I Tested Woodworking Sanders Under $100

Подписаться 652 тыс.

Просмотров 66 тыс.

50% 1

What is the best budget random orbital sander for woodworking. In this video I test sanders from Harbor Freight, DeWALT, Milwaukee, Bosch, Makita, and more!
This uncut version has 5 minutes of extra testing footage the "cut" version does not have.
Videos To Watch Next
Best Parallel Clamps Bessey, Jet, Bora, Harbor Freight - • Best Parallel Clamp? H...
PLANS: www.731woodwor...
Greatest Free Gift I've Ever Received: story4.us/731Wo...
Best Sander for Most People:
DeWALT - amzn.to/3LSOCmo
Craftsman - amzn.to/3BjKXJI
Milwaukee - thetoolnut.sjv...
Good Sanders:
Ridgid - homedepot.sjv....
Black and Decker (only if you're on a tight budget) - amzn.to/3BkHz1d
Other Sanders Tested:
Ryboi - homedepot.sjv....
Bosch - amzn.to/3nPNLLD
Skil - amzn.to/3nYXrmW
Metabo - amzn.to/3nRP6BA
Makita with Handle - amzn.to/42OAi5o
Makita - amzn.to/42QFkyb
Bauer - sovrn.co/146b5pi
Hercules - sovrn.co/141hqjw
WEN - amzn.to/3BloRX1
Other Tools in This Video
Best Sander I've Ever Used: amzn.to/41B24RT
3M Sandpaper I Use - lddy.no/1isyl
Sandpaper Organizer Box - amzn.to/41x8X6K
Dust Mask I Use - amzn.to/42QFNAr
Thermal Imager - amzn.to/3BjLziu
Dust Extractor I Use - amzn.to/3W2uBhS
This video is not sponsored. I purchased every sander myself. Some product links are Amazon and other affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
Other Tools/Equipment I'm Asked About Often:
Table Saw - amzn.to/3IoKqsZ
Table Saw Blade I'm Using - shrsl.com/3xv5i
Miter Saw - amzn.to/41hbJy4
Dust Extractor - amzn.to/41l6RYA
Tripod for Phone - amzn.to/3E3kWA9
Phone Holder for Tripod - amzn.to/3E1E6GG
Ariat boots I wear (super comfortable) - ariat.dkkdet.n...
Toolbox in Background - homedepot.sjv....
Tool Wall over Miter Station - amzn.to/3ZgW
📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.c... Add the word VIDEOS to the text to be alerted when I post new content.
🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
Get $10 off any order of stickers, labels, and more using this link: www.stickermul...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks RU-vid channel www.731woodwor...
Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. As an Amazon Influencer, I earn from qualifying purchases. This helps support my channel so I can continue to make content like this.
#woodworking #woodworkingtools

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 190

@731Woodworks 9 месяцев назад

Click "Read more" to see links to all of the sanders in this video. Watch Next Best Parallel Clamps Bessey, Jet, Bora, Harbor Freight - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jA4nhgY30kU.html Best Sander for Most People: DeWALT - amzn.to/3LSOCmo Craftsman - amzn.to/3BjKXJI Milwaukee - thetoolnut.sjv.io/eKRBPz Good Sanders: Ridgid - homedepot.sjv.io/VmOKdO Black and Decker (only if you're on a tight budget) - amzn.to/3BkHz1d Other Sanders Tested: Ryboi - homedepot.sjv.io/B059ky Bosch - amzn.to/3nPNLLD Skil - amzn.to/3nYXrmW Metabo - amzn.to/3nRP6BA Makita with Handle - amzn.to/42OAi5o Makita - amzn.to/42QFkyb Bauer - sovrn.co/146b5pi Hercules - sovrn.co/141hqjw WEN - amzn.to/3BloRX1 Other Tools in This Video Best Sander I've Ever Used: amzn.to/41B24RT 3M Sandpaper I Use - lddy.no/1isyl Sandpaper Organizer Box - amzn.to/41x8X6K Dust Mask I Use - amzn.to/42QFNAr Thermal Imager - amzn.to/3BjLziu Dust Extractor I Use - amzn.to/3W2uBhS The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommended-tools Join the TUBAFOUR NATION through Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, exclusive discounts, and other cool member only perks! www.patreon.com/731woodworks If you use one of these Amazon and other affiliate links, I will receive a commission on qualifying purchases. Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter to get new content alerts, sales, and more! mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Easy to Follow Build Plans - www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

@CrewsMachine 9 месяцев назад

I would love a comparison of your top picks in this lineup to more expensive sanders to see if you get a marked benefit from spending more or if the added cost just doesn’t justify any perceived benefit.

