Тёмный

Impressive: Lian Li Lancool 216 Case Review, Thermals, Cable Management, & Noise 

Gamers Nexus
Подписаться 2,2 млн
Просмотров 733 тыс.
50% 1

Sponsor: Get 10% off Squarespace purchases (geni.us/BqEpf)
The Lian Li Lancool 216 is a highly competitive case at $100, launching today, and replaces the Lancool 215 while offering cheaper access to Lancool III features. Our review of the 216 looks at thermals, noise, noise-normalized thermals, and build quality features (like cable management, the unique rear fan, the custom-molded front fans, and the accessible top panel). The benchmarks have the 216 instantly as a competitive case worth learning about. We also show before-and-after shots for “water cooling mode” and “air cooling mode.”
Watch our Lancool III Review: • Lian Li Lancool III Ca...
RELATED PRODUCTS [Affiliate Links]
Lian Li Lancool 216 on Amazon: geni.us/MUxi
Lian Li Lancool 215 on Amazon: geni.us/BJIsU
Lian Li Lancool III on Amazon: geni.us/IYCirP
Fractal Torrent Compact on Amazon: geni.us/O4yWhW5
Corsair 4000D on Amazon: geni.us/aMBA1r
The best way to support our work is through our store: store.gamersnexus.net/
Like our content? Please consider becoming our Patron to support us: / gamersnexus
TIMESTAMPS
00:00 - Lian Li Lancool 216 Case Review
01:40 - Unique Fan Features & 216 vs. 215 vs. III
07:52 - Converting to Air Cooling Mode vs. Water
12:13 - Fit & Finish Issues, Cable Management
14:39 - Warnings on Liquid Coolers & Radiators
17:21 - Thermal Benchmark Setup
17:44 - CPU Thermal Benchmarks on Lancool 216 vs. 215
18:44 - Comparison CPU Thermals vs. Alternatives
19:19 - GPU Thermal Benchmarks on Lancool 216
20:54 - Comparison GPU Thermals vs. Competition
21:24 - 3DMark "Gaming" Thermal Tests
22:02 - Blender CPU & GPU Low Heat Load Tests
22:42 - Standardized Fan Testing
24:17 - Noise Levels
24:53 - Noise Normalized Thermals
25:32 - Conclusion
** Please like, comment, and subscribe for more! **
Links to Amazon and Newegg are typically monetized on our channel (affiliate links) and may return a commission of sales to us from the retailer. This is unrelated to the product manufacturer. Any advertisements or sponsorships are disclosed within the video ("this video is brought to you by") and above the fold in the description. We do not ever produce paid content or "sponsored content" (meaning that the content is our idea and is not funded externally aside from whatever ad placement is in the beginning) and we do not ever charge manufacturers for coverage.
Follow us in these locations for more gaming and hardware updates:
t: / gamersnexus
f: / gamersnexus
w: www.gamersnexus.net/
Host, Writing, Test Lead: Steve Burke
Testing, Writing: Patrick Lathan
Camera, Video Editing Lead: Andrew Coleman
Video Editing: Mike Gaglione

Игры

Опубликовано:

 

7 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1,1 тыс.   
@GamersNexus
@GamersNexus Год назад
We like this style of edit for case reviews! It's a lot more work to do it this way than the massive voiced over sections, but also more rewarding and fun since cases are so mechanical. We'll keep trying to do this style whenever time allows!
@maiwson
@maiwson Год назад
The missing IO shield always triggers me way too much ..
@korezako3930
@korezako3930 Год назад
love the edit. something fresh from GN is always welcomed
@forcinghandlesisdumb
@forcinghandlesisdumb Год назад
Totally agree that this style is superior. Time may not always allow, but I do appreciate it.
@thatsgottahurt
@thatsgottahurt Год назад
For sure, GNs video quality and editing skills have skyrocketed over the last year. Amazing work everyone. Also will GN ever do Case Review with a CPU CLC\AIO? Almost all of my friends who have PCs built in the last few years have a water cooled CPU and an air cooled GPU? The current method gives very good results that should translate to what to expect with a CLC as far as airflow, but still it would be interesting to see a one-off video showing the differences in your current air numbers vs the average numbers of a few cases with a CLC.
@JuanDi_SDK
@JuanDi_SDK Год назад
At the very least Fractal, Lian Li and maybe Hyte deserve this really cool if more time consuming style
@KenS1267
@KenS1267 Год назад
Lian Li seems to be the only case manufacturer doing actual engineering in the space right now. Not gimmicks and not just slapping foam everywhere to claim "SILENT!" but actually trying to make a case that is easy to build in and work with after the PC is built and that produces good thermals.
@watataenjoyer
@watataenjoyer Год назад
They take advice from gn
@chrys9256
@chrys9256 Год назад
I don't really understand the logic of a "silent" case. If you want less noise just lower the fan speed. Closed off cases with foam necessitate higher fan speeds to avoid overheating which negates the noise benefit. Am I missing something?
@Belhazar
@Belhazar Год назад
Totally agree, lian li and Bequiet are for me the best case manufacturer in engineering aspects.
