Тёмный

What is the LOUDEST 3D Print? 

Maker's Muse
Подписаться 1,1 млн
Просмотров 4,9 млн
50% 1

New Customers Exclusive - Get the Creality Ender 3d pro for $99 after coupon: micro.center/569ec6
Check out Micro Center’s 3d printers and filament: micro.center/75d994
Browse Micro Center’s Amazon store filament: micro.center/23e0a1
Join the Maker's Muse Community - www.makersmuse.com/maker-s-mu...
Models Shown:
Kazoo - www.printables.com/model/6539...
Ocarina - www.thingiverse.com/thing:275...
Noisemaker - www.thingiverse.com/thing:213343
Bird Water Whistle - www.thingiverse.com/thing:115...
Mayan Death Whistle - www.thingiverse.com/thing:266...
The Orange Screamer - www.thingiverse.com/thing:455093
V29 Whistle - www.thingiverse.com/thing:117...
Telescoping Tube Whistle - www.thingiverse.com/thing:109...
Air Raid Siren - www.printables.com/model/531-...
Join the Maker's Muse Community - www.makersmuse.com/maker-s-mu...
3D Printing Quick Start Guide - www.makersmuse.com/fdm-fff-3d...
3D Printer Buyers Guide - www.makersmuse.com/purchasing...
3D Printing Essentials - www.amazon.com/shop/makersmuse

Наука

Опубликовано:

 

5 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 2,2 тыс.   
@CDRaff
@CDRaff 2 года назад
Try the bearing free version of the Air Raid Siren. It printed perfectly for me with no adjustments at all. All you need to add is just a little bit of lubricant and it works great. Super loud.
@MakersMuse
@MakersMuse 2 года назад
I'll give it a shot!
@Tobashadow
@Tobashadow 2 года назад
Could you link it please
@rogervanbommel1086
@rogervanbommel1086 2 года назад
@@MakersMuse please provide a link to it
@z3r0tonine
@z3r0tonine 2 года назад
@@MakersMuse We are waiting, no pressure tho
@hacksolot2
@hacksolot2 2 года назад
link?
@JakeMcIvor
@JakeMcIvor 2 года назад
I was once 3D printing some parts and some very strange and creepy noises started coming from the printer. As far as I can tell, the part cooling fan was causing the parts to whistle during certain parts of the printing. Pretty niche and not that useful, but could imagine designing a part to do this purposefully on a given printer.
@yako0006
@yako0006 2 года назад
I have this happen wuite a bit. Usually on thin walled prints or vases
@danielloo1255
@danielloo1255 2 года назад
A print that goes half an hour, and plays a song with the steppers and by blowing with the fan
@Becvar80
@Becvar80 2 года назад
Happened to me printing the death whistle with an Anycubic Kobra
@matthewskutar5964
@matthewskutar5964 2 года назад
I'll be honest, when I clicked on the video I thought it would be about making loud sounds as the thing was being printed lol
@andrew-729
@andrew-729 2 года назад
@@danielloo1255 the steppers get me groovin, sometimes they throw a sick beat.
@joez9162
@joez9162 Год назад
Hey I’m the designer of the V29. Super cool to see my whistle on this after all that time so thank you! I learned so much from designing it that I’m actually an engineer now and this is what got me started on that path. I really want encourage any aspiring designers or engineers to just design your own parts and go print them! The ability to have an idea and see it come to life is so powerful! It changed my career and my life.
@user-lr9cw9bb3k
@user-lr9cw9bb3k Год назад
Carear? Bro how are you an engineer if you can’t even spell career?
@justinpettit8282
@justinpettit8282 Год назад
@@user-lr9cw9bb3k dude leave this man alone 😂
@joez9162
@joez9162 Год назад
@@user-lr9cw9bb3k fixed. Luckily much better at math than spelling haha
@DarthKanye
@DarthKanye Год назад
@@user-lr9cw9bb3k ever heard of typos kid?
@user-lr9cw9bb3k
@user-lr9cw9bb3k Год назад
@@joez9162 Great design on the whistle man, how old are you?
@robertdevito5001
@robertdevito5001 Год назад
7:29 There's no question that the sound they make, is truly terrifying, take a listen! *ad* aaaahhhhhh!! The horror!
@L14M44
@L14M44 Год назад
Lol I got one too
@SavalioDoesCodingStuff-dd5yb
@SavalioDoesCodingStuff-dd5yb Месяц назад
Same lmao
@antoniomromo
@antoniomromo 2 года назад
The loudest thing you can 3d print is the 3D printer itself. Though they are disqualified.
@Lucas_sGarage
@Lucas_sGarage 2 года назад
specially the ones that the manufacture decided to add delta fans for extra noise
@Blooest
@Blooest 2 года назад
Get better stepper motor drivers. My printers barely break the noise floor in my office, and that's just because of the fans.
@antoniomromo
@antoniomromo 2 года назад
@@Blooest oh I have a near silent Prussa printer. It did not take much to get it there. I have heard some versions of do it yourself printers that are like meat grinders.
@WatsitTooyah
@WatsitTooyah 2 года назад
@@antoniomromo Ender 3 pro steppers were very loud, 4.2.7 motherboard upgrade makes them absolutely silent.
@thomashogg2341
@thomashogg2341 2 года назад
Buy an Artillery SideWinder, I have 3 running in my livingroom and constantly find myself looking towards them to make sure all 3 are actually printing. They really are almost silent.
@Becvar80
@Becvar80 2 года назад
Damn you, Angus!!! I'm printing the Maya Death Whistle on an Anycubic Kobra and the part cooling fan on this blows at just the right angle that it's blowing the whistle AS IT PRINTS, like blowing over the opening of a bottle. It's terrifying!!!
@zombie-process7025
@zombie-process7025 2 года назад
Oh that's awesome! XD
@Becvar80
@Becvar80 2 года назад
@@zombie-process7025 It really was.
@crowdemon_archives
@crowdemon_archives 2 года назад
lmfao so for the entire time it's just screaming then xD
@MrFuzziiWuzzii
@MrFuzziiWuzzii 2 года назад
It was Aztec
@hudzgh
@hudzgh 2 года назад
This is the funniest thing I've heard all week!
@noahcampbell7835
@noahcampbell7835 Год назад
my engineering class did a 3d printing collaboration with a nearby university. it was difficult to turn because of the extreme gear ratio, but it was earsplitting once you got it going. The entire building could hear it loud and clear.
@user0000user
@user0000user Год назад
9:22 You have to blow in it with the most pressure you can generate resulting in a rather short sound but insane loud.
@ggaub
@ggaub 2 года назад
The Mayan Death Whistle was great on Halloween to scare/startle trick or treaters as I opened the door. :) Probably the most fun I've had on Halloween since my kids grew up.
