I Printed The Perfect Fume Extractor

Подписаться 39 тыс.

Просмотров 777 тыс.

50% 1

happy holidays
FILES:
KIRBY:
www.printables.com/model/3483...
MODEL 302:
www.printables.com/model/3484...
Kirby sucks. So do fume extractors. You do the math.
Music:
Kirby squeak squad OST
Follow my socials:
Instagram: borge_design
twitter- / borgey5
thingiverse- www.thingiverse.com/borgey/de...
Like subscribe all that stuff
My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Хобби

Опубликовано:

30 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 469

@askquestionstrythings Год назад

Kirby Vacuum adaptor for the win.

Год назад

I just have to ask, how well or bad would just using the vacuum when soldering work? Will it kill the vacuum? I guess the filtering is actually really sort of good, especilly with a full bag :)

@howardjones543 Год назад

@ bit noisy and 300+ watts instead of whatever tiny amount a PC fan uses, silently, though 🙂

@IanSlothieRolfe Год назад

@ I don't think something that can suck up the dust from your floor is going to complain about the smoke from your soldering iron - its just burnt flux. Contrary to what people believe there isn't any measurable metallic content unless you have your soldering iron set to several thousand degrees. I would think like Howard that the problem would be the noise and power use.

@u_ogaming166 Год назад

Vacuum adaptor 💀

@nathanstafford8412 Год назад

I need one

@fgregerfeaxcwfeffece Год назад

The perfect Kirby fume extractor also includes a whistle that makes the correct noise while the fan is spinning.

@rayakoth Год назад

*Wet slurping noises*

@kingminceraft9487 Год назад

bitcrushed waAAAA

@FPSRayn Год назад

@@rayakoth broo 💀

@Official_ViperYT Год назад

WAAAAA

@geckoo9190 Год назад

Well yes, but then how will you focus on your job?

@MichaelMueller042 Год назад

It would be nice to have some light in the mounted fume extractor pointing to the soldering place. I like your models and the idea of 3d printed screws for the grills.

@zellfaze Год назад

The mounted one made me think of Glados. Love the idea of using Kirby as an extractor though, that really is too good an idea to pass up.

@kakyoindonut3213 Год назад

Man I love it when Glados suck my...

@flyingpiggles1034 Год назад

I instantly thought of portal too, but the personality core instead of glados. Either one would be kinda cool, though nowhere near as thematically fitting as kirby

@heckensteiner4713 Год назад

The cake is a lie...

@guidoalejandrochavez9818 Год назад

@@flyingpiggles1034 Whitley

@procellae6572 Год назад

@@guidoalejandrochavez9818 the intelligence dampening sphere if you will

@angeryanimal398 Год назад

the "how its made" style zoom @ 6:30 was beautiful

@Josuh Год назад

6:29*

@MagnumForce51 Год назад

Missed opportunity to make the second model just another Kirby that is "hanging" off the arm. :P There would be more of challenge finding a way to give it the same amount of movement as the standard design you ended up making but I'm sure it's possible. :D

@user-vr1zc6tz9n Год назад

the problem isnt the movement. the problem is actually modeling it. Even with preexisting design, editing models can be challenging...

@Oretal Год назад

You are so cool for using the Squeak Squad OST Also both versions of the build are so dang good!! Kirby is an easy design but getting him to actually look like himself is a bit tricky so you did a great job designing him. Also good thinking to recess parts of the eye down to make painting easier. I really like how the boxy design looks. So cool, I’d want that as a small fan at my desk tbh. Great video!

@Eta_Hoyimi Год назад

Squeak squad master race

@louisgrissman4857 Год назад

@@Eta_Hoyimi HOORAH

@Oretal Год назад

@@louisgrissman4857 HOORAH

@Hermis14 Год назад

I think the most important point about the fume extractor is how efficient it is. It is cute but if it does not filter smoke adequately, I would say it is just a decoration.

@darkracer1252 Год назад

it's more of a fume spreader because he uses the wrong filter material. filter is for water for a whole other application. i mean you can freaking see through it and he thought it would filter nicely... (plus an extractor would have a hose and the fumes after filtering would be ejected to outside)

@IsoMacintosh 10 месяцев назад

@@darkracer1252 Proper extractor is not a solution many hobbyists can do, this seems quite useful to move the fumes away to avoid them being breathed in.

@darkracer1252 10 месяцев назад

@@IsoMacintosh no shit sherlock. however that was not the point of my comment was it?

@Mattscalf Год назад

I love how the fume extractor, extracts fumes to the same room just slightly behind wherever the fans pointed😂😂

@kirosun Год назад

Its just so that the smoke doesnt go directly into your face, which is what happens if you dont have a fan. seen here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-exRgzJaB3D4.html

@lilman227 Год назад

I’d like to imagine that you could make a mount for Kirby to make him practical too

@DeadEye428 Год назад

Like…. A warp star board for him to fly on?

@NDR008 Год назад

Love the beauty and function combo of your designs!

@frank.conway Год назад

The animation for the large fume extractor entering the scene was really well done!