@thunwa55
@thunwa55 Год назад
Be quiet is also very good, a bit more pricey.
@ledoynier3694
@ledoynier3694 Год назад
@@chrys9256 yes. coil whine for example, high pitch noises, fan motor noises some fans produce at low speed, and just the white noise created by airflow is very easily blocked by foam. So it always helps a bit actually, but as you said, on top of that you have to make a sensible fan curve too. No point in getting foam padded panels and leave the fans blasting away.
@moldyshishkabob
@moldyshishkabob Год назад
Wow... Looks like Fractal and Lian Li are starting to become the true titans of the case industry. God bless competition! This is definitely an exciting $100 buy.
@MiGujack3
@MiGujack3 Год назад
Kinda reminds me of the old CoolerMaster's TRUE HAF cases.
@Gatorade69
@Gatorade69 Год назад
Whatever happened to Antec ? Liam Li have always had good cases.
@GamersNexus
@GamersNexus Год назад
Edit - replied to the wrong one. But agreed on much of this!
@jakehead20
@jakehead20 Год назад
@@GamersNexus I want to see what a Torrent v2 would possibly look like. Who knew that a case focusing on airflow and proper engineering would turn out to be a good product?
@moldyshishkabob
@moldyshishkabob Год назад
@@Gatorade69 You're definitely right. Maybe it's my being newer to the PC realm, but I feel recently that they went from "good" to "great". I can say that the Phanteks P500A is "good", but I would say that the Fractal Torrent is "great". But Lian Li and Fractal also putting out more mid-range hits like this and the Fractal Pop Air? "Titans of the case industry".
@0xBULLgogi
@0xBULLgogi Год назад
just bought and installed in the 216. Its hands down my favorite case of all time, and it was also the best and easiest to build in. Form, function, performance, style. Love it. Would recommend 10/10.
@tryfergoodra552
@tryfergoodra552 8 месяцев назад
Yo could you tell me ur build bud and hows the noise , looking up for this case
@Darkswordz
@Darkswordz 3 месяца назад
How well has it worked to keep dust out? That is my only concern with this case.
@obiwankenobi661
@obiwankenobi661 Год назад
love the laidback, no-nonsense, straightforward reviews. so good.
@ApexLodestar
@ApexLodestar Год назад
Nice to see the Lian Li Lancool II Mesh is still chart topping in some tests. Best PC case I've ever owned. 🖤
@swizzler8053
@swizzler8053 Год назад
It's a freaking awesome case.
@tomunterwegs1206
@tomunterwegs1206 Год назад
I built two pcs with it. Mine and that of a friend. My only problem with it is that I could put the PSU only fans down in instead of pulling the air from the case out.
@spicyghost6655
@spicyghost6655 Год назад
at first i was considering the nzxt h510 because of the aesthetics but eventually i went with lancool 2 mesh because of value. couldnt be more happy with it
@RicochetForce
@RicochetForce Год назад
Oh yeah, due to the fantastic design of that case it's going to be chilling in the top 5-10 results for years. And notice, that's at STOCK. Other channels have tested placing fans on the vented PSU shroud and it improves things further.
@River_Miles
@River_Miles Год назад
I swapped from Lancool 2 Mesh to 011 Evo and kind of miss the ease of the lancool 2's hinged doors. The Evo looks nice but needs way more fans to keep GPU temps down. The Lancool 2 mesh is the best out of the box experience balanced for cooling both CPU and GPU to the max while still being quiet.
@hero2zero2000
@hero2zero2000 Год назад
Recently purchased the 215 based on GN reviews and was not disappointed. Considering I came from the Thermaltake VG200 which has atrocious ventilation, I am very, very pleased. The 215 is still a great case
@joeyverliesharen
@joeyverliesharen Год назад
There was a recent post in the overclocking subreddit where they jerryrigged an 80/92mm fan to the back of the pcie slots, just like this case. Several user reported multiple degrees lower gpu temps. So this is a really awesome development to see. I think the difference with this case is so small, because the airflow from the front panel is already great. Perhaps this add-on is better suited for cases with restrictive front panels.
@Lishtenbird
@Lishtenbird Год назад
I'm still waiting for a creative comeback of side panel intakes.
@cc0767
@cc0767 Год назад
@@Lishtenbird well we did get these angled up bottom fans. Thats the closest you will get while keeping a glass side panel
@AliShaikh_744
@AliShaikh_744 Год назад
Could you post a link or tell us how to get to it? Thanks.
@joeyverliesharen
@joeyverliesharen Год назад
@@AliShaikh_744 go to the overclocking subreddit. Sort by "top of past month" and it'll be near the top.
@pirojfmifhghek566
@pirojfmifhghek566 Год назад
@@Lishtenbird Like Kim Kardashian?
@jackieyip359
@jackieyip359 Год назад
I copped one and it was by far one of the best cases I built with. The included fans are really the star of this and the removable top makes it easier to top-mount a radiator and to plug cables.
@RicochetForce
@RicochetForce Год назад
Damn, the Lancool 216 is going to be popular as HELL. The 215 was already a strong contender but this is a step up from that.
