Install your TV on the Wall - Learn from a Pro

Подписаться 215 тыс.

Просмотров 328 тыс.

50% 1

Installing your TV on a wall doesn't have to be an impossible task. With a little guidance, anyone can do it. Learn how to select a good wall location, pick the best TV mount, which tools to use and then 4 easy steps to complete the TV installation. #sponsored #tvinstall
Get 20% OFF @manscaped + Free Shipping with promo code INSTALLER at www.MANSCAPED.com
Make sure to follow me on
Instagram - / b_the_installer
Twitter - / b_installer
Pass The Remote Streaming Channel - / passtheremotes
Get Local Installations in San Diego ONLY or sign up for newsletter @
www.socalinstalls.com
TOP TVS to Consider
Sony A90J
Best Buy - geni.us/oxNCZEA
Amazon - geni.us/amA90J
Sony A80J
Best Buy - geni.us/A80J
Amazon - geni.us/amA80J
LG C1
Best Buy - geni.us/LGC1
Amazon - geni.us/amLGC1
LG G1
Best Buy - geni.us/LGG1
Amazon - geni.us/amLGG1
Sony X95J
Best Buy - geni.us/X95J
Amazon - geni.us/X95Jam
Sony X90J
Best Buy - geni.us/X90J
Amazon - geni.us/amX90J
Samsung QN90A
Best Buy - geni.us/QN90A
Amazon - geni.us/gaVB [Amazon]
TCL R646
Best Buy - geni.us/tclr646
Hisense U6G
Best Buy - geni.us/hisenseu6g
Amazon - geni.us/amu6g
BIAS LIGHTING
GoVee Reacting TV LED lights with app - geni.us/JxnGl [Amazon]
Cheap set - limited control but nice - geni.us/BbI9Q5 [Amazon]
TV MOUNTS
Simple Perlesmith PSMTK1 Flat TV mount geni.us/JezrE17 [Amazon]
Best Tilt TV Mount $4$ - Everstone WLT103M-ES - geni.us/16AwwO [Amazon]
Best Single Stud TV Mount - Perlesmith PSMFK1 - geni.us/oNoWL9 [Amazon]
Most Versatile Full Motion TV Mount Mounting Dream MD2380 - geni.us/SqxUkb [Amazon]
Large Full Motion TV Mount - Mounting Dream MD2198 - geni.us/VJEXQ [Amazon]
Alt Large Full Motion TV Mount - Echogear EGLF2-BK - geni.us/v0d7uAZ [Amazon]
Mantel Mount MM340 w/o soundbar holder -
geni.us/pOTaENA [Amazon]
Best Mantel Mount MM540 w/sound bar holder - geni.us/kfxc [Amazon]
Mesh WIFI
Netgear Orbi (see renewed price middle of page) geni.us/zzE40 [Amazon]
Amazon Eero Wifi 6 - geni.us/n9gmeVA [Amazon]
Amazon Eero Pro Wifi 6 geni.us/nMJc [Amazon]
Linksys Velop geni.us/FswYd8 [Amazon]
Linksys Velop Wifi 6 geni.us/AAfrPU [Amazon]
TP Link M5 Deco geni.us/jVN19 [Amazon]
My Gear
Camera Sony A6400 geni.us/Q8KJLY5 [Amazon]
Stabilizer geni.us/xn6Rd [Amazon]
Lights geni.us/A6y6aO [Amazon]
Tripod geni.us/IrDGr7o [Amazon]
Sigma 30mm geni.us/8mkn0MX [Amazon]
0:00 Intro/ Manscaped.com
1:27 Step 1 - Prep - Location - Mount - Tools
2:41 TV Mount Selection
4:31 Tools for the Job
6:38 Step 2 - Put Brackets on TV
10:09 Step 3 - TV Mount on the Wall
19:33 Step 4 - Hang TV w/HELP...
21:18 Step 5 - Wire Management & Tips

Наука

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 216

@BTheInstaller 2 года назад

Get 20% OFF @manscaped + Free Shipping with promo code INSTALLER at www.MANSCAPED.com

@ANTIQUELEGEND82 2 года назад

Off topic, but any idea why there is a new firmware update for the LG CX models and another on the way? 04.30.35 & 04.30.40? Any idea on differences between them? Saw some people having issues with Simplink for 04.30.10. Im still on 03.21.18.

@michael-4k4000 Год назад

Thanks B, this was awesome!

