INNOVATION! Insulation with sprayable foam

Подписаться 9 тыс.

Просмотров 173 тыс.

50% 1

In this tutorial we introduce you the new innovative sprayable foam and show how to insulate different surfaces with unique spray nozzle.
In rooms or for construction parts with insufficient insulation, a solution is fragment insulation.
From the point of view of cold bridges, critical spaces are sheds, garages, attics, basements, balconies, tanks, piping, etc.
PENOSIL EasySpray sprayable single-component insulation foam is especially meant for these applications, ensuring thermal insulation and air and water vapour tightness when cured.
Instead of traditional bulky insulation boards and fasteners, insulation can be conveniently made on site with the help of spray foam.
Read more about this product here: penosil.com/uk/product/easysp...
PENOSIL EasySpray Sprayable Insulation Foam is now live for purchases made online in UK: www.sealfix.co.uk/penosil-eas...
#wesaveenergy

Хобби

Опубликовано:

3 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 153

@lewisgrogan3317 3 года назад

Interesting product I very much like it

@beck7394 3 года назад

Awesome

@nbkTVChanelbelajarbonsai 3 года назад

I like this video

@1downland 3 года назад

My garage roof is corrugated asbestos and drips with condensation. Will this product stick to the underside of this ? Or should I use any special treatment first. What roughly is the coverage area of each can ?

@PenosilOfficial 3 года назад

The product adheres well to corrugated asbestos. The only thing is that it is difficult to spray on a wavy surface. We suggest moving perpendicular to the waves. Before applying the foam moisten the surface. It is best to use a sprayer where the liquid comes out in a gentle mist, not as water droplets. The yield is 1 m2 per can when sprayed as 3 cm layer.

@1downland 3 года назад

@@PenosilOfficial Thank you, I’ll probably order this and I’m not to far from you 😀

@franklinchavez2358 3 года назад

Seguro que si no va a haber problema.

@msSuukkoII 3 года назад

First I was excited, but it didn’t stick well to the new clean sheet metal plate. I bought 10 bottles, two did not work. Apparently the pressure was too low because it came out just straight. Did not spread when spraying as it should. In Finland one bottle cost 20 euros. A little too expensive. Otherwise, this is a very good idea. The absolute maximum yield is four square meters per bottle, just a thin layer.

@PenosilOfficial 3 года назад

Sorry to hear it. There may be different reasons why you didn´t succeed. Spraying quality is affected by the can´s temperature during the application (avg. +18-28 °C). Gun foam flow regulator should be also completely open. The foam doesn´t adhere when water particles haven´t absorbed or there is too much water during the moistening of the surface. The thickness of the single foam layer shouldn't exceed´1,5 cm The foam is meant for fragment insulation or for several places in buildings where the use of conventional insulation materials is not possible. For total thermal insulation, there are cheaper building materials.

@sampentti4360 3 года назад

@@PenosilOfficial Thanks for the answer. The temperature was + 22`C. The purpose was to make a thin layer to prevent water condensation. I had cleaned it with an oil remover. The surface was a clean steel plate in the boat. I thought it was as sticky as urethane but it didn't stick so well. After a week the foam had come off the hand-sized areas. It did not fall down, but was loose like a bubble in the wall.

@PenosilOfficial 3 года назад

It seems that the surface wasn´t sufficiently moistened. This is the reason why a bubbly-like base is forming and there is very poor adhesion. It is best to use a sprayer where the liquid comes out in a gentle mist, not as water droplets. @Sam Pentti

@joshuamaragni4553 8 месяцев назад

How much pressure has to be in the can for the fan spray to work, i have a tip and gun but i have the same problem it just comes out in a straight line. I opened the gun nozzle all the way

@PenosilOfficial 8 месяцев назад

Hi, are you using the Penosil EasySpray Foam with the spray nozzle and it doesn't work? Or are you using a different foam with the spray nozzle? The Spray effect is achieved by combining together EasySpray Foam's special formula and spray nozzle. It will not work with any normal foam.