@brother_dana
@brother_dana Год назад
6x6x6 is definitely popular as Hell
@Edge_of_Sanity
@Edge_of_Sanity Год назад
It's that $100 price that's the most attractive. Any other brand, this would be $150 at least.
@stevenseverin5882
@stevenseverin5882 Год назад
What case is overall better (air flow, cable management,etc) between Lancool 216 or Fractal Torrent? If both are almost compairable in air flow?
@gregvandy8902
@gregvandy8902 Год назад
Unfortunately the 216s popularity will likely result in a higher price tag before long
@gregvandy8902
@gregvandy8902 Год назад
@@stevenseverin5882 The Fractal Torrent is massive. E-ATX capable. Cable management is easy. The 216 has great cable management too but it's about the size of the Torrent compact. The torrent cases are overpriced IMO and have a couple downsides. If you plan to use liquid to cool the CPU, the only place to mount the radiator is in front. Must remove the huge fans to do that. You can put them in the bottom which should definitely have some fans installed there so it works. Build quality and the cases looks in person were a negative for me. It feels cheap in comparison to cases that cost significantly less. Right now the Torrent and compact are $216 and $186. That's too much as it's gets destroyed by cheaper cases. Also those cheaper cases don't look or feel cheaper. The 216 is half the price so that choice is simple. At around $50 less the Lancool 2 and 3 are far better cases as well. All of these should have fans added to the bottoms below the GPU as it benefits the GPU tremendously. One of the absolute best cooling cases I've seen lately is the Antec df600 flux and it comes with good fans in all the right spots. Since it already has fans in the bottom Below the GPU, I'm confident that case would be at the top of the charts if GN tests it. I haven't built in the Torrent, just the Torrent compact and I'm glad it wasn't my money that bought that case. I would have shipped it back.
@basementality4924
@basementality4924 10 месяцев назад
The best compliment from Steve. They made a lot of interesting changes and they aren’t all pointless. Meanwhile this case is pretty much crushing everything else is thermal testing. Never change Steve. Just bought one of these to build in. Super excited to get started!
@yznor
@yznor Год назад
Thanks to your review i got the Lancool 215 and I'm damn happy. Keep up with your case reviews
@konga382
@konga382 Год назад
When Lian Li first showed this case off in one of their showcase videos, I commented to request the molding around the fans to prevent backflow (there were large gaps between them originally). I don't know if they actually saw my comment and listened--probably not, they have very smart engineers who were surely already thinking of this--but I'm glad they made this change anyway. It's something I wish more case manufacturers with unique fan setups did! edit: With vertical GPU fin orientation, you flip the fan around and have it as extra intake. I'm not sure how helpful this will really be, but it's how Lian Li initially showed it off. It's also completely unfiltered intake going straight into your GPU fans, so maybe not ideal.
@shaneeslick
@shaneeslick Год назад
G'day Konga, Yeah it is hard to know as multiple people can see something & get an idea to make change in a similar or even same way, Lian Li staff may have already been working on or waiting for the new fans but wanted to get some press out so just went with fans they had. It would be nice for manufacturers to consistently say if changes are due to feedback when that is the case, unlike nVIDIA who as an example said it was all them who decided to "Unlauch RTX4080 12GB" because after some thought THEY thought the name would be confusing, Definitely NOT all the negative Reviewer & subsequent Viewer Comments for the week or so in between Annoucement & Unlaunch.
@dialdfordesi
@dialdfordesi Год назад
Once I build a new PC I'm gonna go with your recs. The best info I've ever seen on cases (and everything else you cover) anywhere!
@davidzam33
@davidzam33 9 месяцев назад
I bought this exact case after having an OLD Thermaltake case. Night and day diference a great case. A winner. Thanks Steve.
@betterfosset
@betterfosset Год назад
This is absolutely amazing! Low(er) cost cases from brands that do nothing but cases (mostly). This segment really requires competition and innovation the most.
@AbsintheMindMatt
@AbsintheMindMatt Год назад
I picked this up from Newegg based on GN and a few other recommendations. Was delayed in shipping but it arrived yesterday (for clarity I ordered the White ARGB model and I live in the US). I moved my system out of my old NZXT H510. This case is an entirely other level, I had forgotten how spectacular LL cases are. This case is 100% everything that Steve mentions and more in this video. WELL worth the ~$115, I am thoroughly impressed.
@NoahRichard
@NoahRichard Год назад
That's cool to hear - I'm actually planning on migrating my own build out of an NZXT H500, lol. For me it's between this and the Fractal Pop Air, which isn't too far behind in terms of thermals and has some fun color options (but is a bit more expensive right now). Tough decision!
@Dexteritas55
@Dexteritas55 Год назад
@@NoahRichard I picked this case up as well and would form a deeper relationship with it if physically possible. That being said there are a tonn of great options and for me it was important to remember I could get a top of the line case at around 100 bucks and this case didn't disappoint in any aspect.
@femboy_twink
@femboy_twink Год назад
WOW! That's literally what I'm doing right now. Have an NZXT H510 and I'm upgrading to the same White ARGB model as well as the thermals and noise are starting to get to me. Decided to search up reviews of this case to get me excited for it. I'm curious, what are your specs? I'm rocking a 5600x and a 3080 FE.