@brianalexander7360 5 месяцев назад

Finely a man who explained how to measure the bracket on the TV, and add it to your wall number, in a way a numpty like me can understand lol..Feeling pretty confident now i can manage it, doing it for a friend on Boxing day...Many Thanks mate

@magarciaz20 Год назад

I am definitely not a handy man by any stretch, but following this video, I was able to mount my first tv. Thank you!

@jerrymontalbano3222 2 года назад

As usual, it's a nice, clean installation that's easy to follow, and works great in application. Thanks, B.

@kpv123 Год назад

This is Michael. Thank you for such an informative and instructional video. A lot of people make videos and Skip steps taking things for granted, but your videos are perfect. Thanks

@Cenkolino 2 месяца назад

Best installer on youtube. Always gives great trips.

@kevinvitale8980 2 года назад

Cool tip about finding the center of the stud even better. Thanks. Oh, love the dust bin tip to catch dust. Appreciate the video.

@goruby2 Год назад

If the studs are off a little to far, you could take a nice piece of 1x material about 24 "s long and screw that firmly into the studs. the TV mount could be positioned in the center of the wall and screwed to that.

@DavidMannings 2 года назад

Love your work. Very very helpful.

@Channel-td4cp 2 года назад

thanks for making an overwhelming task simple!

@fortyfourrobo544 3 месяца назад

Excellent dude! Thank you for taking the time. I don’t know why it scares me, but you made it make sense! Thank you!

@ashman0071 2 года назад

SOLID that you mention to hand tighten everything so you don't strip things. The small drill left / right is very clever to 'really' find the center of the stud. You might suggest what the common heights of dressers are so that if you have family photos or a 't*ts' old school tube channel audio system that's going to sit on top of it, the dimensions are 36 " to the top of your dresser in your bedroom so 46 " to the bottom edge of your TV from the floor works usually Holmes. Great channel .

@IamwhatIsayIam Месяц назад

Great Video! Very easy to follow

@VegasVaron Год назад

Helpful video, thanks.

@rbs427 2 года назад

Great detailed video. I do what you do and I prefer the Sanus mounts because they are wider than 16 inches and gives more side to side leeway and allows you to install on 24 inch spaced studs. Rare but I have run into it. Also, I find Sanus to be easier to install. Live your vids

@vickiyoung5651 2 года назад

love your video, would like my tv on the wall, still don't feel confident to do it

@cdemosshouston 2 года назад

B - thanks to you, I have now I installed three wall mount tv’s in my house and not one cord is visible. Probably saved at least a $1,000 doing it myself and I actually had a lot of fun doing it. Your explanations are spot-on. Sure appreciate you putting up these videos.

@BTheInstaller 2 года назад

Awesome. Spread the word. Haha

@elizabethpeters4927 Год назад

Thank you so much excellent. One more thing I would have found helpful is that Samsung uses m8 28-30 I had to go buy these as the mountain dream though an excellent mount does not supply them in their pack.

@bryanalfonso8049 2 месяца назад

Great video!

@dougmoore224 Год назад

Hmmmm....Good job explaining how to find right level for mount....excellent video....

@cjarciolaiii3680 2 года назад

Excellent video with some helpful hints. Like the bracket you used. Watch your videos all the time. Now...all I need to do is decide between 77" LG or Sony which I'm been trying to do for over a month. All I've own are LG oleds so that's part of the problem.

@BTheInstaller 2 года назад

Can't really lose. Just stay C1 if you like LG

@willhelljacobson7193 2 года назад

Great tips B, am gonna install my brand new TV by myself, and could hide the wires easy

@BTheInstaller 2 года назад

Made some videos for that too. Not quite as easy but doable for sure.

@vintage5532 Год назад

I've seen a couple of your videos and it's always a nice clean job. You also seem like a nice guy. Just one thing I would say is you'll never sheer the head off something so thick so I wouldn't worry about that in your future installations. Keep up the good work buddy.

@skwerlee 2 года назад

Great job

@albertmyers7176 2 года назад

B great vid thank you

@AlexTheLi0n 2 года назад

The one video that we have all been waiting for 😜

@mikegee8595 2 месяца назад

Thanks man

@dginta7932 Год назад

That mount says for TV’s up to 55”. Why does it work on that larger TV you installed? Or is is because you are under the 99 lb weight capacity of the mount? Great video, thanks.

@Currygoatpapi Год назад

Do you have to have the tv already because I only have the mount

@chrisblasi5877 2 года назад

Great Video...how do u know how high to mount a TV wall mount ? My TV size will either be a 43 in or 50 in . Is there a certain measurement u use.

