yes, but did they come to talk to you because you are average joe customer or because you are a youtuber? I'm betting average joe wouldn't have gotten a call.
And this is one of the main reasons I watch your channel. The utmost in honesty. It is very much appreciated. Something that is so lacking in today's world.
I'm an engineer and at my last company had to review returned products as part of my duties. Most of the returns were typically something the user did wrong. Either we could not duplicate the problem or they changed a setting that was creating the limit they complained about. Also they would complain of leaking products, but the devices would be clogged up with teflon pipe tape so it could not seal properly and would therefore leak. So part of the return process was education to the customer that came from expensive engineers doing evaluations and writing reports. The other major problem we had was lack of information about the return.
Pro tip (as an ex CS rep); If you already did something they're asking you to do, tell them, tell them *how* you did the action, tell them your results, and then ask them if you need to repeat the action. There might be different steps, or details, they specifically need.
That AMS MB was the exact one I had customer service assist with. I was buying extra ams parts and saw the AMS needed an updated MB from the kick starter unit I had. They sorted me out in a day and I had that part in less than a week. I did not mention I had a channel(even if I had it would have been 50 subs). Bambu customer service has been solid the 1 time I used them.
when I tried to get a new 3d printer I was told the bambu lab has a bad customer service, but based on my experience, they are actually way better than I expected. Good job.
Level 1 customer service has a tough job. I used to do that internally in IT in an oil company. Yes, being nice to customer service will make their day.
Lived that life too... A lot of angry people. Then at the end of the call they wanted my phone extension and they got angry again when I told them I didn't have one I'm just in a phone pool and you get who you get.
Thanks to you, my opinion of Bambu has been elevated once again. They seem like a great bunch of people that really care and stand behind their product. That's what I luv about a bunch of engineers that get together to start a business. The result is a product that they actually want for themselves too.
this is truly the guideline that all should set the bar to be. why run a business you aren't passionate about creating a product that doesn't enrich your own life? fundamental stuff but it's really true!
Outstanding video! I appreciate the candid update on your AMS saga. I have a Kickstarter AMS that is still operating with the original components. It’s good to know they will be able to support me if/when the time comes. I don’t do many multicolor prints and even the ones I do don’t require many filament changes, so I’m sure that greatly reduces wear on my AMS. I did take apart the second stage feeder and clean out filament fragments when I was having filament feeding problems and the filament was getting ground up by the feeders. My solution has been to stick to filament brands that work reliably for me. Less adventurous, but more trouble free! I don’t really have a need for that much variety in colors and PLA meets my needs for my Cigar Box Guitar parts. It is amazing how Bambu Lab has jump started 3D printing; I’m looking forward to their large format printer. I’m sure it will reflect what they are learning from users worldwide!
I doubt they would have sent you a new AMS, and I highly doubt they would send you a whole new printer + AMS if you werent a content creator. Thank you for showing how creators get special treatment vs normal paying customers.
This is an amazing video. Props to both you and Bambu Labs for admitting that you got things wrong and not trying to cover it up. This alone makes me want to get a Bambu printer when money isn't as tight and you have earned my sub.
Fantastic information and great to know Bambu lab have fixed the issue. Good on Bambu lab. I will definitely be getting one.well p1s combo. Many thanks 😊.
I had a board in my X1C toolhead fail and Bambu Lab support was awesome. Lodged a support ticket on Monday and by Tuesday afternoon they had walked me through the process to diagnose the fault, verify that it was my printer, and organised to ship the replacement board. And this was while their support site had a big banner up apologising for delays because they can't get more support staff. They really do have the most comprehensive and helpful wiki I have ever seen.
Thanks for acknowledging customer support for issues like this. I've been in customer support myself some time ago and you'd be amazed about the strange things I have seen. If a piece of expensive equipment gets broken, sometimes people get stressed and skip important steps over an over again (this happened to me too once or twice): "Sir, can you please make sure that cable A is connected at port B, then switch the device off and on and try again" - "Yes, I already did this multiple times and it still does not .... O hang on ... I had it plugged in port C... I just plugged it in port B and guess what ... It works" It takes a skilled customer support persons to be able to get a customer relaxed enough to go through a procedure step by step without skipping one😁
I have worked in IT for over thirty years and have found smart people try to overthink the problem and really smart people try not to think at all and trouble shoot one step at a time without assuming anything. I think your a really smart person and like all really smart people your entitled to lapse once in a while. I have studied a number of your online videos and they are wonderful and very, very helpful. I really appreciate your candor in this video it makes you very special. Thank you.