@linuxstreamer8910
@linuxstreamer8910 2 года назад
searched them those things are scary
@coyoteran
@coyoteran 2 года назад
I have one stuck on top of my monitor at work. If I am having a particularly blech day, I reach for the whistle and it does the primal scream therapy for me.
@gizmobowen
@gizmobowen 2 года назад
My kids hate it when I use mine. Not sure why but it does.
@SixOThree
@SixOThree 2 года назад
I printed one for a friend that worked at a haunted house. It was a hit. This video does not do it justice. Maybe it's the stl.
@reinux
@reinux 2 года назад
I wonder how long it'll be before they get banned because the popo keep showing up by mistake😂
@matthewdestefano888
@matthewdestefano888 2 года назад
FYI: The Microcenter deal comes with a $10 off filament coupon packed inside. This brings the cost of the printer down to $89!
@cyan_2169
@cyan_2169 2 года назад
How does the printer compare to other popular fdm printers?
@eideticex
@eideticex 2 года назад
@@cyan_2169 The Ender 3 is a decent model, albeit showing it's age with an 8 bit board. For that cost could replace the board and still save over a comparable printer, but the 8 bit is more than capable.
@stellarbastard98
@stellarbastard98 2 года назад
Now if only Microcenter wasn't America only.
@JimmyPizzaDelivery
@JimmyPizzaDelivery Год назад
@@stellarbastard98 And they only have 25 locations here, might seem like a lot, but it kinda isn't.
@cosmicbrambleclawv2
@cosmicbrambleclawv2 Год назад
Honestly I'm a little surprised how good the ocarina sounds I own a clay one and yours sounds very similar in tone and clarity (and playing lol)
@BREAKCORE-DISSOCIATE
@BREAKCORE-DISSOCIATE 7 месяцев назад
My female manager lead me on for about 2 months then she revealed her boy friend . Yesterday. Bro life is hard. And I just want that flirty big booty latina.
@BREAKCORE-DISSOCIATE
@BREAKCORE-DISSOCIATE 7 месяцев назад
Ima go get a 5th of jack.
@reece674
@reece674 Год назад
That Death Whistle is one of my favourites. If you really give it a hard lung full it is quite horrific like a loud scream. I hid around a corner and blew it just as my friend was coming out of the bathroom. I didn't get much of a reaction from him but not because it didn't scare him, but because his body literally froze with fear haha.
@CrunchyMush
@CrunchyMush 2 года назад
I printed that air raid siren a couple of years ago. Had the same issues with rubbing (particularly the drum part) but I eventually got it running smoothly and sweet jesus is it loud! I've only ever run it up fast a couple of times because it's more than loud enough to elicit complaints from the neighbours even when used indoors. Still one of my favourite printed things.
@jasoneel76
@jasoneel76 2 года назад
How did you get it to run smoothly?
@CrunchyMush
@CrunchyMush 2 года назад
@@jasoneel76 lots and lots of sanding! The big drum part was the only problem but it took a long time to identify where it was scraping, pull it apart, sand it down, reassemble, repeat ad nauseum.
@lukeclayton7578
@lukeclayton7578 2 года назад
Not only loud but how terrifying would it be to suddenly hear a raid siren lol I’d be freaking out
@ravenbailey4088
@ravenbailey4088 2 года назад
@@lukeclayton7578 lol
@Rekkuza-eu6sp
@Rekkuza-eu6sp Год назад
Repent and follow Jesus my friend! Repenting doesn't mean confessing your sins to others, but to stop doing them altogether. Belief in Messiah alone is not enough to get you into heaven - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36). Contemplate how the Roman empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years to accomplish the religion of the Israelites C) History as we know it is fake. You don't really need to speculate though because you can start a relationship with God and have proof. Call on the name of Jesus and pray for Him to intervene in your life. - Revelation 3:20 Revelation 6 1st Seal: White horse = Roman Empire conquering nations under Trajan 98-117 AD & Gospel spreading rapidly. 2nd Seal: Red horse, bloody civil wars with 32 different Emperors, most killed by the sword. 185-284 AD 3rd Seal: Black horse, economic despair from high taxes to pay for wars, farmers stopped growing. 200-250 AD 4th Seal: Pale horse, 1/4th of Romans died from famine, pestilence; at one point 5,000 dying per day. 250-300 AD 5th Seal: Diocletian persecuted Smyrna church era saints for ten years, blood crying out for vengeance. 303-312 AD 6th Seal: Political upheaval in the declining Roman Empire while the leaders battled each other. 313-395 AD Revelation 7 Sealing of 144,000, the saints, before trumpet war judgments, which led to the fall of the Roman Empire. Revelation 8 1st Trumpet: Alaric and the Goths attacked from the north, the path of hail, and set it on fire. 400-410 AD 2nd Trumpet: Genseric and the Vandals attacked the seas and coastlands, the blood of sailors in water. 425-470 AD 3rd Trumpet: Attila and the Huns scourged the Danube, Rhine & Po rivers area, dead bodies made water bitter. 451 AD 4th Trumpet: Odoacer and the Heruli caused the last Western Emperor (sun), Senate (moon) to lose power. 476 AD With the Western Roman Emperor (restrainer of 2 Thes. 2) removed; the son of perdition Popes took power. Revelation 9 Two woe judgments against the central 1/3rd and eastern 1/3rd of the Roman Empire. 612-1453 AD 5th Trumpet: Locust & scorpions point to Arabia, the rise of the Muslim army. Islam hides Gospel from Arabs. 612-762 AD 6th Trumpet: Turks released to attack Constantinople with large cannons (fire, smoke, brimstone). 1062-1453 AD Revelation 10 The little book is the printed Bible, which was needed after the Dark Ages when Scriptures were banned by Popes. Revelation 11 7th Trumpet: Martin Luther measured Roman Church; found that it’s an apostate church, not part of true temple. The two witnesses are the Scriptures and saints who proclaim the pure Gospel and testify against the antichrist Popes. Papal Church pronounced Christendom dead in 1514 AD. Silence for 3.5 years. Then Luther posted his 95 Thesis, which sparked the Protestant Reformation and brought the witnesses back to life. Millions of Catholics were saved. Revelation 12 Satan used the Roman Empire to try to wipe out the early Church, Satan was cast down as the Empire collapsed. Revelation 13 The antichrist beast Popes reigned in power 1,260 years, 538-1798, is the little horn of Daniel 7, son of perdition. The false prophet Jesuit Superior General rose to power from land (earth) of Vatican and has created many deceptions. Revelation 14 Points to great harvest during the Protestant Reformation & wrath on Catholic countries who obey antichrist Pope. Revelation 15 Overcoming saints victorious over the beast. Prelude to 7 vials and judgment on those who support Papal Rome. Revelation 16 1st Vial: The foul sore of atheism was poured out on Catholic France, leaving them with no hope, led to revolution. 2nd Vial: The French Revolution started in 1793, killed 250,000, as France had obeyed the Pope and killed saints. 3rd Vial: The French Revolution spread to rural areas of France, where Protestants had been killed in river areas. 4th Vial: The bloody Napoleonic wars shed the blood of countries who had revered and obeyed the antichrist Pope. 5th Vial: Judgment on the seat of the beast. Papal States invaded in 1798, Pope imprisoned, removed from power. 6th Vial: The Turks vast domain dried up, they were only left with Turkey. They lost control of Palestine in 1917 AD, Israel became a nation again in 1948
@fookingsog
@fookingsog 2 года назад
The V29 Whistle is an excellent print!!! Different sized chambers make for a nicely dissonant *LOUD* Whistle!!!😎👍🏻
@natewarda2205
@natewarda2205 2 года назад
I’ve also printed out the v29. Great whistle and quite loud. Hurts your ears if you use it too much.