@eulachonfish 3 года назад

Is this sprayed through a regular foam gun with the supplied nozzle placed on the end? And, any plans to sell this product in Canada? Looks good for draft sealing cavities that will have fiberglass insulation installed as well.

@PenosilOfficial 3 года назад

Yes, the foam is compatible with most of the foam guns and the spray nozzle comes with the product. Canada will be one of our next markets.

@dimitlakis 2 года назад

@@PenosilOfficial can u send to Greece?

@PenosilOfficial 2 года назад

Unfortunately, for the time being we don’t ship to Greece. Sorry for the inconvenience!

@avdushberisha1374 Год назад

Can you send to Ireland

@PenosilOfficial Год назад

Hi, we do have a distributor in Ireland who sells Penosil products: National Seal Systems Limited. Alternatively, we have a UK supplier who holds EasySpray in stock and can ship to Ireland. www.abbuildingproducts.co.uk/catalogsearch/result/?q=penosil

@raymondosullivan1958 2 года назад

Is this suitable to use in a 10x8 feet shipping container?

@PenosilOfficial 2 года назад

Hello, EasySpray sprayable foam is a perfect product for insulating uneven and hard to reach surfaces such as shipping container walls. It adheres to all common construction materials, including to most metals.

@SaM-ub8ym 2 года назад

Where i can buy this spray expanding nozzlle gun ? Please provide buy link in your description

@PenosilOfficial 2 года назад

Hi, Penosil product selection varies from country to country. To be able to give you more information about the EasySpray Foam, please let us know from which country you are writing from.

@wolfgangdietrich4141 Год назад

Is everything great, only where do I get this spray gun with the attachment for surface spraying ?

@PenosilOfficial Год назад

Hi, please let us know which country you are writing from?

@wolfgangdietrich4141 Год назад

@@PenosilOfficial hi, thanks for their response, nice greetings from the Philippines, . Here a spray - foam insulation would be really important, There is everything here also spray guns , just no attachment for a surface sealing. If they can send me that I also take over the costs , thank you

@PenosilOfficial Год назад

Hi, thank you for your reply. Unfortunately, we do not sell any Penosil product in the Philippines at the moment. However, we would be glad to get the name of your local DIY shop / distributor where you normally would buy this type of product.

@ahmedsaleh6099 2 года назад

Do you have an agent in Egypt to get this amazing product

@PenosilOfficial 2 года назад

Unfortunately, for the time being we don’t sell EasySpray in Egypt. Sorry for the inconvenience!

@Levonsiio Год назад

Can someone please tell me where I can buy this Red Vertical Nozzle ?? I can't seem to find it anywhere 😕 Thank you in advance 🙏🏻

@PenosilOfficial Год назад

Hi, Penosil product selection varies from country to country. To be able to give you more information about the EasySpray Foam, please let us know from which country you are writing from.

@edismilic7683 2 года назад

Is this effect given by gun or this mixture in bottles

@PenosilOfficial 2 года назад

Special formula combined with spray applicator creates this unique foam structure.

@gringomam4088 2 года назад

Quiero comprar en Argentina. Donde lo hago o cómo hago para que me envíen?

@PenosilOfficial 2 года назад

Hola, lamentablemente no tenemos revendedores en Argentina en este momento. El distribuidor más cercano está en Chile.

@johnossendorf9979 3 года назад

Can this product be sprayed overhead to insulate joist bays ?

@PenosilOfficial 3 года назад

Yes, sprayable foam can be used insulating joist bays. As the product doesn´t have a special ceiling spray nozzle, then some foam flakes can fall.

@limitlesschoices Год назад

@@PenosilOfficial Is this product available in the US?

@PenosilOfficial Год назад

Hi, we are in the process of bringing this product to US market. Unfortunately, at the moment it is still not available in the United States.

@emanuelchavez8444 Год назад

Where can I even purchase this, I cannot even find this product on Amazon?

@PenosilOfficial Год назад

Hi, from which country are you writing from? In some countries Penosil products can be purchased directly from our e-shop.

@goransamardzija7068 Год назад

Super. Gdje ima za kupiti u rh.