@coreytohme9861 9 месяцев назад

Most often with ANY product, there is a case of diminishing returns. I would say that for most casual woodworkers the jump in additional cost is not worth the benefit. However, do anything often enough and the worth becomes evident. I would say that unfortunately, whether the better/more expensive tool is worth it or not is heavily dependent on your budget and amount of time using the tool.

@Green3062 8 месяцев назад

I would like to see the 3M sander since we are not accounting for costs. I heard and seen favorable reviews but they , 3M, are very proud of their sander. Your thoughts?

@fk6823 9 месяцев назад

Great video! I have several of these sanders and I for the most part agree with your findings.. I will say though.. I have the Makita and I have NEVER been shocked from it.. You definitely have a defective unit. I'd exchange it and evaluate it again.. It's a solid tool

@robertbruins894 9 месяцев назад

This was interesting. Last year I purchased a DeWalt sander and couldn’t even use it it shook o bad. I ended up returning it and getting a Bosch and I love it.

@mrhobbs5713 9 месяцев назад

Same here. Couldn’t hold onto it

@FrankPapadakis 9 месяцев назад

I got the 2 handle Makita it is by far the best one out of all of these, you obviously have a manufacture defect unit.

@Damon_Barber 9 месяцев назад

I’m glad you decided to go ahead and re-release this today instead of not posting a video. Palm sanders make great Christmas 🎄 gifts 🎁 for beginner woodworkers and DIYers. This will help someone with some last minute shopping decision making, I’m sure! 🎉

@shaker3459 8 месяцев назад

I have never used the variable speed on my DeWalt. I don't think I will EVER be in a situation where I say to myself, "I wish I could slow this sanding process down...". 😂 When my DeWalt craps out it looks like I'll switch to the craftsman. Unless I splurge on the Mirka or Bosch. Good review 👍

@mrhobbs5713 9 месяцев назад

The best sander ever was the porter cable of about 20 years ago. I still have one and nothing beats it.

@HandymanLand 9 месяцев назад

This is the best review video i've seen on these palm sanders. Thanks for taking the time to put this video together. 👍

@731Woodworks 9 месяцев назад

I appreciate that!

@Mmikejs72 9 месяцев назад

I have owned the Ridgid for many years, and love it!! The biggest issue is that the dust collection works so well, that you almost need a shop vac to keep up.

@Dan-nr3om 9 месяцев назад

I have had my ryobi for a good 4 years now and I can't complain. It's been through hell probably been dropped 100 times and still gets it done

@JR-sk3jy 8 дней назад

Very nice and thorough review of the sanders! And very helpful, Thank you! Many Blessings to you and your family!

@paulmannix1760 9 месяцев назад

Just went through my 2nd Ryobi, they don’t appear to be happy with being connected to a vacuum, seems to work against the rotation although the dust collection is excellent. Just ordered a DeWalt ($219 Australian Dollars), they were able to give me some good advice about volume of air for best dust collection & they sell a connector for a vacuum. Thanks for the video confirms my choice.

@mikecoughlin4128 9 месяцев назад

I was surprised at your comments on the Bosch so I checked the model number. I bought the ROS20VSC after doing my homework and it was very highly rated and I picked it up on sale. Right now its $80 at Home Depot. Not sure why you picked the ROS10 but maybe the variable speed motor is the difference.

@SeaFanStudio 9 месяцев назад

I too have the ROS20VSC and have a very different experience than he did. Mine also came with a bag. Love mine!