@alidemirtas6249 4 месяца назад

Thank you for the video. It is really useful to understant what to do. I just bought the LG C3, I want to do wall mount but not on a wall, it will be on some wood(decoration purposes to close the window) this wood piece will be mounted on the wall tho from the corners. I would like to mount the wood piece first on the wall, then just want to install the wall mount the TV when it arrives. What kind of wall mount should I use?

@cubanderasyeha 4 месяца назад

Great video! Thanks! One question, though, how can I tell the max weight of a TV that the studs will be able to hold? Can drywall hold a 75in TV? Thank you!

@MyGadgetsWorld 2 года назад

Amazing Video Brandon! I Just did my QN90A 65" install , I have bruises on my hands now lol 😆

@BTheInstaller 2 года назад

Ha, yeah.. that will happen after some install work. 💪

@davidfranco4773 2 года назад

Hey B great intel! Do you think is ok to use 4 of these new cavity fixings for heavy itemd (GeeFix) as my drywall is like 10in depth) and studs were likely put at back so also bolts won't be long enough thanks x advice

@Thereal_tuti Год назад

Very helpful

@quantoorelax 2 года назад

Great video. Definitely subscribe

@michaelwyckoff7593 2 года назад

You are the man B the installer now you are reviewing manly products. It will take some time before we can become a TV installer like you bro. You've been doing installs for a lengthy amount of time and that's why you are a PRO.

@BTheInstaller 2 года назад

Yeah I thought this would be a 10 min video. I talk a lot. 😆

@craigosterberg5045 2 года назад

Thanks for the video

@BTheInstaller 2 года назад

Thanks for checking it out.

@Dexter.Morales 2 года назад

Just picked up a MD mount for my PC monitor.

@davidtoney9933 11 месяцев назад

Just what I needed ....and from one of my favorite actors Kurt Russell no less!!! (#justkidding .. Thanks!)

@jaqenhghar7302 7 месяцев назад

Huge fan, ❤ love your videos. I really could use your help as the pro you are. I have been advised against wall mounting our 50” tv in our condo because of “metal studs”. I have been told you can never be sure you have actually penetrated the metal studs or just bent them. This is an old tv, 50” plasma so it’s very heavy and rather thick, compared to newer tv’s. It is probably over 100 lbs. So I am reluctant to try this. We did have it wall mounted in our old house since getting it new in 2007. But in this condo, this is a very small bedroom so having the tv on the wall is the only option. Have you ever run into this problem ? Any body else have any advice ?

@paulcarlin5181 6 месяцев назад

I would just get a TV stand. I think that is the route we are going to go.

@jarold74 3 месяца назад

At first i thought you were standing til i found out in the end you were kneeling. Hahaha 😂 anyway thanks for the guide! Very helpful

@dannyumana143 3 месяца назад

I couldn't get centered for the living room where i needed to mount wall brackets to center TV. I used flip Toggler anchors on drywall. They are rated at 137lb per toggler. I used four togglers for a full motion mout for a 77-inch OLED. Do you think I'll be okay?

@reviewforthetube6485 2 года назад

B YOU ARE TRUELY THE INSTALLER LOL great video I'm sure it helps a good bit of people out.

@BTheInstaller 2 года назад

I hope so. Thanks.

@reviewforthetube6485 2 года назад

@@BTheInstaller hey dude try out what I told you man it's pretty cool. With external sources if you go down to the video signal. Where the color space settings are at. Right above that setting is the hdmi signal output change it from limited to full. The image will be slightly richer and have a bit more perceived contrast imo. I'm sure you will enjoy that lol. On the a90j of course I'm talking about.

@rawmark 2 года назад

I like the mount from harbor freight. That mount is heavy, and rock solid!

@BTheInstaller 2 года назад

I don't know those but im sure they're a great value as most products there

@MyGuyKirby 2 года назад

Very basic steps so will use these on my new TV . Next is to decided on mount brand to use. Hey nice to see you complete the ad, guess it took you several takes to make that one.

@BTheInstaller 2 года назад

I made a "best tv mount" video. Back in spring. Ad took an hour or two to make. Was fun.

