I Installed R600a Inverter Compressor In OLD Refrigerator!!

Подписаться 66 тыс.

Просмотров 951 тыс.

50% 1

Are you tired of high electricity bills caused by your old refrigerator? Look no further! In this captivating video, we demonstrate a cost-effective solution to reduce your energy expenses. Join us as we install the revolutionary R600a inverter compressor in an old refrigerator, helping you save money while promoting eco-friendly practices. With the R600a inverter compressor, you'll witness a remarkable improvement in energy efficiency and cooling performance. Our step-by-step guide takes you through the entire process, making it accessible even for beginners. Discover how this simple upgrade can transform your appliance into an energy-saving powerhouse, reducing your carbon footprint and benefiting the environment. By optimizing the cooling cycles, the R600a inverter compressor ensures consistent temperature regulation, maximizing freshness and extending the lifespan of your food. The result? Lower energy consumption, reduced wear and tear on your refrigerator, and significant savings on your monthly electricity bill. Join our community of smart homeowners and learn how to retrofit your old refrigerator with the R600a inverter compressor. Say goodbye to excessive energy consumption and hello to a more sustainable lifestyle. Don't miss out on this opportunity to save money and contribute to a greener planet.
******************************************************************************
Products You Might Be Interested to Buy
Multimeters
NEOTECK Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dml...
ANENG Q1 Digital Multimeter ➡️ s.click.aliexpress.com/e/_DeU...
Digital Pen Multimeter ➡️s.click.aliexpress.com/e/_DkM...
Rechargeable Smart Multimeter ➡️s.click.aliexpress.com/e/_DDm...
UNI-T UT181A True RMS Auto Range Multimeter ➡️ s.click.aliexpress.com/e/_DFL...
ANENG 616 Large Screen Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dln...
TOOLTOP ET8135 True RMS Multimeter ➡️s.click.aliexpress.com/e/_DB8...
MASTECH MS8910 Digital Multimeter ➡️ s.click.aliexpress.com/e/_Ded...
ZOYI ZT-X Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dd9...
ANENG Q1 Digital Multimeter 9999 Analog Tester ➡️ s.click.aliexpress.com/e/_DEz...
Thermal Camera
UNI-T UTI260B HD 256X192 Thermal Camera ➡️ s.click.aliexpress.com/e/_Deo...
TOOLTOP ET692Cl Thermal Imaging Camera ➡️ s.click.aliexpress.com/e/_Dm0...
Mileseey TR120E Infrared Thermal Imager ➡️ s.click.aliexpress.com/e/_Dej...
Fluke TiS55+ Thermal Camera 9HZ ➡️ s.click.aliexpress.com/e/_DCO...
Noyafa NF 522 523 Handheld Infrared Thermal ➡️ s.click.aliexpress.com/e/_DCe...
TOOLTOP T7 256*192 Android Thermal Imager ➡️ s.click.aliexpress.com/e/_DmB...
Soldering Wires
10Pcs 2mm XZZ-2015 Desoldering ➡️ s.click.aliexpress.com/e/_Dkg...
0.8mm/1.0mm 50g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDn...
0.6/0.8mm 50g/100g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDC...
200g 500g Tin Wire Soldering Wire ➡️ s.click.aliexpress.com/e/_DdQ...
8g 50g Per Roll High Purity Soldering Wire➡️ s.click.aliexpress.com/e/_DCm...
250m/roll 30AWG UL1423 Insulation Cable Copper➡️ s.click.aliexpress.com/e/_Deu...
Vacuum Pump
18V Lithium Battery Vacuum Pump ➡️ s.click.aliexpress.com/e/_DDK...
VEVOR 2.5CFM Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkT...
Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkH...
VEVOR 1.8-4.8CFM Refrigerant Vacuum Pump➡️ s.click.aliexpress.com/e/_DeA...
Mani Fold Gauge
Digital Manifolds Refrigerant Gauge ➡️ s.click.aliexpress.com/e/_DC3...
R410A R22 R134a R404A Manifold Gauge ➡️ s.click.aliexpress.com/e/_DeB...
Refrigerant pressure gauge ➡️ s.click.aliexpress.com/e/_Ddg...
500/800PSI Refrigerant Manometer ➡️ s.click.aliexpress.com/e/_Dne...
HONGSEN HS-330 Refrigeration Vacuum ➡️ s.click.aliexpress.com/e/_DBi...
Air Condition Gauge Manifold ➡️ s.click.aliexpress.com/e/_DFu...
MRCARTOOL L202 Air Conditioner ➡️ s.click.aliexpress.com/e/_Dkg...
Soldering stations
RF4-H2 Automatic Sleep SMD ➡️ s.click.aliexpress.com/e/_DBa...
JCD 2 in 1 Soldering Station LCD Digital Display➡️ s.click.aliexpress.com/e/_DFz...
GVDA New Soldering Station ➡️s.click.aliexpress.com/e/_DDc...
JCD 8586 Soldering Station 2 In 1 Digital➡️ s.click.aliexpress.com/e/_DBX...
******************************************************************************
💡 Support Us On Patreon 👉 bit.ly/3vMga6S
💡Subscribe to The Channel 👉 bit.ly/3vNT7s3
Social Links
💡Facebook 👉 / forevertech3
💡Instagram 👉 / forever_tech1
💡Twitter 👉 / forevertech3
#refrigerator #fridge #compressor #inverter #r600a #old