@fookingsog
@fookingsog 2 года назад
@@natewarda2205 I had someone call it the "Rape Whistle"!!!🤣😆😂👍🏻...because it was SOOO LOUD!!!
@soundspark
@soundspark 2 года назад
I almost thought of bringing one into work when I was being continually harassed.
@typenn84
@typenn84 2 года назад
That was one of the first things I printed when I got my 3d printer. I have a couple attached to my life jackets for water activities, theyre great safety whistles
@liontamer4581
@liontamer4581 2 года назад
@@fookingsog ayyy I call it that too XD
@AllYourBaseAreBelongToU5
@AllYourBaseAreBelongToU5 Год назад
I’m definitely going to try the bird whistle and the tiny noise maker. Those seem super easy and fun.
@kermanarmstrong5377
@kermanarmstrong5377 8 месяцев назад
My engineering teacher had one of those air raid sirens, his also had a lot of rubbing but sounded absolutely amazing
@AdirondackRuby
@AdirondackRuby 2 года назад
The water whistle is my favorite. I had one as a kid (that, no joke, was the same color as the one you printed) and it was my favorite thing ever. I was forever annoying my older brother...and my cats. Thanks for the nostalgia.
@zynstein8059
@zynstein8059 2 года назад
Yea, water whistle is pure nostalgia for me. I picked one up in turkey as a kid that was really nice. still remember playiing with that
@hacheliam1495
@hacheliam1495 2 года назад
you can do the same sound with just your mouth and a little bit of water (hell even your own spit can do the job if you really don't have any water on your hand xD) : put water in your mouth and keep it (different quantity will produce different kind of sounds) look at the ground or your feet slightly open your mouth so that air could go throught but the water doesn't flow out breath in (the speed at which you inhale influences the sound) done! I discovered this by accident when I was 4 ^^
@MOE13576
@MOE13576 Год назад
@@hacheliam1495 hahaha tf xD
@MrMannFB
@MrMannFB Год назад
@@hacheliam1495 OMG I did this a lot d
@mszoomy
@mszoomy 2 года назад
I had a former boss who had an actual US Army Air raid siren. Took it out to the loading docks for a test run, holy hell Batman!! Louder than any Metallic or GnR concert. Loved watching you test the various items. I did print that Mayan death whistle for a friend, what a scary sound they make
@yetanother9127
@yetanother9127 2 года назад
It's got to be loud--the whole town needs to hear it! For those of you who have never seen an air raid siren up close, here's an example of a Carter siren as used in World War II: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q5FwsIkJCXU.html As you can see, it works pretty much like the one in the video--a turbine rotating inside a slotted drum makes the noise, and two differently-tuned drums are used to create that distinctive dissonant howling. Both motorized and hand-cranked models were used during the war.
@mszoomy
@mszoomy 2 года назад
@@yetanother9127 he had a crank one, looked a lot like what Angus made only Army green. Apparently the biannual corporate sales meetings would get pretty rowdy, it was always a competition to see which district made the most noise
@TheExplosiveGuy
@TheExplosiveGuy 2 года назад
At the town my grandma used to live in they had a full size Air raid siren that was used by the forest service and fire department way back in the day, if I'm not mistaken it was powered by a Chrystler V8 and could be heard for a 5 mile radius, it's incredible how loud those things are. I miss hearing that sound, they stopped using it around when I was a kid due to the internet being widely accessible and not wanting to pay for maintenance anymore.
@jacobhanekamp2534
@jacobhanekamp2534 Год назад
The noisemaker (4:35) is also a commonly used percussion instrument A more common variant is you have a handle that turns a gear that runs through 2 separate pieces of wood But we do actually have a version like in the video, except it's a lot bigger, and a lot louder
@krystofkarda7395
@krystofkarda7395 Год назад
In czech we use it on Easter And Itsade of Wood but in the video Its really REALLY quiet
@scrubbart
@scrubbart Год назад
Historian:*doesn’t know what a thing does or is for* Also Historian: it’s ritualistic
@marsgizmo
@marsgizmo 2 года назад
Wonderful showcase! 👏 My fav is the Air Raid Siren, although I would probably install a motor to it to test its limits 👀
@MakersMuse
@MakersMuse 2 года назад
Haha that could be interesting 😳
@Becvar80
@Becvar80 2 года назад
@@MakersMuse I wonder if printed bearings would work
@floofyfurlogdog999
@floofyfurlogdog999 2 года назад
You could probably just use a drill.
@Tommy-pv1vh
@Tommy-pv1vh Год назад
A motor dedicated siren performs a lot better (3d printed siren but designed with the motor in mind)
@nick86i
@nick86i Год назад
Yeah, it can be turned with a drill :D
@jairusofall
@jairusofall 2 года назад
That deal at micro center is soo good! I picked one up and so did a friend. Thank you soo much for letting me know! I really needed another printer to get parts made faster. Got it last night, put it together, and first print was really nice!
@novtek
@novtek 2 года назад
My nearest store is over 200 miles away. The $99 printer will cost $150 in gas to get there, maybe more.
@roowut
@roowut 2 года назад
@@novtek my nearest one is 15,000km away and would cost $2000 to fly there
@lizdelehant8568
@lizdelehant8568 2 года назад
When does the coupon expire
@dharielnailo
@dharielnailo 2 года назад
@@novtek 400 miles roundtrip @ 20 mpg and ~$4/gallon gas = $80.
@novtek
@novtek 2 года назад
@@dharielnailo You get better gas milage than our van.
@cocoacry
@cocoacry Год назад
7:40 you are supposed to cup it with your hands, take a deep breath into your diaphragm, then blow strongly, and as long as you can hold it. My friends, and I would use these in medieval warfare battles at my homeschool co-op, and it was terrifying to hear the battle starting screech.
@gamernick1533
@gamernick1533 Год назад
I printed the V29 (or version at that point) to use as a whistle at school (teacher, not student) and can fully attest to the insane volume of it. There was no mistaking the end of break when I was on duty, anywhere across the school grounds. Sadly, I lost it somewhere and I haven't had my printer out for a few years now!