@briancathyturner6116 Год назад

I notice the tape lights on the back of the TV, did that come from the manufacturer or was that an after market add on? If that was an add on, would there be any way of doing a How To video on something of that nature? Thx

@happyguardian2000 2 года назад

easiest video i found that explains where to put the mount on the wall

@jzm6403 Год назад

Before mounting, I thought ahead and did NOT remove the factory stand until it was mounted to the wall. Absolutely no need to do this with this wall mount until I had the TV where I wanted it. This mount swings out plenty to remove the factory stand afterwards. I mounted my 65" much the same and used the same brand. I used tape on the wall once I found the center and the studs so as not to mark up the wall. I also used this same method of centering the 2x4. I have 2 stud finders. One has lights that tell me when the 2x4 is there (not super accurate but works) and a magnet stud finder. I use a small nail on a vice grip to center the line for the stud once I find it. The only thing I don't like is the typical 42" TV center (from the floor) that seems to be standard. This just isn't high enough for me. I put mine at 48" from the floor and it still wasn't high enough. The rear TV bracket only allows for about 4" of adjustment up and down. When I first mounted it to the recommended center from the floor (but 48" not 42"), it was almost identical height as when it was on the TV stand. I then removed it and raised the rear mount 4" higher. STILL not high enough. For me, a 60" center is where my 65" belongs. I can now lower it 4" for the perfect height of 56" from the floor. With the 5-degree tip feature, this is perfection.

@sdtvmounts7955 2 года назад

I love it 😍

@marcozubieta2068 2 года назад

HI B! I just purchase a 65 gx oled and cannot get the stand so my only chance is to install it on the wall, but I would like to have a stand DIY or adapt some other.. Insights??

@Yoser0405 2 года назад

Recently installed the SU-WL855 along with the 65A80J. I had to move my outlet didn't lineup right where the old wall mount was. Ran just two HDMI cables in the wall for and Nvidia-SHIELD and Sonos Arc. Able to hit two studs with the adjustments of the wall plate. Also hung a the 65 Frame. Had to make extra holes too low initially, bummer. No studs just wall anchors. Thinking about painting a short strip of making tape and laying it over the One Connect cable just to see how it looks.

@BTheInstaller 2 года назад

Good job. I will be making a frame install video to show that wire isn't a big deal externally

@227lion Год назад

I'm trying to hang a 75inch and because of my stud spacing its not mounting centered. Can I make a 2X4 bracket for the top and bottom and then attach the mount?

@JohnDundee-el2ro Месяц назад

Put a socket in just under or behind the TV it's easy

@MyGuyKirby 2 года назад

Your link to the Motion Dream 2198 goes to the 2296, is this the recommended unit you suggest?

@chrisnelson3470 2 года назад

Great video. Looking at a 70” q60. Any recommendations for a full or partial motion mount with the mounting stud located dead center? And 16” on center. Thanks

@BTheInstaller 2 года назад

I made a video on that. Best tv mounts.

@WetSpotatBRC Год назад

When picking my TV's height off the floor I realized that the recommended "eye level" suggestions from the internet made the view from the kitchen of the bottom of the screen blocked by the "eye level" heads of people sitting on the couch. I stuck an above average height person on the couch, went into the kitchen and sighted just above thier head to the wall where the TV was going to mount, and that's how I picked the bottom of my screen. Moral of the story is to consider all possible viewing locations before installing blocking and/or drilling holes.

@stevetech1949 Год назад

I'm seeing some nasty glare on my 10 year old 50" LG Plasma TV and will wall mount and tilt down to help w/ that. Thank you! P.S. I would LOVE to replace it w/ a new 65" TV now, but the cheapest one I would consider costs about a grand now.

@kingstring23 2 года назад

Great video man! I just got a 77” A80J and I’m thinking about mounting it in the future. The only wall it would fit on in my living room has metal studs since I live in a condo. Any advice for that? Is it even possible/safe with a TV that size? I’ve seen other videos using toggle bolts and/or plywood to distribute the weight but I’m still uncertain. Thanks!

@BTheInstaller 2 года назад

Yes you can mount on 2 metal studs with the 3/16 or 1/4" toggles through the stud. It takes an understanding. I made a video, look for "dual A9G oled install" in an office. It was from early 2021

@kingstring23 2 года назад

@@BTheInstaller sweet!! Appreciate it!

@JebusJones 2 года назад

Are you me? I think you might be me. I'm in the exact same position. The contractor the store uses for TV installs refused to mount my TV because I have metal studs and want it to be angled out a bit.

@Fnuffkitty Год назад

Hi, where does the outside aerial plug in please? can this be hidden too?

@Gud2B_Blessed 5 месяцев назад

Hello Sir. Can you do video mounting the new Samsung that rotates on the wall? How to properly mount it? Thanks

@barryomahony4983 2 года назад

Most important thing said: 19:45 "I have liability insurance". Sure wish I could find someone local to hang my TV in a timely manner. I'd easily pay them a few $100 and let them take the responsibility of dropping the TV or pinching/cracking the OLED panel. But they're not available. I'm nervous as hell.