Опубликовано:

7 май 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 715

@user-ye3ol4jc6o Год назад

in 1993 I was 30 and I changed the motor-compressor to r-12 in 45 minutes ... and my knees did not hurt)))

@somaday2595 4 месяца назад

Very clear annunciation, no distracting background music - this helped along with your clear step by step replacement process.

@aibi5532 26 дней назад

he's just translated someone's video In English

@The100volvo 4 месяца назад

Satisfação por ter instalado um compressor fabricado no Brasil

@wesrurede 5 месяцев назад

You are a perfect candidate for the carbon felt pad used to protect from welding and I'm sure brazing. You'll still need the regular wet cloth to cool. I was amazed it was able to protect whatever I put under it when Arc Welding.

@MichaelBeeny 11 месяцев назад

I'm amazed it's cost effective to replace the compressor and re gas with hours of labour on a very old freezer. I note the old gas was let into the atmosphere. That's not allowed in many countries.

@forevertechenglish 11 месяцев назад

Yes Inverter compressors work on variable frequency drive, which makes them to adjust the speed of the compressor using control boards. Also they can be smartly Used with thermistors to control the refrigerator temperature, Well I checked one of your video too. You are doing good work to. Appreciate your work too.

@liquidsoftpc 11 месяцев назад

in their country it is much cheaper to repair the unit rather than buying a new one.

@forevertechenglish 11 месяцев назад

Yes it do is..

@johgude5045 11 месяцев назад

what he does is illegal everywhere on this planet. He MUST not release the R134 to the atmosphere

@lazynur1170 11 месяцев назад

@johgude5045 you can give him recycling machine, he can't afford it

@smvwees 11 месяцев назад

Last week my fridge totally gave up. I figured it would be the relais and compressor like in your vid. But since i didn't have all the equipment and knowledge you have, i figured to buy another fridge and let them take away the old one. In contrast to the fridge in your video, mine was pristine from the inside, no filth or stains or anything. I actually hope they refurbish my old one at the depot, since there is already enough waste. Also i am glad there still exist simple fridges that don't have bluetooth or other of those electronics inside. (Unfort. not with washing machines. I can't find a single washing machine anymore with a mechanical clockwork cylinder inside. All bleep bleep electronics now). Keep up the good job!

@joeds3775 9 месяцев назад

You can rip the beep beeps out and replace it with older system, or an Arduino

@dolorescamacho1241 5 месяцев назад

Check out Speed Queen washers.

@user-kj9lt8of1f Год назад

Всё правильно, ты молодец! Very good 👍

@micropower8 Год назад

If you are measuring the temperature, then go closer to the object. Many sensors have a 30° opening, this means that the sensor-area is around 30cm if you have a distance of 30cm. The laser there is only good to see were is the center-point of this circle. Some sensors have a focal point of 1:12 (2.5cm point at 30cm distance) or some very good with 1:60. Many people are doing it wrong, because they think that the laser itself is the measurement-device. And the surface what you want to measure should be black. If I measure a aluminium surface of a heat-sink, then I paint the surface black with a permanent marker before the measuring. If the black area is only 1cm in diameter, then I use only a distance of 1cm.