@PenosilOfficial Год назад

Hi, yes, you should be able to buy this product in Croatia. Local Penosil reseller is: www.seles.hr/hr-hr/proizvodi/man8/penosil

@redrush40 3 года назад

Can you purchase in the United States?

@PenosilOfficial 3 года назад

PENOSIL brand is not available in retail in the United States yet, however, we sell directly. Contact us: info@wolfgroupweb.com

@anxietyhour 3 года назад

Where can I get the tip that goes on the hun?

@anxietyhour 3 года назад

Gun

@PenosilOfficial 3 года назад

The nozzle comes together with the product.

@itxasoarmendariz971 4 года назад

Hola,se puede aplicar en los techos o no???

@PenosilOfficial 3 года назад

Sí, Penosil Easyspray puede aplicarse en techos y en otras superfícies como tuberías, áticos,sótano, balcones… Es una espuma con un alto grado de aislamiento que ayuda a prevenir las condensaciones. Un saludo

@ryanfrederick4669 Год назад

Is this available in the USA?

@PenosilOfficial Год назад

Hi, unfortunately, at the moment it is still not available in the United States.

@trieshohib5330 3 года назад

Does it available in Indonesia?

@PenosilOfficial 3 года назад

PENOSIL brand is not available in retail in Indonesia yet, however, we sell directly. Contact us: info@wolfgroupweb.com

@johnnysinger3353 2 года назад

How do I get this in the US?

@PenosilOfficial 2 года назад

Hi, unfortunately for the time being we are not selling this product in the US.

@joekenjic2244 3 года назад

What’s the R-value?

@PenosilOfficial 3 года назад

The R-value depends on the foam layer thickness. Divide the layer thickness by the thermal conductivity, which is λ=0,033 W/(m*K)

@flod5d85 5 месяцев назад

This product has been around for a long time, do you have a distributor here in the Philippines?, many people are looking for this kind of polyurethane, it is more effective than fiber, rock wool and organic insulation!

@PenosilOfficial 5 месяцев назад

Hi, unfortunately we don't have a Penosil distributer in the Philippines.

@Cryptosifu 7 месяцев назад

What's the fire rating?

@PenosilOfficial 7 месяцев назад

Hi, the fire class of cured foam (DIN 4102-1) is B3.

@ectorsgranneh8168 3 года назад

That’s some fine liquid in a can

@PenosilOfficial 3 года назад

Thank-you Joseph Little, PENOSIL EasySpray Sprayable Insulation Foam is now live for purchases made online in UK via Sealfix.co.uk

@ectorsgranneh8168 3 года назад

@@PenosilOfficial that is extremely cool. I will make sure to purchase some of your sprayable solution right now.

@lucysands6635 3 года назад

@@ectorsgranneh8168 i must say that this product is groundbreaking! i recently purchased a can & it has changed my life! i now have made a whole jacuzzi made from this sprayable foam in a can!

@ectorsgranneh8168 3 года назад

@@lucysands6635 why my recent purchase of the liquid in a can, it has inspired me too make my own plane company. I will fly the globe and nobody can stop me because I have the power of PENOSIL OFFICIAL EASYSPRAY SPRAYABLE INSULATION FOAM on my side.

@lucysands6635 3 года назад

@@ectorsgranneh8168 oh my how exciting! well i do hope you the best with your travels! maybe i will see you soon as i’m planning on constructing an Lockheed AH-56 Cheyenne Attack helicopter from this! all the best!

@szymondziki4167 4 месяца назад

Hi what is the surface area 1 can will cover

@PenosilOfficial 4 месяца назад

Hi, the yield is 1 m2 per can when sprayed 2 cm (maximum) thick layer.

@szymondziki4167 4 месяца назад

Thank you so do you have a different type which covers more as I know the demsun p90 covers around 3m2 per can at 1.5cm thickness

@szymondziki4167 4 месяца назад

Just asking as I’ve ordered that but due to stock issue I’ve been offered your product instead which said it is a more superior brand but I’m just thinking about the coverage

@PenosilOfficial 4 месяца назад

Hi, of course if you apply a thinner layer, our product covers also more than 1m2. However, we can not promise a 3m2 coverage.