@AbsintheMindMatt
@AbsintheMindMatt Год назад
@@femboy_twink Do it, it has made everything cooler and it's a seriously impressive case
@hendryroodt3100
@hendryroodt3100 Год назад
bought my 215 because of your review and im glad i did 200mm are maxed at 1000rpm so you never hear them and they flow a ton of air great job guys
@losingmyfavoritegame8752
@losingmyfavoritegame8752 Год назад
Yes! I woke up and saw a preview of the Lancool 216 on Lian Li's page. This is just what I was looking for this morning! 😃
@passerby6168
@passerby6168 Год назад
Kudos to Lian Li for addressing long-requested movable front fan railings to eliminate obstruction whether you stick with the 160s or switch to 140s or 120s. And for the dual position motherboard placement options to aid with watercooling up top or with the GPU ports, while keeping dimensions modest.
@Dji00
@Dji00 Год назад
I had the 215 until switching to the o11 evo. I really liked the case. This case however is much better. Some really well thought out quality of life improvements. They addressed basically every issue I had with the case.
@cggkkl8283
@cggkkl8283 9 месяцев назад
just bought this case recently after watching alot of reviews online. i can say that my money was well spent!
@klorslug
@klorslug Год назад
Still so glad I bought the Lancool II Mesh RGB. Love the airflow and all the room inside it.
@pirojfmifhghek566
@pirojfmifhghek566 Год назад
Can I just say that I really really really appreciate that they've given us two different placements for the motherboard? I can't tell you how many times I've struggled with top-mounted radiators smushing the cpu cables and making things like fan headers a royal pain in the ass to plug in. Usually I just unscrew the whole top of the case just to avoid the hassle, but that's a huge time sink.
@FAT9L
@FAT9L Год назад
You usually spend less time and effort just ripping the top off, versus fighting the case to position things where they need to go.
@pirojfmifhghek566
@pirojfmifhghek566 Год назад
@@FAT9L That's certainly true when you're building a system for the first time, but I'm talking about everything that happens after that. The little maintenance things. Swapping fan headers, swapping the rear case fan, checking/reseating the cpu cables, reseating or swapping out ram (if the ram is tall and the radiator is thick), etc. It sucks to have to take off all three panels, undo all the screws, and then precariously balance the AIO radiator on something while you fiddle around with cables. I'd rather just open the side door and get it done in seconds.
@smartperson1
@smartperson1 Год назад
I love how they let you reorient the little fittings like the IO panel opening and the cable grommet. This is a great level of customization to put into a case compared to the "transformer" cases that took it too far.
@Didymuss1
@Didymuss1 Год назад
Not quite related to the Lancool, but my coasters arrived an hour ago, and they're sick! The pictures don't do 'em justice, thanks very much!
@robind8526
@robind8526 Год назад
You get my like this time for having Patrick explaining some details in the video. Great stuff as always guys.
@omgawesomeomg
@omgawesomeomg Год назад
I got the 215 based on your recommendation and I am very happy with it. Thanks for all the testing which makes life for us consumers so much easier.
@AM-Emergency_AWesome
@AM-Emergency_AWesome Год назад
HIT UP
@giuseppesimone177
@giuseppesimone177 Год назад
Love your case reviews! The gamers nexus team is a gem for pc builders. Thank you all for your thorough work ❤
@Lazarusart
@Lazarusart Год назад
Ridiculous ........... How much incredible detail you go into in these reviews. Excellent job guys.
@R1987R
@R1987R Год назад
Keep these great case reviews coming!
@admiralbosch2851
@admiralbosch2851 Год назад
Lian li has always been awesome. been getting cases from them since 2008
@nielsunnerup7099
@nielsunnerup7099 Год назад
This might be the most positive review I have ever seen from GN. They even put the word "Impressive" in the title.
@mohamedbenguerraiche1616
@mohamedbenguerraiche1616 Год назад
The air/water cooling positions is really well thought. As you said, they are probably going to use this and the fan design on other models, but that's a good exemple of adding value to an entry level product while saving on cost all in the buyer's interest.
@thomasb1521
@thomasb1521 Год назад
A build I did for my cousin early this year had the 215 and it went super well so I'll definitely consider LianLis stuff for my next case.
@afonsopereira1990
@afonsopereira1990 Год назад
Just got the Lian Li 216 white. What a case. Super super good! Great price for the quality and specs. Love it!
@fongvang935
@fongvang935 Год назад
Case of the year 2022, IMO. They could've easily charged an extra 50 bucks and still be better than most $150usd cases. Removable panels are not obnoxious either, with just 1-2 screws and it's out.
@Jay_the_Caffeinator
@Jay_the_Caffeinator Год назад
It makes me feel bad watching my Lian Li Lancool II Mesh falling down the chart. LOL But it is great seeing Lian Li continuing to make these cases better!
@nospleen_noproblem
@nospleen_noproblem Год назад
I wouldn't feel bad since it's a great case. You should see it as other cases performing better since they're newer (the Lancool III was likely only possible given what they learned from the Lancool II Mesh), not as it performing worse - especially since it still holds top spots in a lot of categories!