@forevertechenglish Год назад

Oh that's a new thing, thanks man

@reddragonflyxx657 10 месяцев назад

@@forevertechenglish IR thermometers are pretty neat. The one I have uses 2 or more thermocouples to measure the temperature-one exposed to light from the outside and the other not. The temperature difference indicates how much IR light is hitting the sensor. Lenses focus the light, so there's a focal distance where the measurement area is smallest, and getting closer or farther away makes it bigger (think of a magnifying glass focusing sunlight). The manufacturer generally tells you how large the measurement area is for each device. You're measuring the 4th power mean temperature of the measurement area, so if you measure something half hot and half cold the thermometer will show a reading closer to the hotter temperature. The IR emissivity of many materials is >0.9, but certain metals are a common exception. This pretty much means that those metals with low emissivity emit a small percentage of the IR radiation an ideal black body with emissivity 1 would. Such materials often reflect IR, so you're likely to measure the temperature of the reflection and the IR mirror you think you're measuring.

@Optimuseq 9 месяцев назад

Instead of using that type of sensor use thermocouple - simple :)

@micropower8 9 месяцев назад

@@Optimuseq - Yes, this would be more easy, you only have to get a contact with the other material.

@Optimuseq 9 месяцев назад

@@micropower8 more precise

@karlslezak 11 месяцев назад

Checking for excess oil in the evaporator is a very in important step. Good he emphasized that

@forevertechenglish 11 месяцев назад

Great point!

@Tosheto666 Год назад

great video again mate , thank you for the knowledge

@forevertechenglish Год назад

Thanks

@howardsimpson489 9 месяцев назад

I had several old fridges that had rusted compressor pipes and all the R12 had gone years ago. The compressors still started and ran okay. I replaced the rusted bits with brazed copper pipe. I the pressurised the system with fuel grade LPG (propane butane mix). I then let all the gas out again and did this several times. As I refilled I watched the compressor current which did not get up to the rated current on the compressor label. Ice started to form on the suction side so I bled gas off until it stopped and then a bit more. After the fridge had come down to temperature, a little ice was forming again so I bled off a bit more. Two of those fridges are still okay ten years later,.No vacuum pump, no gauges, no oil change, no capillary change, no problems, lower power use, shorter running cycle just LPG highlighted on the label. Not illegal to bleed LPG to atmosphere. Most domestic gear chucked out can be home repaired.

@rearspeaker6364 9 месяцев назад

problem is, that the fridge maybe become a BBQ one day.........

@jannejohansson3383 11 месяцев назад

Extremely good video, I have old rounded fridge or cooler, what ever it is and want to use it it, but old compressor is working, but for sure, no forever.

@aleks7064 11 месяцев назад

we still have compressors from Zil Moscow refrigerators, produced in 1971. I installed it on the freezer and filled it with freon R134a. video can be watched on my channel, there is even with English subtitles.

@OilandGasInformation 11 месяцев назад

Thanks for sharing your knowledge. Keep it up

@forevertechenglish 11 месяцев назад

My pleasure

@tronixfix 11 месяцев назад

Yesterday i convert R600 fridge/ freezer to R134a. Had to change condenser, compressor and filter drier. Also shortened the capillary tube, now freezer compartment is at -25C and fridge compartment at 4C. Pressures when saturated are 5psi on low side and 120psi on high side.

@forevertechenglish 11 месяцев назад

Thanks for the info

@forevertechenglish 11 месяцев назад

@@el1Mundo on what basis??

@kareemhameed4042 10 месяцев назад

Can you explain why you shortened the capillary?

@tronixfix 9 месяцев назад

to reduce restriction, with tube in original length the high side was getting too much and the low side went into vacuum@@kareemhameed4042

@DIYHelper 11 месяцев назад

Use a pressure regulator for the N2. In Romania these are delivered with 200 Bars. I would really not feed the circuit with this pressure. Regulating pressure by tapping on the valve is just insane. You are only regulating the flow, if the system is not open you can build up that pressure in the circuit....

@rolanddejesus8685 10 месяцев назад

thank you very much sir for sharing,God bless.