I don't think your approach to testing and analyzing Bambu's Customer Service response was wrong. I probably would have done the same. You wanted to test a hypothesis about what their response would be outside of the "influencer" umbrella, and it seems like they passed. Glad to know that your predicament had a resolution, and I look forward to a follow-up video next year about your Proto-Franken-AMS and how it's performing.
i dont think they did pass, their attitudes changed when they found out he was an influencer their is no way two ways about that. and for him to back pedal on that is wrong.
@frankarcos6355 He didn't back pedal on it. He clearly explained the difference between the Marketing group and the Customer Service group and their respective roles within the company, which he said Customer Service was doing all that they could to help him. Had Marketing not gotten involved, he may have never known he had a prototype AMS.
@@klschofield71 customer service should have known as soon as he gave them the serial number which should have been one of the first things they asked for. otherwise whats the use of serial numbers?
Thank you for making this video, bambu probably still don't know how you got that prototype unit but it makes perfect sense for why support couldn't help you fix it, most of the support people probably had no experience with prototype units and couldn't recognise that it was a prototype unit. It does sound like the support was pretty good though, even if they could have been a little less hostile to the hydra.
Creality is more of a DIY brand for hobbyists. You can hack, modify, change, whatever you want, and yes, it might not work perfectly out of the box. Also cheaper because you're doing some of the work. Bambu is trying to be a consumer brand. You plug the toaster in then toast stuff. More expensive, less work (maybe some day :)
Thank you for that open and honest analysis of BambuLabs support and the initial problem. I agree that their documentation is outstanding and they try to do the best on their customer support.
Thanks for sharing your story. It's nice to be reminded that I'm not the only human being on the Internet. The Maker community is pretty open about "...and this didn't work. But here is why..." Which is a refreshing change from [points to everything else]
Great Video Joe. Love my X1 Carbon with AMS. Support has been great whenever i had an issue which is rarely. Bought mine in Feb 2023. Never had a filament chew problem.
Great video. Interesting story. I just bought my X1-Carbon during the Black Friday sale. It's good to know the quality of Bambu Lab's Technical support. Is it email, chat or telephone? On another note, it would seem that the AMS would or should have had a serial number and build date tag. If that information was available to them at the start, it would have told them this was a prototype.
I can think of a few scenarios where a non influencer could get a hold of one of the pre-kickstarter machines. This has probably been a great lesson for their customer support.
Thanks for the update and admission as to much of the problem. I agree that Bambu and Prusa have the best customer service, in fact that is one of the reasons I donated all of my Creality printers, the lack of any service
I worked CS from Answering phones back at OSI/EA in 1995 to an EVP with a responsibility of over 600 agents worldwide--I think this is a pretty good video. Especially agent's want a problem solved first and foremost. Typically working from a playbook, with a scientific method..-- tested and verified against a lot of test cases. Its amazing how many people want to solve the issue themselves while you're online with them. Thanks for the insight. Working at a booming company, I can relate to greater customer need to the available agents. Big thanks.
I have several X1's. My Kickstarter is running like a tank. I run these printers 24/7. I had a bed issue with one of the printers that took several rounds of parts to fix and the service was very good, they stuck with the problem until it was resolved, two system boards and two beds later. I love the printers and I would not even think about a different brand. Growing pains for the company for sure, but they seem to be moving forward all the time!
That story Bambu peddles about them requiring pictures and all sorts of info to replace parts due to non-owners trying to scam them is obviously not true. To open a ticket you have to log in your account so they have all your info including your purchases and invoices. I have 4 Bambu printers and 8 AMSes.. and they've proven several times they couldn't care less about their customers.
My heatbed signal cable failed about 5 months in. Emailed them describing what I did based on the steps in the wiki for that error code. They replied back and just wanted pics of the error code on screen with the warranty claim number included in the pic and my Order ID (KS backer so didn't have one, just gave my backer number). They sent out the parts within 4 days of messaging back and forth.
I spent many years doing technical support/customer service on high tech devices. Sometimes the problem with with the device. Sometimes it was just broken and needed to be replaced. More often than not however, the problem with in the chair/keyboard interface. People who just do the steps as asked and let the tech do their jobs get much better results.