@Engineergaming44
@Engineergaming44 2 месяца назад
haha, I know someone who printed a bunch of kazoos and handed them out. The teachers were not amused to say the least
@klave8511
@klave8511 2 года назад
I printed. “Loud” whistle and was very disappointed by the low volume. Then a friend tried it and WOW! I wasn’t blowing hard enough, there was a sort of threshold where it suddenly blasted out more sound. Took a very good breath to reach the loud amplitude, too loud to try without hearing protection indoors. I gave it to my grandson, I don’t think he can hit the full volume yet.
@Falcodrin
@Falcodrin 11 месяцев назад
You must really hate your kid lol
@AndrewWorkshop
@AndrewWorkshop 2 года назад
I've printed the V29 and attached it to a PFD to use as a emergency whistle. The air raid siren sounds awesome!
@hardcodedsoftware4212
@hardcodedsoftware4212 2 года назад
Stap an air raid siren to a pfd!
@uiopuiop3472
@uiopuiop3472 2 года назад
whate is an pdf
@AndrewWorkshop
@AndrewWorkshop 2 года назад
@@uiopuiop3472 personal flotation device
@jama211
@jama211 2 года назад
@@uiopuiop3472 whate is an pdf 😂😂😂😂😂
@chrisandersen977
@chrisandersen977 Месяц назад
For tight fits that don´t turn, try a drop of cooking oil or stroke a candle on the surface, best the small candle lights, it worked for me for other projects
@gasad01374
@gasad01374 8 месяцев назад
I worked an indoor monster truck show, legitimately louder than an F18 fighter jet doing low passes, and the sound lasts longer as it’s not just speedy passes overhead. The sound from the trucks almost instantly reaches a level where you don’t really hear them anymore, just ringing. Around 125 decibels if I’m remembering right, didn’t wear ear protection even though it was provided and I probably should have. The worst part about it is that parents weren’t making their kids wear the ear protection either and most of the kids were below 10yrs old, some even threw them out after getting them so they just had to sit in pain. Guarantee at least 1 kid from that event got permanent hearing damage
@JonS
@JonS 2 года назад
Love it! My kids are going to be getting noisy this week. For the air raid siren, printing with a horizontal compensation seems a much better option than sanding.
@FierceDeityLink1990
@FierceDeityLink1990 2 года назад
Well there is a reason most 3D printed ocarinas struggle with tuning.. It originally a clay instrument and a proper solid object. That gives the best result in tones. And even in clay it really need proper tuning
@wolfetteplays8894
@wolfetteplays8894 Год назад
Pretty sure it was actually creamic, clay doesn’t tolerate moisture well and is very brittle
@patrickrshannon
@patrickrshannon Год назад
Thank you for the MicroCenter code!! I gave your code to my entire architecture class, and 6 people have bought one so far! I appreciate all your good content! Cheers from Dallas, TX.
@MakersMuse
@MakersMuse Год назад
Awesome! No worries
@lektroniks
@lektroniks Год назад
Fascinating video - I like noise, but what really caught my attention was spotting the synthesizers I also own; Behringer 2600, TX802, JP8080 (I have the 8000), DX7 (I have a DX9), and the JX8P (I have a JX10), I also have a pile of other analogue dinosaurs as well as various hand built modular synths. Now intrigued as to what music you make with all that gear?
@RegularOldDan
@RegularOldDan 2 года назад
I absolutely love the ocarina; I printed one a while ago and I can play a scale but not much else yet. I really ought to buckle down and learn it. It sounds great.
@justlo0k33
@justlo0k33 2 года назад
I got my $99 Ender 3! But please be aware that they are indeed the “downgraded” version with the 256 rather than 512 chip, a rebranded power supply, and 4.2.2 mainboard. It is still a great deal, but it’s good to know if you go down the upgrade path later on.
@manuelsepulveda2692
@manuelsepulveda2692 2 года назад
Good info! I keep getting a captcha error when I submit for the coupon. Do you have any idea?
@KeithShelton
@KeithShelton 2 года назад
Wish I could get one. In-store only and the nearest is a solid 3-4 hours away.
@justlo0k33
@justlo0k33 2 года назад
@@manuelsepulveda2692 no I don’t know why that would be for sure. But I would try a different browser or turn off any vpn, or try on different network connection ie. Mobile vs wifi
@justlo0k33
@justlo0k33 2 года назад
@@KeithShelton yeah you’re probably looking at around $80 in fuel alone for that round trip. So factor that into the discounted price.
@kellysander6987
@kellysander6987 2 года назад
How do you apply for the coupon? When I entered the site there was nothing on it about the new customer exclusive.
@appidydafoo
@appidydafoo 2 года назад
4:59 well uhh I wasn't quite ready for that hit of orthodoxy 😅
@BinglesP
@BinglesP 9 месяцев назад
There’s a Micro Center shop in a town near my home, it’s actually a pretty good store and I’m surprised it sponsored a channel
@piconano
@piconano 2 года назад
I printed a V29 a couple of years ago. It's still in my key ring. Superb design.
@court2379
@court2379 2 года назад
I have a few as well, but something isn't quite right about it. It takes too much air and sounds wheezy. I think the opening may be too large. I had to print at reduced scales so that my smaller children could blow it. Which raises the pitch of course. Though reducing the thickness and increasing the length keeps the pitch closer to original, but reduces the size of the air opening and makes it easier to blow.
@ChristianBehnke
@ChristianBehnke 2 года назад
"Angus and the Ocarina of Sadness" album coming soon!
@CaptOrbit
@CaptOrbit Год назад
When I was a kid I had a siren whistle that was in the shape of a small twin engine airplane. You blew in a tube that was under the tail. The siren part was located in the body and the air exited the body via two vents that were directed to make the propellers spin as you blew into it. It was pretty cool. If I still have it then it's packed up somewhere. I'd like to find it again someday though.
@Annihilator_5024
@Annihilator_5024 9 месяцев назад
i was just looking on youtube for high quality videos on something actually interesting and i finally found one
@laurv8370
@laurv8370 2 года назад
Brilliant. You have to try printing those "wooden frogs" so popular in south-east of Asia (and other "percussion" stuff), some make a terrible loud and bothering noise. We are living/working here, and once, many years ago, when we returned to Europe, we bought some for the kids of all friends who had young kids, as a joke. The friends and their neighbors are still remembering... :D
@ADBBuild
@ADBBuild 2 года назад
I printed the bearing version of the air raid siren as a birthday gift for my dad. I've cranked it 2-3x faster than you did yours and it is LOUD. I did have to sand/file quite a bit on the hex shafts and a bit on the outside of the fan, but all the bearings were a nice tight press in fit. I did modify it slightly and used metal dowel pins as axels for all the bearings.
