I Upgraded My Snare Trigger | DIY R-Drums Dual Trigger System | Part 1:2

Подписаться 5 тыс.

Просмотров 21 тыс.

50% 1

In this video, I share with you guys how I built a solid dual trigger system for a snare drum that I can rely on to play consistently and accurately. So far I have minimal issues. It's not the cheapest and it's not meant to be. I opted for quality without having to do any research to be able to perform reliably. I went for what is proven and simply built around it. I probably forget some details and info. So I will most likely edit this space. Thanks for watching!
STL FILES - payhip.com/b/dUEpq
CHAPTERS
00:00 Intro
01:14 Parts List
02:08 Test Fit
03:15 Finishing
04:07 Build Breakdown
10:45 Playing Example
11:55 Thoughts
PARTS:
L Bracket (*the one I used) amzn.to/3bL4W7O
L Bracket Slotted - amzn.to/3ubFgri
L Bracket EK - amzn.to/3fcKVJt
2020 Aluminum Profile - amzn.to/3f9V9u2
T Slot M4 Nut - amzn.to/3fDErlQ
M4 Screws - amzn.to/3vdU363
3.5mm Female connector**- amzn.to/3oGoSOa
Pintech Silentrim - amzn.to/2SlhHPi
Drum-Tec Real Feel 3-ply Mesh Drum Head - bit.ly/2V9nUNr
R-Drums:
Round Decoupler - bit.ly/3fAkeNE
Dual Trigger Set - bit.ly/3fCxod3
OTHER TRIGGER PARTS:
✅ MODULE:
Roland TD-17 used/new - ebay.us/fTXCxn
(budget module option) Roland TD-9 used/new - ebay.us/nvDTHp
✅ INTERNAL DRUM TRIGGER:
[SOLID OPTION]
UFO Kick Trigger - ebay.us/X1RJMy
UFO Side Arm Internal Trigger - ebay.us/QpwZT2
UFO 3ply Mesh - ebay.us/Ofbdej
Jobecky Trigger - bit.ly/3h6MhoJ
This is of course optional, you can always use any material you can work with.
*Amazon Affiliate links above. Thanks for your support!
**This connector isn't the one I used, but if some of you buy this, DM me on Instagram I will modify the 3.5mm holder for you. I got mine at a local custom cable shop.
Socials - linktr.ee/projectbeatsofficial
#DIYEdrums #dualtrigger #edrums

Видеоклипы

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@ProjectBeats_ 2 года назад

STL Files for this project. - payhip.com/b/dUEpq Thanks for your support!

@matthiasedwards294 11 месяцев назад

Bloody legend! This is fantastic!

@TierryslavendelplantPlant 4 дня назад

That is very nice. I am at this moment converting an acoustic set. Your video made a few things clear. Thanx

@ProjectBeats_ 4 дня назад

Thanks for sharing!

@christyler1647 2 года назад

Excellent professional looking job!

@ProjectBeats_ 2 года назад

Thanks!

@willdavid6697 Год назад

Great build and excellent exoskeleton!

@ProjectBeats_ Год назад

Thank you! 🙌🏽🙏🏽

@gonzorudeboy 3 года назад

Great work!

@ProjectBeats_ 3 года назад

Thanks!

@mikeydreadmastalski4345 2 года назад

Awesome build.. I'm going to convert an acoustic bass drum. Thank you for the inspiration!

@ProjectBeats_ 2 года назад

Nice! Thanks for watching 🙏🏽

@johndef5075 2 года назад

Very cool!

@ncimson5318 11 месяцев назад

Yan ang Pinoy! One of the most solid built I have seen. Very nice pare

@ProjectBeats_ 11 месяцев назад

Salamat! 🙏🏽🙌🏽

@Spagz 7 месяцев назад

This is so great! 🎉🎉🎉 Looks awesome. Very professional looking and well thought out. I will provide my shipping address and specs ror my drum sizes below 😂. Wish i had access to a 3D printer and more importantly, the ability to use the CAD software for the design. Keep the DIY stuff coming. Thanks 👍🏻

@hifinphoto Год назад

beautiful trigger.

@wjl123 3 года назад

Pretty cool, reminds me of the jobeky drum trigger

@ashyum6913 3 года назад

Cool stuff. Im planning to upgrade my alessis nitro snare. Im thinking to print a drum shell maybe 12 inch.

@mecdrum7 2 года назад

Very cool

@mikestein1024 2 года назад

Just to give people an idea I took a used Roland kick tower I had laying around and screwed it into my kick drum shell and cut a small hole in a bass drum head now I have an excellent triggering acoustic electric bass drum , love your videos man thanks for what you do

@ProjectBeats_ 2 года назад

Thank you! That is a great idea. Was thinking of doing a similar thing. I went with rdrums for convenience.

@mikestein1024 2 года назад

I think I can do this if I just knew how to wire the trs jack block to the piezos I know you showed the diagram but that’s where I get intimidated

@Colognedrummerboy 2 года назад

Hi, thanks for your Video! You wondered about the tip on top of the triggercushion. The tip is there to prevent the foam of the cushion to get rubbed of by the meshhead ;-)

@ProjectBeats_ 2 года назад

Ohhh, there you go. Thanks for that! 🙌🏽🙏🏽

@mikestein1024 2 года назад

Another idea is to use fish tank tubing for a rim guard , it’s clear so it looks more natural

@user-uf1oz9bu4d 5 месяцев назад

thanks for your video, it's one of the best I've seen congratulations! I have some questions to ask you: the aluminum profiles, I think and hope are easily recoverable, but I would like to know how you made the base of the trigger, which is installed on the three aluminum profiles, I understand that it is very particular. Also, are the two piezo triggers the same or is the rim trigger different? Which brand you suggest about trigger kits? I'm using an old, but still functional ROLAND TD-8 module and I also use the rim, not often, but I happen to use it. thank you for your precious support

@ProjectBeats_ 4 месяца назад

Thank you! Yes it’s a 3d printed part. The STL printable soft copy is linked in the description. However you can do without it. You can use any round metal disk or something similar.

