We Cut a Crankshaft of Aqua Cruise Ship into Pieces and Made a Giant Crankshaft For Compressor 

ive worked under these conditions and can relate to these guys, not only is it back breaking heavy work that you pay for when you get older and your body gives out on you but it takes its toll on your mental health . this is not fun to do everyday for years, your miserable.

I did my apprenticeship 50 years ago, and I bet, like you, my foreman would have given me a clip round the ear if I'd left my workspace in such a mess or treated my tools the way they did. I also had to wear safety shoes but no eye protection.

I always thought Latin America has very bad working conditions, but after to see this set of videos, I conclude there are modern slavery in other countries where the human life is the cheapest thing into a working place, it is congratulate the person who do the video to show the world, how is the real explotation of the human being in certain countries......going to the technical issue is really disgusting to see how these people discard the accuracy measurement instruments, egipcians of BC worked with more precision of this people, for me is not amazing, is really a show of human poverty and explotation......We must not forget on those countries there are a very small and rich elite that have to maintain the critic poverty to let them to live on the wealth.....When you see this type of video anybody can conclude that America is the most balanced country in the world.....

I dream of working in a machine shop. Maybe a dumb dream but metal work has appealed to me ever since i first got to use a lathe in high school. Lathes, mills, bandsaws, welders, torches they are so much fun and satisfying.

@@guillermojorgenardi570 America é um Continente... EUA (USA) é um pais. obrigado.. de nada.. concordo 100% com você sobre a exploração humana...

@@guillermojorgenardi570 "it is congratulate the person who do the video to show the world, how is the real explotation of the human being in certain countries......going " i need to ask you who is exploiting them as they clearly are not part of some big corporation and working there in this conditions because this is how the reality there is and they want to work there like that... If you want to talk bout accuracy then first you need to actualy do a proper measurement of the element in question... or are you claiming that by eye-balling what you saw in this video (that is on top of it played much faster than it was recorded) you are able to take make more accurate measurements than this guys with tools?🤣

как могут, так и делают. А как иначе учиться? Еще 20 лет назад эти люди собирали в джунглях орехи.

Эти люди если их так можно назвать, потом для конченого автоваза делают детали, которые через пару тысяч км, превращаются в гавно из которого эти черти его и сделали. А о точности там и речь не идёт, эти типа люди делают полное гавно...

@@Vperedsmotryashii 20 лет назад эти станки были уже в работе и не один десяток лет. и в тех же местах. так что про орехи детям рассказывай. подсказка, англичане когда ушли из пакастана-индии?

Станки конца 19 начало 20 века, так делали первые двигателя для всей техники. На них ездили, летали, плавали, тысячные начали ловит потом. Некоторые даже до сих пор работают. Китай работал так-же, теперь как.

@@user-xv8fk7yj6k такое чувство что не они отстали в развитии , а мы.

Aaaa

Indiana workers

Это советское оборудование там погрешности микроны лучшее оборудование в мира по сей день

@@shreddertm6736 хуюдшее оборудование. Открой глаза, совкопитек. Советскому союзу везли запчасти с Запада в обмен на газ и пшеницу. Ехало самое отребье, худшие станки. По сравнению с немецкими, американскими, японскими станками - советское и российское барахло просто курит в сторонке. Если ты хоть немного имеешь отношение к технике, наверно в голове причинно-следственную связь сможешь установить почему в мире покупают технику BOSCH, Makita, JET, Caterpillar и так далее.

@@shreddertm6736 Скорее всего там английское оборудование. Это бывшие колонии Великобритании.

@@shreddertm6736Какие там нахуй микроны? Они поковкой прям по направляющим долбят, дай бог если оно в десятку точит. Хотя для компрессора пойдёт.

@@shreddertm6736 у них чертежи в дюймах) и меряют линейкой

ในล

​@@user-bk2do5qf9u❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

No kidding, it’s a real treat.