@ManuelAlejandroTorresMonroy
I made a whole bunch of one design I found in the repositories for a neighborhood organization to use it as alarm for the safety of the neighbors since sadly in Mexico there are some problems with security in general.
@grumpystiltskin
@grumpystiltskin 2 месяца назад
Oh, I've noticed that an upside down nuclear power plant cooling tower makes a wonderful bongo. But not when printed in vase mode. Needs to be somewhat stonger. I didn't make the model,. Just noticed the tone is really nice and the base makes a good enough skin. Nuclear Cooling Tower Filament Vase by drodfro
@andrejrozmaring
@andrejrozmaring 2 года назад
Fun fact: blowing into a tictac contained from the little groove where the lip snugs into creates a similar if not exact sound as a death whistle (at times, it's gotta be completely empty and warm enough in the room/outside to where the wide plastic side walls of the container can slightly wobble to have it sound more like a vibrating sound and less like a monotone whistly screech)
@Xerber85
@Xerber85 2 года назад
The V29 whistle is great. Many of my family members are really into sailing, so I printed a bunch of them to replace the existing whistles on their life vests. The V29 is easier to hear over long distances than the standard life vest whistles and is easy to clear of water to boot.
@hoteny
@hoteny 8 месяцев назад
0:16 I made that whistle to the left at school and if you don’t blow enough to reach that tiny threshold its silent but then its great
@feral7094
@feral7094 Год назад
My favorites have been a aztec death whistle and a 12 hole ocarina. I have 3d printed a guitar body but haven't assembled yet
@Aurea2001
@Aurea2001 2 года назад
I personally like air raid sirens Also, that death whistle was kind a bad example of a death whistle They usually sound like a haunting scream, which this one absolutely didnt. At least in the video
@ar95civic
@ar95civic 2 года назад
That death whistle definitely does work, think it was audio clipping. I printed the same and its scary and loud :)
@gummycubez
@gummycubez 2 года назад
I remember the Orange Screamer design being used in a hotwheels car called Night Burner, that being my first interaction with one directly. Honestly? Very fun. Hope one day hot wheels can dona gimmick with something like this where when the car is on the track, some of that air passes a siren like this to make a small rumbling engine sound.
@Gebenki
@Gebenki 2 года назад
Technically a Hot Wheels with a turbo.
@gummycubez
@gummycubez 2 года назад
@@Gebenki That would be exactly what it is now that you mention it.
@bannah6400
@bannah6400 Год назад
Repent and follow Jesus my friend! Repenting doesn't mean confessing your sins to others, but to stop doing them altogether. Belief in Messiah alone is not enough to get you into heaven - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36). Contemplate how the Roman empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years to accomplish the religion of the Israelites C) History as we know it is fake. You don't really need to speculate though because you can start a relationship with God and have proof. Call on the name of Jesus and pray for Him to intervene in your life. - Revelation 3:20 Revelation 6 1st Seal: White horse = Roman Empire conquering nations under Trajan 98-117 AD & Gospel spreading rapidly. 2nd Seal: Red horse, bloody civil wars with 32 different Emperors, most killed by the sword. 185-284 AD 3rd Seal: Black horse, economic despair from high taxes to pay for wars, farmers stopped growing. 200-250 AD 4th Seal: Pale horse, 1/4th of Romans died from famine, pestilence; at one point 5,000 dying per day. 250-300 AD 5th Seal: Diocletian persecuted Smyrna church era saints for ten years, blood crying out for vengeance. 303-312 AD 6th Seal: Political upheaval in the declining Roman Empire while the leaders battled each other. 313-395 AD Revelation 7 Sealing of 144,000, the saints, before trumpet war judgments, which led to the fall of the Roman Empire. Revelation 8 1st Trumpet: Alaric and the Goths attacked from the north, the path of hail, and set it on fire. 400-410 AD 2nd Trumpet: Genseric and the Vandals attacked the seas and coastlands, the blood of sailors in water. 425-470 AD 3rd Trumpet: Attila and the Huns scourged the Danube, Rhine & Po rivers area, dead bodies made water bitter. 451 AD 4th Trumpet: Odoacer and the Heruli caused the last Western Emperor (sun), Senate (moon) to lose power. 476 AD With the Western Roman Emperor (restrainer of 2 Thes. 2) removed; the son of perdition Popes took power. Revelation 9 Two woe judgments against the central 1/3rd and eastern 1/3rd of the Roman Empire. 612-1453 AD 5th Trumpet: Locust & scorpions point to Arabia, the rise of the Muslim army. Islam hides Gospel from Arabs. 612-762 AD 6th Trumpet: Turks released to attack Constantinople with large cannons (fire, smoke, brimstone). 1062-1453 AD Revelation 10 The little book is the printed Bible, which was needed after the Dark Ages when Scriptures were banned by Popes. Revelation 11 7th Trumpet: Martin Luther measured Roman Church; found that it’s an apostate church, not part of true temple. The two witnesses are the Scriptures and saints who proclaim the pure Gospel and testify against the antichrist Popes. Papal Church pronounced Christendom dead in 1514 AD. Silence for 3.5 years. Then Luther posted his 95 Thesis, which sparked the Protestant Reformation and brought the witnesses back to life. Millions of Catholics were saved. Revelation 12 Satan used the Roman Empire to try to wipe out the early Church, Satan was cast down as the Empire collapsed. Revelation 13 The antichrist beast Popes reigned in power 1,260 years, 538-1798, is the little horn of Daniel 7, son of perdition. The false prophet Jesuit Superior General rose to power from land (earth) of Vatican and has created many deceptions. Revelation 14 Points to great harvest during the Protestant Reformation & wrath on Catholic countries who obey antichrist Pope. Revelation 15 Overcoming saints victorious over the beast. Prelude to 7 vials and judgment on those who support Papal Rome. Revelation 16 1st Vial: The foul sore of atheism was poured out on Catholic France, leaving them with no hope, led to revolution. 2nd Vial: The French Revolution started in 1793, killed 250,000, as France had obeyed the Pope and killed saints. 3rd Vial: The French Revolution spread to rural areas of France, where Protestants had been killed in river areas. 4th Vial: The bloody Napoleonic wars shed the blood of countries who had revered and obeyed the antichrist Pope. 5th Vial: Judgment on the seat of the beast. Papal States invaded in 1798, Pope imprisoned, removed from power. 6th Vial: The Turks vast domain dried up, they were only left with Turkey. They lost control of Palestine in 1917 AD, Israel became a nation again in 1948
@VladislavKurashov
@VladislavKurashov Год назад
V29 requires pretty dialed in printer, the internal slot width is very important to achieve high loudness level. And it's better to print it with 0.3mm line thickness so that there's less rounding. I use it as safety whistle for hiking.
