwarrior3420 Год назад

Really helpful to walk through the horrid f/w update, and the rest is very good too.

@KPeyanski Год назад

Glad you like it! Check my other videos as well!

@khalpin11 Год назад

Thanks!

@KPeyanski Год назад

Thank you too. Join my Discord server (link in the video description) so I can give you a small reward there. Just ping me there so I can recognise you!

@stephanbuhler5857 7 месяцев назад

Thanks Kiril for this video. Since about 2 month, my Z-Stick 7 doesn't work anymore with HA. I downgraded, I bought a new stick and posted informations in different Github Issues, but they where all closed now (stale/autoclose) because nobody works on the issues. I am wondering know ... do you have any issues with your Z-Stick 7 and the newest Z-Wave JS or Z-Wave JS UI and the newest HA Version?

@dancepheus Год назад

this helped

@KPeyanski Год назад

Glad to hear that!

@IAmZen_007 5 месяцев назад

Hi there, how is the signal strength of the Aeotec? On the website of HA it’s written not to use it because of bad signal…

@oceanz55 2 года назад

Hey Kiril! Thanks for the video! I have recently purchased a RazBerry Z-Wave HAT and was looking for a tutorial to incorporate it into Home Assistant. The problem is that my HA instance is running in a VMWare cluster so I cannot add it directly and was intending on having it on a remote Raspberry Pi that would communicate with Home Assistant via the network. I am guessing Zwave2MQTT is my only choice. Any advice (or tutorial) on this kind of setup would be much appreciated! Thanks again and see you in the next one!

@KPeyanski 2 года назад

Thanks for the good words. Zwave2MQTT should work will think about wether I should make a tutorial about it.

@BilginOzkan76 2 года назад

I have a Vera Plus controller integrated with both node-red and Home Assistant. My z-wave devices (mainly Dome branded motion sensors) have been the most consistently reliable. I did have a cheapie z-wave power plug however that would end up with random disconnects, but I don't know if I could attribute that to the Vera hub. Looks like the z-stick 7 AU frequency version isn't available yet, but would like to convert once it is.

@KPeyanski 2 года назад

Many thanks for that detailed comment. Hope that they will make an AU version soon.

@peterklingeman1138 Год назад

great video!, many thanx is there a way to migrate from a z-wave razberry board, to this USB stick? How is it done? someone :)

@denveryoyo9568 2 года назад

Love the Vid. Is there a place in the US where I can get the Aeotec zwave Button device? Appears to be unavailable wherever I've looked. :-(

@KPeyanski 2 года назад

Thanks, glad you like the video, but I also didn’t manage to find the button either. Maybe they are out of stock temporarily.

@bodyadovhyi1984 Год назад

Hey Kirill! I have some questions about Z-Stick 7: 1.This Z-Stick 7 has a frequency 908.4 MHz or 868.4 MHz? 2.Can it be upgraded from US frequency to EU frequency and it will work in EU?

@KPeyanski Год назад

1. Both are available. It all depends what you order 2. I think - no! But you better ask the Aeotec support to be sure.

@coreybruyere2371 Год назад

How can I update firmware with a Mac?

@Dimmers Год назад

Just an FYI, since this video, there is now an AU and international version of the firmware. As an Australian, I went to download the AU version but there seemed to be an error - 0x50 I ended up downloading the international version and it seems to be working. This is for Any Australian viewers or non US/EU viewers. IF it comes in handy great. If not... oh well.

@MrSupersidewinder 2 года назад

Wow, they made that update process difficult.... There is no reason for them to make customers go through all that just to update firmware... 0 points to Aeotec for that... I think this is the best stick going but now I just don't like their policies... Buy a device with bad firmware, submit all kinds of information, jump through hoops, etc... Bad trend... Great video though as always!!!

@KPeyanski 2 года назад

The update process is not coming from Aeotec, but from Silicon Labs. Silicon Labs are the Z-Wave owners at the moment and all Gen7 devices have their chips inside. So if there is someone to blame for the update process that is Silicon Labs. Thanks for commenting and for the good words about the video 👍

@MrSupersidewinder 2 года назад

@@KPeyanski Hopefully Aeotec will flash the 'fixed' firmware in newer units... I wonder now if the linux update process is any more straight forward... I am using zigbee stuff so far but there are some great z-wave pieces out there! 😁👍

@KPeyanski 2 года назад

Yes, most probably all brands that are selling Gen7 Z-Wave sticks will pre-update the firmware on their newer units, but that is not the case for now. As my unit was brand new, but with old FW. The Linux FWupdate process is with a lot more steps and it is generally harder than the Windows one, but if you have some experience with Linux it shouldn't be a problem.

@KennethLavrsen 2 года назад

I used the Linux method to update the stick. If you already have a running Linux computer all the first steps are already done. Adding your user to the dialout group is maybe also already done if you are used to running USB serial devices. The rest is installing minicom (one command) and follow the simple steps. It is not really that hard. The Windows installation is an insult. All the registration and installation of hundreds of megabytes of garbage just to upload a small firmware file with xmodem is total madness. Silicon labs could create a small firmware upload exe in a few hours instead of pushing end users through this shit. And so could Aeotec.

@KPeyanski 2 года назад

Totally agree with you. Hope that this will be streamlined in the future, but for now it is what it is.

@weekendwarrior3420 Год назад

Silicon companies just don't know how to make software. They are run by h/w dudes who think they are gods because they create chips and that is hard. Once they finish a new chip, they expect "s/w dudes to just throw some s/w on it real quick" and then they start selling it. That approach includes the firmware running inside the chip. I bought a new Lenovo laptop and it was consuming 30% CPU. I cleaned it from Lenovo s/w and it started working properly. The hard part for Windows exe is to determine which serial port is the right one. Windows doesn't make that easy. You've got to know Windows API, call a bunch of cryptic functions and get it right. Why bother if you can just throw them the bloatware that miraculously already got it right - the feat that is unlikely to be repeated again, not by a silicone company.

@Vamanos46 2 года назад

LTT Linus would find this helpful maybe? ;)

@KPeyanski 2 года назад

Sorry, but who is LTT Linus?

@Vamanos46 2 года назад

@@KPeyanski "Linus tech tips /Linus media" , that Linus. Check his recent videos about his troubles with updating 100 GE smart switches without using a hub.