@forevertechenglish 9 месяцев назад

You are very welcome

@vWhiz 12 дней назад

Amazing explanation and hand work. Thanks for this informative post.

@mbahcarrier1629 6 месяцев назад

👍👍👍👍... Pekalongan, Jawa Tengah, Indonesia 🙏

@mohamedomara8631 10 месяцев назад

انك مبدع حقا استمر فنحن نتعلم منك الكثير 🤍

@mazharaltaf4899 Год назад

Very well explained. Thanks

@forevertechenglish 11 месяцев назад

Glad it was helpful!

@takischaros8469 Год назад

Congratulations... regards from Athens Greece...

@forevertechenglish Год назад

appreciated

@TodoFrigorista Год назад

Saludos cordiales desde Argentina

@waynescammell443 Год назад

Nitrogen regulator or you may no longer be with us

@forevertechenglish Год назад

I use it everytime, but I knew no high pressure was required in this case.

@a123clim 11 месяцев назад

😅😅😅😂😂😂😂😂

@jordenb9469 11 месяцев назад

Ahahahahahahah. You think safety is on the list for overseas guys. He probably doesn't have one. Things are not easy to get don't forget.

@TheGamerFiFtIn 11 месяцев назад

He works like someone who has no fucking idea , saw someone doing it and did it

@joeds3775 9 месяцев назад

@@forevertechenglish your confusing of flow and pressure is dangerous.

@Pirelli. 10 месяцев назад

Very interesting vids! Thanks! ☺👍

@ajayrathod9804 10 месяцев назад

Thank you🙏 nicely explain.

@robertonicolosipiva2646 Год назад

Que serviço de primeira congratulations from Brazil

@forevertechenglish Год назад

Obrigado

@pauloeduardo9604 Год назад

Muito bom esse serviço. Pra fazer a nova carga de R600 poderia ter calculado 40% da quantidade original de R134. Isso é o que usam em média. Abraços do Brazil.

@forevertechenglish Год назад

Obrigado, meu querido irmão. Agradeço seu comentário do brasil

@carlosm4806 11 месяцев назад

Not only the comments but also the compressor is made in Brazil 😂

@forevertechenglish 11 месяцев назад

@@carlosm4806 yep that's true

@franciscoferreira-eh1yu 9 месяцев назад

@@carlosm4806honest i think all thos video is made in brazil just with english narration

@t0nito 5 месяцев назад

@@franciscoferreira-eh1yu Nope, those plugs aren't used in Brazil, those plugs are used in India and some African countries.

@TheLoveworldwide Месяц назад

thank you for your good explanation

@forevertechenglish Месяц назад

Glad it was helpful!

@babaolowo35 7 месяцев назад

THANK you

@ebozofred6032 Год назад

This my best work that I learne for three years in school please any looking for a job in this settle..

@joeabad5908 Год назад

This dude know what he is going.. Appreciate your efforts in sharing us this video.

@forevertechenglish Год назад

I appreciate that!

@mrgcav 9 месяцев назад

No he is wreckless and dangerous. He built a bomb.

@johnpavan6431 9 месяцев назад

wrong...not supposed to vent refrigerant to the atmosphere. This guy should be fired.

@MrJugNut 9 месяцев назад

OMG the amount of dust in that fridge is totally off the charts. I cleaned out my desktop gaming PC after 2 years of daily use & it had only a fraction of the dust that fridge had.

@aleksandersats9577 9 месяцев назад

No he does not. Dude let straight up refrigerant into the atmosphere...

@pedrogimenez3127 9 месяцев назад

El desplazamiento volumétrico debe ser similar para ambos compresores ,de otra manera puede quedar una presión de succión muy baja lo que dañaría de forma prematura los flappers....no se si aplica para un inverter

@frk380 11 месяцев назад

Great job

@zodiacfml 9 месяцев назад

nice video clips, showing well what is going on. the narration/translation is also very good! the technical skill of the person is also good. i'm impressed with this video which appears to come from Pakistan, if I'm not mistaken.

@toddt6730 Год назад

Very talented

@EJEuth Год назад

That final part, about condenser length and refrigerant type (and their boiling points) you mentioned at the end is not clear to me. Maybe you could prepare another video about these fluid conversions and the impact their properties could have inter original installation. Thank you!