@bradwillard8009
@bradwillard8009 2 года назад
love the modular you got behind you
@y2ksw1
@y2ksw1 2 года назад
I actually thought you would show us the loudest 3D printer sound while printing a particular piece. Is that a suggestion? 😊
@ashvanes484
@ashvanes484 2 года назад
Same, and I would like that but most people don't seem to enjoy the sound of printing, where I find it soothing.
@Jonathan.D
@Jonathan.D 2 года назад
I'm surprised you didn't make a Bullroarer. For those of you who don't know what it is, remember the part in Crocodile Dundee when he used a piece of wood tied on a string to "make a phone call?" That's a bullroarer. I have made a few of them and depending on the shape they can make a lot of noise and it can sound kind of creepy, especially at night. I made one for my kids and they would play it after dark. They had all the kids and some of the adults in the neighborhood freaked out.😄
@AtotehZ
@AtotehZ 8 месяцев назад
5:28 You can make it much louder, but ofc you'd have to tweak it then. I have one I've brought to sports games that's easily over 100dBa. Mine is made from wood, but the key factor is probably the stiffness and thickness of the vibrating part.
@calientekitsune
@calientekitsune 8 месяцев назад
What if you combined aspects of the dual chamber wistle with the extendable wistle?
@InkMink
@InkMink 2 года назад
The acme road clearer thing they put those in these toy hings with huge pouty lips back in the day I would play with it with my older sister and we’d laugh till our stomach hurt cause it looked stupid and sounded ridiculous if you inhale and exhale on it quickly it sounds funny . I forgot that memory so thanks. 😊 the bird one was cute tho would have loved that.
@MakersMuse
@MakersMuse 2 года назад
I forgot about those!!! Ahaha
@carrioncrow8191
@carrioncrow8191 2 года назад
Cool video! I think a loud 3d printed key chain whistle would make clever gifts Also, when cleaning the print on the collapsible whistle, it is safer to secure the blade and use it stationary by moving the piece, instead of keeping the print stationary and moving the blade
@CarsynKittelson
@CarsynKittelson 21 день назад
The neighbor next door is wondering why so many loud noises are coming from across:
@CooperDooper38
@CooperDooper38 8 месяцев назад
3D printed ocarina sounds like a fun idea until you remember that moisture from your breath gathers on plastic, so the inside of the ocarina will be dripping after a few notes. Maybe printing it with a non-plastic or hybrid filament would work better
@Danihacs
@Danihacs 2 года назад
2:23 At first, I thought you were singing "Ima just island boi 🤡 Ima just island boi 🤡"
@hikingpete
@hikingpete 2 года назад
Thank you for editing the sound to make this safe to listen to with headphones. It's very much appreciated.
@salamencerobot
@salamencerobot Год назад
This video reminds me of an origami noisemaker, I don't remember the name but you swing it down quickly and it pops open with an absurdly loud BANG, it's great for startling people
@DrLokal
@DrLokal Год назад
also the groggers we use in czechia before easter, we go around at morning and collect some money then split with those who cane the whole week.
@animatorgeek
@animatorgeek 2 года назад
I recently printed the tubular siren whistle you have on your display surface. It's fun, though it also made me want to get some really tiny bearings and make one with super-low friction to reduce the rattling sound it produces. Also, I'm a little disappointed you didn't include any membrane pipes. One that's easy to print is my Ultrakazoo, which is available on both Thingiverse and Printables. I'm curious how it would have fared in your loudness test.
@thebeardeditguy6874
@thebeardeditguy6874 2 года назад
I’ve printed the V29. With a decibel measuring iPhone app about a foot to foot and a half away, my dad and I got it to register over 126 db (both of us can be fairly loud when needed so might have some strong lungs for making the V29 louder)
@ChaosTherum
@ChaosTherum 5 месяцев назад
One of my early prints was that ocarina, after I printed an initial one I did it again but completely solid, no infill and it's a shockingly sturdy piece of plastic and sounds pretty great as well.
@SwainixFPV
@SwainixFPV 4 месяца назад
100% infill you mean ? Printed one as a test the other day but I'm having trouble with the highs, I'll try the other model that is supposedly better tuned too because mine is definitely out of tune next to my guitar lol
@mrtime4777
@mrtime4777 Год назад
The ratchet noise makers were also used in world war 1 for signaling when gas was coming over the trenches however they were quite a bit bigger and made of wood
@martinw89
@martinw89 2 года назад
Classic that the Makerbot assembly was difficult to print. It was probably impossible on an actual Makerbot
@kickasspeanuts
@kickasspeanuts 2 года назад
2:51 im questioning that one on the left
@samiakmw3681
@samiakmw3681 Год назад
I’m questioning your mind
@bastiendayer8738
@bastiendayer8738 4 месяца назад
Its just the shape of an egg.
@CaptainRex549
@CaptainRex549 Год назад
I used an acme siren whistle for a concert in middle school (I am a percussionist) I also Played a slide whistle in the same song. (I also have permanent hearing damage) not too much, but this is still very loud
@SuperMarioOddity
@SuperMarioOddity 9 месяцев назад
Ratchets are actually a real musical instrument btw, I've heard them in a few songs
@twinturbostang
@twinturbostang 2 года назад
3D Printed Firearm: - No motors. Check - No batteries. Check - No electronics. Check - And they definitely move a lot of hot air! - 140+ dB!
@ZaZaTrucka
@ZaZaTrucka 2 года назад
nobody: my neighbor at 3 AM: 11:50
@theloneviking9145
@theloneviking9145 Год назад
Death whistle for me! I just received my anycubic printer today, my first one and I’m gonna print out that for my first print! It looks cool, has a cool sound to it and the whole mystery factor sold me.💀
@jaykitibuliac3695
@jaykitibuliac3695 Год назад
There was a Hot Wheels car a while ago that literally had an "Orange Screamer" system built into it. I have 2 and they're so fun to mess around with
@awo1fman
@awo1fman 2 года назад
The ocarina makes me wonder if there's a recorder version out there? The ones I'm most interested in are the V29, the bird whistle and of course the kazoo.
@pajamas720
@pajamas720 2 года назад
Prusa does have a video on 3d printed instruments, and theres no doubt a wide selection on the net, up to a printable trumpet or trombone.
