IK Foamer VS. Marolex Axel Foamer pump sprayer! 

Nice review Chelsea. Thanks for the hard work putting these videos together for us

Great video! Been really looking into a foam pump sprayer. Thanks for the info.

Hello Chelsea. Thanks for the nice comparison. Remember that Marolex sprayers have a button lock. You don't have to keep it all the time. just press it and move the lock forward. :)

I already have a compressor so I invested into the IK foam pro 12... I just use the Schrader valve. I can foa a whole car with power clean with one fill. Its soooooo worth it!

Great review , I've been looking at the ik foamer for applying Apc's etc . I've got a Mesto foamer which has given a few years sterling service .

Thanks for sharing. BTW as seen in other videos, IK Foamer also comes with 3 different spray patttern Nozzles i.e. Greay = Medium, Orange = Wet foram and Green = Dry Foam !!

Amazing video, exactly what I was looking for

Nice comments on both brands. Can tell you are a mom, can do two things at the same time.

Great video and interesting. I bought the new IK Foamer Pro 2 this morning. Look forward to trying if for the first time. I like the comparison with Marolex which I think is a good sprayer too 😀

Good to see a girl in the detail game. Keep up the good work!

I like ur video and making quality of video is really genuine best of luck thanks for making direct comperisiin video

Thanks so much for doing this comparison! What dilution ratio did you use on your test? Did you use what's suggested on the bottle? I'm using Chemical Guys Snow Foam and I'm trying to figure out the right dilution to get a good foam with the Marolex.

You had me at road boogers. Thumbs up.

Now I've got my marolex set up with the right foamer nozzle it's great... gives a good coverage but you do need to give it a lot of pumps....

thank you for this comparison video

Thank you for sharing this video ☺️

Thank you so much for your help

A massive omission is the amount of pressure the Marolex can retain over the IK means you have a longer work time after pumping a bit longer, so you don’t have a lot of interrupted application.

Great video as always

Great comparison video, I have both foamers and get about the same results you did. The only thing and I may have missed you saying, is that the IK foamer has interchangeable tips as well. They have the one they ship with and two others to change foam density.

Nice review ,Thank you

Thanks for the comparison. Just FYI-- The iK Foam Pro 2 has 3 interchangeable tips as well

Awesome information ty

Hello, in your opinion, what is the best sprayer of all that you have tried?thanks

I have an ik but would like a marolex foamer as well. Luxury microfiber has been out of stock for weeks.

I’m looking to buy a foaming pump sprayer as I don’t want to have to hook up my electric power washer or even a model that you need a garden hose for. I know that they won’t come close to matching the foam quality of a power washer model. I’m leaning towards the IK as I think I could buy it locally and return it easier if I don’t like it. Question. Can I use ordinary car wash soaps with it? Videos talk about products containing surfactants are needed. I’m hoping the car wash products I have would foam up properly.

The IK does have different tips that connect inside. To determine foam watery or dryer.

great!! thanks a lot

hi! how many pumps do you need to do before it runs out for a sedan carwash?

I picked up the newer style Kwazar sprayer and foamer off of autopia on sale and they seem to work well for me. I use them for foaming wheels and tires. I dilute Rage and use to rinse off the side of our cars after driving thru PA's snow grime before pulling into our garage. Wife thinks I am nuts :) Have IK's also but wanted to try something different

As a "yinzer" you're awesome. 👍

Very nice comparison....and btw, we all like you !..😃

I've always used ik sprayers and honestly I've been disappointed. When you bleed the pressure after use it foams up and comes out if the handle since new and have 4 of them. It sucks getting chemicals all over the place every time I use it, plus I've had 2 of them get a sticky trigger even after a heavy cleaning and disassembly and reassembly. I'll be buying a different sprayer as they fail.

Good girl good video keep going thanks for your information review. ;)

My mom found the "pump it up" part hilarious

Thank you..for this...how are doing June 2022

pH 14... Wow! Is it good for a Marolex Axel? I wash with pH 10-12 foams and looking now for a some Foamer like this Axel. If it's works i'll buy it. )))

I love your content.

Hello, thank you for the video. I just purchased the same Marolex Foamer. I can't get mine to foam the way yours does though. Question, do all the foaming tips have what looks like a white piece of cotton in the back of the tips? Is that what creates the foaming action? What is the best shampoo for these type of sprayers? Thank you.

With the pump foamer, you're going to get a stronger solution compared to a foam cannon, in which it's being diluted more with water. Excellent comparison.

What’s the warranty on the marolex sprayers?

Very useful comparison! Thanks a lot!

I am old and lazy. I put a tire valve in my sprayers and a small pressure Gauge. Use the compressor. LOL Well that’s what I did with my lawn sprayer and my brake bleeder. LOL

Sooo.. The iK has been updated. It comes with multiple tips stored in the handle, a sturdier bottom that won’t tip over, and bigger capacity

Which product can be used

Hi, What do you suggest to remove tree sap from the paint? Especially sitting on the paint for a while. Thanks

U remind me Lara Croft with your 2 bottles ! 😄

No need modify the pump?

