I put a GIANT motor in my Rc car 

Boom

Kev, a standard electricians socket screw is M3.5 and they're available upto 100mm in length. Unscrew one out of a socket or light switch and see if the thread is the same as you need

So satisfying to watch! 😃🙏🏾❤️

You should put “It’s Christmas Every Day” on a t-shirt

I think you can now say that kev is basically a pro at working on rc cars he could own a whole hobby shop

I think Kev should make a new video series of opening posts cause its so satisfying.

That was a cool parts upgrade. The 3.5mm bolt are the same as your electrical sockets around the house. So you can get double length plate screw from any decent electrical shop. Fun vid👍🏻

What an Epic build Kev 😱!!!! Loved the bench clips too. That hit in the grass was a bit rough 🙀🤣. My front RPM broke the second time out, but it was really my bad landing on a huge pipe from height. 34/34 gearing should work about perfect with the 800kv 👌. Just need another limitless spool gear for the spur, or you could fit 39/39. You're gonna love the M2C 7mm shock kit Brother. 🍻😎💪👊👊

Imagine humans that scale , going to work would be epic

Finally the full vid is here

2:45 *Music plays*. Memories come back from 2014

Anybody else love seeing Kevin build rc cars like this?

kev's craziness is concerning yet entertaining. Glad he actually works on and upgrades his rc's. Even fabricates things to make it work. Thats how you rc!

Damn I can’t believe that rear arm shattered like glass! But that chassis is tough as nails👍😎

Yeah Kev try 34/39 or even 34/34 1:1 gearing, I run 34/39 with the same electrics Beefcaked out and it's good. Gives you more torque to correct with all that weight. Horrible landing mate exploded them Stock arms 😔😂😂 Let us know how them RPM ones do... Unfortunately no droop setting on them arms so guess "Pick your Poison" Then you will need either the EXB shocks off a breaker site or I would get the M2C ones about to come out. I just got a set to test 7mm, hardened, and 7075 ends💪.... Dudes are still killing the EXB ones... So that's what I suggest. I should have a video out soon on them. Shame all you have to do $$ to these 8s Rigs but once there right they are beastly. Side note, them HUGE batteries just asking for more weight Dammage. I personally don't go over about 6700mah in my big rigs especially off there M2Cified 💪 Bash on brother.... Great vid mate

I love how Kev uploads great videos so reguarly

Hey Kev, little Tip from a 1/8th scale buggy racer. We put a lot holes in the back of the spoiler. With that done the car is much better to control in the air. The chances to crash by a bad landing is much lower now. (Sorry for my bad English; greetings from Germany :) )

Kev's video makes my day!! it's feel like ITS CHRISTMAS EVERYDAY ❤️

Yup I did almost all those M2C upgrades on my Outcast 8s too, except for the steering stuff. I also added front and rear K8S EXB links and rear K8S shocks all around. It's a freaking BEAST now. I also replaced the diff cases in the front and rear diffs with aluminum Arrma ones. The plastic diff cases split apart.

Challenge : singing "it's Christmas everyday" with each time a different melody

keV, 3.5mm screws are standard socket and switch faceplate screws

You get it to belch heaping amounts of smoke, and I'll send you as many American Flag stickers as it can hold! Love your stuff dude, keep up the good work

Freddy music at 2:42 lol. love the vid kevin its not easy to take apart and put those cars together the speed and accuracy you do it. Id love to know as much about rc cars as you.

Fun fact: This motor reminded me of the McLaren's Formula E motor. Maybe twice that size. 5kW/kg.

That's the way to film a rebuild! All high speed with power tools, and good lighting, photography. Promoting PPE too as well done Sir👍

at this point M2C racing is making like half of their sales just on Kev.

I don't even play with RC but you had me at the "Dewalt" torque wrench/hammer combo.... big ole thumbs up..