@hughang8444
@hughang8444 Год назад
Just keep in mind that these tests are always with stock configurations. Fully optimized builds will likely vary, and the Lian Li Lancool II is probably among the top, possibly even exceeding the Fractal Torrent.
@Jay_the_Caffeinator
@Jay_the_Caffeinator Год назад
@@nospleen_noproblem Well it made for a better launch platform for the other cases to follow. Hell I love mine. I still have the stock 2x 140MM in front and 120MM in back. I added 2x Artic 120MM PWM fans on the PSU shroud that blow straight into the GPU MSI RX 6750XT from Paul's Hardware. And that design really works, I have to wipe dust off the side cover every 24 hours of operation. And I added only one so far Artic 140MM PWN fan on top exhaust. I tried putting 2 up there but the cables from my Vetroo U6 Pro CPU cooler take up too much room.
@RicochetForce
@RicochetForce Год назад
A lot of these cases are being made while taking the lessons of the Lancool 2 Mesh into consideration. The case doesn't stop being excellent just because newer cases are better. It will remain great to work in, and it'll remain a great airflow case.
@Jay_the_Caffeinator
@Jay_the_Caffeinator Год назад
@@RicochetForce and worth every penny I spent buying it for $120 during the pandemic.
@CallSignCosmic
@CallSignCosmic Год назад
just ordered a set of the coasters, love supporting you guys!
@diabolowho
@diabolowho 9 месяцев назад
I took an angle grinder to the obstructions in my 215 and couldnt be happier with the airflow. Highly recommend
@Funlu
@Funlu Год назад
Cases in this form factor really need a lot of intake, especially if you plan on running 30 series with an 8+ core cpu. But that extra fan on the back really is a game changer. I’m currently thinking of ways to attach a 120mm to mine like they did!
@vladimirenev1847
@vladimirenev1847 Год назад
I have the lancool II mesh and I'm really happy with it. It seems Lian Li is one of the better case manufacturers these days. However I think most of the credit for the mesh revolution should go to GN since a lot of manufacturers have went with the tried and tested fine mesh no filter front.
@ryancondie283
@ryancondie283 Год назад
I did a value oriented 5700x/6700XT build for a friend recently where I was able to get a bundle with a 650W Super Flower PSU and a Lancool 215 where the 215 was basically free. It was great to build in and the 200mm fans easily kept those lower TDP parts cool.
@gameranand8549
@gameranand8549 Год назад
Thanks a lot to Patrick for information on how to make sure if my GPU will be blocked out in Air cooling mode or not. Really helpful and this is the only review where I am able to determine.
@b0ne91
@b0ne91 Год назад
A couple months ago, there was a popular thread on reddit showing what a huge difference in temps a 92mm exhaust fan over the PCIE slots makes. Feels like Lian Li decided to just slap that on after the fact, because it's incredibly cheap/efficient.
@themodfather9382
@themodfather9382 Год назад
where?
@Murder302
@Murder302 11 месяцев назад
Similar result - with perforation in the door near GPU card (old good cases), and when input fans removed.
@Real_MisterSir
@Real_MisterSir Год назад
Something to note about the optional rear exhaust - it could potentially be an aid for a row of blower style gpus that are low profile for better stacking, and exhaust all their air out the back. Having a dedicated fan to help pull air out, would benefit the blower fan a lot and lower noise levels plus increase cooling potential.
@joemarais7683
@joemarais7683 Год назад
Yeah this case seems like it was made for the blower 4090s. Might actually not be a dumpster fire in this case even with 2 of them.
@Real_MisterSir
@Real_MisterSir Год назад
@@joemarais7683 I do wonder how they will set up the blower card tdps, as in previous gen blower cards there have been examples where power consumption was lowered by stock settings so the cards didn't run hot despite the less ideal cooling solution. And for a card like the 4090, it really doesn't lose much by lowering its wattage consumption, if anything it reaches its true potential in power/performance ratio. But yea, this case would help a blower 4090 stack for sure.
@normified
@normified Год назад
I've been thinking forever "why don't we just add a fan beneath the gpu" and they've finally done it
@cj_zak1681
@cj_zak1681 Год назад
do you think flipping the rear fan around to make it an intake would help by pushing nice fresh air from outside for the GPU fans to take in and help with cooling that way? edit - got to the end of the vid and Steve mentions it, albeit briefly. Would love to see if there's any difference though with it in intake mode
@mikem9536
@mikem9536 Год назад
@@cj_zak1681 For a non blower gpu I see can it helping since it's prodiving the GPU cool ambient air.
@alanmoore78
@alanmoore78 Год назад
While I like the $50-$70 case market with the DIYPC units, Cougars, Thermaltakes, Zalmans, and others...this is a NICE case. I can see using this in a build if we decide not to do the RV thing when we retire in a few years. $110 RGB model looks really nice. Might come in handy as a battlestation at the home base if we go that route, too. Great job on the review, hit all the important points without missing any crucial details, and that's why we all keep watching!
@jamieroseman4429
@jamieroseman4429 Год назад
I've been rocking the 215 for a while now. This one looks pretty good.