Two of my four ams units are currently down. Both of them with fairly low mileage compared to any influencer I assume. Both of them are 1 year old. The Kickstarter unit still runs without issues. One unit got a new first stage feeder which doesn’t work. I’m currently debating fixing the original feeder or going for a mainboard swap. I just needed to swap the ap mainboard of my X1C twice, so I’m trying not to need support this time if possible. While they were helpful, it was exhausting. Your clock never started ticking. You need to buy a printer (Yes that happens) anonymously to get that running. My communication with support clearly shows, that you’re dealing with another culture. That’s a big difference and needs to be taken into account.
Why does nobody talk about the fact that the motor they use is just not up to scratch in the ams. 90% of most people's issues is due to this weak baby motor. Glad you got it sorted. It's highly frustrating.
I'm not one to criticize an engineer's decision. Maybe that one motor in isolation is insufficient, but taken as part of the whole system it's more than enough. Or maybe your right. I don't know.
This is silly, they should be able to figure out which model you have regardless if you're a youtuber or a normal paying customer, replacing it also would have fixed it. Why is there so much bootlicking in this video?
With a number of the companies I am on their "move to next level immediately" customer service list. Those companies know I take the time to fully diagnose an issue and would not be calling unless the issue was beyond the most common. All companies need to implement this process! It means the greatest frustration with customer services, namely doing the same thing again and again because each call goes to a different person and the process starts again, would become a thing of the past.
I have been working with support for 3 months now on 2 X1c with AMS. Both on slot 3 and 4 fail on retracting the filament. I have done everything they asked and sometimes twice. Printed and tested everything they asked. I have been nice and patient with them but no better off today then I was 3 months ago. I have literally given up. It really annoys me how some get preferential treatment and the rest of us are left out in the cold going in circles. I really like the printer itself and couldn’t be more pleased with it, but the AMS and support, NO.
@@3dpprofessor Not sure what you are referring to as "Second Stage Feeder" since there is no reference to that part name. I just gave up with them and ordered a "First stage feeder" , a "Harden Steel Extruder" and "AMS Internal Hub Unit". I also ordered PTFE tube 3mm ID. Couldn't hurt to have spare parts anyway. First thing I replace and was always my primary suspect was the AMS Internal Hub Unit. Well that fixed it. I guess I will order another one for the other printer since support isn't going to help me.
Glad to see that Bambu support works so well in other Countries, unfortunately in South Africa the support is not that great and the importers for Bambu just can't seem to cope with the demand of support and stock. Great printer but the after sales support not so good for Bambu
Prototypes do get out. Companies can make dozens, each with tiny differences until they get it working the way they want. They keep the prototypes in case they need to check something from them at some point. Additionally, these can come off the assembly line before any shipping units do in numbers sufficient to test the line’s integrity. I used to be a manufacturer, so have experienced this. As a result, an employee may not be aware that some units aren’t meant for release and may grab one, or more, and send it out. No, usually, prototypes aren’t serialized. I recently had another odd thing occur with a company. I ordered a hydraulic punch station and some punches. The station came, but not the punches. I told them that and they sent me another station. I again told them them that and again they sent me another station. The stations cost almost $1,000, while the punch set cost about $300. So now I had three stations and only the punches that came with them, one per station. It took several more weeks to get that sorted out. One would think that that wouldn’t happen, but it does.
It makes complete sense for them to treat customers differently than RU-vidrs! Customers range from experts to novices. Arguably, RU-vidrs (at least those with established channels) are much more experienced than the average Joe. Hopefully, they are less likely to make stupid mistakes leading to a problem with the unit. Also, you have good days and bad days, pleasant customers and unreasonable ones. You do your best but can’t please everybody. But! With a RU-vidr, you’re not trying to please just one person; you’ve trying to please the thousands, tens of thousands or hundreds of thousands who watch that video.
@@Thfeyhvfdetyhbvcd I don't know which part of asking them to add a simple VAT number to my invoice made me look like a novice to them. This was due, after all, to them not allowing me to enter that data in the first place while making the order. There was absolutely no such problem with Prusa. The fact is, their customer service is as bad as it sounds.
Sorry. That was intended as a general response to the main thread, and not as a specific response to any of your comments. In fact, I later tried to look for my comment and wondered where it went. I’ll try to be more careful in the future.
It seems to me that this could have been resolved fairly quickly if they had asked for the board version number from the outset, or soon afterwards. I don't agree that you were the problem. The problem was a flaw in their issue resolution procedure and your actions actually exposed that.
The more the consumer educates themselves with other users via RU-vid and Reddit, the less strain we put on the CS system so they can focus on the unique issues in a timely fashion.
If it's not from an official source, those educations could actually be misinformation and make things worse. Gotta be careful with well meaning tutorials online.