Πππππππππππππππππππππππππππππππππππππππππππππππππ

Same here and totally agree with you it's amazing

I'm also enjoying how these Pakistani Technical People working, they work as one, sharing their skills.... I have a lot of Pakistani Friends in my 28 years in Saudi Arabia, they are friendly and industrious people... now im here in the Philippines I missed them all....This is the reason I enjoying watching the Pakistani Technical Workers....Keif Halik Sadik?

@@user-cu4uw7vr4m 980⁰

I don’t understand why people always see these videos and think the way they work is amazing. White people did it this way like this 100 years ago, these people literally have a blueprint of how to do all this from whites who pioneered it and they can barely even copy it correctly. They are lazy af and put in the absolute bare minimum effort and are too lazy to innovate. The amazing work is the people who built giant machines to do all this. All these tools and giant machines were built by whites because they work harder and smarter. It’s like seeing a group of people using a piece of flint and grass to light a cigarette. The person isn’t an amazing hard worker for doing it that way, it’s because they are to dumb and lazy to put in the effort of building a gas lighter. Look at these peoples work spaces, they are too lazy to even stay after work to clean it up. If they were hard workers their communities would be nice and clean

ny ny koi okývby

have you noticed? no safety gear/glasses for these guys-they are engineers.

Čista zafrkancija druže moj. Vidiš li ti na kakvim mašinama izrađuju radilicu, vratilo? Ne može ovo da radi, vidiš da nisu ni rupu za ulje izbušili na mestu gde treba...? Ovo je čista šala...

​@@maureenleckie6216You Jealous 😂😂😂😂😂😂

@@DaniLex-un7fh what am I supposed to be jealous of?

не зря же он называется колен-вал

сомневаюсь что точность посадки под подшипник достижима таким образом.

@@user-nh3he9ds4e точность посадки ,вероятней всего, компенсируется кувалдой

И на бую они видали эти " ваши " чпу , сертификации и прочее ... Пацаны свое дело знают !

Для компрессора и так сойдет.@@user-nh3he9ds4e

Думаю проблема не в его отсутствии.. А в том, что они им не смогут работать.. Кувалдой все махать умеют

something to consider... India's successful mars rover that landed cost 73 million, Americas cost 1.03 billion...

@@jdsingh1670 this is pakistan not india

@@jdsingh1670 Сэкономили на чертежах.

@@jdsingh1670 they did not put a rover on Mars. They sent an orbital craft. NASA has actually put 5 vehicles ON the surface of the planet. ‘Curiosity’ landed in 2012 and its still working. China is the only other country to put a (1) vehicle on Mars. Props to India but an orbiter is nowhere near a rover

@@jdsingh1670 this is not Bharat, this is pakistan, Bharat mein aisa faltu kaam thodi hota hai

I agree. But these guys make less than $300 a week. Just enough for the clothes on their backs and to get to work. Somewhere, someone is making decent money off these guys, but they will never see any of it.

Mostly true but some rods don't lend themselves to slag like that.

Yep, I have tore a many pcs. of paper in my days

Lol! Like that original shaft they started with came out of a back street shop.🤦‍♂️

Those guys are not engineers.

engineers aren't required to do basic lathe work in dangerous workshops.

Amazing

This is how it's always been done, cad spoiled everything

Fabulous all things considered with fairly limited resources

The British built the modern world with this level of technology

@@tbrowniscool Maudsley's, 'Trolley' and the Bramah Press.

@@tbrowniscool It didn't go that fast with carbon steel in the tool post.

Pakistanis are incredibly engineous to the highest degree of engineering! I know them from Dubai (Emirares Engineering Foundry) where, back in 80's, I had brilliant work from them to re- fabricate a 400kg heavy flour grinding machine. The original sample machine was from Christy & Norris of Chelmsford UK. My name is Geyash from Tanzania.

When they put that piece on the second lathe it was nice and shiny surface finish on the one side. By the time they took it off it was rusted again lol. Definitely high humidity.

