I want a CNC Plasma Business. SO I MADE ONE | Motors, Belts, Electrical | Pt. 2

Подписаться 2,7 тыс.

Просмотров 13 тыс.

50% 1

Thanks, to JD's Garage for inspiring me to make this DIY CNC Plasma Cutter.
Products used in the video/Amazon associates links(I earn commission if you choose to purchase these products at no extra cost to you)
1: DIN Rail kit -
amzn.to/43NKFYT
2: computer monitor plug -
amzn.to/3vqJ6DF
3: On/off switch -
amzn.to/3xal9Rh
4: 4 pin panel mount connector -
amzn.to/3vr2S1Q
4.5: 2 pin panel mount connector
amzn.to/3J3Eqqe
5: NEMA Electrical Enclosure -
amzn.to/4ajzeuC
6: Arduino Uno DIN Rail Mount -
amzn.to/3xpVbt6
7: 5V Relay -
amzn.to/4aBU34c
8: Wire Ferrules Kit -
amzn.to/3J22ZDY
9: Ferrules Crimping Tool -
amzn.to/3vBzhTf
My stepper motors were purchased through stepper online. so I may have different belt/pulley sizes.
10: GT2 pulley -
amzn.to/3TWtBwz
11: 10mm bore 5.08mm pitch pulley -
amzn.to/3J0OS1P
12: GT2 Belt -
amzn.to/3PHtK4g
13: 10mm width x 5.08mm pitch belt -
amzn.to/4cHtcoX
15: Soldering Kit
amzn.to/4aeiZic
16: Limit Switches
amzn.to/3J05qH4
17: Arduino Uno REV3
amzn.to/3vAMADq
18: Arduino Uno Panel mount Connector
amzn.to/4b8ZCaP
Description may or may not have been made by AI.
Embark on an exciting journey of creating your own CNC plasma cutter from scratch in this captivating and entertaining video! Join us as we dive into the world of fabrication and CNC machining, showcasing the process of bringing a DIY CNC plasma cutter to life. From brainstorming ideas to welding metal frames and wiring electronics, experience the highs, lows, and triumphs of building your very own CNC machine. Perfect for small business owners looking to explore the possibilities of CNC plasma cutting technology, this video offers inspiration, insights, and a sprinkle of fun along the way. Don't miss out on this epic adventure - subscribe now and kickstart your small business dreams with DIY innovation!
Keywords: DIY CNC plasma cutter, small business adventure, CNC plasma cutting, CNC machine build, fabrication journey, CNC machining, small business inspiration, DIY CNC technology, plasma cutter creation, CNC plasma cutter entertainment, small business innovation, DIY CNC plasma cutter tutorial.

Развлечения

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@jakeaustin901 4 месяца назад

Since you write your own subtitles, I want you to know it's called an "axis", not "access".

@ThyialIndustries 4 месяца назад

Lol. I don't write my own. They are auto generated. But thanks for the heads up.

@nemessmu 3 месяца назад

Hello I want to thank you for the project process I managed to build it!!! The only problem that I have is whenever the plasma turns on, it kills my arduino and laptop.l and it resets everything. Can you maybe help me out with a bit of guidance , in how to sort this out ? Kr, Sam

@ThyialIndustries 3 месяца назад

I'd love to help. Unfortunately I can't do much without seeing the wiring.

@QuentinEnriquez-q4l 28 дней назад

I have mine built just like yours with the updated jd garage electronics unsure how to get both y motors in the program if you do put plans out I’d definitely buy them

@ThyialIndustries 28 дней назад

@@QuentinEnriquez-q4l it's not super difficult. A quick Google search should help

@photorealm 20 дней назад

Do your motors get hot, like 130 degrees F ? My bigger one gets pretty hot but I hear that can be normal.

@ThyialIndustries 20 дней назад

@@photorealm mine do get warm. I haven't checked actual temp, but yes they are made to run warm

@jimmer411 3 месяца назад

Just an FYI, you dont need to add subtitles to your videos. RU-vid can auto generate them. Personally I find the imbedded ones distracting.

@ThyialIndustries 3 месяца назад

thanks for the heads up. Maybe its a personal thing... i watch everything with subtitles lol

@youmebornfree 5 месяцев назад

I like the hustle to get a youtube channel up and running. I know you are going for edits that are like what you see out in the popular youtube content creators with little funny blips etc. I think it takes away from something more authentic to your style. I get we copy what is successful to try and grow but I think you have a style all your own and you could let it out more. The more you create the more refined you get at that unique quality and you might not find it copying others.