@@3dpprofessor mainly talking about troubleshooting with users who have gone through the same issues but I agree you gotta be careful so as to not potentially void the warranty.
The actual problem with customer service is they dont read your emails thoroughly and ask repetitive questions. Also they run your text through translator software. So stuff gets lost in translation.
its not rare that these got sent out and they knew exactly how many they sent out!!!! i had one of these pre machines and so did one of my buddys.. he got his new machines but after a month and a half i got fed up!!! i still have my machine if you want it so u can fix it or see if its the same problem
I don’t believe this was your problem. I think you are backing out of your original issue which is that Bambu labs is scrambling with support and inventory. They need to get their support up to speed and now so that their customers don’t go through things like this. I just bought an X1 Carbon and the first print I am having issues with feeding filament. I just started a support case and it sounds like from you video that this might stretch out to a few months fighting with them. I honestly don’t want to do that. I will give them the benefit of the doubt and work with their support but if it gets to an unreasonable amount of time then I might return it.
as someone who had to go through multiple RMAs for my quest 2, and now quest 3... Treating customer support goes well alot more than treating them like they're a bother to you. I've had terrible customer support with samsung products despite being kind and now I've learned to just not support samsung anymore and treat it as an important lesson. Now If customer support is great and reasonable at worst then that adds to the product.
Thanks for being so honest and for an interesting video. Especially interesting since I just bought the X1C combo : I waited for almost a year to let them iron out bugs/software/customer support before buying. Will you remove or update the previous video ?
I really don't understand how this isnt Bambu's fault....there was no way for you to know that you got a prototype. If you were a normal customer and got a prototype how would you have communicated that to Bambu? I just dont get how this isnt their fault.
Their assertion is that no paying customer got the prototype units. Once they started shipping Kickstarter units, these prototypes were not sent out any more.
@@3dpprofessor Thank you for the reply. I understand now. Still wishing we could've seen how this would've played out had they not connected the serial # to your channel.
@@sliverbaerwhy it’s important for hardware manufacturers to either explicitly list out hardware revisions on the nameplates, and/or encode the information into the serial numbering system, so at least manufacturer can identify it during support engagements. Furthermore, for something which communicates as an accessory, the hw rev should be communicated to the parent device.
When the second stage feeder fails, would it fail for all 4 filaments, or could it fail for just 1 but not the others? I have only slot #1 failing to feed filament, the others are fine.
I was going to say something in his last video, but worried it would be viewed as "troll" vs. "helpful". This video had "AMS System" a hundred times... and every time I heard "Automatic Material System SYSTEM"
I have three Carbon X1s with AMS. One Kickstarter unit (with the newer feeders 😅) , one from February of this year, and one from August of this year. I see a lot of issues reported on Bambu's Community Forum. I guess I must be lucky as I have not had any serious problems with any of the machines. I don't run 24/7, but at least 50% of the time, running production parts for one of my clients and a variety of prototyping work. I could not imagine doing this much work with some of my old printers.
No issues why, but i found the story interesting. Saw part one as i was waiting to receive my P1S a few days ago. Thanks for the details. Sounds like their support is decent and getting better. I'm sure their growth has been ridiculous.
Well I bought mine back in July and the hub in the AMS is bad, I think, and I am in the process of replacing it because I havent had any luck with customer support. Hopefully this will fix the problem. I have had zero problems with the printer and it prints quite literally 24/7. I have a K1 that died 1 week after I got it, it was one of the early ones with the faulty bed level and extruder and so on and it still sits silent because of customer support. Sad really between the two machines I am in to them close to $2300!
ONE NEAT TRICK FOR DEALING WITH CUSTOMER SERVICE!!!!!! Be polite and optimistic. No, really. Customer Support people deal with unhappy people all the time. They often have perverse incentives to minimize how much time they spend helping you, and that frustrates them. Sometimes, they have a script they *have* to follow and literally have people listening in on their calls to make sure they do. It's an emotionally draining job. Hate the company all you want, but don't take it out on the person on the phone unless they've done something to personally earn it. If you start out polite and optimistic, you'll get the best they can do.
My AMS has never worked properly. My bed is more of a banana than my cheap Anet A6 of yesteryear. Bambu customer service, … well, I wouldn’t call it service. They wore me down over weeks, it was to complicated to send the thing back. The crappy bed is sufficiently compensated by a hyperactive compensation algorithm for it to print. The AMS is just collecting dust. I use the X1 carbon a lot but it’s a very mixed bag to say the least. I get your point about working with customer support and I did. But at some point, the amount of effort you need to put in just gets ridiculous for a product which clearly has serious quality issues.