@zachcunningham7607
@zachcunningham7607 Год назад
No one can fill the massive void that Case Labs left behind, but at least Lian Li is still making great quality cases for real builders
@keithw4920
@keithw4920 Год назад
Good to see cooling requirements driving the market. I wonder if cases will trend towards bottom triple fans on higher legs as gpu demands go up.
@Dan-Simms
@Dan-Simms Год назад
Great case, well done. Thanks for the review GN team!
@fluphybunny930
@fluphybunny930 Год назад
Love my lian li mesh 2 performance. Picked up open box for less than £70. Been a great case.
@thepolticalone961
@thepolticalone961 Год назад
Rare Patrick cameo
@Playerism
@Playerism Год назад
@Bully Maguire 🅥 n
@CapnSnackbeard
@CapnSnackbeard Год назад
Great segment, good presentation, good flow!
@schit4brainz
@schit4brainz Год назад
Every case review I'm still happy to see the Lancool 215 in the mix. Overall the 215 has treated me well. I'm wondering now if the new 216 front fans will retrofit in the 215.
@SouLerKunG
@SouLerKunG Год назад
Now i'm looking forward to this case for my build.
@toonnut1
@toonnut1 2 месяца назад
I've bought this case pre order and it's been great I highly recommend this case 👌
@SlainByTheWire
@SlainByTheWire Год назад
I would have preferred a slightly wider version of the 215 so the fans weren't obstructed. I'm a big fan of big fans.
@JasonAmoah1107
@JasonAmoah1107 Год назад
Typical fanboy
@mattmanyam
@mattmanyam Год назад
This comment blows.
@MrGorpm
@MrGorpm Год назад
I'd like some narrower cases on the market so that I can fit them into my workspace (220mm width).
@alexmills1329
@alexmills1329 Год назад
@@MrGorpm welcome to the small form factor world
@RicochetForce
@RicochetForce Год назад
@@MrGorpm Narrower cases? Quit being so narrowminded, Roy.
@dralord1307
@dralord1307 Год назад
Finally a case with a secondary rear fan. I have been wondering why cases dont do this. With the heat load of modern computers its needed badly
@katzicael
@katzicael Год назад
I've seen folks do this with zip ties in compact cases like the 4000D to help get hot air out from around thicc GPUs
@cosmic_cupcake
@cosmic_cupcake Год назад
it creates more negative pressure below the GPU, which may lead to it ingesting more of it's own exhaust. generally you want to direct the air upwards to pull the hot air away from the GPU intake.
@JackDisturber
@JackDisturber Год назад
I've sent an e-mail to GN like 3 years ago showing exactly that [DIY Noctua fan attachment to the exhaust] asking them to test this config and if its worth it. Sadly never happened
@cc0767
@cc0767 Год назад
same! Especially weird when CPUs get all the attention with a 65w TDP while the GPU draws 700w
@dralord1307
@dralord1307 Год назад
@@cosmic_cupcake My current case is a full tower. I bought it specifically because it has 3 160 front fans, 2 120 rear fans, 3 120/140 bottom fans, 3 120/140 and space for 3 120 side fans. The 2 rear 120s help a ton for getting out the hot air
@Kampftroll
@Kampftroll Год назад
What a convenient timing, i was just starting to look for a new case with better airflow and watercooling support
@slomotrainwreck
@slomotrainwreck Год назад
Bought a few Lian Li PC 60-65 series cases back in 2005, I'm still using them...
@Sharleee
@Sharleee Год назад
Great case and review! I was thinking about lancool III, now I can potentially save some money and go for 216 :D I wish You included gpu termals with added fan on psu shroud(like You did for lancool II mesh) I think that's better option than this external rear mount.
@redpillgymnast
@redpillgymnast Год назад
Quick note: If you use a motherboard with a Slot 1 x16 GPU slot, you can use the case in water cooling mode AND use the rear fan add on. The air cooling mode is essentially to shift the 2nd slot x16 of the motherboard into slot 1 of the case. If the motherboard is already using Slot 1, there is no need to shift anything and you get the best of both worlds! Many micro ATX boards will work well with the rear fan add on as well as a top radiator.
@kinkeung2412
@kinkeung2412 Год назад
Good to know it
@eliadbb9634
@eliadbb9634 Год назад
sry im such a smooth brain i dont get it, can you tell if "B650M AORUS ELITE AX" able to do that? tysm
@redpillgymnast
@redpillgymnast Год назад
@@eliadbb9634 I believe it would be compatible with both the fan attachment while in Water Cooling mode. It appears to have a Slot 1 GPU spacing. (Basically the first GPU slot is directly beneath the IO with no space between. This would put the IO of the GPU in the top slot, even with the Motherboard pushed down, in WC mode.
@eliadbb9634
@eliadbb9634 Год назад
@@redpillgymnast bless you! much appreciated
@eliadbb9634
@eliadbb9634 Год назад
@@redpillgymnast i found out some reports that people are having some issues with this motherboard. while looking at other mobos i see their pcie slot is little lower than this one on AUROS elite. how can i actually know if it is going to fit with the external fan, since i have to look now for another motherboard to get..
