Тёмный

Insert injection molding shore 50D urethane resin in two part silicone mold 

Eric Strebel
Подписаться 119 тыс.
Просмотров 21 тыс.
50% 1

PCBway 3D printing service: pcbway.com/g/S2UI8N
Never miss a video! Enable '🔔' All Notifications!
Insert molding a vibration sensor in a two part silicone mold with injection urethane made with 3D printed splitter board
Alfred Backpack hangers: botzen.com
Bambu Carbon X1 3D printer: tinyurl.com/35bn9v3y
FormLabs $500 machine 3D printer discount: tinyurl.com/427tjw96
BJB materials: bjbmaterials.com
3M 51056 Purple polish: amzn.to/3hp878w
Naphtha: amzn.to/46nruEQ
Petroleum Jelly: amzn.to/3QKeROv
Vibration Unit: amzn.to/3R6E475
Vacuum chamber and pump: amzn.to/47DslCC
5 Gal pressure tank: amzn.to/46gx4cc
10 Gal silent compressor: amzn.to/3sIVZHO
Quart mixing cups: amzn.to/47CG902
Tongue depressor mixing sticks: amzn.to/47EM8S5
Black dragon latex gloves: amzn.to/47lvSWf
Vinyl tubing: amzn.to/3SVUIHD
Rampf materials: www.rampf-group.com/en-us/
As an Amazon, Formlabs, Bambu, Creality, Blick Associate I earn from qualifying purchases.
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
Panasonic LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple Mac Studio: amzn.to/3sQ0kJ0
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro amzn.to/3PAFi7t
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
Follow me on:
BlueSky: at botzendesign.bsky.social
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

Хобби

Опубликовано:

 