@Damian-cilr1
@Damian-cilr1 2 года назад
its certainly possible.havent seen any though
@Rekkuza-eu6sp
@Rekkuza-eu6sp Год назад
Repent and follow Jesus my friend! Repenting doesn't mean confessing your sins to others, but to stop doing them altogether. Belief in Messiah alone is not enough to get you into heaven - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36). Contemplate how the Roman empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years to accomplish the religion of the Israelites C) History as we know it is fake. You don't really need to speculate though because you can start a relationship with God and have proof. Call on the name of Jesus and pray for Him to intervene in your life. - Revelation 3:20 Revelation 6 1st Seal: White horse = Roman Empire conquering nations under Trajan 98-117 AD & Gospel spreading rapidly. 2nd Seal: Red horse, bloody civil wars with 32 different Emperors, most killed by the sword. 185-284 AD 3rd Seal: Black horse, economic despair from high taxes to pay for wars, farmers stopped growing. 200-250 AD 4th Seal: Pale horse, 1/4th of Romans died from famine, pestilence; at one point 5,000 dying per day. 250-300 AD 5th Seal: Diocletian persecuted Smyrna church era saints for ten years, blood crying out for vengeance. 303-312 AD 6th Seal: Political upheaval in the declining Roman Empire while the leaders battled each other. 313-395 AD Revelation 7 Sealing of 144,000, the saints, before trumpet war judgments, which led to the fall of the Roman Empire. Revelation 8 1st Trumpet: Alaric and the Goths attacked from the north, the path of hail, and set it on fire. 400-410 AD 2nd Trumpet: Genseric and the Vandals attacked the seas and coastlands, the blood of sailors in water. 425-470 AD 3rd Trumpet: Attila and the Huns scourged the Danube, Rhine & Po rivers area, dead bodies made water bitter. 451 AD 4th Trumpet: Odoacer and the Heruli caused the last Western Emperor (sun), Senate (moon) to lose power. 476 AD With the Western Roman Emperor (restrainer of 2 Thes. 2) removed; the son of perdition Popes took power. Revelation 9 Two woe judgments against the central 1/3rd and eastern 1/3rd of the Roman Empire. 612-1453 AD 5th Trumpet: Locust & scorpions point to Arabia, the rise of the Muslim army. Islam hides Gospel from Arabs. 612-762 AD 6th Trumpet: Turks released to attack Constantinople with large cannons (fire, smoke, brimstone). 1062-1453 AD Revelation 10 The little book is the printed Bible, which was needed after the Dark Ages when Scriptures were banned by Popes. Revelation 11 7th Trumpet: Martin Luther measured Roman Church; found that it’s an apostate church, not part of true temple. The two witnesses are the Scriptures and saints who proclaim the pure Gospel and testify against the antichrist Popes. Papal Church pronounced Christendom dead in 1514 AD. Silence for 3.5 years. Then Luther posted his 95 Thesis, which sparked the Protestant Reformation and brought the witnesses back to life. Millions of Catholics were saved. Revelation 12 Satan used the Roman Empire to try to wipe out the early Church, Satan was cast down as the Empire collapsed. Revelation 13 The antichrist beast Popes reigned in power 1,260 years, 538-1798, is the little horn of Daniel 7, son of perdition. The false prophet Jesuit Superior General rose to power from land (earth) of Vatican and has created many deceptions. Revelation 14 Points to great harvest during the Protestant Reformation & wrath on Catholic countries who obey antichrist Pope. Revelation 15 Overcoming saints victorious over the beast. Prelude to 7 vials and judgment on those who support Papal Rome. Revelation 16 1st Vial: The foul sore of atheism was poured out on Catholic France, leaving them with no hope, led to revolution. 2nd Vial: The French Revolution started in 1793, killed 250,000, as France had obeyed the Pope and killed saints. 3rd Vial: The French Revolution spread to rural areas of France, where Protestants had been killed in river areas. 4th Vial: The bloody Napoleonic wars shed the blood of countries who had revered and obeyed the antichrist Pope. 5th Vial: Judgment on the seat of the beast. Papal States invaded in 1798, Pope imprisoned, removed from power. 6th Vial: The Turks vast domain dried up, they were only left with Turkey. They lost control of Palestine in 1917 AD, Israel became a nation again in 1948
@bannah6400
@bannah6400 Год назад
Repent and follow Jesus my friend! Repenting doesn't mean confessing your sins to others, but to stop doing them altogether. Belief in Messiah alone is not enough to get you into heaven - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36). Contemplate how the Roman empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years to accomplish the religion of the Israelites C) History as we know it is fake. You don't really need to speculate though because you can start a relationship with God and have proof. Call on the name of Jesus and pray for Him to intervene in your life. - Revelation 3:20 Revelation 6 1st Seal: White horse = Roman Empire conquering nations under Trajan 98-117 AD & Gospel spreading rapidly. 2nd Seal: Red horse, bloody civil wars with 32 different Emperors, most killed by the sword. 185-284 AD 3rd Seal: Black horse, economic despair from high taxes to pay for wars, farmers stopped growing. 200-250 AD 4th Seal: Pale horse, 1/4th of Romans died from famine, pestilence; at one point 5,000 dying per day. 250-300 AD 5th Seal: Diocletian persecuted Smyrna church era saints for ten years, blood crying out for vengeance. 303-312 AD 6th Seal: Political upheaval in the declining Roman Empire while the leaders battled each other. 313-395 AD Revelation 7 Sealing of 144,000, the saints, before trumpet war judgments, which led to the fall of the Roman Empire. Revelation 8 1st Trumpet: Alaric and the Goths attacked from the north, the path of hail, and set it on fire. 400-410 AD 2nd Trumpet: Genseric and the Vandals attacked the seas and coastlands, the blood of sailors in water. 425-470 AD 3rd Trumpet: Attila and the Huns scourged the Danube, Rhine & Po rivers area, dead bodies made water bitter. 451 AD 4th Trumpet: Odoacer and the Heruli caused the last Western Emperor (sun), Senate (moon) to lose power. 476 AD With the Western Roman Emperor (restrainer of 2 Thes. 2) removed; the son of perdition Popes took power. Revelation 9 Two woe judgments against the central 1/3rd and eastern 1/3rd of the Roman Empire. 612-1453 AD 5th Trumpet: Locust & scorpions point to Arabia, the rise of the Muslim army. Islam hides Gospel from Arabs. 612-762 AD 6th Trumpet: Turks released to attack Constantinople with large cannons (fire, smoke, brimstone). 1062-1453 AD Revelation 10 The little book is the printed Bible, which was needed after the Dark Ages when Scriptures were banned by Popes. Revelation 11 7th Trumpet: Martin Luther measured Roman Church; found that it’s an apostate church, not part of true temple. The two witnesses are the Scriptures and saints who proclaim the pure Gospel and testify against the antichrist Popes. Papal Church pronounced Christendom dead in 1514 AD. Silence for 3.5 years. Then Luther posted his 95 Thesis, which sparked the Protestant Reformation and brought the witnesses back to life. Millions of Catholics were saved. Revelation 12 Satan used the Roman Empire to try to wipe out the early Church, Satan was cast down as the Empire collapsed. Revelation 13 The antichrist beast Popes reigned in power 1,260 years, 538-1798, is the little horn of Daniel 7, son of perdition. The false prophet Jesuit Superior General rose to power from land (earth) of Vatican and has created many deceptions. Revelation 14 Points to great harvest during the Protestant Reformation & wrath on Catholic countries who obey antichrist Pope. Revelation 15 Overcoming saints victorious over the beast. Prelude to 7 vials and judgment on those who support Papal Rome. Revelation 16 1st Vial: The foul sore of atheism was poured out on Catholic France, leaving them with no hope, led to revolution. 2nd Vial: The French Revolution started in 1793, killed 250,000, as France had obeyed the Pope and killed saints. 3rd Vial: The French Revolution spread to rural areas of France, where Protestants had been killed in river areas. 4th Vial: The bloody Napoleonic wars shed the blood of countries who had revered and obeyed the antichrist Pope. 5th Vial: Judgment on the seat of the beast. Papal States invaded in 1798, Pope imprisoned, removed from power. 6th Vial: The Turks vast domain dried up, they were only left with Turkey. They lost control of Palestine in 1917 AD, Israel became a nation again in 1948
@lincroyableprocrastinateur5414
@lincroyableprocrastinateur5414 2 года назад
Having never seen or touched a kazoo, I had no idea there was humming or membranes involved😄 I had no idea how people made different 'notes' if you're generous enough to call them that. Thanks for such an interesting video!!
