IKEA BESTÅ Storage combination white Assembly 

I love how direct this video was. Love the extra shots riding the back panel in and the angles from instead the cabinet as well.

Assembling now in 2024! Thank you 👍🏾

I just bought 2 of this .I am very excited!I am just a girl, hopefully i will manage to build it myself.

Normally we have no issues with Ikea's instructions, however I was so confused by the instructions for this Besta storage combination! 😅 Your video was a real lifesaver, thank you!!

I have three of these to set up this weekend with spotlights for BluRay and figure storage in the home cinema, thanks for a great video.

Thank you very much. With such videos, you will receive blessings forever...

Useful video. Thanks for posting.

What an adorable accen!

Thank you so much man. I was very puzzled about the shelves/dividers as they gave me like 3 different types of things to put the planks on. Now I know what to do :)

So helpful! Thank you!

Thank you! This helped me alot :)

Thank you

Easy steps guide video. Thank you

thank you, very helpful video, regards from Poland

Very good video, just what I needed with this monstrosity of an instruction Ikea gave to us.

You sir are a good man!

Thanks a lot for your help to others 😎

Interesting. We bought the box versions (no long wardrobe ones like yours) so we have small metal brackets to secure the boxes together on the back. Just to let others know the difference. Yes, you still need to screw the box version to the wall same as in this wardrobe version 🛠️

amazing video- I was just about to send the f*****g shelf back where it came from, but then I found this magical piece of video footage

Hi good size combination ,well done,can it be used as a wardrobe or bedroom storage as well? Thanks

Thanks for sharing! 😍👍🏻🙏🏻

,,, this was a great help for me thank you very much :-)

Hi what size screw did you use to connect the two cabinets/shelves together please?

Thank you kind ser ❤

Thanks

Awesome video! Is it possible to switch the cabinet doors to open the opposite direction? Example: the cabinet on the left, have the doors swing out to open to the right? I’m buying from someone and they are selling the one on the left but I need the doors to open to the right. Thank you

is it possible to assemble the Besta 192cm standing up? Also, I love all of your videos - so very helpful!

Thank you so much for this very helpful video. There is a plug point behind the Besta we plan to set up, which won't allow us to push the unit right up against the wall and secure it. Would you have any suggestions ? Can we eave it unsecured, as it looks heavy enough to not topple over...is that a bad idea ? Thanks for any advice you might have.

If I were to buy IKEA plastic storage boxes,could you please advise what size boxes I would need to buy. Also can I not put the shelves in so I can stack the plastic boxes?

Like 5 Great video 🙂🙂🙂🙂🙂

Very helpful video - thank you. What size screws did you use when fixing it at the top against the wall?

Thank you for posting! I am having trouble getting my push hinges to work. The cabinet doors do not push up against them hard enough to push the spring all the way back. Any ideas on what I can do to fix that? Thank you!

Thank goodness for your video I was about to throw a lot of money down the drain!

thank u so much

Could you please build a Hallan cabinet (double if possible) as I’m having issues with the doors and your videos are always my go-to. Thank you :)

Hi, I really love your videos and those become my reference to assemble ikea furniture. For this besta storage, how do you install the bottom door without drag on the floor?

Thank you! After lots of practice, I’ve gotten pretty good with IKEA instructions, but their pics for the door installation were awful. With your video I got it done, though!

Awesome video! Can you please share what screws are you using to secure the dividing panels (7:34)? I’m not finding them. Many thanks!!

How thick are the pieces that carry the doors?

thanks

HI...I just bought and setup the Besta Tall cabinet at 75inches and it wobbles a lot. It might wobble left to right at .5" to 1". I have followed the directions perfectly...however I have not screwed it into the wall as it is wobbling so much. I have read that the Besta unit has changed from older versions. I see they also have a 50" vertical. Do you think my frame is defective? Or should it wobble so much until it is screwed into the wall? Also, I have floor molding and was planning to wall mount a hanging Besta above this unit. I have about 1 1/2 inch of molding on the floor, do you think i have to take out the molding to make the two cabinets sit flush on top of each other considering the top unit will use the suspension rail? Thanks!

At 7:32 you secured the dividing panels with screws. The screws for that and instructions for that step are not included in ikea directions. Did you just add that step on your own and use your own screws? Thanks

This wood colour looks way better than the 'white-glazed-oak' they sell today.... This one is unfortunately not available anymore....

Which hole # do you install each door on and then the main shelves by the doors and the push parts? Thanks!

Is this unit completely finished all around that I could put each section up separate instead of together?

How long did it take from start to finish?

Why do I have so many problems to put the back panel? It’s a nightmare! Any advice?

I absolutely cannot insert the backing board without it falling out of the grooves. You slid it in so effortlessly! Any tips?

Nice work..Can these Besta cabinets be hung on the wall, not just sitting on the floor?

Hello, my Besta is shifting side to side by about 1/2 inch. It's not very stable. I tighten the cam locks and they seem to hold the base/top very tight but the frame is still shifting. Does the unit design to stand alone or do you have to screw to units together else it will shift? I am thinking about getting the metal cam locks and see if it will help or not. Do you have any suggestion? Also I don't put the cam locks in the hole first like you do before pushing the base/top in, does that make any difference? Thanks for your help in advance

how would characterize the quality level of Besta storage?

If you have only 1 small frame 23"H x 23"W x 8"H does it have to be secured to the wall? Every time I open the door the unit tips forward.

If I do not screw the 2 inner top corners to the wall, would the whole thing topple down towards me when all doors are opened? Door seems heavy. Not sure if there is a difference of (2 frames with 6 doors) vs (1 frame with 3 doors). Thanks. Very useful video.

Hello! Sorry bothering again. I just trying to install one of these but even secured, mine bends a bit and cannot adjust top door. If you push one of them by hand bends? Mine yes, I'm trying to figure how to fix this. Thanks in advance :)

I hear u. But there should in at least an average time

Any tips for adjusting the cabinet doors? I can't get them to line up correctly. They're not straight, or touching each other. Thanks

how do i anchor this to the wall if the wall has a 1/2 inch bass board

The holes in the sides to put the shelves in don’t match what can I do

There is two supporting shelves?

Great! Now, show the part where the doors constantly need adjusting because the weight of them doesn't play well with gravity, and how you need to secure the cabinets in studs in at least 6 or more places because if you have more than one door open, that cardboard backing tears and down it comes (hopefully not on a kid). You need to modify the bottom if it is not on carpet and add a few 1x4s to the back that screw into the actual wood frame of it and then to the studs.

We finished assembling this wardrobe, so far so good, just as an advise, put a towel in the bottom while screening the shelves, the tool fall down constantly, the towel will prevent to damage the bottom part. It seems strange the space in the back of each shelve, this is not in the instructions, thanks to this video we did it the right way, the doors do not close as nice as in the video, no wonder there is a plastic protector between the doors, I'll keep playing adjusting it. Good luck everyone assembling it.

I came here bacause I did not know if Best is sh... quality, or I am just doing something wrong. Well, I was doing it right :)

Just built 1 of these units. Absolute piece of crap, it literally sways from side to side even with shelves in. Large drawer runner wont fit drawer and drawers bang into doors and drawers to the bottom and top. Yet all assembled right. 😭😭😭 i have no idea how to fix. I can see daylight through the top panel and sides, its that badly made

too fast a video... hard to catch for a beginner

So you said absolutely nothing about assembly time