12 фев 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@classicmetaldude
@classicmetaldude Месяц назад
ONE MORE VIDEO TO FUEL MY FUTURE PROJECTS...I get so much great info from watching these things...and it's all helped me to achieve some pretty serious items...I now have a silicone tarantula mold that I reproduce resin tarantulas from, as well as having made silicone molds of Ballet Flats for a client to make resin Ballet Flats for her customers...SO DANG COOL...I APPRECIATE YOUR WORK 🔥🔥🔥
@warnermcgee8856
@warnermcgee8856 3 месяца назад
Clean work! Thanks for dropping in the cost of a project like this. Insightful. Keep up the great work Eric!
@EricStrebel
@EricStrebel 3 месяца назад
Thanks
@bjbenterprises
@bjbenterprises 3 месяца назад
We like that stand you made for dealing with the bottom fill and tubing management. That can be a tricky configuration to hold and fill everything and not make a mess. Another good tutorial, Eric!
@EricStrebel
@EricStrebel 3 месяца назад
Thanks! And thanks for your continued support and excellent products
@sdunca4864
@sdunca4864 3 месяца назад
Appreciate the content as always! Bravo- would love to see the process of reverse engineering what urethane or moldable plastic to choose from "old" or obsolete parts... As always- be safe- and at peace!
@CharlesVanNoland
@CharlesVanNoland 3 месяца назад
I see the young man in you, Eric, who's curious about things and experimenting with stuff. This early Millennial recognizes you. Thanks for sharing! :]
@Zoie_Bowie
@Zoie_Bowie 3 месяца назад
What a beautiful thing to say! As his daughter, I agree ❤
@dcjelly
@dcjelly 3 месяца назад
Am I glad I found your channel! Am I am much less skilled tinkerer, but this stuff is exactly my speed :)
@InteractiveDNA
@InteractiveDNA 3 месяца назад
Very cool! I am only subscribed to a few channels and this is why I am to yours. There is a difference between a pro and wanted be. I stared to molding when I was 7 years old with friends, from oil cans we created a furnace that we melt all kind o of plastics that melts into the sand mold in the ground, we created difference products and parts that where better than the original.
@OwnTwoHands_
@OwnTwoHands_ 3 месяца назад
Nicely done Eric! Having the 3D model beforehand is blessing, speeds up the process tremendously. I'm battling with a project where I have to fit panel inside fairly complicated blowmolded case and the hours just fly.
@andyb7754
@andyb7754 3 месяца назад
Very, very interesting and informative video. Loved how it turned out. Thank you.
@drpipe
@drpipe 3 месяца назад
Really Enjoy These. Like the process your using, including 3d and resin real good use scenarios Thanks for posting
@garagemonkeysan
@garagemonkeysan 3 месяца назад
Nice video. Great job.❤
@EricStrebel
@EricStrebel 3 месяца назад
Thanks
@TheRonnylv
@TheRonnylv 3 месяца назад
Very interesting seeing that resin part to be used with platinum silicone right out of the printing process - is there any process that you follow to minimize silicone cure inhibition while using resin print?
@EricStrebel
@EricStrebel 3 месяца назад
Shellac works very well
@FranklyPeetoons
@FranklyPeetoons 3 месяца назад
Informative and entertaining as always. You frequently show methods I'd never have thought of in my hobby molding projects. The animation of text sliding up from the bottom of the screen is different! It used to have a little "hitch" in it that would make me stop breathing until it recovered and hit its mark.
@EricStrebel
@EricStrebel 3 месяца назад
Always making adjustments
@Jarom.M
@Jarom.M 3 месяца назад
Out of curiosity, when you say that it costs around $1000, is that your cost or your cost plus time spent (as in what you charge your customers)?
@SamAgro2024
@SamAgro2024 Месяц назад
Another excelling piece of art. Congrats. I am in the process of creating a hard mold either from epoxy or urethane resin that will be used to create small silicone parts. The silicone parts will have many small holes (1mm diameter) in it and I am wondering if the 1mm diameter molded pillars in epoxy or urethane will be strong enough to not break while demolding the silicone parts. What hardness do you recommend for such a mold?
@EricStrebel
@EricStrebel Месяц назад
I would not use anything above a shore 40
@SamAgro2024
@SamAgro2024 Месяц назад
@@EricStrebel Thanks. Also, can i mix PTFE nanopowder in urethane as a permanent easy release? I cant use standard mold release coatings like vaseline or other additives due to the application sensitivity.
@EricStrebel
@EricStrebel Месяц назад
Hmmmm, not sure, test it out and see how it works. Let me know.
@kmpnelson
@kmpnelson 3 месяца назад
Would love to see over moulding in small batches
@AndrewHelgeCox
@AndrewHelgeCox 3 месяца назад
Is the syringe a consumable of the process or can you clean that up to reuse?
@EricStrebel
@EricStrebel 3 месяца назад
Reusable 😀
@AndrewHelgeCox
@AndrewHelgeCox 3 месяца назад
@@EricStrebel I can't work out if you are laughing at the absurdity of the idea that it would be reusable or if it just plainly is reusable. I'll look it up!
@EricStrebel
@EricStrebel 3 месяца назад