@AlexUnderBase Год назад

Amazing video ! Thank you , Chris !

@HardCoil Год назад

Thanks, I've got that huge one as well, and never use it, so this is perfect. With regards to efficacy, it's all about concentrations. Using this in an enclosed space is probably orders of magnitude better than breathing in that little white smoke trail, which is what always seems to happen to me :(

@caddyguy5369 Год назад

I hold my breath.

@MissyMona Год назад

Weird, there's a kirby fume extractor with the exact same design at 1:23, are you sure it wasn't the idea you got? XP

@Lapisofdoom Год назад

I was just gonna ask the same thing

@applecored Год назад

me 3. I instantly saw that other kirby one and thought the same thing

@nick-firstest Год назад

Beautiful, smart and detailed as always

@SetTheCurve Год назад

That filter is not doing much beyond making you feel like you’re protecting yourself. It’s just helping diffuse the smoke so it appears like it was adsorbed when it wasn’t.

@dafelix Год назад

1:22 "I decided to desing my own one, and I definitely did not just copy that one Kirby fume extractor that I just saw"

@thecyphers8588 Год назад

was about to say the same thing

@yarr0 Год назад

This is amazing!! Great idea, and great execution.

@jreen58 Год назад

Awesome fume extractors! I love the kirby one, but the one with the arm seems way more useful to me.

@doron910 Год назад

So sweet. Edited really good as well.

@jomo4751 Год назад

This is awesome! Love it!

@imaginationsquare Год назад

I just got Kirby and the Forgotten Land today for New Year so this is just amazing!

@Moesh_Jalone Год назад

I think it would be cool if you did a portal core version too!!

@eldestisland4520 Год назад

That was a wild effect with the fume extractor at the beginning

@CrazyCat229 Год назад

That is the best fume extractor ever! SO cool!

@star-aether Год назад

Love the use of some of the music from squeak squad!! Most nostalgic game for me :)

@-robo- Год назад

I like the "vacuum" version (for use as a regular fume extractor) as I will be able to add activated carbon in the vacuum adapter part.

@lzy2 Год назад

WAIT HE ACTUALLY SHARED THE FILES FOR IT?! YES! I'm gonna work with circuits soon and this is HILARIOUS and helpful.

@yoarnaldo Год назад

So perfect! I need one of these.

@sir_christmas_leopold_duckson Год назад

Well, I can tell my devices are listening to me again. I was just talking to my brother about doing a 3D print of Kirby since I just bought a multi pack of PLA that came with pink. Thanks for sharing the files. Both the Kirby and the model 302 would be ideal for the work I do.

@tommyle628 8 месяцев назад

hey your project is very inspirational, I'd add one more thin filter paper, the kind they'd use in the air purifier, it helps prevent the smoke from coming out a lot

@neerdsrule Год назад

Saw this in my feed, just had to stop by and say this is AMAZING!

@cristoferxdd Год назад

Perfect to the Stop-motion

@alexxustube Год назад

Best fume extractor design ever! 😎👍

@josefix1987 Год назад

the idea is practical and has an interesting design. good luck

Год назад

This was awesome!

@nikenbole Год назад

Google tracking is good. Saw this on printables last night and now i got your video in youtube :) Perfect

@IanSlothieRolfe Год назад

I think I'd like one that was a touch bigger, using a 60 or 80mm fan, but that doesn't look like it would be too hard to do and would perhaps give room for a HEP filter too. Sounds like an excellend design project.... Hmm what about a Garfield Lasagne filter or a Scooby Snack air filter... :D

@Daiceto Год назад

the one at 1:21 by KnoppersDE uses a 60mm fan

@thomascriviera5779 Год назад

Hi, if you really like the design, you can just scale the parts in a 3D slicer to make it twice as big. Just make sure you remember to do that with all the part when you put them in Cura, Cubicreator or whatever you use to slice ;)

@qdo7854 Год назад

love this!!

@mart182003 Год назад

The Kirby anything is dope.

@Maneyax Год назад

"its too big, and for a lot of people that's probably a good thing" best quote in the video.

@serpentinious7745 Год назад

"But what if Kirby?" The question we should all be asking

@Der_Kleine_Mann Год назад

This is so cool. I gotta get some piggy colored PLA now. Thanks for sharing the files👍

@chinemapictures Год назад

Awesome! I had no idea what a fume was before this video

@jujushotta13 Год назад

Beautiful

@themaddhatter5686 Год назад

Man this is so cool!

@squidfeet7278 Год назад

So cooool, love the vid

@Foxhood Год назад

Idea behind a "front filter" is that a Fan generally has a easier job pulling air through a obstacle, than pushing through one. In practice this difference is pretty small (unless the fan has some shoddy construction to keep somewhat of a seal on either side), but for fume extractors every tiny bit is squeezed out of it.

@JCthe1maximus Год назад

Absolutely love it, could you possibly share the STL for vacuum adapter as well?

@cameron2528 Год назад

It's beautiful.