@Somanathan-hj7ge Год назад

Sir, you are practical as well as theoretical,,and thinking person, perfect tidy job, perfect job done, awasome job sir,

@forevertechenglish Год назад

Thanks

@georgetsetsakos6088 Год назад

love the smell of vented refrigerant! YUM. Very entertaining vid!

@forevertechenglish Год назад

Thank you 😋

@kareemhameed4042 Год назад

Is the change compressor a higher one or the same 1/6 of the danfoss?

@kryzantem 5 месяцев назад

Thanks a lot for this, really cool explaination ! Quick question: Don't we have a simple equivalent factor between R600a and R134a ? Basically we are not extending or shortening the length pipes significatively so why can't we just use "original manufacturer R134a weight" X (standard_equivalent_factor) ? Cheers !

@muhammadshahin3056 11 месяцев назад

Which Meter did you used to measuring live voltage,current..

@anthonyfindlay466 Год назад

You need a nitrogen gas regulator, but you still did a fairly good job.

@forevertechenglish Год назад

Thank you

@avnerabulash Год назад

There are no subtitles in Hebrew.

@NzelumChukwuebuka Год назад

You might require a regulator and pressure guage to be able to show the pressure supplied to the system, something around 15-18 PSI should do

@kareemhameed4042 Год назад

@@NzelumChukwuebuka only industries na em dey use this nitrogen flush system. For naija here, we make use of cooking gas (LPG) very good than nitrogen.

@NzelumChukwuebuka Год назад

@@kareemhameed4042 you mean use LPG for flushing? I never tried that, I use Nitrogen, I only use LPG + Oxygen for the brazing. LPG is highly flammable and high risk. I know of using Paint Thinners for flushing as well

@HadrienDorfman 8 месяцев назад

hey! thank you! really :))

@vrv2781 5 месяцев назад

Good tutorial

@roco9063 11 месяцев назад

R134a has an gwp of 1430. 3,50kg of r134a is equivalent to 5t of co2 👌 A car dose 380 kg of co2 in one year

@lyrapkfvl4374 9 месяцев назад

more globe warming I don't think there's that much in it. So he only filled it with 80g of R600 maybe a double or tripper would have been there. think 200-300g r134a (my car only contains 700g r134a)

@hannes8004 11 месяцев назад

what is the solder stick you use? is it normal solder or a spezial thing?

@alieshghi6743 9 месяцев назад

Very instructional video. Very well done. Sir, about charging the system would have a different way so we dont have to wait this long? In our field, we cant spend so much time on one call. Thank you

@BPantherPink Год назад

This is the first vdo I am watching of yours... Very well videographed AND explained. The voiceover does not sound computer generated at all. Loved and subbed 👍

@mickwolf1077 Год назад

How does the voice not sound CG? The tone emphasis is all wrong

@jameswyatt1304 9 месяцев назад

@@mickwolf1077 as is the timing and several word choices. Understandable, but obviously very CG.

@kettogeerman174 7 месяцев назад

Either you are a liar or a thief! You can just like that change a "System" from one refrigerant to an other. There are factors that you Must keep in mind. There is a big difference in pressure between R-134a and R-600. Stop fooling people. No any time you have Not shown the pressure. Don't give me no "Damn" temperature, give me pressure. Why have those who invented the refrigeration system used 2 guages? ? ?

@oitajaiense 5 месяцев назад

Compressores Embraco, Joinville SC Brazil 😊

@jaybird7534 4 месяца назад

After frig compartment meets 34 degrees do a frost-line adjustment charge on all small converted critical-charge cap-tube systems needing more or less gas than data plate indicates.

@uiopuiop3472 Год назад

i love. the r600a refrigerant gas

@natjzam Год назад

Good video but please recover the old gas don't dump it to atmosphere!!! It makes so much damage to the environment

@amplituhedron5582 11 месяцев назад

And where do you think the "recycling center" is in those places?

@markae0 11 месяцев назад

The gas can be resold to customers.