@Boog7625 9 месяцев назад

I have a Makita finish sander that has given excellent service for over 50 years. I have dropped it multiple times from various heights. Sometimes as much as 20 feet. It just keep on working like it was new.

@MRBOBDUDESIR 22 дня назад

I have a black & decker similar to the one you're using. I've had it for about 5 years. I have not used it very much; I have had to replace the sanding disk plate twice the screws that hold the plate on melt through the plastic plate. I think you've convinced me to try the craftsman.

@Willybeanmcgraw 5 месяцев назад

Great video! Saved me a few bucks and went with the Craftsmen over the Dewalt. I never use the variable speed anyway.

@ravenheart1439 9 месяцев назад

My daughter gifted me that Ridgid..so far I'm happy with it..the slow start I'm not a big fan of but greatful for it..I don't get gifts so really its priceless comein from my daughter...an matt I was guna suggest you release some reruns, seen another guy do it, it's a good idea cause I woulda. Never have seen that build he released..

@scootermcduder5479 9 месяцев назад

I’ve went through a few different sanders and the dual handle Makita is my absolute favorite. As I’ve gotten more into my thirties I’ve developed arthritis in my wrist and hands and all the other sanders have been brutal for long term sanding.

@Skwish6952 9 месяцев назад

I have a couple Bosch cordless sander, 18v and 12v and they are quite good.

@bullpup33 9 месяцев назад

I just refinished my kitchen island using the Bosch sander. I really like it compared to the Ridgid sander I had. I feel like its built for fine woodworking as opposed to rough lumber.

@markkielman4777 9 месяцев назад

Great review!!! I have the Ridgid and like it because if you have a Ridgid shop vac it just hooks up with no adapter.

@robertsmith3518 9 месяцев назад

Nice job Mr Matt ! I have the Dew and the Sears ,I found that after I switched to the 3 m cubitron paper ,that improved the performance 100% .Cheers

@Damon_Barber Год назад

This was a great review video! It hit all the major concerns. I can’t think of anything else anyone would want to know before making a decision. That Makita had to have something wrong with it to be shocking you. That is so weird! Have you reported that to Makita to see what they say? Might need a recall if it’s not just the one you got.

@mattwatchesyoutube 9 месяцев назад

Thanks for the video Matt. Would love a video on what sandpaper is most efficient/most affordable! Merry Christmas!

@FixItFrench 9 месяцев назад

I own both Milwaukee and dewalt sanders, but they are both battery powered. both are excellent with variable speeds. That’s my favorite quality in a sander now

@russmartin4189 9 месяцев назад

I think something that may strongly affect your buying choice could be the fact that Ridgid gives a lifetime warranty on their tools. Additionally, ridgid shopvacs fit all Ridgid tools. I had an old Ridgid shopvac that died. I just had to send them some picitures and they sent me a new one. I had all kinds of issues with Ryobi. Finally, after 8 months, they sent me a new tool. I'm buying Ridgid from now on. The tools are decent quality, reasonably priced, and they fix or replace them quickly.

@chevycheeseburger3273 9 месяцев назад

I wish you would do a video on the vacuum hoses and connections

@garymiller5937 9 месяцев назад

Thank you for the comparison Matt. It was very useful! 😊😊😊😊❤❤❤

@vicdieselx 3 месяца назад

Neighbors are like "Honey look he's out there throwin them damn tools again" Great Video as always Sir

@rauljr9869 9 месяцев назад

Thanks for sharing ALL of the variety of brands and selecting the top of the best!

@TheWendyJohnson 5 месяцев назад

Thank you so much for this video! My dad bought me a Black & Decker orbital sander about 25 (gulp!) years ago and it is finally starting to slow down. I've put a lot of miles on that little workhorse and made many projects with it. Now that it's time to replace it, I knew I could count on you to give your honest opinion. I'm going with the Craftsman and will use your affiliate link to help out. Thanks again and God Bless!! (Note: I highly recommend the Black & Decker. I'm just ready to switch things up a bit!)

@tinksfawn08 9 месяцев назад

This was very eye-opening. Thank you. I’d like to see you test cordless sanders and include Kobalt, Flex, etc.