The chassis didn't look that bent to me🤔. It's amazing how you could easily get fitting upgrade parts for this model🤔. I thought you had to use modeling adhesive with the screws also, for better construction🤔. I usually lubricate any moving parts with CRC and top grade machine oil. This also allows for smoother performance, increased speed and handling, gear performance, and less friction and overheating potential. I'm not experienced with pulling things to pieces and assembling, building from scratch though🥴. I have a lazy streak, thats hard to conquer😖. I just like things to happen quickly, with little fuss. But I admire your skill and ability here. I don't think its necessary for rc vehicles to go so fast though🤔. Around 60klm is plenty I think, just to enjoy racing them. When they go too fast, I don't see the point, when they just shoot off into the distance🥴. It's all relative really. Eg. Going faster, accidents are just as fatal with an upgrade, as it is having an accident without the upgrade. What we have to remember is, that the original manufactured model, is specifically designed to be adequate for the max speed it does🤔

Omg that thing is built to beat that kids height record. 100mph easy with that set up. Looks so good with the polished aluminum. Tim the tool man Taylor would be grunting.

The sound you put when you break stg is absolutely epic!!

12:34 LOL love watching your videos!

1:25 aah I see what you did there bc arrma fans are missing some salt

1:25 salty gameover 😂

Lol hey I use those expensive dewalt hammers like that also.

You need a 39/39 gearing and the frond and rear diff 500.000 oil and the middle silicone earplugs. It's a perfect combo with this motor and ESC (i have exactly the same setup and it's a BEAST!)

Anyone who wants a armma just buy the body shell and go to m2c for the rest of it lol

Thats one clean looking build. Except for that one gasket that your shop vac ate

You need a “WHAT HAPPENED” shirt with random broken RC parts on it!!!!

YOU ARE SO COOL KEV I LIKED YOUR ALL VIDEOS. YOU ARE LIKE A GOD OF RC'S

oh my gosh, what a nightmare having to screw with that chassis for those that just wanna bash and drive around when they have so very little free time after work and family obligations. I cant imagine having to replace all that after such a short period of time. Not to mention having to spend even more money.

This was a complete rebuild Did enjoy watching it These videos remind me of me and my friends breaking stuff and putting it back together

Kev, how’d the driver handle it? I had a woman back into my truck and try to blame me because my bull bar sticks out on the front?!

Fresh. Love the M2C braces.finger bonkin the hole lol. Has anyone ever hit that brick building off the moon jump before.

Arrma = aftermarket tough! Spend the price of the car again to get something nearly useable. Traxxas = out the box ready to race! Tough as anything 👌

What kind of oils do you put in shocks jumping that high? Or doesn't matter coz it's gonna bottom out anyway.

Kevin, besides the car, I have learned something from you. I was just wondering How you use that drill on those screws without locking then so tight due to the power of the drill. thanks I like your video's

epic! Can't wait to see how it performs with that servo and some better arms/shocks. arrma can not make 8s arms lol... you'd think they would start copying rpm by now haha

Kev, if you are ever in desperate need of a longer M3.5 then buy a plug socket face plate screw from somewhere like Screwfix. Yes, they are a slot head but as a temp it may do and they come in different lengths.

him replacing the stock body of the rc sounds is just to satisfying.

It always amazes me how EASY you make everything look when you're "wrenching" 😁

LOL poor Andy😂😂😂 it seems like they hit the wrong part😂

can i suggest to use bosch battery screwdriver, they had a very fine and precise clutch! they can handle little screw very good!

I'm bored so I'm just rewatching all of Kev's videos🤣

WoW!! What a HUGE difference. Such a BEAST now

Haha, I love the location tag 'bollucks' that's what arrma chassis are!!

LOL Kevin is like a honey badger.. “he don’t care” 🤣

3.5mm screws are faceplate screws go to any electrical shop and they will have a large selection any lenth pretty much 😀

I run a 39-46 gear ration for bashing and a 25-25 belt drive for speed running.. for xmaxx and outcast 8s. Good stuff kev!

I wish i could have one big rc's like that!

2:01 can u please try that whit an m2c chassis

3:19 that song brought back so many memories.

Turn up the BEC on your speedo. It can be set to HV and the stock servo comes to life!!

When you are with your friends on a race track or in the park is my favorite part of the video 🤪😜😋👍🇸🇮 greetings from sLOVEnia europe

You defo nuked that one Kev!! Just at the beginning I was muttering 'shock shafts'll go' ... sure enough, and quite a bit more! Very entertaining - glad it's your wallet, not mine, but thanks for sharing. Al.