@micaelarivero6484
@micaelarivero6484 Год назад
For the proper use of a kazoo you actually need to know how to sing since it is only a voice modifier. If you listen to someone who doesn't know how to sing playing a kazoo it will ALWAYS sound awful. Check this: "Linkin Park - In the end (Kazoo cover)" and you will see
@MrMojorisenLK
@MrMojorisenLK Год назад
I was thinking, what if you have a stationary bed. Then the zx axis on just the two motors as in the Cartesian, but you move the entire zx axis gantry along the y axis. Then take the other two motors and add a second zx gantry that can now move independent of the other on the y axis. I would try to make the each zx gantry assembly's idex. Then try to make a tool head that can change it's angel towards the y axis; opposite it's homing corner. Then you could hopefully put two rotary axis on bother ends of y and add a belt printing feature. Or just a rotary axis on the middle of the stationary build plate. Beef everything up, use a duet board, and a tool change system for CNC, Lazer, etc. Steeling the idea from the new Bambu labs printer. Use lidar for bed tramming/ leveling, flow rate compensation, and active vibration cancelling. But you could also use the rotary axis and the lidar scanner to 3d scan items for either additive or subtractive manufacturing. Someone please read this
@derekostrander8355
@derekostrander8355 4 месяца назад
Hey! Great seeing you sponsored by microcenter! they are my go to spot for 3d printing stuff, that Inland is a damn good filament
@breadthegamblingtoaster
@breadthegamblingtoaster 2 года назад
2:30 we have been rickrolled
@BulkedAmbulance
@BulkedAmbulance Месяц назад
SON OF A-
@seanr2109
@seanr2109 2 года назад
Wish we could get a ender 3 pro in the UK for that price I’d love to get my hands on one
@eelboy
@eelboy 2 года назад
i saw that ocarina and i was immediately like ‘i have to do this. now.’
@kermitinmountain6371
@kermitinmountain6371 2 месяца назад
As a Deaf person who printed for my Daughter. I printed the Orange Screamer, V29 whistle, Mayan Death Whistle : Unbelieveable, however for the Kazoo, I had some trouble with printing the washer, cause it got stuck with raft. I will try this afternoon.
@MAGA_Patriot2024
@MAGA_Patriot2024 2 года назад
I've just been kazoo rolled! 🤣🤣
@robloxbeybladeboi204
@robloxbeybladeboi204 Год назад
Lol 😂
@wallrunner7635
@wallrunner7635 2 года назад
I can't wait to try out some of these. I picked up an ender 3 pro after your last video however it seems to be constantly pushing out low temperature thermal runaways. Is there a known solution to this?
@Legtlizrd
@Legtlizrd 6 месяцев назад
the last one uses a gear ratio where the output is faster than the input. thats why its quite hard to push the crank.
@carolineapodaca525
@carolineapodaca525 Год назад
Loved how the threads of filament looked like cobweb on the death whistle. Is there a way to purposely achieve that effect for horror, Halloween or spiderman themed prints?
@ScytheNoire
@ScytheNoire 2 года назад
These are great ideas to print for the kids... of my sister-in-law. :)
@p60b4_xxgamerboixx
@p60b4_xxgamerboixx 2 года назад
2:18 we all got rick rolled.
@kamdenmay3463
@kamdenmay3463 2 года назад
Totally thought he was humming island boys with the kazoo. Thanks for your time
@happyhippoeaters4261
@happyhippoeaters4261 9 дней назад
2:23 This is the Loudest Instrument of the vid.
@Bondon_723
@Bondon_723 2 года назад
8:31 ohhhh... It's a cartoon sound effect...
@Cory_
@Cory_ 2 года назад
As somebody with mild noise induced hearing loss, loud noises are much more dangerous than you could ever realize.
@TimpBizkit
@TimpBizkit 3 месяца назад
I made this little airhorn at my brother's house, but it also needed a sheet of plastic film for the diaphragm.
@Omega-uy5ye
@Omega-uy5ye Год назад
orange screamer is what was built in to my favorite childhood hotwheels car
@camdavbax
@camdavbax 2 года назад
Try the v29 resin printed. Loudest noise I've ever heard from something like it. Insane.
@soundspark
@soundspark 2 года назад
2:38 I'm sure when that game came out ocarina sales went through the roof.
@hpcma1
@hpcma1 Год назад
Omg you gotta do the brushless air motor print it's insanely loud
@Mr.Map.Man.Z
@Mr.Map.Man.Z Год назад
That science sounding intro always marks starting of my day
Далее
I made a mini deathroll... and it's INSANE!
14:13
Просмотров 1,1 млн
Six questionably legal pencil sharpeners
28:32
Просмотров 10 млн
Qalpoq - Fashist (hajviy ko'rsatuv)
38:05
Просмотров 1,3 млн
КТО СМОГ ПОБЕДИТЬ?😳
00:36
Просмотров 602 тыс.
That One Racoon Be Like:
00:12
Просмотров 3 млн
# 45 / EN.  Aster 🌸
5:16
Просмотров 10
Turning 3D Print Waste into New Filament!
12:48
Просмотров 1,2 млн
My Favorite Designs from 6 Years of 3D Printing!
17:12
Can you 3D Print with Hot Glue?
19:29
Просмотров 829 тыс.
2012 Slicer vs 2022 Slicer! 3D Print test
33:58
Просмотров 482 тыс.
Creality Ender-3... it's time to move on.
16:34
Просмотров 537 тыс.
Ten Awesome 3D-Printable Gifts
11:53
Просмотров 1,7 млн
Опасная флешка 🤯
0:22
Просмотров 679 тыс.
Ошибки пекашников часть3
0:56
Просмотров 21 тыс.