Idlestopper v2 - Honda Odyssey 2018-2024 Turn OFF idle stop permanently!! 

Thanks for being a customer!

Well I’m glad to hear that you got it anyway! The panel with the idle stop button/shifter buttons can be unclipped slightly and lifted up to give more room. Like you said it is possible however to get it without unclipping but it’s a much tougher process.

The Odyssey vehicles are all 7 pin single row connectors. Make sure the connector you have unplugged is the one attached directly to the idle stop off switch assembly. The connector you need is dark gray in color and will match your module.

@@idlestopper7486 it's the right one, i'm not super sure why the plug on the back is different but i'm 100% positive that it's from the back of the button

@@idlestopper7486 i can send you a picture if you need me to

There may be another connector nearby that you are unplugging. It’s hard to see under that area but I assure you that the Odyssey connector is a dark gray single row 7 pin which is exactly the same as the connector on your idlestopper. All of the Odyssey of this generation have the same connector regardless of trim level or year. Just keep looking and I’m sure you will find the right one 😀

@@idlestopper7486 the one i disconnected is directly connected to the button, i know this because when i press under where the plug was the button moves. i don't know why mine is different but i can assure you that it is. i see on the website that you have a model with the connector i need.

Hey Mark, it does sound like you have a connection loose or unplugged possibly causing your idle stop error message, especially if you removed the idlestopper and still have the same warning. Can I suggest that you disconnect your negative battery terminal for 10 min? This would clear out any stored codes or saved messages. After that, if you still have the error message, I would double check all of the connections that you had unplugged during your installation to make sure they are all plugged back in. If you were to have a connection unplugged and turned the ignition on, this would be the cause of the error. We don’t have any compatibility issues with our modules so I’m sure your issue is something simple. Please try the battery disconnect and let me know your findings. If it’s easier for you, you can contact us via email at idlestopautooff@gmail.com and we can help with further assistance if needed. If not, we can reply here also.

@@idlestopper7486 Thanks for the fast reply! Turns out is it was a small wire harness that got disconnected when I pulled the trim below the steering wheel. Connected that back up and the error message is gone now. The video mentions around 1:25 being careful about the tube going to the sensor, but should also mention being careful about the wire harness that plugs in right above that tube.

No problem and Glad to hear that you found the issue! I can certainly try and add that tip about the connection on that panel to the current video or add it to any newer videos that we produce. Thanks for the suggestion and again I’m glad to here all is well.

Hello! To disable the ANC unit, all you need to do is locate the unit and unplug it (usually behind the glovebox area on most Honda/Acura vehicles). Unplugging the ANC unit will fully disable the ANC System and it will not cause any warning codes or lights.

@@idlestopper7486 thank you for your response but 2015 models have onboard mics, they do not have a standalone unit.

Yes repetition can be easy but one can only have so many repetitions(especially mundane ones)before time is filled up or they become annoying. Save your time for something else, don’t waste it on pressing that button. $90 is well worth the time/thought savings alone, not to mention removing the constant reminder of something that you dislike about your vehicle 🚗

Cool

It’s definitely not doing the same thing there’s a small micro controller in between there and it has a timer that counts after the engine turns on and after a say 5 or 10 seconds it sends a signal to activate the Button.