@ThyialIndustries 5 месяцев назад

Thanks for the advice! Yeah I'm constantly trying different approaches to see what works. Maybe you're right, just have to find out what my unique style is. Hopefully that comes sooner than later lol

@ltaylor4444 3 месяца назад

Can you share the wiring for the two y motors? I am doing this exact setup

@ThyialIndustries 3 месяца назад

I may make a full plan in the future.

@illudedCeption 5 месяцев назад

5:46 i wanted to scream :D the ferrils are used for stranded wire what goes under a screw in terminal most newer terminals now have a small tab under the screw so the screw is not pressing on the strands directly

@ThyialIndustries 5 месяцев назад

🤣 well dang... I could have saved some time lol..

@eximiamedia7897 2 месяца назад

What firmware are you using? Marlin?

@ThyialIndustries 2 месяца назад

@@eximiamedia7897 grbl1.1h

@nemessmu 4 месяца назад

Hey Awesome JOB I was lucky enough to find your video, good job again. I also purchased JD s project, but I spotted that your CNC is way bigger, and I was hoping you could share with us the size of it :D , length , width , height ?

@ThyialIndustries 4 месяца назад

It has a cutting area of 3ftx4ft and approximately 3ft tall

@kimmoselin5774 5 месяцев назад

Just me, don't mind this: Please 'skip' the background music, it's hard enough to follow your spoken explanation bcs. my native language is Finnish (FINLAND, you know?). The tutorial itself is 'WELL DONE' and interresting :) You got 'extra stars' for showing up the failures with them broken 'taps' ;)🤗

@ThyialIndustries 5 месяцев назад

I will take it into consideration!

@somethingtowatchhere 21 день назад

I like it

@ThyialIndustries 21 день назад

Me too.... Me too 😅

@Dragonmastur24 5 месяцев назад

i am so distracted by the incorrect closed captioning. Its my problem i know- but its gaslighting me the whole video cause im like- did i hear it wrong, am i going insane?? maybe... lol. it sorta says low quality to me tho too

@ThyialIndustries 5 месяцев назад

What was incorrect? Maybe I missed something

@bobrossi1185 4 месяца назад

Definitely like it iam building like yours too.

@Twopinesdesigncompany 3 месяца назад

Looking good mate. Built my first cnc a few years ago, they’re huge time sucks but the knowledge is priceless. One thing, you don’t solder the ferrules, they’re for screw terminals.

@ThyialIndustries 3 месяца назад

@@Twopinesdesigncompany I can agree with that! And thanks for the heads up 👍

@MechanicalAdvantage 6 месяцев назад

Where are you based? Nice work on the build series.

@ThyialIndustries 6 месяцев назад

Thanks, South Wisconsin!

@thedadchronicles 4 месяца назад

I'm laughing, not at you, but realizing this is what I must look like when doing... Everything.

@ThyialIndustries 4 месяца назад

🤣 it's fine you can laugh at me. I do all the time

@ryanblevins8671 4 месяца назад

5:49, you know you can buy wee spade connectors they are great, would not be into soldering myself fk no lo. love the videos!

@ThyialIndustries 4 месяца назад

Yeah I definitely thought about it. Just thought soldering was the right way to go this time around. Maybe next I'll go that rought

@ItsJustJake97 5 месяцев назад

What was the total cost, since you ended up modifying the original plans?

@ThyialIndustries 5 месяцев назад

Not 100% sure but I'd say anywhere between 800-$1000. I went a little overboard with the electronics. I'm also getting a hypertherm 45, which is about 3Gs.

@ergenekon4l 4 месяца назад

Hello dude. Are you a mechanical engineer. I took a look at your work I saw that you were knowledgeable about everything. What programs do you use for drawing, modeling and CAM (g codes) Please forgive me if I was impertinent.

@ThyialIndustries 4 месяца назад

I am actually an electrical engineer. Right now I've used solidworks and fusion 360 for 3D modeling. And Master cam for can software.

@ThyialIndustries 4 месяца назад

Cam software**

@ergenekon4l 4 месяца назад

@@ThyialIndustries you are genius bro. Do u have grabcad profile?

@puntabachata 6 месяцев назад

You might want to check out the one by JD's Garage

@ThyialIndustries 6 месяцев назад

I did. That's where a lot of the inspiration came from

@Transformers1983jd 5 месяцев назад

Guess you never listened to him in his build videos. He did. He making his own version.