It's very reusable
@alexandremasse9562
@alexandremasse9562 3 месяца назад
No joke, you blow some compressed air in the nozzle side of the syringe and it pops right out. And sometimes across the room too!
@EricStrebel
@EricStrebel 3 месяца назад
Yup
@JOE_GOMEZ777
@JOE_GOMEZ777 2 месяца назад
AWSOME work 👏 👌
@anthonyg4671
@anthonyg4671 3 месяца назад
I think you need a small injection moulder tbh.
@eackerw85
@eackerw85 3 месяца назад
I've loved your videos for years now, thanks for adding in cost. How did you get into doing this line of work?
@EricStrebel
@EricStrebel 3 месяца назад
This part of what Industrial Designers do.
@MordecaiV
@MordecaiV 3 месяца назад
Thanks for sharing! Great project. If you weren't filming, besides the tin cure, would you have solid sides for the mold support to help limit the flash?
@EricStrebel
@EricStrebel 3 месяца назад
Maybe just additional key lock on the edges
@MordecaiV
@MordecaiV 3 месяца назад
@@EricStrebel I guess you could throw that into the 3d printed midplate. Easy!
@EricStrebel
@EricStrebel 3 месяца назад
Correct
@StasonKalbason
@StasonKalbason 3 месяца назад
Молодцом!
@910rudebwoi
@910rudebwoi 3 месяца назад
Does pcbway do polyurethane as well? If not do you know of a company that does polyurethane molding or printing?
@joshedwards6205
@joshedwards6205 3 месяца назад
For such a small mold would it be possible to pour the silicone and then place the whole mold into the degassing chamber? Or are their other reasons that wouldn't be a good idea?
@BEdmonson85
@BEdmonson85 3 месяца назад
I tried that once on a project I was working on. Half of the silicone ended up in the bottom of my vacuum chamber. Had to redo the mold. It was a mess. Lesson learned.
@colossalbigfoot256
@colossalbigfoot256 3 месяца назад
What is this vibration sensor for?
@EricStrebel
@EricStrebel 3 месяца назад
Secret
@hannesaltenfelder4302
@hannesaltenfelder4302 3 месяца назад
💪👍
@mattmeyer6471
@mattmeyer6471 3 месяца назад
Is that a challenge coin......
@0newingedcrow
@0newingedcrow Месяц назад
When you say a project like this runs about $1000 are you talking about how much you charge, or how much the materials cost you to make this parts?
@EricStrebel
@EricStrebel Месяц назад
What I charge
@0newingedcrow
@0newingedcrow Месяц назад
@@EricStrebel got it, thanks again!
@bobweiram6321
@bobweiram6321 3 месяца назад
Have you considered hot glue instead of PVA? Hot glue is ridiculously easy to remove with a spritz of alcohol.
@EricStrebel
@EricStrebel 3 месяца назад
not an option, to thick and not easy to control.
@DisgruntledPigumon
@DisgruntledPigumon 3 месяца назад
So cool. This is a really great process. I have to say though, $500 OFF a Formlabs, when you can get printers that produce far better surface quality for LESS than $500… 🤔
@EricStrebel
@EricStrebel 3 месяца назад
Not likely
@therationalanarchist
@therationalanarchist 3 месяца назад
It cost you $1000 to do this? I think there are several other techniques you could have chosen for less.
@Carrot-3H
@Carrot-3H 3 месяца назад
I think he charged 1k for the job.
@sauceless6666
@sauceless6666 3 месяца назад
damn 1k is a ripoff lol
@EricStrebel
@EricStrebel 3 месяца назад
Absolutely, you're right. , I should change more.
@davidvdbergen
@davidvdbergen 3 месяца назад
WOW! That top part looked awful out of the printer. You should not have to do so much rework if your printer settings are good, you should get a nearly smooth part right out of the printer. This looked horrible!
@EricStrebel
@EricStrebel 3 месяца назад
Yes, the heater is broken on my form 2, failed print parts in the resin, causes print issues
@getdirecti0ns
@getdirecti0ns 3 месяца назад
Right? It looked like a bad FDM print not resin. If Form is giving him discount codes to pass out they should send him a fully dialed in printer.
@EricStrebel
@EricStrebel 3 месяца назад
The form 2 is an older machine, the form3+ is the new machine.
@BUY_YOUTUB_VIEWS.82
@BUY_YOUTUB_VIEWS.82 3 месяца назад
Great delivery and insights!
@GeorgeGraves
@GeorgeGraves 3 месяца назад
(2:38) Man, you have the worst luck with 3d printing. Those parts look....how do I say this nicely...well, I guess I won't say anything. But it's bad man. That's really bad.
@EricStrebel
@EricStrebel 3 месяца назад
Eh, some bits in the resin from a failed print, not an issue for that part.
@GeorgeGraves
@GeorgeGraves 3 месяца назад
@@EricStrebel I was speaking to the over all quality. Is your form 2 heated?
@EricStrebel
@EricStrebel 3 месяца назад
The heater has failed in the form 2....it's an issue I have to deal with.
Далее
Molding a Silicone Container
12:11
Просмотров 11 тыс.
The delivery rescued them
00:52
Просмотров 1,1 млн
skibidi toilet multiverse Special Episode 02
07:37
Просмотров 2,5 млн
😭
00:50
Просмотров 17 млн
Casting Polyurethane: Resin Fundamentals
12:03
Просмотров 41 тыс.
Making Silicone Parts with Laser Cut Acrylic Molds
14:18
DIY Manufacturing Process Using RTV Silicone
8:41
Просмотров 72 тыс.
Resin Casting Lancia Brake Lights
21:17
Просмотров 17 тыс.
Epoxy vs Urethane Casting Resin
15:08
Просмотров 74 тыс.
Casting Aluminum for the Home from a Simple 3D Print
11:13