#2 -Its either that or it moves inside for plants

Hey, I'm breaking my head.. I want to foam a small car and not sure if the axel 2000 will be enough or go with 3000??

I have the Marolex foamer and sprayer. I love the sprayer, but the foamer just doesn't perform to my liking. After a few seconds, it just shoots a stream.

Chelsea, do you clean the sprayers out, run water through the them in between uses.. I find if I leave a brake buster type product in it gets all clogged up.. maybe just me

Chelsea, by chance (didn’t see) have you done one to compare the larger capacities iK20, against the Marolex Axel 7000? Wondering if hand pumping is worth it or if the iK20 or iKe20 (battery) with Schrader valve (and small electric tire pump) might be the way to go. Like many, I’d really like the thicker stay-put foam that the hose-pressure foamers just won’t do, and cannot do the seemingly necessary expensive/space-hog pressure-washer. Either of these, then, could be an affordable/tidy and viable option?

You're not comparing apples to apples if you don't use the same type internal spray tips provided by both sprayers. The external tip is not what dictates the foam density. The internal changable tips are what do this. Also the foam density will determine the how much pressure and liquid are used in a given time frame.

Good video luv, job well done 👏👏👏

I like you! :) Nice comparison. pH of 14 means it's most likely very caustic, watch out with that stuff, use gloves at least! And some goggles. Maybe even a respirator... I always recommend Optimum Power Clean. Way (WAY) more expensive, but it's só powerful yet só gentle and safer/healthier to work with. Of course you still want to take appropiate pre-cautions with that as well. Just some friendly 'advice' from this 'keyboard warrior', hope it helps.

Will the marolex hold pressure until you release it or it will need to be pump again after a few spray?

would you suggest a sprayer and a foamer? not sure which one to get. they have acid version of foamer and sprayer and the same for alkaline, thanks

Sumeet, Scott and luxury microfiber company screwed me by not refunding my Shield coating that crystallized in the bottle. I will NEVER purchase another product from them!

Had been watching IK sprayers demonstrated on another channel. The host would pump his sprayer until pressure started to relieve. Without thinking, I tried this with my Marolex Industry 2000. The seam on the bottom of the bottle failed. Two completely different designs. Whoops.

Great for when your pressure washer is too weak to foam a car!

Thanks for the comparison but which one put out better quality foam?

Who's the guy you mentioned @Luxury Microfiber...what happened to Scott🤔

Just so you know, electric pressure washers are double insulated and a little rain isn't going to hurt it one bit.

I think the IK sprayed better and wasn’t as noisy. I like the IK I may get that one! Also IK more compact more user-friendly not as bulky.

you do get that theres a mechanism on the axel, so you dont have to keep it pressed down, it allows you to lock in it place.

Which one do you like better my ik foamer sometimes doesn’t foam today it didn’t work at all, will the marolex one work well with brake buster wheel cleaner

Hi Chelsea, is there any situation where you may want a sprayer instead of a foamer?

Little tip. Get the 110 degree tip for the Marolex. Deff. Worth the little money it Costs🎉

How long do you leave the foam on before you wash it off?

Question for ya. After all the pressure is gone with the first 40 pumps on the ik foamer do I need to re pump 40 times

Sorry if you already mentioned it but is there a difference between the Marolex Axle and the Marolex Industry? Where I am the Industry is much cheaper.

Hey I can't find that product rage anywhere. Can you share a link? I love what it was doing you can see it pulling nasty grime off

What are you using for a camera?

Miss Chelsea which do you recommend? Thanks

Спасибо, мать!

Nice video...

Nice video looking for pump sprayer but to cover a car I assume I have to pump 200 plus times

Does the Axle 2000 hold enough solution to get around the entire car with a presoak?

Im gonna have to go watch a Technotronic video now! 😅

Can you use the foamer with ONR or McKees n914?

I think these pump sprayers are pointless for a car side - ok for a wheel - the guy who put a tyre valve on seems to have the right idea

Will luxury microfiber match the amazon price are they like other detailing sites

I wish my woman would wash her car

What did you spray on the panels ?

Ik is garbage compared to Marolex.. even the Pro2 (which is better than the one in vid) Marolex is Easier to take apart and clean changing tips at the sprayer nozzle is what i like the best.

The Marolex has an auto lock so you don’t have to hold it down lol that would alleviate your fatigue

You really need to add a shrader valve to them. And no more pumping!

I have the Adam's foamer which i thought was similar to the ik... mine does not work like that ...mine is crap

Chelsea what ratio of rage did you use?

Ik 9 foamer try that out

Which is the preferred foamer?

ik has interchangeable tips!

What's your favorite pump sprayer, rather than foamer? Pretend you are using a rinse less wash product.

Isbthe marolex a sprayer and also a foamer?

In your opinion which one is the most cleaning and strong quality ??

Bottles should be half full. Holds more air

Why aren't you using a pressure washer? You do know they're waterproof right?

cuál es mejor??

Ik foamer pro has interchangeable tips