ICON TOOLBOX TOUR!!!! PROS AND CONS 

That intro was golden cutest thing I have seen in a while.

Thats a sick set up! The drawers not opening all the way is common on the tool truck brand boxes also. My Mac and Matco boxes I own both do that. My Mac is 15yrs old and still does it sometimes. I think it's because I don't usually open them all the way everyday. I might have to get on of those boxes one day

Very nice box indeed! I’m definitely getting one when they have all the colors with black trim

Nice box I’m thinking of going with the exact set up color and all. My krL master series snap on box does the same thing with the drawers not always opening all the way unless you pull them. Thanks for the video

Well done! Congratulations on building a great shop setup. Purchased the same Icon setup from This :)

Jabo talking about the receptacles on the box when it comes to AC current there is no such thing as positive or negative. AC is positive and negative 60 times a second (60hz). The other two prongs are for neutral (to tie back into the supply voltage and complete a circuit of potential difference) and ground (actual earth ground)

Just a thought - the end locker issues could be related to alignment between the locker and the box. Maybe different heights on the floor where the wheels sit? I could see if the joints between the box and the side lockers have excessive vertical force, it could pull the door openings out of square. Maybe shims are required here? Again - just a thought...

My Matco Jamestown cart does the same thing with the drawers and it also has the adjustable tension for closing

Got a Twin Busch Mid-Rise Scissor Lift in my shop and building my washbay/garage and will be getting the 56" ICON Box as well. Subscribed to your channel because I will be getting another scissor lift and will be checking back in with you on and about your review about it. Great video, adorable little girl Sir. Daddy's Little Helper!!

Exact same setup will be here on the 27th. Already have a 56”icon with hutch and need more room. Gonna mount the 73 to the 56 hutches on both with full lockers at both ends.

Buy once cry once, as long as your organized, prepared, and equipped that's all that matters. Otherwise your set up looks good!

Subscribed. Been watching you all morning.

The icon box is sweet man….. I have two 44 inch us general boxes an one top box and I love them…. I I love the icon line as well….. I’m just a little diy guy….. lol

Nice set up I been thinking about buying some of the icon tools do you like them

I'm a new subscriber, I started watching your videos because I just ordered the same box setup on 1/2/21. It was a impulse buy and I needed some peace of mind that I'd be happy with it. Thanks for all the info, I can't wait for it to come in. It's gonna look great in my garage.

I’m happy with my snap on boxes.

“Hi guys” “hi guys” “hi guys” “HEY GUYS” 😂😂 she got aggressive real quick

Hey nice box, but the sticking of the drawers is normal, my Snapon epic does the same thing, even with weight in the drawers ,what you have to do is pull the drawers out all the way every morning and it should be good air day,it’s the way the tracks are

The issue with the draws looks like the bearings walking, just bump em out like you are doing every now and then. if it really bugs you, take something like a plastic prybar, and get behind the bearing and push back against it. The goal would be to get the bearings as close to the center of travel as possible.

Dammit. Here I was just second guessing my preference for the green and I see this vid. Yep, it’s gotta be green. She’s a beaut!👍

Commenting on the video for the algorithm

Nice set. 👍 Thinking of getting one.

Nice review. Thank you. I'm currently waiting for a 56" box to come in...Have you tried readjusting the doors with weight in them?

Cabinet alignment is totally adjustable. Door alignment is adjustable.

Haha your supervisor needs a better raise dealing with a subordinate like you bro! Jk. Love it man thanks for the video. I still havent pulled the plug yet but am slowly getting the icons.

Very nice setup and video as well. I probably missed it somewhere but could you tell me what the total price of the toolbox was? Would like very much to purchase the same complete setup in the gray color if available. I live literally in the middle of nowhere and the nearest HFT is about 3 hours away and was hoping it would be something they would stock but I understand if it’s not. Sounds like the shipping program they have is also very good. Thanks for now.

Just purchased mine today. How big is your shop I want to build one and that looks about the size I’m thinking

The toolbox doors jamming appears to be a manufacturing issue because the doors should fit without jamming. I would ask for a replacement box and eventually the manufacturer will correct the manufacturer issues otherwise the manufacturer will continue to send out crappie boxes.

Its a gorgeous tool box. I wouldnt go slapping any stickers on it.

Great video!! Can’t wait to get my 72inch box!!

I got an icon 73, and hutch will be here soon aswell!, i have the same issue with drawrers not opening all the way unless u give em a good yank. Kinda annoying but hey lol

That sucks about the door alignment. I have the 73 with hutch and side locker in black. Been using it daily at work since October. The edges of the locker don’t align properly either but the locker door is good. The black trim looks great, they should start offering that as an option. I just finished doing an embossed wrap. It came out really cool. I posted a quick video of it.

They will break in man a lot of toolboxes are like that.

Attitude adjusted

When you ordered, did pretty much everything come assembled ?

Looks nice. What do you have to do to adjust the side locker doors for them to close better?

How's your box holding up man?? I'm about to sell my snap-on box for this one!

Man looks amazing I ordered mine exactly a week ago!!!

Can we get update on the box a year later almost? Really starting to think about getting myself one. I'm a dealership tech

My dream box! Same color and everything. Congrats on the box bro

Nice setup, do you know if side lockers will mount on SnapOn master series box

Can you do a review on the depth of the drawers so we can compare to snap-on or Marco

I’ve been looking at that same box. Sounds pretty solid. Question, where did you get the power tool storage things? Where you have the Milwaukee impacts? Tia

Looks like a nice box. 👍

Good, she didn’t kill you or kick you out!

