Many people ask about the preparation of the ASIC miner for immersion cooling. And many believe this is a complicated process. The truth is that not complicated at all. Even used, dusted air-cooled miners require just a little bit of cleaning.
We show 5 simple steps for proper preparation of ASIC miner:
1) remove the fans, covers, panels from ASIC miner and PSU if needed
2) remove dust with compressed air.
3) clean each of the hash boards and housing with isopropyl alcohol. Use soft, long-hair brush for the hash boards. Housing can be cleaned also using an ultrasonic cleaner.
4) repeat the process until miner components pass the white glove test.
5) assemble everything and use fan spoofers or immersion firmware
Done! You are ready for the immersion cooling! New miners require just retrofitting as described in 1) and some compressed air.
If you have the option you can immerse the miners finally in a larger container full of IPA and shake it to remove all final residues. Please remember about health and safety when working with IPA. You need good ventilation, we advise respiratory protection when working with evaporating alcohol and make sure there is no open fire around.
Follow us and You will find more information at cryptocooling.eu/ FAQ section or at dcx.eu/
20 авг 2020