@jamesbrunk9817 9 месяцев назад

Hooking to my dust extractor was a primary consideration when I purchased my sander. I bought a rigid, which has performed well. Since then, I have seen 3D printed adapters for most of these products, so it should not be as high on the list as I had it. As a side note, the rigid motor burned up and rigid gave me a brand new sander as a replacement. I like that kind of customer service, although I still question why it failed in the first place.

@MatttKelly 9 месяцев назад

Picked up the bosch on sale recently it just screams quality.

@greg2337 9 месяцев назад

Ive had my Bosch sander for 12 years. It's been great but when it dies I'll probably go to the Milwaukee. Thanks for the review!

@StudyWithNika Месяц назад

I tried many sanders and my favorite is Bosch. Yes it is little less powerful but there are different types of sanders if you would like to remove very large amount of wood - belt sander for example.

@theautumncrone 9 месяцев назад

I was wondering if you have ever reviewed the Worx brand, and if you haven't, would you consider it? My husband and I both enjoy y'all content and look forward to new episodes! I am personally excited about Amy's new machine!! I have always wanted a lathe too 🥰 one day!!

@731Woodworks 9 месяцев назад

Thank you. I’ve only used the Worx Pegasus work tables. I have two of those and they’ve been great.

@kevinroberts9814 9 месяцев назад

I had one of those Bosch sanders a few years ago and it literally lasted less than three months. The sanding pad was the first thing to go. I think the heat from the sander caused the little hooks to melt, and it would no longer hold the sanding disk. Then the dust cannister broke when I was emptying it and wouldn't go back together. Bosch makes great routers and jigsaws, but stay away from the random orbit sanders.

@brendasmith1533 9 месяцев назад

Great video. I laughed so hard and replayed the video of the Wen when you plugged it in! The expression on your face and cat like reflexes were priceless! 😂 This video is valuable to me because I was eyeing one that you rated a 4/5 on hand fatigue and my hands won't be able to handle that! Thank you!

@brycereid7047 8 месяцев назад

I found that the Dewalt has more of a proprietary replacement hook and loop pad so no buying a standard replacement as well as the holes for dust collection which don’t line up with most sanding pads. So I used an counter sink bit to drill out hold in the sanding disc whenever I put a new one on.

@greatgrandpaswoodworking Год назад

Great video. My favorite is the Harbor Freight Hercules because of the weight. I just push it around and let the sander do the work. The only issue I have is the sand paper is extremely hard to remove.

@731Woodworks Год назад

Are you using a shop vac or dust extractor with it?

@CraigularjJoeWoodworks 9 месяцев назад

Bosch gex34 on sale, it will last as long as 2 or 3 of the cheap sanders so it’s easy to justify

@dwayneattard5265 9 месяцев назад

black and decker, DeWalt and Craftsman are the same manufacture. You can swap the pouches and with the DeWalt and Craftsman you can swap the batteries. All three of them are under the Stanley brand

@Terkinstein 9 месяцев назад

I shattered my left distal radius and had a titanium plate installed with 10 screws. being left handed has never been more of disadvantage. Using tools that vibrate are really hurt after a while, far differently than before I became a cyborg hahahaha. your video was incredibly informative thanks, I actually will use this data you collected for my next purchase, because I need a sander too. thanks for all your videos, I really have enjoyed your channel, God bless you and your family!

@Ceen328 8 месяцев назад

Something is fishy with your Bosch. I own the exact same sander and that noise is not normal. Also it never felt underpowered, compared to my 3M sander. Even the temperature is kinda weird. Only thing that I 100% agree, is that the dust collection box sucks. Nice idea with the filter an all, but it is just bad. Tho sanding w/o a vac is just always a bad idea IMO. No matter what sander you use.

@denios36 5 месяцев назад

Amazing video, exactly the information a hobbyist user needs. Thank you so much!

@philliprickman1394 9 месяцев назад

Thanks for the video. I bought the Bosch believing it was one of the best choices. Since I haven't had much experience with other brands, I thought the Bosch was ok. It looks like I need to go HD and pick up another brand. I might learn to enjoy sanding!