I really enjoyed your video. I know now not to buy an Icon box... Thanks brother. was a great in-depth review...

Waiting for my exact combination but in blue

how wide is the top drawer?

Have you opened up all the drawers to see if the box tips over

I’m going to have my top bed lined like the snap on ones

Wonder if i can update my US General box with these slides

What do you do for work? Also, that’s the same box I want to get.

Can we get another update/tour on the box and how the tools are holding up over the years?

Hey jabo how do you like your icon tools wrenches and impact sockets??

Your garage floor is way out of alignment compared to that of the store. Put a LONG level across the top, then shim the rollers .... then you'll be happy.

Am I the only one that noticed that the one he stood on didn’t latch on anymore 😂💀

So do you do automotive work out of your garage as a full time job? Great video and nice box too!

How do you work on stuff that's just a pile of parts on the ground....

Whats the total cost for just your box

How much did the whole Icon box setup cost? That’s the exact setup I want.

There's no draw latch system ??. Draws just open up with nothing to keep them closed ?

I love that Green. And the middle box. The lockers on sides are nice. But that overall setup now with the lockers just take up so much space in that beautiful garage you built. Just my thoughts. It a a huge setup . Looks great. How much is just the middle part like 2800$? Or something right

Who made your intro?

How did you get the stainless top?

When are you getting lifts ?

That’s a cool tool box

Hows the head room are you looking over the top?

Do you know if the locker fits with a snap on epiq?

Have you lubricated your drawers with anything yet? My co-workers matco wouldn't open all the way til he used a lube on the drawer slides

Beautiful toolbox

Looks like the drawers bouncing back at me when closing would annoy me the most.

Nice start. As you get more tools, I think you're going to want to stand your sockets and put your Sockets in the top drawer. 1. You're wasting depth with wrenches in that drawer. 2. At least you could put your wrenches in a shallow drawer just below the second drawer.

Did you have to pay for shipping? Cause I was going to order an icon box and they told me there's an fork lift and power tailgate charge shipped to my work place..on there web site it shows free shipping

Lube up your bearings and adjust your tentioner

@jabo the mechanic still waiting on the toolbox update video

should have got a hoist first !! lol nice affordable box though

10mm nut driver missing??

nice box now if only you had tools to put in it

I want this in red or blue so bad....I'm trying to talk myself out of the cheaper USG setup from HF.

Never saw drawers that won’t open like that? Maybe dry slides? My Epiq I can’t keep drawers open they tend to roll closed on their own.

Cool set up. But, I had to stop watching after 2:40. Camera was zig zagging around Blair Witch Project-style so much I was getting dizzy and felt like I was going to puke. Please hold the camera still or put it in a stationary spot where we can see the whole cabinet and narrate that way. With better camera work I would watch the whole video.

Between the kid and the um's couldn't make it passed 2 minutes. Good looking box though

OMG your daughter is the cuuuuuutest.

Is the stainless steel top separate or is it included with the box ?

Aren't those supposed to be soft close ?

Is it possible to order deeper drawers

Should have titled Pros and (I)Cons! I shouldn't type.......

Can I have your old kobolt box

Is that green or yellow? I’m color blind. Lol

smoke detector

In my opinion, these toolboxes cost too much for what they are. If they were 1-2k cheaper it wouldn't be that bad. Especially since I can get a snapon box used, or new for roughly the same price off the truck. Couple things I see that I don't like are that the power drawer and charging drawer aren't 1 drawer just 2 separate drawers, I don't like the power strip on the front of the box, I don't like the drawer locking mechanism, and the price of it for a chinese box. I'd pay a couple grand more for a snapon masters or epiq series toolbox that are made in the us, but that's just my opinion. Nice looking box for a home box though.

Draws seem ruff or is it just me? I think they could do a lot better.

for that price if the draws do not slide out easy, I think the it is not worth the $

Chinese

AND SO FORTH

I wish they were soft close

Remove uhm from your vocabulary, beyond that good job.

It looks professional BUT for the price ( not bashing your decision ), Ya just helped me make up my mind! I was VERY SERIOUS about getting the ICON but now I'm 100% convinced to get the Tool Vault 140" ELITE. Why- For the money saved I can get more tools I've always wanted & I can fabricate the charging station to suit my location & area in the box. As for the break-in ya should have taken the time to get it right before you even laid a pencil on it. I've noticed several saying alot about the alignment issues so that alone shows me most are rushing or the fabrication is off. For the money spent I'm NOT willing to take that chance. I can get the ToolVault 140" for $3000 less & all you got was the Charging drawers over the ToolVault, BIG freakin deal! I'm 100% certain I can fabricate something similar & I also have the ability to move it anywhere I want within the box whereas your stuck with their location. Like I said I still like it but you helped me make a MAJOR decision in my purchase, for that I wanna THANK YOU!!!! Also I have some suggestion for organization; 1- VIM RAILS - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GO3ItZkLs3w.html 2- ToolBoxWidgets - toolboxwidget.com/ 3 - For those Looking For new quality boxes - www.strictlytoolboxes.com/tool-vault-tool-boxes/tool-boxes-by-size/tool-vault-72-tool-boxes.html All of this is simply "MY SUGGESTIONS" Jabo still has a nice box, I am ONLY commenting on my wants & my needs. Don't Take It Personal as it is NOT meant to be! When I get mine all set up I will make a review! "GOOD LUCK & BEST WISHES"