We will just send you an entire new combo. Lol I wish I was an influencer. Cause if this were an average person they would probably blame them for the dead on arrival unit. Which I get it, it’s hard to trust people and they don’t wanna lose money for nothing. But boy would I like to be sent an entire new combo for my troubles. lol that sounds much better than 6 weeks of back and forth testing all to receive a new heat bed that takes hours to install but I have to install myself to fix and not receive anything for my troubles. Lol but I love your honesty and that you tried to look like a regular person to at least try and see what a normal person would go thru. But this is definitely not your fault. This is still Bambu labs fault. They said themselves they don’t know how you got this, and you shouldn’t have gotten this AMS. So clearly they were shipping out anything they could get their hands on just to get their product into the hands of people. So still definitely not your fault you had a prototype product that you should’ve never had.
As a person who has worked on a IT Service desk for several years I can hear this. People sometimes get the idea when they drop a ticket they are getting a dedicated engineer or Service Desk technician who is only answerable to that person when in reality might be answer dozen or even a 100 my peak was actually 89 tickets assigned to me at a time. I also find when people right away say "They done a restart or rebooted the device they are lying though there teeth and when caught out double down" Yes when things break or not work it's annoying trust me I logged tickets with Bambu but while slow they have provided help which is more than what Creality or Flsun have ever done
@@3dpprofessor In my experience I found FLSUN was the worst they flat out refused to help me Creality offered a free part but no extra guidanc. Flashforge offered parts to repair and even when I made the mistake they sent an extra part out at no cost. Finally Bambu labs yes were slow but they provided a fix and parts and even sent me a voucher as I brought my X1C combo a week before they dropped the price and they gave me a 135 pounds voucher for the difference
I once had an electrical issue with my car that meant the engine wouldn't turn over. Now being into electronics, I broke out the multimeter and started taking apart my dashboard, testing relays, checking grounds, testing windings on the alternator, etc. Spent hours with no success and so I put it all back together and called my RAC (automotive recovery) So the RAC bloke who rocked up, tried starting got nothing. Did a visual inspection to confirm my battery cables were attached, quickly checked my fuse boxes attached a jump box and tried. Nothing. He then shrugged and went "Time to tow it to the garage". At the time I was fuming. There I was having spent hours as a layperson tracing wiring harnesses, testing relays, pulling apart my centre console. Then this "mechanic" rocks up, plugs in a battery pack, turns the key then calls it quits!!! What the hell? If that was the case I'd have just bloody towed it to the garage myself! It was after with some perspective I realised he was basically first line. He eliminates the "turn it off and on again" issues. If instead I had simply acted like a normal customer, I'd have not wasted an entire day doing checks. I'd have called the RAC, they'd have done the basics then towed it to the garage who within 20 minutes would have found the problem (starter solenoid was U/S), but because I thought I knew more I lost an entire weekend to the fault. Same applies to IT problems. You know 1st line is absolutely going to go off of a script and have you establish basic facts about your system so... why even bother trying to diagnose, just call, do it when they are on the phone and save yourself the hassle of repeating the actions :)
The people claiming parts they are not entitled to is a process issue from Bamboo. People have taken advantage of businesses forever and there are well established customer service processes that mitigate this without impacting customer service. Also, shrink is normally calculated in when repairing manufacturing defects or providing replacement parts.
@@3dpprofessor This is only my individual viewpoint based on my work in production and not aimed to contradict your stance. I value your work and expertise. ISO 9001 is the industry standard for quality management system standard that covers product traceability, such as identification, documentation, verification, and validation. I think Bamboo Labs should have a better system for tracking their products and verifying their customers. Many other industries use unique identifiers, such as service tags or VIN numbers, to track the product life cycle, manage customer expectations, and handle warranty requests. It seems surprising that Bamboo Labs does not have a way to link the serial number of their products to the version of the equipment. If they encounter a defect or need a recall, they should be able to identify who is affected by the issue. This is not a new idea, and it is a testament to their poor product tracking that they could not tell what version of equipment you had by the serial number. Having a prototype mode or preproduction model is alarming because prototypes normally do not have the same testing as production models to ensure reliability and safety. You could have had a fire hazard in your home, and they were not even tracking where their prototypes went? Bamboo Labs is not ISO 9001 certified, compared with Anker and PRUSA which are ISO 9001 certified. Considering they are competing in the level of competition they should also have the same quality and product tracking as their direct competitors. They are a multi-million dollar company and at that level there is no excuse not to be ISO 9001 or GS1 certified.
