Incredible Rebuilding Process Of Road Roller Dark hub Drive Plate with Brilliant Skills 

На три вещи не устаешь смотреть, как течёт река, как горит огонь и когда кто то работает

и как обычно трое работает. и ещё 10 сидят рядом.

dont let the matel roller chase you. good work

OMG. WD-40. Pure luxury.

Техника безопасности на ВЫСОТЕно все получается,

I’d like to request to these guys disassemble/rebuild an MRI machine please

The team work is incredible.

Слава богу хоть никому руки ноги не оторвало и то хорошо....ну или вырезали эти моменты при монтаже видео...

هزه ارضيه قويه منذقليل. شعر بها اغلب مناطق سوريا الساعه 4،19 اللهم انك انت الله الاانت الغني ونحن الفقراء نحن عبيدك بنو عبيدك نواصينا بيدك ماض فينا حكمك عدل فينا قضاؤك لاملجاأ ولامنجا منك الا إليك اللهم ادفع عنا البلاء والبراكين والزلزال والمحن وجميع الفتن وماضهر منا وبطن

A man is cheap there. Tools would cost money. In the old time coal mines in the UK a pit pony was looked after better than the miners, a pony would cost money to replace, a miner came with no cost.

إِذَا زُلْزِلَتِ الأرْضُ زِلْزَالَهَا (1) وَأَخْرَجَتِ الأرْضُ أَثْقَالَهَا (2) وَقَالَ الإنْسَانُ مَا لَهَا (3) يَوْمَئِذٍ تُحَدِّثُ أَخْبَارَهَا(4) بِأَنَّ رَبَّكَ أَوْحَى لَهَا (5) يَوْمَئِذٍ يَصْدُرُ النَّاسُ أَشْتَاتًا لِيُرَوْا أَعْمَالَهُمْ (6) فَمَنْ يَعْمَلْ مِثْقَالَ ذَرَّةٍ خَيْرًا يَرَهُ (7) وَمَنْ يَعْمَلْ مِثْقَالَ ذَرَّةٍ شَرًّا يَرَهُ 8

all used man power.... very hardworing👍👍👍

i love watching all these Pakistani mechanical operations but have questions. 1) why do these folks not use air tools, cordless impacts etc? it seems everyone has lathes, drill presses, welders etc. so why not tools that would make most these jobs go much faster. i would like to see some of the more "tedious" stuff edited out. i dont need see all 15-20 bolts reinstalled on every big job. 2) why are there "Sooo" many pcs of heavy equipment around? i never see any major construction projects going on. other than that, i give these folks 2 "thumbs up" for their ingenuity, "can do" spirit and a "never say never" approach to any job. what ive seen done with just basic hand tools still amazes me.

잘 보고 갑니다...^^

ustad imran great man

Everytime i watch one of these show i end up buying a new cordless power tool

When I saw that half round shield that covers top of hub so that dirt doesn't get in the bearings I thought " they are gonna put that U shaped bracket wrong way around so it collects dirt instead if shielding from it". Sure enough. 2:38 shield on top. 17:05 shield on bottom

Он когда варил забыл электрод согнуть

👏👏👍

CHIP & DALE is talking at background 🤓🤓🤓

😃😃😃👍👍👍👍🤝

The round patch is of thinner and probably weaker material than the base plate. And the rough center cut is likely not going to provide any support. This thing is likely to be back rather sooner than expected.

Mengerikan, sungguh pekerjaan yang berbahaya, kurang aman

이들은 얼마나 힘들고 육체적인 노동을 하는지 세삼 느낀다 .

Nice

They have upgraded from "safety flip flops" to "safety sneakers", OSHA can be proud 😉😉😁😁

I could not be a mechanic in this country after working in the USA. Main reason I am spoilt as I have always had a compressor, air tools, and impact sockets. I would never consider taking the time to remove all those rusty bolts with nothing more than a crescent and box end wrench. The hourly rate must be very cheap in this country.,

13:12 Wranglerstar approved 👍

Lots of love for hard working Pakistani brothers

that wont ever brake now good repair

Молодцы😁👍

! ratchet was found---Yea!!!!!!!!!!!

Two are working, the rest are watching))

безопасность и охрана труда на высшем уровне....

لا حول ولا قوة الا بالله العلي العظيم عدد ما ذكره الذاكرون وغفل عن ذكره الغافلون 🌹🌹لا حول ولا قوة الا بالله العلي العظيم عدد اوراق الشجر وعدد حبات المطر وعدد انفاس البشر 🌸🌸لا حول ولا قوة الا بالله العلي العظيم عدد ما كان وعدد ما يكون وعدد الحركات والسكون 💥لا لاحول ولا قوة الا بالله العلي العظيم 🍀🍀🍀الله صل وسلم وزد وبارك على الحبيب المصطفى سيدنا محمد وعلى آله وصحبه أجمعين يارب العالمين 🌺🌺🌺

No era mejor elaborar la lamina calada de nuevo completa.

Nothing is perfect. I like the machine shop segments in between the mechanic work.

How did they know the mount was cracked?

Наконец у них есть трещотка и гайковерт

These guys don't know about lubrication fluids

А если им дать норм инструмент, что будет?

Пневмопистолет бы облегчил работу намного

could probably go help put the Russian tanks back together pmsl

Dungu

Ну хоть кто-то на этих видео резьбу маслом смазал.

I’ve done some work on these machines before and it was painful.

آللـــھمِے🌾صَّلِ🌾وَسُـُلْـﻤ🌾وٌبـ̨̥̬̩ـارگ🌾عَلے🌾سَيدنِـــا🌿🌹 مُــُحـمـ̨̥̬̩ـد🌿🌹عَدد🌾مَا ذگرهُ🌾 ألذَاكِرونّ🌾وغَفِلَ🌾عن🌾 ذِكِرهِ🌾ألغَافِلونّ🌾🌾 ❤‏آلُلَُّـہِــم💮صٍَلُِّ💮ۆَﺳَ̭͠ـــلُِّم💮 ۆَبَْآرِگّْ💮علُﮯنَْبِْيَِّنَْـــآ🌼🌿مُحٍمَّدِ🌿🌼 ۆِأّلَُـﮧِ💮ۆِصٌٍحٌٍبِْـﮧِ💮 أّجٍِمَعٌيَِّن💮وسلم💮تسليما💮كثيرا🌾🌾🌾🌾🌾🌾اللهم صل على سيدنا محمد🌹عدد خلقک🌹ورضا نفسک🌹وزنة عرشک🌹ومدآد كلماتک🌲وعدد الذاكرين🌲والذاكرآت🌷وذرآت وآلرمال🌷ف لأرض والبحار⁦🌺والجبال🌻ولانهار🌻وعدد مالا يحص عدد🌷و على اله⁦🏵️⁩وصحبه🌹اجمعين🌷اللهم امين🌿يارب العالمين🍀استغفر الله العظيم الذي لا اله الا هو الحي القيوم واتوب اليه 🌼اللهم صل وسلم وبارك على سيدنا ونبينا محمد وعلى اله وصحبه اجمعين

For sale. Hand built.

WTF,THEY ARE USING SNIPES AND SOCKETS AND BUDDY IS USING AN IMPACT IN THE BACK GROUND.DO THEY NOT KNOW ABOUT SHARING,I WONDER WHAT HAYNES WOULD ALLOW FOR TIME ON THIS REPAIR. PRECISION REPAIR LTD.😂HOW IS THE WELDING FLASH😭

When that bloke beat that bolt out with a heavy club hammer I stopped watching, So primitive in their methods And not to mention dangerous work environment.

0

👍👍👍👍👍👍👍