@jayandrew8601
@jayandrew8601 6 месяцев назад
2024 , I just swapped from a nzxt to the 216 and I absolutely loved it. Engineers really put effort in thinking about the consumer
@anonymoose2474
@anonymoose2474 2 месяца назад
Gn got some really high GPU temps here. Have you had the same thing happen?
@NZVIKING93
@NZVIKING93 Год назад
Daam smashing it out the park with cases again loved the 215
@renereiche
@renereiche Год назад
How about a test: How much DUST does a dustcover block... compare 4 cases (open, metal hole mesh, dust-cover-mesh, closed) for dust build-up after 2-4 months of usage. And maybe compare the time and effort it takes to vacuum the dust covers vs. actual cleaning the case (more often).
@JBrinx18
@JBrinx18 Год назад
I had gotten the 215 on your recommendation last year. It's a fantastic case, but I can see what you mean about the static pressure. Still, standard 200 mm fans would be easier to replace than custom 160 mm fans
@Pieteros21
@Pieteros21 Год назад
there are 200mm fans on the market and there are none 160 .. especialy custom mold one's like this case , you just replace them with 3x120mm most probably ...
@shahrukhwolfmann6824
@shahrukhwolfmann6824 Год назад
That is one hell of a case at this price range! Hope it stays that way! For now and forever!
@orbis17
@orbis17 Год назад
Great review as always Steve n crew, thanks lads!
@johnnyc.9488
@johnnyc.9488 Год назад
Would be awesome to see how much of a difference that exhaust fan would do with a 4090 FE (or any other GPU with front to back fin orientation). Maybe a quick individual piece to check that, eventually?
@BlissBatch
@BlissBatch Год назад
Unfortunate timing-sounds like if this had released just a bit earlier, it would've won a category or two in the Best Cases of 2022 video.
@joaopaulodesign
@joaopaulodesign 2 месяца назад
I recently bought this case, the version without RGB, and for those who don't know as I didn't know, the version without RGB comes without the Lian Li hub. Information that is not given on the website or manual. The front fans use 0.5A (I believe 100%) and, to move the front panel to the side, if in doubt, read the manual, it will help you change it easily. I bought the Arctic pwm hub to control the fans, as it uses a SATA cable and is magnetic.
@AlexanderMichelson
@AlexanderMichelson Год назад
Mr. Steve, Sir, I just want to say that you are legend and a God among men! You rock! Thank you!
@utewbd
@utewbd Год назад
Still waiting for a good horizontal case. Been using a haf-xb evo for several years and still haven't seen anything as good come out since.
@DanteJDM
@DanteJDM Год назад
Regarding the noise levels : I think it's important to also remember that every 10Db increase actually sounds twice as loud, it's not linear. So this Lian Li 216 is twice as loud as the NZXT H510 and nearly 3 times louder than the be quiet! DB Pro 900. So it's actually a ridiculous difference.
@DanteJDM
@DanteJDM Год назад
@@ArdgalAlkeides First and foremost, yes. But regardless
@daedalus5070
@daedalus5070 Год назад
Its actually every 3dB
@JuanDi_SDK
@JuanDi_SDK Год назад
​ @DanteJDM @@daedalus5070 3dBs is a doubling in pressure (sometimes it is 6 db, depending on source type and dB type bc dBs are weird like that), but not necessarily perceived loudness. Hearing is weird because our ears also perceive volume increases differently depending on frequency. In the world of audio engineering 3 dB is commonly considered a boost/cut amount that will be perceptible by the majority of people across the majority of frequencies but then again, hearing is weird.
@daedalus5070
@daedalus5070 Год назад
@@JuanDi_SDK oh that's interesting! Not the same thing, just picked up 3db from amateur music production etc
@JiajuChen
@JiajuChen Год назад
But their noise normalized performance also topped the chart, so it just means better performance and noise level at the same time.
@colinjones2910
@colinjones2910 Год назад
Running the lancool 205 myself, love them
@AM-Emergency_AWesome
@AM-Emergency_AWesome Год назад
HIT UP
@xforcepc
@xforcepc Месяц назад
I just started using this case for some of my builds at my company for our high end machines because we don't like RGB. It looked like from the design it would compare very favorably to other cases in cooling. I was pleased to find this review and that it validated my opinion. Thanks!
@supra107
@supra107 Год назад
I really really wish more cases still offered metal panels instead of glass, because I don't need glass, I keep my PC under my desk with the showcase side facing the wall, and it only leads to smaller reliability and larger cost for the end user. Lian Li is one of these companies that's dead set on selling you glass and only glass.
@DavidSiebert
@DavidSiebert Год назад
I would also like it but that is more of a workstation design and less of an enthusiast's. I would agree but I think the high-end workstation market has really gone completely to HP, DELL, Lenovo, and HP market. But yes I completely agree that it would be nice even as an extra cost option but I doubt that it would sell very well. I would love to see one with mesh and fan mounts to make it an air-cooling monster.
