I am guessing that they show the hot and cool sides of the cooler. Hot would be at the top of the tank and the cool would be the output of the radiator back into the bottom of the tank.
They replied to me and average price before shipping is about $1000 per slot per miner. This was for the full set everything included. After shipping and customs probably closer to $1500 per machine. It's very expensive
In the US you would need upgraded electrical panel to pull that much safely. Even though most homes are starting to have a 200 amp breaker, you have to turn gear off to do anything due to power constraints. You have to power the cooling system too.
The calculation for S19 pro - 3500W ÷ 230V in the uk = size breaker which is 15Amps, so you would use a 20amp breaker this will vary depending if single phase or 3phase or where you live in the world. Use 6mm cooker cable close to DB and run each unit on a 30 amp to protect asic ideally run a seperate DB split the tails seperate the power from your house supply.
Yes. Im in Canada and working with an electrician right now. I have an older house built in the 50s with a 100amp service to the panel in my house. We're upgrading that to a 200 amp service with a new panel that has enough room for the 8 circuits.
Hello, I received my order. As I mentioned before I do my order. You saler confirmed that system is run for goldshell CK5 miners. But in your other video in the comment you said that we have to remove thermal paste... All the components of goldshell miner are using thermal paste. So are you sure at 100% this is work with goldshell CK5 miner? I just need to clean and replace fan with fans emulator? I don't want to break my miner. If I have to remove the thermal paste this system is not good for my setup. As your saler told me it is a plug and play system so please I hope I don't need to remove thermal paste of all heatsink... I am not able to do it and so this enclosure is not working for my setup. Can you add the liste of all miner that is working with it without anymore preparation than cleaning and fan remove please. I don't want to run it but not before you garenty that is 100% working without any complicated operation (thermal paste remove from all components...). Thank you.