INFINITI G35 / NISSAN 350z - FRONT CAMBER KIT | Stop tire wear problems 

I really enjoy your videos man, I just bought my 350 in dec of '19. I'm disabled and can't do this type of work myself but like knowing what I am paying a shop for and your videos nail that. Keep it up, your G35 is amazing.

Picking up 2008 g35x soon and I'm glad I found your channel.

Best RU-vid page for G maintenance and upgrades!! Love your vids man keep em comin

Dude, You are the BEST G35 RU-vidr. Leagues above all these Boy racer channels. I'm glad I found this channel. Thanks for all the useful info, I just got a 04 Coupe 6 speed and I'm looking forward to your content.

Nice video, pls can you make a video of the proper position of the Jack stand on a G35 coupe.

Jesús Tyler, I wish you made this video at the beginning of the year, I changed my upper and lower arms and tires already. It wasn't pretty.

I thought the issue for the camber wear had to do with the lower ball joint that’s pressed into the spindle

I wonder if just going with an SPC more adjustable ball joint with the stock control arm assembly would have the same effect and be a cheaper solution?

Did you have to install the jounce spacers later on to prevent bottoming out?

Hello Guys i have a 350z and my upper control arm is grinding on my tire cause it to get flat over a short amount of time. I bought a new tire not even a week ago and it destroyed my tire. I was wondering if this was the only problem causing it any help would be appreciated.

Hey man, I have to do this and I'm wondering if I should replace other components? I have a full set of BC Racing Coilovers I need to install, and I'll probably just go with SPC Upper Control Arms since they seem solid. But since I'm going to be down there, you think I should replace anything else? The car has 130k miles so 🤷

fun video

Fukk.. I just bought all four DWS 06's... now I gotta worry about them wearing out on my Z.. Did this actually fix the wearing issue?

when are you planning on getting the admin intake and tuning? Looking forward to that video!

Go lex Brodie they have good tires I had mind from 2012 till to say. Qustion what year where thoes tires made?

i just installed these today on my G and i slid the ball joint all the way out inside of putting it in the middle. is that fine?

does the car from the front start to begin making a sound when the tires r getting worn out

i SEE you have stock spring buckets because of your coilover setup. if im running a BC coilover setup, do i need to replace the spring bucket with aftermarket toe arms to avoid any problems? PLEASE LET ME KNOW! been all over forums and need your opinion! @MotordyneG35

what other brands do you recommend? one that is not that expensive

"...jesus Tylor!!!" Looks like my wife. Lol

great video....how could i fix positive toe on my lowered G35 coupe?

Very nice deal! Where did you find them? I definitely want to grab a set for my car. I've got the rear camber arms in but I need the front arms since I still daily my car and man it eats my tires away on the inside. Keep up the good videos bro

where did you get the torque specs from?

Great video, did you need to use the shims to get spec camber? Supporting your channel.

Hey bud how are your tires holding up?

How low were you on the coilovers?

But why would you stop negative camber? :o

I have the exact same tires and the exact same issue lol

I saw the install but how about the adjustment of the front camber? I'm trying to adjust my negative camber up front. Need a good video to follow.

Is there a camber kit like this for 2003 Infiniti Fx35 Rwd? Thanks

How are the tires holding up after the camber kit and realignment after 4 months? Finally fixed the feathering issue? (Please say you found the right combo

Why not buy from NEDs?

I recently lowered my 03 sedan. Roughly about 3 inches. When I buy these control arms and install them, does it automatically fix the camber or do I have to adjust that top piece first before installing them?

How does the car handle now that you have changed the front end

You should buy your tires online and have discount mount them for you. You would save a shit ton of $$.

LOL "ehhh..." @ 3:18

Best tips on getting my G to around 350-400 whp?

Did You only replace the upper control arm or did you replace both I have the same problem

Hey man I have a couple questions about fixing camber any help would be appreciated. So I have lot of tire wear on my rear tires on the inside and I was thinking I can just grab camber bolts instead of camber arms and grab toe arms to adjust from there instead of spending $200 more on camber arms

Do you think that this could be my problem? My z goes through both front tires every 1 or 2 months I really dont know why though?

I got a question about your motordyne exhaust does it pass smog? Thanks

Picked up a 350z That had been dropped a bit and this absolutely eats away at the front tires

Update so I took my car to get this installed they said it was all good to go . I drove it home all good but than when I was pulling out the drive way to work the right side made a weird noise I got off the car to look at it and the big SPC nut re adjusted it self inwards . I'm pretty mad they did something wrong at the shop :(

I have SPC as well and I still get tire wear camber wear It's very natural for our cars to go through tires and 540 bucks for 2 tires ?? Don't buy from discount tires online is where you need to purchase that's ridiculous you're gonna be changing tires soon anyway props videos though

She sounds like my wife when I hit the gas too haha 😂

So I installed some cambers but it seems to be hitting the wheel well any ideas why got a 05 g35 coupe

So you will need both the Upper control arm and the camber kit to fix the inside wear? Or it will fix with just the upper control arm?

i bought some Godspeed adjustable control arms for my 04 G35. i laid the stock control arm and one of the $215 (per pair) side by side with the bolt hole ends resting against a wall. MUCH to my dismay, i had used up the entire available slot and the the damn thing measured exactly the same as the stock arm. i place a tape measure level on top of the ball joint and extended the tape measure to the wall. 11-11/16". I run a fab shop so i had my fitters cut the control arms and make them longer by 1-1/16". Now, guess what? the damn contol arms are too long. I was able to correct my negative camber, but now the longer control arm is trapped between the knuckle and the body of the car!!!! the longer contol arms don't fit in the stock control arm well. has anyone had this problem. i am about to cut out just enough of the sheet metal to allow the longer control arm to swing freely.

Ugh the KWv3's are so nice but why do they have to be purple and yellow??? I know I know, if you don't like 'em just get 'em powdered. Ok Ok.

Wouldn't it have just been easier to take the strut down entirely by dropping it from the top mount bolts to get those control arm bolts out and that way you don't mess with your strut adjustments at all..?? Just saying.. 🤔🤷‍♂️

Will these control arms fit with any coils?

A shop told me they couldn’t align my tires cause my front right control arm was shot. He said that if I buy another oem control arm they still would not be able to do the alignment, that I needed adjustable upper control arms in order for it to work. Is that horseshit or not? Cause I thought oem parts are recommended in most cases

This was literally the next mod on the Z lol

👍🏽

Don't ever pay that much for tires. I get 'near new take-offs 275/40/17' Michelin's for $70 each at a tire shop down the street. I would never pay that much. Tire warranties are a joke anyway.

Anyone that values their hearing, remove headphones

Manufacturers need to stop doing this, it’s retarded. My car does the same thing. Installing control arms tomorrow.

You mean foot pounds.

Those tires are the worst for camber, get better tires

After 400 miles, you need to re torque your new suspension parts 100% proven by Nissan themselves, call your nearest Nissan/infinti dealer.

IDK WTH is up with the mad sound effect transition but it makes this video impossible to watch because your voice is about 1/10 of the volume. have to watch with captions absolute video failure dude.