Я так и не видел как грели судовой коленвал хотя наверное резали еще пару раз

Literally a nails on a chalkboard moment for me when i saw that...and the hand drill using the tailstock center 🤣🤣..do they not have chucks and center drills?

@@chuckfoye4563 Welding over rhe bed aswell.. Zero common sense.

I can't believe how skinny that chain was that they were lifting that huge crankshaft with that was like frightening

Советская продукция до сих пор в строю ! 🔧🔨

Pretty astounding how they drilled that hole.

You see the lathe bit at 30:23, clearly has not been dressed in a long time (aka ever)

39:45 - You want the hole centered..... so like even if a tiny part of it is touching the center, dose that count?

For how long will it work?

Well... The pyramids where built to... With great precision

No, it will be the Capitalist of the Year award.

And bicycle cranks after that!

так там все в дюймах. допуски выше, чем в метрической. так что пофиг ))

all the little bits of metal flying around with no eye protection ....bit dumb

How is it wasteful? The metal is being reused for other applications…

Thanks

It slowly changed over time because in the very beginning, the danger was hard to accept as part of the job and many lost life and limb then the next generation wanted safety because their dads had died or lost limbs. Then by the 60's the unions started to fall apart because women entering the work force produced an over supply of labor and of course the campaign against unions and by the 70's employers had convinced employees that THEY had assumed the risk by making the choice to do that job. By the time the "Love Canal Disaster" happened and the EPA, OSHA were started by Nixon, the work culture had flipped. There was a period where the liability was on the owner, not the employee, but corporate law was changed so the liability was on the employee as assumed risk which changed the work culture and when unions became weak, there was no single organization that really carried the flame of workers rights forward. Today, people are totally brainwashed so they work for, accounting for inflation, on average, the same wage they were paid in 1970. In 1970 the average wage was about $3.70 per hour, today the average wage is about $26.00 per hour which is about $3.70 in 1970's money. When looking at those numbers you have to keep the sin of averages in mind which means the average worker makes much less that $26.00 per hour. Energy, housing and food are not part of that equation which means it's actually worse. On top of that since 1970 productivity has increased about 56%. It's not that people do not want to work, it's that you cannot survive on what is being paid. A foundation of economics is that people respond to incentives. If the market is flooded with jobs that only pay $18.00 per hour and it takes over 70 hours of work to live in the top 20 cities in America, there is literally no incentive to work. There is the concept of scarcity which is very important in employment in motivating people to not lose their job and to work hard. If you are paid well, you don't want to lose that job and you will do whatever to keep it. But because employment wages do not operate in a free market, the market cannot correct itself so you have a market failure which creates an oversupply of jobs that cannot be filled yet very low unemployment because so many have dropped out of the work force. Wages have been stagnant since 1970 and kids are not stupid.

U r very right sir

Ходид а это главное.

@@fannyp7958 что такое ХодИд, имя токаря?

Да там всё бесподобно😂

Yes they go through all that work for nothing very low pay and so much danger .

you're just jelly cause you can never machine as good.

Sounds like a urban legend. What company is going to advertise to injury lawyers like that?

Don’t mistake what these guys work in for a steel mill.

qqqq

New friend welcome very nice video .

Reportable? If they can get home alive and with most ofvtheir limbs, it's not reportable.

you think they will give that kind of work to a newbie?

เครื่องในที

No safety guy overhead expense, or safety guy hassles over ridiculous stuff that stops the work getting done. Mike Rowe did an interview on safety titled "safety 3rd". Check it out. I do agree that these guys throw a little more caution to the wind, but that is how stuff gets done.

No

@@Senkino5o ???

Very amazing indeed.... its about 120 years behind today...i worked in the 1960s areo craft machine shop. It was very advanced...................Willie

Finely honed.

And an INCH ruler at that! Where are the metric inquisition priests preaching hellfire and brimstone down on the heretics? Or are all the inch-slurs reserved for the U.S. only?