"Lemme talk about how I don't talk to normal customer service like you have to do, for only 18 minutes of your life." "When they found out I am THE...one and only.... 3d printing professor, lemme tell you."
My Bambo lab printer is great, its like a 3D printer only much smaller! The AMS is the worst item I ever invested in! I have to babysit it and I really mean babysit it. I have to be right there the instant it tries to load or unload as likely 25% of the time the spool unload or load fails and there is then filament all over the place on unload. It doesn't matter the spool type, plastic spools fail as often as cardboard. I even did as suggested printed snap on sides. Nothing works! Its a good idea with a terrible implimentation. To date almost every time I walked away from the printer for even a few min the job failed due to a spool load/unload fail. When I use the manual feed slot everything is perfect single color! I also had a problem where the AMS took 30 min to initialize a few times only to find the AMS does not have switches at each end of the filament path and was unable to work out there was a small piece of filament rattling around in the tube. Then of course this took 2 hours to fully disassemble the entire AMS to find a short chunk of broken filament that PLA likes to do.
@@3dpprofessor No I did not see the point when I read many having similar issues which means it works as intended which is that it doesn't work. It also struggles in the top 25% and lower 25% of spools and needs a helping hand. I've had many times spools jump right out of the rollers when I had the lid raised to assist the takeup/feed. Its not a defect per say as all the rollers seem to work.
i saw your first video and i was very angry about your assume "breaks after 1 year. - after warranty is off." Thank you for your correction. Bambu support is very good. I have had serveral questions and in max. 3 days i get an answer that helps in all points. I am wondering why the support didnt ask your serial number of the AMS - so they could find out your hav a wrong AMS......
Sorry for my ignorance but don’t they have serial numbers ? I don’t understand it would be so easy to figure it out with serial number which version Ams you have without going all those hassle!
I am so sicked and tired of this kind of crappy technical support. I work as a programmer and I get the same kind of run around when phoning my ISP. It also happens with products... I get less help from them than just doing it myself, or attempting to. They just recite some dumb script taken out of an episode of the It Crowd and that's it, usually.
I had a 3d printer from another supplier. My case of obtaining technical support from the customer services requires me to send a picture of my machine bearing the serial number (S/N).
I bought a Kickstarter eBike and they do that too. Then they send a whole bunch of parts that could be the fault and ask you to call them when you get them to go a part at a time. I'm cool with it. Hard to troubleshoot an eBike when it doesn't turn on at all, but they obviously cared and wanted me to enjoy the bike. It's a good bike (my kid finally said he broke it). C3 Strom
The AMS has a number of fundamental differences from the Mosaic that make it... actually work. As opposed to the Mosaic that never really did. First of all, the Mosaic fused the ends of filaments together to attempt to make a specialty filament that transitioned between colors at specific times. the AMS removes and replaces the filament at the hot end. The Mosaic attempted to be a solution for all, the AMS only works on Bambu 3D printers. The Mosaid resulted in frequent jams because their fused filament was either slightly bulbus or frequently snapped and it got worse if you tried using unlike materials. The AMS just works. However, they both have to purge way too much, though for different reasons. The Mosaic had to purge both a regulars transition and the merged transition. The AMS cuts it off way too high above the nozzle.
A sample size of 1 doesn't tell you the average lifetime of all units. Lol. I worked in tech support for a computer company many years ago and there is a reason the warranty is set for a specific period of time. It's because all movable parts wear out over time. Nothing is going to last forever and nobody should expect it to.
so should i replace my motherboard even though my ams is fine? after a year+ of ownership it's starting to have some components go that i have en route, but its running strong! (the rubber rollers, they wear, esp with the cardboard spools).
@@3dpprofessor rollers first. Got it. If that doesn’t resolve it, feeders next. Other issue I notice is that the AMS motors get overwhelmed easily. (Not sure if it’s the main in the back or the first stage- I suspect the rollers have a lot to do with it, fingers crossed!)
@@Festivaljunkie When you say the AMS motors are overwhelmed easily, do you mean that the first stage rollers are grinding against the filament? Because that's what I saw seeing. However, the thing I realized is where was the rest of the filament? It's not that the first stage couldn't move, it's that something else was preventing the filament from moving. You almost don't want those motors too powerful or they'll grind right through when something else goes wrong.
That is the question. Because I specified that I did not want a pre-release unit, and yet they still sent me one. But that's okay. Water under the bridge.