@dc5duben96 9 месяцев назад

great tests, helps me choose my next sander when its time to upgrade

@anthonybrasten7515 9 месяцев назад

Great video. I own a battery milwaukee, corded milwaukee, black and decker, and Hercules sander. Surprisingly tho I grab the Hercules 9/10 I love that sander.

@maximusmagni1 9 месяцев назад

Craftsman is owned by Stanley Black and Decker, the same company that owns DeWalt. They have a ton of badge engineered tools.

@CharlesHollaway 12 дней назад

I have burned up two of the Hercules sanders. I dropped a Ridgid sander, and apparently messed something up, because it just keeps going faster and faster! I bought 2 of the Bauer sanders on sale at Harbor Freight for $15 each, and they are ok, but seem underpowered and I don't care for the shape. I just ordered a DeWalt, since they seem popular among woodworkers on RU-vid. I have several DeWalt tools, and they seem to be higher quality.

@gooch-1971 9 месяцев назад

Again why your the best channel on utube, thanks for including the harbor freight sanders. I'm still new to woodworking but have learned the most from all your videos, even the old videos! The outlaw channel has also been really helpful. Thanks again and hope you and yours are doing great.

@731Woodworks 9 месяцев назад

Thank you very much!

@ChadFlynt 8 месяцев назад

Thanks for all you do. I am trying to get my shop setup for just typical crafts, do a lot of laser engraving and def wanting a planer soon. But figured I should start with a good sander. Money is def an object but I know you get what you pay for, so debating on whether for not being a woodworker truly but def love to tinker but want something that just works, between the Milwakee you show here or if I should just spend the extra cash to get the Festool. Not like it is that much more. But just want the best bang for buck and want it to last. I figure I will be finish sanding stuff I engrave and some cutting boards and such.

@holtonjackson3324 9 месяцев назад

I own a lot of these random orbital sanders including the Dewalt, craftsman, and the makita. I have always enjoyed my makita more. I am less concerned about dust collection though.

@steveferguson1232 9 месяцев назад

I have the Festool etc125 (my ver first Festool bought last year) with ct15 mini. The difference is mind blowing. My old go to is the Porter Cable 5” ra electric sander

@MrNated25 9 дней назад

Thanks for the video and testing. I think I found my sander.

@alcameron1999 9 месяцев назад

Heat buildup is significant because the hook is attached to your sander and is costly to replace. When the hook melts the paper will not stay attached as long. Nice evaluation, I would change the rankings based on heat.

@chasew1653 9 месяцев назад

My cordless ridgid is unusable without diablo sandnet. Dust collection is great with a standard shopvac. Performs as well as corded ridgid in my opinion. Good video, sense a lot of project farm behind this video :)

@joeport6823 9 месяцев назад

You have to realize that there is a problem with that particular long handled Makita. That should be taken back to the store for a refund or exchange. I own one of those and have had no issues. Good video any how.

@robertschagen9016 9 месяцев назад

Ditto

@JustMike919 9 месяцев назад

I also have it and the one in the video was for sure defective

@michaelreimer951 9 месяцев назад

Agreed, it has done me well over the years.

@247Combat 9 месяцев назад

The Flex sander with turbo is pretty good imo

@adamaustin22 Месяц назад

First of all.... I love and appreciate you brother! Probably the face I see more than all the others when it comes to woodworking/tool vids, because you do an awesome job and usually come with useful info in every watch!! But... You got that side piece and we see you!! Her names Milwaukee!! lol No doubt their making some good stuff...again. I know it shocked ya so that knocks it down but that Makita appeared to be right there with it at least or better on dust collection and it got half the score on that part while Milwaukee stood alone on top. All love brother, just giving ya tha business! With you 100% on that Dewalt sander tho! You killed it either way!