@sawlay6223 3 года назад

Where can i find this product?

@PenosilOfficial 3 года назад

In what country do you live? EasySpray is available in the Nordic, UK, Spain, France, etc.

@sawlay6223 3 года назад

@@PenosilOfficial usa

@PenosilOfficial 3 года назад

PENOSIL brand is not available in retail in the United States yet, however, we sell it directly. Contact us: info@wolfgroupweb.com

@fabianrivera7618 5 месяцев назад

Where to buy in USA

@PenosilOfficial 5 месяцев назад

Hi, please contact directly our country manager in the USA for more information: Wade.Rector@wolf-group.com

@fajar150 2 года назад

where can i buy this tool?

@PenosilOfficial 2 года назад

Hi, unfortunately we are not able to answer your question right away, as you have not written in which country do you live in. At the moment, Penosil is exported to more than 70 countries. You can find more information on our website: penosil.com

@fajar150 2 года назад

@@PenosilOfficial I live in Indonesia

@PenosilOfficial 2 года назад

Hi, unfortunately for the time being, we do not export Penosil products to Indonesia.

@ravishankarsingh9268 3 года назад

I from india. I want this product with spray gun. How I can

@PenosilOfficial 3 года назад

Unfortunately, PENOSIL sprayable foam is not available in India yet.

@ravishankarsingh9268 3 года назад

@@PenosilOfficial thanks for reply

@tunaortega3160 Год назад

Donde consigo las boquillas

@PenosilOfficial Год назад

Por favor, díganos desde qué país está escribiendo.

@tunaortega3160 Год назад

Cincinati oh usa

@PenosilOfficial Год назад

Hello, we are in the process of bringing this product to US market. Unfortunately, at the moment it is still not available in the States.

@pmcn1980 3 года назад

Was going to buy this can an red nozzle foam was £10 and postage was £14 so that was £24 and I live in the UK I did not buy

@PenosilOfficial 3 года назад

PENOSIL has a distributor in the UK. Contact them for better purchase options. penosil.com/uk/#whereToBuy

@claudiocrys 5 месяцев назад

Where can I buy the spray gun?

@PenosilOfficial 5 месяцев назад

Hi, the gun is a normal foam gun. EasySpray from comes with a special spray nozzle that you attach to the gun tip.

@claudiocrys 5 месяцев назад

@@PenosilOfficial do You have a link?

@PenosilOfficial 5 месяцев назад

Hi, you can find EasySpray 111 and our foam guns on penosil.com site.

@claudiocrys 5 месяцев назад

@@PenosilOfficial i cant find the product. Do You have a link?

@PenosilOfficial 5 месяцев назад

Hi, this is the EasyGun Foam 111 on our Global site: penosil.com/product/sprayable-gun-foam/. Depending on your country of residence, there might be a Penosil e-shop on your country page where you can buy this product directly.

@vinayprakash3685 2 года назад

Liquid milne ka Pata batay

@PenosilOfficial 2 года назад

Hi, unfortunately for the time being we are not selling this product in India.

@birguncite1188 3 года назад

It’s like snow when you’re panting

@chadsmith9218 2 года назад

This is not a closed cell foam you must have a 2 part system

@PenosilOfficial 2 года назад

Hello, this foam has 87% of open cells and 13% of closed cells.

@chadsmith9218 2 года назад

@@PenosilOfficial At 13% closed cell it should not be advertised as closed cell because it is not. 13% is nowhere close to being enough to have any insulation value unless it’s applied 5 to 6 inches thick. Your product in no different than the cheapest on the market today.

@PenosilOfficial Год назад

@Chad Smith Penosil EasySpray foam has R value 4,3 per inch. This is higher than the R value for e.g. rigid mineral wool, expanded polysterene, fiberglass batt, open cell 2-component foam. The biggest advantage of this foam is that it can be used for insulating places that are difficult to insulate with traditional insulation materials e.g. round, uneven surfaces etc.