@yukirevive2722 Год назад

Turn Kirby's arms into swingarm mounts, point his feet downward and add a cape and viola, best of both worlds. A practical arm-mounted flying Kirby fume extractor.

@isaacwalmsley139 11 месяцев назад

This is incredible. 🤯🤯🤯

@arminth Год назад

So good, I needed to subscribe!

@BadgerRobot Год назад

Sweet design!

@madmachanicest9955 Год назад

You should update this build to connect to a small hose and vacuum pump so you can vet the gas out side

@fifthtyp3 Год назад

Yea. I don't trust indoor units at all, not even the 1k hakko. Best to have it exhaust outside after being filtered

@DaveGamesVT Год назад

I love the Kirby one.

@LegorocketsAnimation Год назад

If you want to completely eliminate paint, design the eyes so the blue, white and black sections are at least 3 layers apart from each other, and use layer-based color changes. In case you don't know, PrusaSlicer has a feature where you can tell the printer to stop on a specific layer and manually switch the filament colors.

@OccasionalHaHa 8 месяцев назад

Congratulations on getting into MAKE magazine!

@crimsama2451 Год назад

You could probably model a crane(like crane games) arm onto kirby as a mount, and even add an LED light onto those arms to add more functionality.

@memphisartguy2 Год назад

Would suggest going up one difficulty level and going ABS on this one as you can smooth the prints via vapor chamber (don't expose the treads). And then swap the pain to ABS dissolved in acetone. I'll looks less cheesy than the paint. This also could be done to smooth the parts verse vapor chamber.

@ulrichkalber9039 Год назад

the hose comeing from that vacuum kirby gives me an idea: the filter of the extractor does not need to be directly in front! if you place a hose directly over your soldering place the other end of the hose could be having a large filter, and exhaust to outside of the room. you could even use a noisy fan if it is far enough away. the only thing you would need is an arm that holds the end of the hose in the right place and orientation.

@samuels1123 Год назад

So basically, a dust collector arrangement, but for really fine dust

@tobywolf64 Год назад

I just needed 15 seconds. I'm already subscribed.

@CJICantLie Год назад

I now also want Kirby speakers. Your vacuum attachment brings new meaning to Kirby Vacuum Cleaner.

@haruhisuzumiya6650 Год назад

Mouthful mode sound

@mr.muffindan.m3367 Год назад

this is awesome

@HarrisonBorbarrison Год назад

That is so cool!

@alfadex50 Год назад

That is really smart!

@ShiaraMoon Год назад

I would argue that the Kirby vacuum nozzle is extremely useful as it brings joy to anyone who decides to use it.

@BayGamerTV Год назад

I love how this is made in christmas

@ShankMods Год назад

Great video! I've had the Kirby fume extractor floating in my head for a few years, but never got around to designing and making it. Your model is great, once you upload the files, I'd love to make one!

@davelordy Год назад

I like this, I like that you made this, the world is a slightly better place now.

@scraub8913 Год назад

Wonderful

@Blackraven6 Год назад

1:22 There's actually a Kirby one right here) Mid bottom.

@friendlynerd599 Год назад

man those leaded solder fumes did a number on my brain

@TheRealStructurer Год назад

Nice video 👍🏻 Thanks for sharing 👍🏼

@Extner4 Год назад

You are right this is the perfect fume extractor

@mark6302 Год назад

Kirby needs more love these days

@TritonTv69420 Год назад

Thanks man. Just bought an Elegoo neptune 2s. I have been downloading so many files for things to print when I get it. I have wanted a printer for like 7 years now just kept putting it off.

@ClannerA01 Год назад

If you didn't have a filter, that kirby's probably enough to pull air out of my 1'x1' workarea (it's a floor tile). Been using one of those tiny USB fans for the light soldering i do (i built/flew drones as a hobby) so i don't think i'll need a filter. Nice idea.

@coilockerfpv Год назад

I love this so much

@Caldoric Год назад

Pretty sure having the filter in front of the fan helps slightly keep your fingers and stuff out of the fan blades.

@crisnmaryfam7344 Год назад

Neat Idea. Ironically a bigger version could be fitted with a 3 part filter so you dont need the well ventilated area part. Thats one thing those bigger Very expensive ones have.

@talkysassis Год назад

Some upgrade considerations I think it would need to be bigger, but you can put a slot for an AA battery.

@pickyyeeter Год назад

The Wilhelm scream was a nice touch

@SianaGearz Год назад

Maybe a combination of a charcoal filter and a pleated HEPA filter would work better for filtering. Remember masks?

@crisnmaryfam7344 Год назад

Oooor just buy a 3 part filter (with all that included) that is designed For soldering. That filters all the micro bad stuff you want it too.

@SianaGearz Год назад

@@crisnmaryfam7344 Oh that's good, thanks for telling me. Unfortunately the availability in my region seems... not really there, but i'll keep looking. I was thinking of getting a pleated HEPA filter such as the one from Kärcher VC3 and using it in conjunction with an activated carbon foam from pet supply store. Or outright putting an IKEA UPPÅTVIND on my desk, replacement inserts are only 5€.