@randychesbro6220 2 года назад

Where did you get the center foam under your trigger.?

@Lemonard0 Год назад

Great stuff! I’m planning to build a DIY snare for my kit but was wondering if it’s worth going for the 3 side trigger setup some newer snares have (like the Roland PDA120L) rather than the one central cone. I hear it plays great and avoids hot spotting issues, you think it’s worth the extra work? Thanks

@ProjectBeats_ Год назад

Thanks man! I think really depends on the time & resources you’re willing to spend on it and what having those extra stuff means to you. If you know a lot about the mechanics on how it all works and what usually fails (wc I’m not tbh) then it’s probably worth the trouble. For DIY the simplest solution tends to be the best one imo.

@trevorbelmont4633 Год назад

You have a triple cone trigger video?

@nahumamed9772 4 месяца назад

Excellent work, one question, where do you connect the trigger output on the Roland module?

@ProjectBeats_ 4 месяца назад

Thanks! TD17 Roland snake has a snare line. It’s a dual zone cable. It’s plug and play

@simonbmaster 6 месяцев назад

Where can i buy the triggers fand others accessories from? Hell

@RockMack02 2 года назад

Ser saan pwede mag order nang ganyan full set up kit?

@JunnoTantra 3 года назад

Very cool. Can you share the 3D model for all of those stuff? (the base, nut, and cable clip) I want to print it too, but I don't have any experience with 3D modeling Thanks!

@ProjectBeats_ 3 года назад

Thanks! Supporters via “buy me coffee” will be sent all STL files. 🙏🏽

@JunnoTantra 3 года назад

@@ProjectBeats_ oh, it's on the video description. Missed that before 😅

@romainhusson3206 2 года назад

Hi, is it possible to have the stl of the support of the piezo head? Thanks

@ProjectBeats_ 2 года назад

Link in description. Thanks 🙏🏽

@frederickriegel997 3 года назад

Hello ! what kind of foam do you put under the cone piezo ? What the point of putting a circle of metal just under this piezo ? I thought the piezo had to be directly on the foam.... thanks !

@ProjectBeats_ 3 года назад

Hey. The round foam is a pro decoupler by r-drums. It comes with a metal top to put the piezo on. I don’t exactly remember the function but it has more to do with getting more accurate/stable response, or information transfer from hits to piezo. Vdrum tips used a metal top with a DIY foam decoupler on one of his videos too. This is a pro version by r-drums.

@frederickriegel997 3 года назад

@@ProjectBeats_ thank you :)

@magicdrummer411 Год назад

Will this build and your high-hat build work with the Alesis nitro mesh module?

@ProjectBeats_ Год назад

Ya. Roland - alesis pads mostly interchangeable.

@sammytuga9634 2 года назад

How much cost the snare triggern pls??

@looseburdens4259 2 года назад

Woahh that's a great trigger setup you made man, is there any particular reason you opted for a three spoke design rather than a more common 'bridge' type design?

@ProjectBeats_ 2 года назад

Thanks! I was planing on 6 spoke but dint want to bother cutting the alu profile to length. From what I understand, more spokes = better rim trigger response.

@johndef5075 2 года назад

@@ProjectBeats_ thats interesting. I have a trigger with just a one arm mount. It works well but i might put a bar of metal or wood under that connects both sides and see how that affects rim response.

@windelsanchez7258 2 года назад

Hi.. I brought the 3d print yesterday. Thanks for the file..what is the name of the trusses or the bar you are using?🙏🙏

@ProjectBeats_ 2 года назад

Thanks so much! Do you mean the 2020 Aluminium profile/extrusion?

@windelsanchez7258 2 года назад

@@ProjectBeats_ yup bro got it..thank you 🙏👌

@romainhusson3206 2 года назад

Hi, is it possible that you send the stl of the cable tie? Thank you

@ProjectBeats_ 2 года назад

Cable organiser is from thing verse. I forget where exactly but hope this helps. - www.thingiverse.com/search?q=cable+clip+management+2020+&page=1&type=things&sort=relevant

@BoxlessDrums 6 месяцев назад

Nice man! How’s this build holding up after a couple years?

@ProjectBeats_ 6 месяцев назад

Thanks! Some lose bolts in the beginning. Fixed with loctite. Functions the same way today, bit of pad setting management here and there. altho tbh not getting much use lately since I’m playing the acoustic kit more.

@romainhusson3206 3 года назад

Hi, what trigger do you use for cymbals?

@ProjectBeats_ 3 года назад

Goedrum Triggers on ebay. You can find parts list in this video description ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-A0gV27jCgGY.html

@dinoandreozzi8115 3 года назад

How much would it cost the complete snare drum conversion if I buy it directly from You? I like the entire conversion but I do not have the ability to build it by myself.

@ProjectBeats_ 3 года назад

Sorry mate. Not planning on building to sell. Really busy with work as we are back on semi lockdown here in SG.

@mecdrum7 2 года назад

I’m doing a build after selling one of my drums out of three.

@moonmeister5766 2 года назад

bud, vdrum tips - Making a High-End E-Drum Snare u even use hes shop

@ProjectBeats_ 2 года назад

Of course, great channel and resorce. I dint know he owns r-drums. That’s whats up.

@DrummClem Год назад

Very cool build. So nice and clean ! I went for a combination of this build from Vdrum Tips ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kgRkO_zj30g.html and yours, since I'd rather have some foam to decouple the head piezo from the shell one.

@mecdrum7 2 года назад

Cost