INE DMVPN Webinar 

19:35 basic component 36:01 Overlay 42:50 DMVPN phase 1 48:00 DMVPN phase 2 53:54 DMVPN Phase 3 1:03:42 Configuration

Minutes 49:00 and 55:00 finally made the difference between phase 2 and phase 3 crystal clear for me. Phase II = Request, Forward, Reply Phase III = Redirect, Request, Forward, Reply

Best DMVPN video I ever watch. Detail n deep

where ever you are live long, you cleared a lot of doubts in 2hrs , kudos to you

The best material on DMVPN I have come across ... explained in full detail and so simple to understand. Great work Rohit !

I like this guy for his frankness.. its refreshing. I find cisco hard as i dont have a good memory, im better at programming complex ideas, remembering all the cisco stuff and labs is overwhelming.

42:43, what a clear table, explaining overlay, underlay, how clearly mentioned that overlay can have multiple names and similarly underlay with their multiple names, kudos to Rohit, i was too confused before watching this video, now everything makes sense

watched rohits multicast video and now on to DMVPN. amazing explanation.

excellent explanation

Best DMVPN video ever, no comment.

BEST dmvpn webinar ! Rohit rocks!

this is really amazing!!

Best detailed video for learning dmvpn concepts

5 CCIE's is amazing!

Great achievement.Graet webinar Ever. Thanks Rohit

Excellent Job Rohit, I am glad that i met you in Bangalore HSR layout long back

First: This is excellent content! Bravo, great explanation! And now for the nitpicking: Buf if you summarize to the extent where the hub just sends a default route, that route will not be installed in the rt since you already have the default from the underlay. And that't the good case. In the bad case the eigrp AD will be better than your underlay default AD and you will end up flapping back and forth. Maybe the hub could summarize your internal addresses, RFC1918, what have you, or maybe you could go for a front door vrf/ internal vrf/vrf aware ipsec setup and have them separated.

this guy is a CCIE addict!!! i'm sure if there are more CCIEs he will book for them.

Very well explained ,concept as well as configuration.

What an awesome video with training content. Thanks for sharing :)

Best one in details, clear most of things👍

For example: Eigrp is running on overlay. BGP on underlay. How does traffic is carried on ISP? After encapsulation(encap with NBMA add) the traffic will be carried by BGP?

Just excellent 👍

Hi Rohit you are a great teacher thanks.

very good explanation. if not understand watch it three, four......time.

There are some mistakes on ip's like 133.2.2.2 and in diagram it says 133.1.1.1, please correct that

Very well explained !!!!

Very well explained, Thanks

Thanks...you are very good.

Many Thanks, really very useful and detailed job

Do you have to use “mode tunnel” for the IPSec?

awesome video ...thank you.😍😍😍😍😍😍

How long does it take to update a spoke when a dynamic IP changes on another spoke, what's the downtime?

amazing !!

Great !!!

Amazing, thank you so much for this video

Hat off !!!!

Very good and useful seminar. One query, cant we use BGP as overlay protocol?

In hub and spoke topology How multi-as issue resolve .

himan can you please stooooop that! hahahah

Hi Very good video. I am trying to configure in GNS3. DMVPN Phase 1 and 2 working but phase 3 not working. In DMVPN phase 3 next hop is showing through Hub only. Any suggestions?

The best one, very detailed, Brian was going too fast, the best part is, everything is broken in parts, keeping it simple, right from fundamentals with very good examples, no slip of tongue, very well articulated

do we have similar INE webinar for IKEv1,IKEv2 ? or any VPN?

hello, what should be the ISP cloud config?

Nice!

Can you please guide how to establish VPN over LTE network with dynamic private IPs?

Tutorial mostly ok, but is full of mess/confusing points like in 31.07 min. Author puts private, public, underlay, overlay and tunnel IP address in one sentence so I dont know whats what. Same in 46 min. How hub knows the destination? He dosnt have in NHRP 10.1.0.0 address. What is in packet that is sent from S2 to Hub? Finally: so what hub,spokes are looking at: routing table or NHRP table?????? Also NBMA address on S2 changed to 133.1.1.1 for some reason in 48 min (pictutre)

is this a DMVPN webinar o biography? LOL this guy is way high in ego.