@inf0scav 11 месяцев назад

@@markae0no, it can't, there is ambient air in the coolant recovery line, so the recovery cylinder has air-moisture-coolant mixture, not pure coolant, you can't sell that to customers, it will ruin their appliances, and you can't flush the recovery line without releasing coolant to the atmosphere. One could've vacuumed the recovery line, but it's essentially open-ended, the pipe tap is unlikely to hold the vacuum. The recovery center could've ran a cryogenic drying and separation of the gases, however, the volume is unlikely to be large enough to make it economical.

@ruthdoyle9085 9 месяцев назад

R134a is used in many spray cans as the pressure (hairspray used lpg) like in keyboard air sprayer. So 134a gets blasted into the air all the time. Keep in mind, all these domestic refrigerants are less harmful than throwing chlorine in your pool, or the chlorine in your tap water...

@douglaswegener6463 9 месяцев назад

@ruthdoyle9085 or floride in our water or toxic industrial waste in our food. Medicine is made of industrial waste coal tar

@XavierBetoN 14 дней назад

This video is more educative than the brain-interface program installers in the Matrix. Thanks dude!

@TheBlairHouseProject 10 месяцев назад

Great video! Very helpful and a good explanation of the process. I understand English is not your first language, so some future help for your English translations 🙂: It is not "smoke" coming out of the vacuum pump, it is moisture/steam. Smoke in English is just associated with something burning. The "Pinching Pin" would be better called the "Piercing Pin". It is penetrating a hole or piercing in English. Pinching is just to squeeze something together. Keep up the great work! You have a new subscriber!

@forevertechenglish 10 месяцев назад

Thanks it will help me alot🙏☺️

@markkennard861 4 месяца назад

Yea.. The gas is not 0ne hundred thirty four A... You could shorten the video if you just said 134a. Are you using a translation to engrish ?.. oops i mean English.

@TheBlairHouseProject 10 месяцев назад

Please add more detail on the differences in the drier/why you are changing it, where and how you purchased the compressor/drier, what tools you are using. what kind of torch, type of flux and solder, how to safely use the compressed nitrogen, etc. Perhaps a video especially for that?

@un65tube 5 месяцев назад

Good explanation! Thank you. Would be good if there would be a way to prevent the old gas from escaping to the atmosphere as ist is hazardous for the environment. Greetings from Germany.

@williambrennan5701 4 месяца назад

I literally do the opposite here in the United States and replace r600a with 134a. I'm thinking about using r401a (yes 401 not 410) It was made as a replacement for r12 . R12 is about 30% more efficient than r134a so that should lower head pressure.

@franco1974ism Год назад

gracias por los subtitulo,me he subcrito a tu canal

@forevertechenglish Год назад

gracias, querido

@Ricardo90 5 месяцев назад

Amigo, sempre quis saber se é possível usar o sistema de uma geladeira para ao mesmo tempo que refrigera também esquenta água. Seria possível?

@ClaudioVolber 11 месяцев назад

Que legal! Jogou o gás mais nocivo para a camada de ozônio direto na atmosfera! Parabéns!👏👏👏👏👏👏

@ruben_balea 11 месяцев назад

Os HFCs são gases de efeito estufa mais de 100 vezes piores que o CO2 mas não são prejudiciais à camada de ozônio, os que danificaram a camada de ozônio foram os CFCs como R12, R22, etc.

@mwint1982 Год назад

My dude just killed some baby birds when he let that r134a go

@VooDooV6 8 месяцев назад

When 134a was produce it was supposed to be the safest on the planet.......be thankfull it not r12 and the billion refrigerator out there...😮

@whataboutbob7967 9 месяцев назад

try cleaning the coils too, sometimes it helps

@jvc22467 Год назад

What about reclaim of the refrigerante first

@markae0 11 месяцев назад

If you recover the old R-12 or R-134 refrigerant, could you reuse it again (after filtering)? The old refrigerant is very expensive now?

@Drxxx 11 месяцев назад

great video ❤❤

@heyhoe168 11 месяцев назад

Unexpectedly informative video.

@Dennis.2016 Год назад

It was funny when there were flies there and 1 got on my foot just now

@forevertechenglish Год назад

The freezer was filled with meat, as the meat blood was mixed with the water, we open the freezer door and was shocked to see flies inside the freezer, therefore we cleaned it properly.