That thing's like an abused puppy. You kick it around the garden, send it halfway to orbit and it still comes running back to daddy even though you're trying to kill it! And then you break its leg. Poor sod.😂😂

You should try an put a heatsink and fan on the motor if you can fit it. Always helps mine stay cool and longer run times.

All I could hear was the f1 podium celebration haha😂

Kev needs at shirt with just “Kevin Talbot” on it with the game over on the back

You should do a build that’s the most protected, like waterproof electronics, metal parts, and built for all seasons and all terrains

11:48 the music goes perfectly with the scene

Great video Kev! Wrenching, bashing, crashing! Watched entire video 🤙🏾

物理定律，改裝後的車雖然有更大馬力，更強骨架，但重量相對提高，輪胎爪地力亦更快超過極限，所以車只能在值路加快，一轉彎便告打滑失控，所以圈速沒能加快，改的只是浪費金錢 建議改用碳纖輕量化組件，不用改電機及電池，亦能加快速度及其過彎性能 由於整車質量輕了，原裝的骨架組件亦有效加強抗沖擊

Put this motor power to front wheels so it will not lift up from front Nice work😍

Kevin You should put the motor in xmaxx it would be an absolutely beast

the classical music just makes it THAT much better XD

you should really hae a tap and die set, much better than just drilling those holes, or if you are cheap have a long screw of that pitch and cut a couple of channels down the thread, the channels will alow some material to escape. you could also make any screw you need of any thread pitch so you wouldnt have issues like with not finding a long enough screw

m3.5 is standard for UK plug sockets and switches, any electrical supplier will have them, keep a stock mate!

Hey guy! Am new to your channel. As a child I was fascinated by small remote controlled toys and at a point I even built one or two myself to play with. But watching your channel now brings back long recessed memories of my childhood! Thank you for that! So, I have an idea for you! Since it's normal for you to launch you rc's into the sky! You can morph a small quadcopter to the sides so whenever you launch you will have a control descent! What do you think?

YES!!!!! 15 minutes you did it Kev! Thank you sir!!😁😁

All boilermakers loving the 10.8v hammer.

Why is it so satisfying when a rc car gets new, shiny upgrades?

Dudes like an arrma quality inspection specialist. I think if arrma got rid of blx and the regular and just pumped out the higher grade parts, they can sell the higher grade parts cheaper as a whole since they will only produce one excellent part rather then an OK and better then Okay part. Just basic manufacturing numbers… One thing though, I prefer metal over plastic. Aluminum is ahhhhhh idk but better then plastic

LMAO THE LOCATION "BOLLOCKS"

39/39 is the go to for that motor. Slap some 40mm fans on there and go 39/34

Christmas everyday here too ,I call postal service job security 😁😂😂

Could also drill that servo out and tap it for 4mm, then you can more easily find screws that fit it.

1 to 1 gearing is perfect for the 800kv hobbywing combo

those w renching videos are so good!

Kevin. From where did you buy the arrama limitless clear body shell . Can please please say

Man.. I love the look of all these beautiful parts

M3.5 screws are what sockets and switches are screwed back with and come in various lengths

Maybe you need a parachute on the car protect it on landing after the jump. It would be impressive if you could jump the first ramp, land on the roof of the building before taking a second jump off the building.😳

Honest title=transforming an rc to support a huge motor

im pretty sure m3.5 are standard socket/light fixing screws, should be able to get them in their 100s from screw fix

You have two option, a jdm personalised build of a Skyline R34, or see this guy's rc cars, which are closely as complex as a V-Tech engine

Hey, nice build man.. looking forward for big scale rc buggy with big motor..

Im a old e-revo driver and put a castle mamba monster 2 combo in it. Man its sick. Also a 2wd slash and wondering if there is any must do upgrades?

This is a very satisfying build

Can u make complete metal casted Diy Rc car 🥰🥰 It will be a really good video

😃Kevin the Jigs up mate, im gonna spill the Beans now..... Buy a Flippsky esc and brushless motor that size for like 225 us dollars. They use them for freaking skate boards and gover boards that blows any RC dumbed down motor and esc combo to date. That motor new by itself is 65 dollars right now. Flipsky❤❤❤ Never settle for what they want you to buy!!!!!!