I Installed a Rare SPG Bodykit on My Saab 900! 

Looks awesome! Love it. Good to hear you are reinvigorated about the project! Like you said, sometimes just focusing on a new area of the car clears your mind of previous stressors.

Foam behind the bars is tricky because it will be soaking wet. The original SPG-Kit has plastic stripes between the alloy rails and the paint. And the corner panels are not slightly different, they are much different and go far deeper than the std ones, so go and find the missing corner parts ;-)

NICE! Looks stunning. Nothing looks better on a 900 than the SPG 900 airflow kit. I sense a whaletail or porsche tail in it's near future? That and a set of 9000 Aero 3 spoke flatspoke (dished) rims, louvers and your done. I know your not a fan of the louvers, but maybe you'll eventually give in to the mullet-era saabs darkside with us? XD The wider track of those rims will also be a pleasant surprise in handling.

My almost 16 year old son found an 86 900 Turbo that had been off the road for 5 years or so. We got it cheap, $500, and it has an Airflow kit on it which is really cool but the plastic is super thin. There is some repair we have to to and then repaint it, hopefully it comes out looking good.

Great addition. Very satisfying!! Congratulations on such a fantastic transformation!!

The car looks great! My 91 has the same moldings. Plus I bought the "Build It Better" t-shirt. Keep up the good work.

That looks so good man. Well done

That Looks SLAMMIN! Good JOB!

Hello, Thank you for a good video. Nice with useful tips & tricks to install the aero kit. Keep up the good work! :)

Wow! If looks could kill? It's amazing the difference the Aero kit makes. There's not much to do now. Maybe some Aero ( SPK ) springs and then the paint. The Aero springs are 25mm lower in the front and 15mm in the rear. Improves handling. And from memory I think the front and rear stabilizer bars are thicker. When this project is finnished you should get a trophy from the Saab club! Cheers from downunder.

I'm glad they worked out for you ! Looks good. (I do have another set if someone asks)

Cracking job. Well done 👌👍😊

Something about a Saab 900 2 door. Looks great man.

Nice job there young man. I did that on my 1985 back in 92. It is a lot of work but it completely transforms the car. A good tip is to use a bit of teflon spray on the upper edge seal, where the panels come in contact with the body. It allows the panels to slide a bit easier.

Great video nice job

Awesome job

Good job! I did this job about 10 years ago on my CE convertible and foundation it very helpfull to heat the panels from the back Just before applying them. So much easier, especially with the edges. Also it could be helpfull to heat the panel before spraying to achieve a better attachment of the paint! Do not use primer other than to fill minor imperfections. When the panels are nearly perfect after sanding, use a plastic primer only I would recomment. I did mine 10 years ago and it still looks new. Good Lucky everyone!

Sweeeeeet. That was pretty involved.

Nice work...keep your eyes open for the fender flares to complete the look!! 👌

I might be mistaken, but didn't the SPG bodykit also come with thicker wheel well flares to fill in that gap between the flares and the kit? Looks great! Butyl tape would also work well in place of the weatherstripping.

I have all the spg stuff from an 87 spg . I hit an elk at 75. The roof got ripped back ,but the rest of the car is good.

awesome work! Where were you able to find the spg kit?

Looks great, but a project suggestion...maybe vinyl wrap the car in a bright color? Yellow, red, something like that

Obviously, I’m a huge huge fan, and I absolutely love your channel, and I know it’s just me being annoyed. But I’ve never been a huge fan when people put SPG bodykits/SPG things on non SPG 900s. Just because the people didn’t buy the SPG, and therefore don’t fully deserve it. But you’re not the original owner, so it’s understandable. But nevertheless, it looks amazing, and you did a great job installing it. Looking forward to seeing more content on the 900!

I really love this car but it's not simple to find a cheap one here in Italy.

I picked up a 2008 Saab 9-3, with the 2.0L turbocharged 4 banger. I was really curious on where to find after market parts?

Perhaps I missed it. Is there not a weather strip that runs along the top edge of the panel, placed between the metal and the panel? My 91 SPG has it and I see that it is sold on-line by Saabits and others.

Hi, I have a Saab 9-3 TTID 2008 and my car started losing acceleration because the particle filter is at 93% or 97% and i don't have anywhere where I can clean it, what to do?

I could really use a tutorial on how to replace the belts on a C900. Do you have something like this?

塑料要先喷底漆，再喷色漆，不然时间长了容易掉色

Sweeeeeet

👍👌

What’s a fair price for this body kit in your opinion?

You should add some music to the your videos because it feels kinda empty without it

Lol I knew you would

Honestly it's heavy looking and a lot of plastic. Kinda liked it before.

Its begging for a whale tail

🫡👍🇸🇪