@davidcohen2682 5 месяцев назад

VERY NICE

@srotovnikabc6919 4 месяца назад

Measure other similar refrigerators. Some refrigerators heat up the windings in this way for about 1 minute, while the motor stops, if the refrigerator was not connected to the mains for some time, and this may not be a fault but a normal operating mode. Other factors decide whether it is also a mistake. Then the power factor of the inverter converter is practically 1, it cannot be 0.6, since the inverter consumption is exclusively active. This is then either wrongly measured, or it is a different misunderstanding in terms.

@laythmajeed3129 3 месяца назад

Did you change the capillary tube size?

@liv7680 11 месяцев назад

A bit more info about wiring specifically how do you control the temperature inside the compartments. Did the new compressor come with a control board? Im looking to restore a very old fridge but haven gotten to it due to high power consumption of the old compressor. I'd like to upgrade to an inverter. Thanks

@andrewgray1949 9 месяцев назад

2:01 It is not legal to discharge the refrigerant to the atmosphere in most countries ! Replacing R134 with R600 is not environmentally friendly unless you pump the old gas into a cylinder for disposal. In the US, illegal since 1995, the fine is upto $37,000 and there may also be a bounty of upto $10,000 for reporting the offence Your RU-vid appears to say United States...

@DarkySabertooth 5 месяцев назад

you vented that stuff to atmosphere?

@HECKAKYH-ADEKBATEH 4 месяца назад

In the box near compressor is startup electronics. Normally there is a Posistor chip, it gives extra energy to kick off compressor then blocks itself. Its probably the only thing defective, small chip.

@mtay65 11 месяцев назад

Great vid.

@mickwolf1077 Год назад

No attempt to recover refrigerant, I thought you were going to when sanding tube.

@ceilingfanmusic6597 5 месяцев назад

Well you shouldn't be venting into the atmosphere of refrigerants. Just because other people do that dose not mean you shuld do it to. There are many ways to recover and make recovery devices. I know many people have been brow beating you for venting but its something that seriously shouldn't be done. Im glad to see people working on and repairing old refrigeration equipment instead of throwing them away tho. I wish people in my home country wernt infected with the throw away mind virus. Good on you for keeping the refrigerator out of the trash. But please if possible invest into making or aquiering refrigerant recovery devices. As techs we are all responsible for not venting into the atmosphere.

@charly-s 5 месяцев назад

The only correct reply to this idiot. Letting out the Flouron into the atmosphere instead of buying a new refrigerator. Thrift at a fully wrong place.

@seanwieland9763 11 месяцев назад

All that dust might be why the compressor failed in the first place! The whole thing is nasty and that pressure washer was sorely needed.

@user-wf6gq2mm7i 8 месяцев назад

اشكرك مهندس لكن لم يتم عمل إعاقة لفريون 600 ما السبب ؟ام أن إعاقته هي نفس إعاقة 134؟

@silktariq 11 месяцев назад

Awesome.... ❤

@forevertechenglish 11 месяцев назад

Thank you! Cheers!

@mohmedahmed-vw2us 11 месяцев назад

Thanks

@forevertechenglish 11 месяцев назад

Welcome

@katriyanto8687 9 месяцев назад

waduh rangeri artine 😁😁

@TedT56 Месяц назад

Section 608 of the Clean Air Act The law prohibits anyone from "knowingly venting ozone depleting compounds used as refrigerants into the atmosphere while maintaining, servicing, repairing, or disposing of air conditioning or refrigeration equipment." Violators can be fined up to $25,000 a day for non-compliance.

@user-yi1dx3ei9l 8 месяцев назад

مرحبا لم أفهم كيف سيشتغل الضاغط العاكس في ثلاجة عادية

@eduardoamor1753 6 месяцев назад

You have acetylene,pressure washer,vacuum pump!,don't have nitrogen regulator?😂😅

@DandyDon1 9 месяцев назад

I hope this variable speed compressor is better than the one LG manufactures, as they are still having problems with them failing.

@VooDooV6 8 месяцев назад

Have you ever thought of converting to an old school 134a compressor,,relay start....these lg Compressors are shit😂

@firasbachour7325 4 месяца назад

Had you ever replace a constant speed compressor with an inverter one with all electrical and control circuit?

@MyGoogleYoutube 6 месяцев назад

Is there any point to flowing nitrogen through the system while you braze? Can you ?

