Idler wheel problem (solved) 

Another helpful tip: once you resurface the outer edge of the idler wheel, treat the entire idler wheel with Rawn rubber cleaner and rejuvenator. After applying it with a qtip let it soak and penetrate the idler wheel for 15 minutes. This solvent works great on hard and stiff idler wheels! I swear by this product.

I had this exact same problem. I found that a spring under the idler wheel that creates the tension required for the wheel to engage and remain against the motor pulley was a bit loose. I replaced the spring to create more tension and problem solved.

I sent an idler wheel for an (then) unknown brand turntable to Russell Industries in NY for rebuilding.They are nice people.A RU-vid man kindly put me onto them.

The platter actually does provide the pressure and guidance for the idler to contact the motor pulley. The idler itself is dried out. You can try sanding it lightly with sandpaper, or have the idler wheel redone.

thanks Robert. I actually got it working! I came across another Magnavox at a different thriftshop and $8 walked out with a second stereo! I was able to part it out and get everything working! it ended up being the tension springs on the idler wheel!

Lo que pasa,necesita limpieza lubricacion completa.

Most likely the item that moves the idler wheel needs all the old grease cleaned out. Once it is cleaned and a little 3 in1 oil al with work again

I have a Zenith console of which the original turntable was removed and replaced with a BSR. In my case the platter spins but it is noisy in that it makes a grinding noise. Once the records play the music hides the grinding. I did the cleaning of all the linkages and areas of contact but I can’t determine where the noise is happening. Anyone have any suggestions? Thanks

Omgosh I literally have this same exact issue!! I have same console too :-) I just started your video and can’t wait to see how to fix it!!! Yay!

I have a BSR table similar to yours but I have a spring on mine where you do not. In the picture of yours when you are measuring , you see a hole between the motor spindle and the stud with the E clip on it. On mine ,the spring attaches under the wheel and comes out under it to the hole. Maybe this could help. I hope this will be of some help to you.

I finally got my idler wheel to spin, however it doesn’t spin the platter. Am I missing a step putting the platter back on?

i recently bought a changer very similar to that one but a light tan color

These record players sound great once there in working order.

I see your problem, if you look down at the idler wheel and the motor, you'll see two screws and between the two screws you'll see a hole and that is for your spring to your idler wheel.

I have the exact same problem on the exact same model otherwose it works great. Where can i get the apring and other parts for this?

i was wrong the spring on mine was mounted differently which may be the reason for your problem as well

i found a longer spring that pulls the idler wheel up solved my problem

Wow! Same issue. SO, nice people have been telling me that underneath the spring I need a new one and I need to super lube and clean! I went underneath and with my arm I moved the metal that is supposed to push for different settings the round disc with rubber- if you touch while underneath you can see what needs to be lubed:-) and apparently it’s that spring that needs to be changed ( for me at least)… it looks normal to me?

The voiceofmusic.com will refurbish your idler wheel. You can also try cleaning the edge of the idler wheel with a paper towel soaked in rubbing alcohol.

i just cleaned an idler with pinch roller cleaner and the edge is soft again

did you figure out why it wouldn'y come all the way over to the motor? i bought a similar turntable recently but what i found was NOT at all what i expected

I've been having a similar problem except my motor doesn't seem to get turned on

You are definitely missing a spring to pull the wheel lever towards the motor.

I have this problem. Where can I get a new spring?

I have this same issue but im not sure if im missing a spring or if theres a tension issue by the comment's xD

Im still trying to find a place to buy parts ! Any suggestions?

Lol! Your post is 5 years ago… well disregard my words of new found wisdom- lol :-)

i see there is a spring missing

Your missing a spring that goes from the idler wheel to the small hole that's across from the idler wheel just make sure you adjust the tension in the spring not loose not to tight.

Same problem ?

To listen old punjabi, hindi , fimy , folk songs, bhajans, shabds, qawallies on gramophone, please subscribe following channel. ( Absolutely free) ਗਰਾਮੋਫੋਨ 'ਤੇ ਵੱਜਦੇ ਪੁਰਾਣੇ ਹਿੰਦੀ- ਪੰਜਾਬੀ ਫਿਲਮੀ ਗਾਣੇ, ਲੋਕ ਗੀਤ , ਧਾਰਮਿਕ ਗੀਤ , ਸ਼ਬਦ, ਕੱਵਾਲੀਆਂ ਆਦਿ ਸੁਣਨ ਲਈ ਮੇਰਾ ਯੂਟਿਊਬ ਚੈਨਲ ਸਬਸਕ੍ਰਾਈਬ ਕਰੋ ਜੀ (ਬਿਲਕੁਲ ਮੁਫ਼ਤ) । ग्रामोफोन पर पुराने हिंदी, पंजाबी , लोक गीत, धार्मिक गीत , भजन, शब्द, कव्वालियाँ आदि सुनने के लिए नीचे दिए गये चैनल को सबसक्राइब करें। ( बिल्कुल मुफ्त) ru-vid.com/show-UCWzB0ZE6lp6bfvgb1niNnbQ