@731Woodworks Месяц назад

“Side piece.. Milwaukee” 😂 😂 👊🏻

@bobritavr860 9 месяцев назад

Awesome comparison! I thoroughly enjoyed this video. Thank You Kindly

@LeviBulger 3 месяца назад

I agree that the Metabo has an awful collector but with a shop vac or just a simple zip tie, it's the best bang for buck of all of these BY FAR in my opinion. It is insanely comfortable to use and you get the job done so quickly and with EXCELLENT RESULTS. I also have the same experience with their trim router in that it's so ergonomic and lightweight, yet it cuts superbly well and I don't feel like I have to put any effort into it at all. I knew no matter how well it performed, you would give it a no recommend just on that collector alone, and I get it... But if you're like most people who use shop vacs or know how to work a zip tie or piece of tape to improve the collection you really shouldn't overlook Hitachi Power Tools (Metabo is a dumb name) For under 50 bucks, the Skil sander isn't too shabby either in terms of overall results. Also has a shite collector but as far as results are concerned, you can do a lot worse for the price. I mean,it's 30 bucks and has some cool attachments, including a flex attachment for round objects! Different sands for different hands, as they say.

@thefrankperspective4247 6 месяцев назад

Dude, I remember that sink video. We all felt that.

@grahamcairns2249 9 месяцев назад

I have a 15-year-old ridgid that I love. I bought the Milwaukee as an upgrade but find my old ridgid works better and is more comfortable. I have also dropped it countless times 😂😂

@djhaack9239 9 месяцев назад

You do amazing woodworking and great helpful videos.

@monkeyman8265 6 месяцев назад

Regarding craftsman and dewalt. I have the first gen dewalt modular tool box system the T-stack. At the time craftsman had there line the versastack those to brands tool boxes were identical other than color.

@paulellis84 Год назад

I have the dewalt and I love it. Thank you for the review!

@scruffysanta8442 Год назад

well done sir, thanks for the info and for sharing the wealth so to speak with the giveaway!

@Damon_Barber Год назад

Hahahaha!!! I just had a thought! You should back over one with your truck to get the trolls rolling! Hahahaha!!! That would be an awesome short!

@731Woodworks Год назад

lol yes it would

@3kainos 9 месяцев назад

Bosch really shines with their Festool clones, the 6” GET75-6N and the 5” GET65-5N. They’re around $300, so less than half of Festool, but they are simply outstanding. They have turbo mode for rapid material removal and normal radon orbit mode. Outstanding performance with dust extraction & 3M Cubitron paper. But yes, you’re right, their sub-$100 palm sander is garbage.

@Shannon-v3r 9 месяцев назад

Mine has been nothing short of amazing. Especially, like you said, since I plunged into the 3M mesh. I’ve dropped it I don’t know how many times now. And I literally have to try to get swirls with this thing, I can’t say enough about the GET75. As much as I’d love a Rotex, I really can’t see it being that much better

@castlevaniaking5 9 месяцев назад

I have only sanded maybe a total of an hour or so with the bauer and agree it is a bit of a meh sander. It gets the job done a d I don’t regret buying it especially since I think it was $19 when I got it. Aside from the drop tests I definitely agree with all points here😊

@damiondifranco2967 9 месяцев назад

You're very good at woodcraft, but I think you've found a real calling being very enjoyable to watch and a great judge of useful information. Well played sir and goodonya

@mariondorsett 9 месяцев назад

Because I don’t use the variable speed, I replaced my Rigid with the craftsman. The Rigid was nice, but failed after 1 yr. The craftsman has been good. I think I liked the angle of the dust port better on the rigid.

@JonAlycia 8 часов назад

Not providing product model numbers has made it difficult finding and purchasing the exact ones you've mentioned

@jimfeaster4837 9 месяцев назад

Could you test 12 inch Hercules slide compound an 12 inch kobalt slide compound...😊

@r3woodcraft 2 месяца назад

I have had trouble with my Malaki throwing off the sandpaper sense I have had it. I even changed the pad and the new bad did the same thing.

@chris-C8 9 месяцев назад

I've had the Bosch sander since July 2023, which is around 4 months since I started having issues with it. I'm already sending it in for warranty because the dust canister vibrates off the sander while in use and throws dust all over the shop. Whats even better is that they only offer a 1 year warranty on their corded products. Very disappointed.