@@rharris22222 maybe they were a British colony? But yeah I was surprised as well

Amazing what a properly calibrated human eyeball is capable of.

@@mickthemonkey ISO-17025 calibration standard??

40-60 years for lathes ?

@@user-qv6ud2hx6f : Many (not all of them) were designed for wide-belt drive from centrally powered jack/counter shafts. They were later converted to individual motor drive. Wide belt/centrally driven equipment was phased out in the 1920-30's. So, it is cool to see those machines still living on after all these years !

11nj

I know! I've seen them use a lathe in such a wrong way yet they were precise enough to cut a hole to the perfect size for a press fit bearing.

ลบลง

@@mlppmlpp5702 English translation; delete?

@@immrnoidall HACKS

К - капитализм. Чтоб рубить бабосики капиталисты насильно удерживают преступными средствами подобные Пакистану страны в нищете чтоб эксплуатировать дешевый труд их жителей для получения сверхприбылей

@@krypton1886 что за бред ты несешь?

@@AlexNSK1, ты хочешь сказать что это не так?

@@krypton1886 Это не так

@@AlexNSK1, я так понимаю ты про неоколониализм и его методы не слышал еще?

Hmmmm, don't know how to breaking to you but if the repugnican party ever gains power to do so this is exactly whut the future will be in these UN-United states will be for the common man there ain't not one country that has an oppressive authortarian government the common man is reduced to the bare necessities and antiquated industry. Ingenuity is not every man's ability but some are fortunate enough to have money to bypass the necessity or have machines to do the work. Movies like ready player one are not to far off about the future.

Grunt labor is still a major fact in those and other industries. Somebody always got a better more efficient way to get things done and mainly by computer and machinery. We marvel and at how intricate, complex, sophisticated, geometrical beyond the apparent capabilities of that civilization then you dumbbasses criticize the ones who with a mnimum of computer and mechanical assist can turn out prefect examples of their craft. If a superior and sentient and curious entity will dig up some of the ashes the world is reduced to and wonder how those people could do this wonder of manufacturing and building without the use of technology just like they do this present day

Ron assembeling polless tribel zona

Steve, scary as hell huh? Just amazing to me. //ji

Unfortunately, in those regions feet are cheaper than safety shoes.

Steve, Rusty - sort of funny that after thinking about this video since I viewed it, these guys in the first part anyway are lifting peices that are so heavy that steel toed safety shoes probably would do nothing to prevent injury and may even be much more dangerous. If they let one of the 700lb flywheels drop on their feet it would simply crush the steel under leather and then no one could get it off their toes to stop bleeding. It's amazing at the sheer danger they endure including no ear, eye or respiratory gear. How long would any of our fellow Americans last at these jobs. Not only could they not do it, 90% of them are not technically educated enough to do the math and measurement required. Sad huh? //ji

@@Rubin5342 "How long would any of our fellow Americans last at these jobs." We did this here in the USA back in the 19th century pretty much the same, there was no OSHA, no safety guards on machines

sandals and pajamas eh!

Из коленвала

Они бы из него нокию3310 сделали бы телефон подстать коленвалам 😅

I would at least grind the edges smooth before the eccentric milling so your arm gets torn off nice and clean.

@@matthewchin6454 hhhhh

USA! Our government would shut this operation down before it turned its first crankshaft. We have very strict job safety laws.

I would have liked to see the final application of this crankshaft.

@@kingofcrunk4237 me too

NO safteyr eye protection or boots there eh

I also enjoyed a final chapter on how this crankshaft is installed to a machine part

Sponsor one of theme’s visa so they could come work for you for better wages

похоже на колено , но для чего понять не могу

Про расход Газа и эл.энергии даже не парятся

просто оч хуевый труд , других слов нет. я у них кроме рулетки других инструментов снятия размеров даже не видел + они все без защиты ходят , что весьма странно , потому что я там не вижу одноглазых

@@65-Region заголовок прочти - коленвал для больших компрессоров

Esse é o novo caminho para o trabalho, se vc não está preparado... 🤔🤔🤔

Perfectly described

Or from 1940ties Australia!