@ThyialIndustries 5 месяцев назад

@@Transformers1983jd I know some people just skip around to try and find the important bits. Though, I'd like if they watched the whole thing lol

@Transformers1983jd 5 месяцев назад

After watching your video I just might do your modifications to mine. If you do a complete video on how to and a build program that would be great.

@ThyialIndustries 5 месяцев назад

It's on my list, not sure when I'll get to it.

@Metal2Venom 6 месяцев назад

Looks great I'd definitely love more details on the electronics and how to do them as I've got jdgarage plasma plans but want to do twin rails like yours with limit switches and kill button but I'm rubbish when comes to wiring and electronics

@ThyialIndustries 6 месяцев назад

I'll keep it in mind. I've had some interest making complete plans like they did. But that probably won't happen for a while. There's a lot of work that goes into thanks. Thanks for the comment!

@kerryholt7102 4 месяца назад

I recently built a modified jd garage table as well.

@ThyialIndustries 4 месяца назад

Just watched your short on it. Looks pretty good 👍

@liwajaya76 5 месяцев назад

Very good bro, what size pipe rod is used for this CNC?

@ThyialIndustries 5 месяцев назад

2x2x16ga square tubing

@Transformers1983jd 4 месяца назад

Man that moves smooth. Mine doesn't even do that. Man I need you set up.😊

@ThyialIndustries 4 месяца назад

🤣

@nanobritech2631 2 месяца назад

Thank you gor the update

@ThyialIndustries 2 месяца назад

Yes sir

@bobreichel 5 месяцев назад

I hope you didn't build those 3d printed parts with pla. Petg is much better.

@ThyialIndustries 5 месяцев назад

Aluminum is best lol. I printed with pla and will have machined aluminum soon

@bobreichel 5 месяцев назад

@ThyialIndustries maybe but aluminum is expensive especially machine aluminum unless you already have a cnc Bridgeport and blocks of aluminum.

@bobreichel 5 месяцев назад

@@ThyialIndustriesI'm doing mine in petg and possibly upgrading to polycarbonate in the future. Will see. The petg may well do the job, but I am wondering if a wider belt or dubble belt may better the longevity. 🤔

@ThyialIndustries 5 месяцев назад

@@bobreichel could be. That's why I was originally a little afraid of...by making things "cheap". You sometimes have to sacrifice quality/longevity

@bobreichel 4 месяца назад

@@ThyialIndustriesI don't know if I would say that. I mean, I've made things cheap and they've outlasted some of the stuff. I would pay 10 times the money for so it all depends, but a little insight can help you to make it better than maybe it's original plan which you have done.

@mattodombigoscustoms9957 4 месяца назад

Watched all these videos

@ThyialIndustries 4 месяца назад

Hell yeah!

@arturnowakowski6843 5 месяцев назад

I am waiting for next video!

@ThyialIndustries 5 месяцев назад

Me too!

@eclecticmakerspace 4 месяца назад

Good progress. Keep grinding!

@ThyialIndustries 4 месяца назад

I will try 😁

@owenjohnson5030 6 месяцев назад

I bought all the parts to do exactly what you are doing, including the dual y axis motors.

@ThyialIndustries 6 месяцев назад

Awesome, how close are you to completion. From the beginning it's taken me about 2 months of on and off work

@owenjohnson5030 6 месяцев назад

@@ThyialIndustries I got all the motors working about 3 weeks ago and haven’t touched anything since. I’m also in the middle of remodeling the master bedroom and the kitchen is next. All while working a full time job. I have to find time to work this into my schedule.

@ThyialIndustries 6 месяцев назад

@@owenjohnson5030 lol I know how that goes. Well good luck

@agguilarmetalwork4494 6 месяцев назад

Looks 😎👍🏻🤜🏻🍺

@ThyialIndustries 6 месяцев назад

Thanks!

@3DAstroTC 4 месяца назад

Amazing dude! Keep it up!

@ThyialIndustries 4 месяца назад

I'll try lol. Thanks

@3DAstroTC 4 месяца назад

I'm in a similar boat. I make decent enough money, but creating things, especially my own designs, that's my passion. I just test fired my machine yesterday, it was a GREAT feeling! Now I need to fine-tune and do some cord management. Eventually I'll build a 4x4 model.

@ThyialIndustries 4 месяца назад

@@3DAstroTC what do you have currently?