@happyhour5690 9 месяцев назад

Super tip: use one orbital in each hand so you can finish in half the time and it helps towards your black belt in karate

@chrisforker7487 9 месяцев назад

Surprised the Hercules did so poorly. I just bought one to replace a DW. I found it infinitely better than my old DW in every aspect.

@LYTOMIZE_Woodshop Год назад

Amazing dedication to the experiment and the video, Matt. Thanks for sacrificing your hands and arms over a couple days - this is WAY more than mere entertainment!

@731Woodworks Год назад

👊

@davidjames-qg6im 5 месяцев назад

Like to see testing of Menards Masterforce power tools. You don’t see many reviews of their products.

@Green3062 8 месяцев назад

Review the 3M sander. I know it's very expensive but I would like to know your thoughts.

@danieldube3576 9 месяцев назад

Thank You for putting this out, great info.

@justinpoe1392 3 месяца назад

I bought the "Craftsman" orbital sander after watching this video.😊

@Evolucion7 9 месяцев назад

I was given that Craftsman sander as a Christmas gift a couple of years ago, and every time I use it I'm surprised at how good it is for what it costs. My only complaint is that I wish it were a little quieter, but that's really nit-picking.

@baron1c Месяц назад

Literally the Lord’s work. Thank you for this. I might be able to acquire the rigid but is not, I will be buying the dewalt!

@Damon_Barber Год назад

In absolutely LOVE that shirt!!! NICE!! Will comment on the video after it finishes

@RyanSeverson93 9 месяцев назад

Great review as normal. With that being said I’m curious to know how the festool Random Orbital Sander ETS 125 REQ-Plus performs before dropping $250. I know it’s much more than these were but if you do a lot of sanding it could be worth it. Maybe they would give you one to do a review

@brucehansen7949 9 месяцев назад

I wish I seen this video before I bought the bosch, all the reviews i read said it was better than DEwalt , although i will say the dust collector does a better job than my last dewalt sander, gotta empty the plastic box about every 20 minutes but it seems every sander is that way. It performs decently, never done a heat test so thanks for doing that, I may rig it up to my vacuum because it does seem like I burn through sanding disc's faster. How long have you have your festool sander? Everyone says there the best, but how about a 10+ year test?

@mwoody4560 9 месяцев назад

Nice review. I wonder if the cordless counterparts would be much different? of course probably none of them would be under $100 unless you buy a tool only option.

@allan5721 Год назад

Have the Bauer, and the dust collector is terrible. After a few uses mine would not stay on the machine. The vibration would work it loose and it would fall off. And it stalls, like Matt notes. I was able to cut down an adapter I found at Home Depot to connect it to a shop vac.

@leesvapereviews 9 месяцев назад

Great video as always hope you have a great Christmas

@731Woodworks 9 месяцев назад

Thanks! Merry Christmas!

@JohnClark-tt2bl 9 месяцев назад

Weird, I've never noticed my Bauer sander bogging down. Of course, you're not supposed to put much pressure on it to begin with, so I'm not sure how important that actually is. Dust collection, yeah it could be better. Granted I'm not using a vacuum with it either, those little dust boxes usually suck compared to that.

@boatbeard7767 9 месяцев назад

At first I was surprised by the Makita and Bosch results, but then I realised we buy the high end Bosch and Makita gear and get good commercial performance from them... I have been using one Makita for fifteen years, another for twenty - so probably not comparing the same thing. My Bosch I bought second hand, several hard commercial years second hand from a house painter when he moved interstate and upgraded to Festool - I rate it very well. Something is seriously wrong if you are getting shocked from a Makita tool - why didn't you return as defective - might be a lot more wrong with it?

@danielt9358 9 месяцев назад

I have the dewalt and a festool. I prefer the dewalt for heavy sanding and reducing the time spent sanding. The festool is nothing but a good finish sander.

@jimfeaster4837 9 месяцев назад

Wow super review I like!😅

@731Woodworks 9 месяцев назад

Thank you so much 😀