No video :(

Ignition Edge PLC to SCADA | PLC Tag Programming SCADA Tutorial CompactLogix Allen Bradley RSLogix

Подписаться 47 тыс.

Просмотров 17 тыс.

50% 1

Ignition Edge PLC to SCADA | PLC Tag Programming SCADA Tutorial CompactLogix Allen Bradley RSLogix
Visit SolisPLC.com for more Tutorials, Information & to connect with the Community
Ignition is a powerful SCADA platform that goes beyond any other offering on the current market. In the last tutorial [Found here: Installing Ignition Edge], we've installed Ignition Edge onto a Raspberry Pi. Ignition Edge is a compact version of Ignition, uses less resources & has slightly reduced capabilities. However, it's still extremely powerful and can run on something as simple as a Raspberry Pi.
Once Ignition is deployed onto a computer or Raspberry Pi, it's possible to access the gateway through the local IP address: localhost:8088/. If you're planning to access the gateway remotely, it should be available through the IP address of the machine Ignition was installed on. In our case, on a local network, we access Ignition through the IP set on my PI: 192.168.1.6:8088/.
As mentioned in the last tutorial, Ignition provides a top-notch trial service. You may use an unlimited version of Ignition for two hours. Once the trial expires, you may reset the trial in order to receive another 2 hours to try the software. In other words, you can use the trial in blocks of 2 hours indefinitely.
Full Tutorial:
solisplc.com/ignition-edge-pl...
Find us on social media:
Web: solisplc.com/
Forum: solisplc.com/forum/
LinkedIn: / solisplc
Facebook: / solisplc
Instagram: / solisplc
Twitter: / solis_plc
Other Cool Content:
Raspberry Pi Ignition Edge Installation | Industrial SCADA Inductive Automation Tutorial NOOBS IoT
• Raspberry Pi Ignition ...
PLC Networking Basics Tutorial | RSLinx Classic Lite EtherNet/IP Driver Configuration User Training
• PLC Networking Basics ...
PLC Interview Question - Array FIFO Logic Programming Example Average Rolling Mean RSLogix 5000
• PLC Interview Question...
PLC Programming Tutorial | Allen Bradley Training in RSLogix 5000 Ladder Logic Basics for Beginners
• PLC Programming Tutori...
Industrial Relay Control System | Wiring a 24 Vold DC Relay Circuit
• Industrial Relay Contr...
PointIO Allen Bradley Hardware & Software Tutorial | 1734-AENT Point IO EtherNet RSLogix 5000 Logic
• PointIO Allen Bradley ...

Опубликовано:

22 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@oliesting4921 4 года назад

So cool ! cant wait for more videos and try this out :) Thanks for the videos!

@aadilferoze3621 4 года назад

I have been waiting for this!! Thanks Vlad!

@francprofjr5336 5 месяцев назад

Amazing Vlad, thanks for sharing and give many the option to open doors. Awesome

@CosminRusu154 3 года назад

Thank you!!

@lastnameavailableok 3 года назад

very good

@Jadaspende 4 года назад

Hi Vlad! I hope you are doing well! I really like your toutorials. Can you please explain me how to do the same with a ML1500 using a 1761-Net-ENI? I understand Ignition doesn't fully support ML1500 and TAG Browser doesn't works, but I cannot figure how to add tags manually that actually works. Thank you!

@sebastianfreire1387 4 года назад

Awesome!! Please can you explain how to publish PLC data using MQTT on Ignition Edge? It is necesary another gateway to configure MQTT?

@therealcoolc 2 года назад

Can you change the data type in Ignition Edge to BOOLEAN so the values don't display as an integer value? You might also be able to make a Tag Reference tag or custom data type to have the bits come through properly. I'd like to tinker around with this. Thanks for the videos!

@antoniohernandez8575 4 года назад

Hi Vlad I would like to know the way to work with RPi4 and designer launcher with debian 32 bits OS.

@ansonkiek6471 Год назад

hi I have compact logix studio 5000 plc , customer is using ignition. I check your video ignition can directly read the plc as long the setup opc built in for ignition. So my side not need do any software or programming ? Just connect and browse the plc tag through my plc Boolean or any tag right ?

@alejandrohernandex Год назад

Question about Alarming/ Pipeline on ignition edge? Does any body know how to do it ?

@edwardnelson446 Год назад

how do i read a tag from a slc-500 B3:4/2?

@dandevos3816 2 года назад

Does this Ignition Edge only allow for reading tags and no writing or can you write to them as well?

@seanoreilly6551 Год назад

There is a setting in Ignition "Bi directional", when this it true you can write to the PLC, the default it read only.

@furuderika8093 3 года назад

So it broke down the arrays into dint? Is there an opc server that would make Bool[256] into ignition that wont change its data type structure?

@therealcoolc 2 года назад

You might be able to create the tags in Ignition through the multi instance wizard or do it manually as an OPC tag and point directly to the corresponding bit. It might be possible to create a script or expression that would convert the value of the dint and write to boolean tags.

@gaylerunner8883 2 года назад

I extracted the designer laucher but it will not run.. is there something I need to do?

@SolisPLC 2 года назад

Are you getting an error? Can you try on a different machine? I haven't had any issues with the designer; not sure how to help.

@josesolanorodriguez5511 2 года назад

Maybe I sound like a dumb, but my question is: I can send a whatsapp for every alarma active, whit this system or any other?

@seanoreilly6551 Год назад

Looks like the options are Email, SMS (with a separate module and a SIM card) or a voice message with extra software VOIP) Ignition can be viewed on a phone for alarm purposes.