@@janvisser2223 more like pre ww1 except they were more accurate back then

They is be in 🇵🇰 Paquistan

You clearly never worked with US machinists

@@Trident_Euclid ...I have, at the company were I'm employed...I'm saying, with the limited resources they do a pretty good job.

@@frankpitochelli6786 well. I can't argue against that

que ironico que su pais sea desarrollado y tenga cohetes espaciales y bombas nucleares pero no eliminen la pobreza y el desorden en sus ciudades

😂pk is centuries behind the world. Its bound to happen when their disease doesn't allow science😂😂😂😂.

Cotton aren't they? Not very flammable then, unlike 'modern' petroleum based synthetic fiber clothing.

They stay damp with sweat and grease. Basically asbestos lol.

A

10:33

The whole freaking video is unsafe, you really want to just point out the least safest part of it? Those metal streamers from their lathe cuts will snatch a person in a second,any machinist worth a crap knows your cuts should produce chips,as fast as they were running that lathe the streamers would have wrapped his ass around that shaft before he could shit himself.

And probably way off spec and elwill live a very short life before failing

интересно , почему точат без охлаждения и смазки?

​@@user-bm5ub7xb6kэкономия?

@@user-bm5ub7xb6k и варят без всех средств защиты, это норм?

Western hobbies and sports like TT race, sky diving, skateboarding, parkour, cliff diving, rock climbing, mixed martial arts, etc have safety issues, all done in the pursuit of adrenaline, admiration, and bragging rights. These people make do with the cards they are dealt to put food on the table.

I was about to say "at least they're wearing shoes"... but that didn't last long

Where was this?, After seeing the comment I sped through the video

Тоже так думал, представил мастаб сварки электродами.

точность на бмв нужна. а на компрессорах, что они делают, +- пол десятки можно поймать. и этого достаточно. в отечественную думаешь рем мастерские на фронте чпу станки использовали? примерно тот же расклад что и у пакистанцев сейчас.

Точности там и нет

Unnecessary protection??? That machine is one of the most dangerous machines are in production. During years working with it, I have seen really serious injuries, even with protection.

@@sergiopm.474 It was sarcasm, friend. A joke.

Also they did not have the expense of precision measuring equipment. I cannot fathom a machine shop lifting a just finished turning with a chain and polishing it on the stones and dirt. It seems to work for these gents. I'm trying to determine if they are in India, Pakistan or...?

@@jeffryblackmon4846 😅 OK 👍 buddy.... here, you never know....

@@jeffryblackmon4846 I didn't look closely - are you _sure_ the ruler wasn't made by Starrett?

This is funny. I read your comment about safety sandals and spent the next 10 minutes freezing the frame and backing up and going forward because I have never seen safety sandals before. And then comprehension crawled into the room. You made my day!

🤣🤣🤣

Making fun of poverty is pretty low

@@MrPINKFL0YD They are not soo poor, they are RU-vidrs!

When you don't have a OSHA organization...this

Thanks 🙏

@@DiscoveringSkills wheres the giant crank

What shape? They cut up a precision part made in Augsburg into a pile of steel, where is brillance here? Oxy torch does it. Hard work? Yes. Protection equipment and safety? Wrong place.

It’s CNC machining. “ Close. Not Close”.

It has to be spot on with the RPM it's going to be spinning at otherwise it would be a cluster fk and they are obviously used to doing it.

Look like they turned 10,000 lbs into 100 lbs

All that and in my opinion a better work environment than the usual U.S. manufacturing facility. Outdoors, no assembly line, lots of teamwork, problem solving and variety of tasks. safety wise it is way sketchy but I didn’t see any missing limbs.

@@leebatt7964 Of course not. Those with severe injuries are immediately replaced with ones from the line up outside the door. Exactly like the early days of Henry Ford’s factories.