@MuhammadAshraf-sy8jw 11 месяцев назад

Nice job

@forevertechenglish 11 месяцев назад

Thanks!

@isettech Год назад

Did you know that venting refrigerant to the atmosphere is a crime? It is required to be recovered per EPA 608.

@forevertechenglish Год назад

Yes, that's true.

@HydrarDraconis 11 месяцев назад

Yes, this is horrible advice and you should not show this in a a video, you inspire others to do the same, amount of environmental damage from venting that refrigerant is more than you'll ever save from installing the inverter compressor. At least rent a recovery unit and recycle the r134A

@forevertechenglish 11 месяцев назад

Hope To get one in the future, And yes I would not recommend anyone to vent the refrigerant. As I don't have one. I had to vent to fix the unit.

@sandipsengupta1832 11 месяцев назад

It seems to me that there was not much R134a left in the unit, since there was only a very brief hissing noise when the line was cut, so comparable to the 'minimis' release allowed by epa, even if technically illegal.

@zibbybujno5452 11 месяцев назад

EPA has no jurisdiction in India, just saying 😂😂😂

@tbone6354 4 месяца назад

A very helpful tip to extend the life of the compressor is to add 50ml of sulphuric acid to the compressor before regassing. This reduces corrosion

@kareemhameed4042 Год назад

Can you do video about condenser conversion for both scenarios of r600a and r134a, please? Many technicians will benefit from a great teacher like you.

@FKmechofficial 10 месяцев назад

Appreciated

@FKmechofficial 10 месяцев назад

Appreciated

@TheBlairHouseProject 10 месяцев назад

Yes, please add more detail on the differences in the drier, what tools you are using, type of flux and solder, how to safely use the compressed nitrogen, etc. Perhaps a video especially for that?

@joels7605 5 месяцев назад

Excellent work. Where did you get the compressor and inverter to drive the compressor?

@forevertechenglish 4 месяца назад

I got it from a local compressor vendor

@s58015 6 месяцев назад

Eu tenho um freezer antigo da Electrolux sera que consigo trocar o motor dele pra inverter ?

@wanderlimacoutinho4487 Год назад

Curiosamente aqui no Brasil estamos fazendo o inverso retirando o compressor r600 e substituindo pelo r134a por motivo do compressor r600 travar muito em pouco tempo. Agora por curiosidade esse embraco é fabricação aqui do Brasil?

@forevertechenglish Год назад

Oh, que interessante saber, você remove o compressor inverter r600a ou o compressor normal? Pois instalei um compressor inverter r600a da embraco, que está funcionando que nem uma fera nessa geladeira. Não sei onde é fabricado o compressor.

@tuvoca825 4 месяца назад

EPA rule on R600a from their website: "The Final Rule: Revision of the Venting Prohibition for Specific Refrigerant Substitutes exempts... isobutane (R-600a) and R-441A in household refrigerators, freezers, and combination refrigerators and freezers, and propane (R-290) in retail food refrigerators and freezers (stand-alone units only)." Butane and propane are not illegal to vent... just highly flammmable/explosive. Be careful. Think more about safety on these.

@cannon8170 7 месяцев назад

Why must you crimp end? Can you leave service valve on?

@engineerirfan 11 месяцев назад

NICE ❤

@Flip-Flop-Rio 5 месяцев назад

Ela fica mais economica em ralação a gasto de energia?

@forevertechenglish 5 месяцев назад

Yep, because it consumes less energy then a conventional compressor, and is variable

@a.k.mjahangiralam1004 11 месяцев назад

I think you should adjust the flame of welding torch nicely. Moreover, you have done a decent job.Thanks.

@forevertechenglish 11 месяцев назад

Thanks for the tip

@BlondieSL 11 месяцев назад

Actually, the manufacturer of that compressor, on their site, suggests to NOT use flame at all. They have special fittings and tools to do the job without flame. R600 is highly flammable, because it is, after all, BUTANE! You know... like in lighters and camp stoves.

@forevertechenglish 11 месяцев назад

And actually few people knows how to deal and work on such stuff.

@BlondieSL 11 месяцев назад

@@forevertechenglish That is very true! Which is why those who do not know SHOULD NOT attempt! Agreed!??