@righteousone8454
@righteousone8454 Год назад
I was doing so much research trying to upgrade from Corsair AIR 540, which is an amazing case to this day. Your videos, Steve...helped a lot to choosing Lian Li Evo case, and it will take some time for me to see a case just as impressive as Evo. Lian Li Dynamic is clearly manufactured at the same or near same factory in China, or just plainly stolen design from Corsair Air 540, but it went and perfected many aspects of the design, plus or minus couple of things. 2 chamber design allows easy cable management, and I don't think any case in the near future can mess with Corsair AIR 540 or Lian Li Evo by purely design perspective.
@xalderin3838
@xalderin3838 Год назад
I think I may grab this case. I don't have any plans for doing water cooling for a little while, and having a ATX case will give me more options whenever I decide to upgrade again in the future. Thanks for this! Now I just wait for it to release.
@easyadmin3429
@easyadmin3429 Год назад
Good day Nexus, just received my order! Amazing coaster's ! Build 10, Quality 10, Stability for my Coffee cup 10/10 ! Cheers!
@NetNeelsie
@NetNeelsie Год назад
Thank you for that air mode explanation.
@katakouzinos
@katakouzinos Год назад
Buying this case finally a good looking lian li case
@ignatgrz
@ignatgrz Год назад
With many modern motherboards skipping the 1st PCIe slot air cooling mode can be a way to add more breathing room for expansion cards in the last slot.
@halicon7475
@halicon7475 Год назад
nice job Patrick great job explaining
@XStreet1985
@XStreet1985 Год назад
Just got one. Worth every penny.
@Choralone422
@Choralone422 Год назад
I love my Lancool 215 case! Best $70 I ever spent on a case!
@MUSiCK9
@MUSiCK9 Год назад
OH. OH..! I have never wanted a new case more then I did now. I NEED IT.
@4carhur1more
@4carhur1more Год назад
Those CPU thermals are very impressive for the price point! Definitely going to give Fractal a run for their money in the market of functionality over aesthetics. Best case reviews on the internet! Looking forward to what y'all have to say about the Fractal Focus 2 when y'all have the time to get to it! I picked that up recently and I'm really happy with it when I put my own fans in it. And always glad to see such a good channel run from my home state of NC! I'm strongly considering those sweet coasters and will likely put an order in sometime in the next week or two.
@nauscakes1868
@nauscakes1868 Год назад
I personally love the little fan on the back. I have no use for this case, but the fan is adorable.
@knooters
@knooters Год назад
I've done that pcie exhaust fan thing as a mod for a while. Used 3000RPM Noctua 140mm IPPC fans, and GPU temps dropped by like 15 degrees when running 2x 2080ti's in 4U rack units.
@Kiyuja
@Kiyuja Год назад
I personally would like to recommend the Zalman Z9 Iceberg Midi-Tower. The front IO features 1x USB C 2x USB 2.0 2x USB 3.0 and a Reset Button. The only "issues" with that case are both audio jacks aren't labeled and the panel is on the actual front of the case. It's a VERY good deal for 80€ I found this after multiple hours of searching.
@___DRIP___
@___DRIP___ Год назад
I bought the Lancool 215 based on your initial review. Absolutely love the case, though I do wish it had USB C as well. Thermally though? Ooowee it’s nice and cool.
@Bigcheesestick69
@Bigcheesestick69 Год назад
Thanks, Steve.
@tommyboi4872
@tommyboi4872 Год назад
Nice review!!
@EvilestMinion
@EvilestMinion Год назад
The 216 I think is going to be my first case. I really like it. Funny how I was looking into it a little before they released their video.
@EvilestMinion
@EvilestMinion Год назад
Anybody know a better case out there? I like the configurability of moving the front I/O if I want. And the fact that it comes with three fans.
@Dizastermaster.
@Dizastermaster. Год назад
Just built a pc for the first time in this case. Was pretty decent to build in, got the rgb version and the wiring didn't match the manual, but was simple enough to guess where things went and work the first try. Cable management was decent and had good space for a smaller, simple mid tower build
@UberUdder09
@UberUdder09 Год назад
Excellent case review
@hotweelz87
@hotweelz87 Год назад
I love the look of this case. Nice!
@CBR600xF4i
@CBR600xF4i Год назад
Still LOVE the timers on charts!
@OnionRingsGaming
@OnionRingsGaming Год назад
I built in this case over my meshify C I had and literally dropped 20-25c on GPU temps. The dust filter on the meshify C chokes airflow, plus I only had 4 120s, where as the lian LI ships with the 2 chungus 160s and even a 140 in the back. PLUS a free GPU sag bracket, a case for screws, a removeable top, a fan hub, etc etc so many great features for such a low price.
@wiziek
@wiziek Год назад
meshify c is old, you should compare with some kid of messhify 2
Далее
Top 5 ways you're WASTING money on with your PC!
17:43
Who has won ?? 😀 #shortvideo #lizzyisaeva
00:24
Просмотров 4,4 млн
This Cooler Might Kill Your CPU - EK Direct Die Cooler
18:51
"Google is Getting Worse," ft. Wendell of Level1 Techs
26:07
LIVE: RTX 3090 Overclocking (Air & Liquid Nitrogen)
3:51:46
Common PC Building Mistakes that Beginners Make!
22:30