@Dreadpirateflappy 2 года назад

not the only one, I got quoted £500 (around $700) which was just insane for just lifting it off my desk and mounting it on the wall directly behind. Want to do it myself, but the screen is so thin.

@ghstbstr 2 года назад

Yeah you're right anyone can install their own tv it's just one(or two, because technically there's two) simple step. You put both feet on bottom of tv and screw them in if necessary, and just like that you're done. Easy peasy nice and easy. 😉

@BTheInstaller 2 года назад

I love it... nice work. 3rd step.. have a beer and watch TV. ✌

@user-nh3gu1ge3d 2 года назад

But then it's on the floor. Or you gotta buy a piece of furniture. Easier to mount it to the wall for the cost of a 50 dollar mount.

@Dreadpirateflappy 2 года назад

and then it takes up a lot more space and is far less stable.

@mberki 2 года назад

Nice video! I will use it when Im gona hang TV. Any tips for packing the TV for moving? I have the original box. Help appreciated ;)

@BTheInstaller 2 года назад

If you have the box, you're set. Just reverse unbox it. And then use packing tape. They also sell boxes for tvs as home depot woth padding.

@alexvaldez8304 2 года назад

Do you know what led lighting strip you used on the back of that tv? It looks so clean.

@BTheInstaller 2 года назад

In the description. Bias lighting --> cheap set

@RomboutVersluijs 3 месяца назад

I thino that even with a single stud, using a wide bracket. Will guide lots of the force on the edges when you move the tv. That's actually better vs a borrow single arm connection. Though I did just buy a single arm. I read it's easier with use case. I also have a concrete wall, so it's sturdy and tight

@RomboutVersluijs 3 месяца назад

One doen side on the Xtreme single arm mount I got. It's of center, t didn't noticed that untill I got it. I need to keep that in mind

@jaggedice894 Год назад

Need this step by step for the LG G2 specifically. The gallery tv mount is annoying.

@MusikLover8 3 месяца назад

how to pick a Samsung 65 in Wall Mount? I'm moving to a much smaller apt from where I live now so I want to mount my tv because I''ll need every space every space I can get. So what you suggest? Also I'm moving into APT that has metal and concrete bldg. What's your best suggestion for mounts, I dont want something that extends from wall too far. But I also don't want to have any trouble with bright lights and viewing angles either. In addition my mom after dying from Covid I took her old 43 in lg while I was waiting to replace my old lg 50 inch that I loved but fuse went after 10 yrs of ownership. So what do you suggest there too? thx.

@markrobinson8539 2 месяца назад

I went with the Sanus VLF728-B2 in black. It is pretty much top of the line but I am sure that there are lots of good cheaper mounts out there.

@bigjohnwong 2 года назад

Sir B... You have the best reviews in all, thank you. I just pick up my XR77AJ80 from BF, after your reviews and now planning to mount it on wall. My TV cabinet is 25 inch height, I want a 8-10 inch distance from the cabinet to the bottom of the TV. That means the center of the TV to the ground is 54~ inch. With my sofa is 10~12 ft away from screen, should I be concerned with the optimum viewing angle? As I was told the best height to be 42 inch to center of screen when sitting for best eye leveling. Any comments, thanks!

@13NZR13 2 года назад

I’m in the same situation. It should be fine but still concerned it will be too high.

@markvanyo4302 2 года назад

This advice may be a little late but Big John having the center of the TV to the ground at 54-inches sounds way too high. I have the dead center of my 50-inch TV at 41 inches above the ground because when I sit on my leather couch my eyeballs are about 40 inches above the ground. I sit 11-feet away from the TV. And when searching online it's recommended I get a 70-inch to 90-inch TV if it's going to be 4k. Time for me to look for a bigger TV. Hope this helps.

@bigjohnwong 2 года назад

@@markvanyo4302 yes, I eventually managed to do 44inch center to ground. So far so good. Thank you anyway 👍

@cestgum7672 Год назад

are no stud mounts safe?

@rick330 2 года назад

This video is amazing. My only concern after watching is overtightening because I have two layers of drywall equalling an inch and I want to be sure the bolt is in enough of the wood stud.

@BTheInstaller 2 года назад

Just use 4 inch bolts. Plenty in wall.

@rick330 2 года назад

@@BTheInstaller thanks buddy. Then with the ratchet just turn until it's firm as shown in the video?

@BTheInstaller 2 года назад

Yeah, once the mount starts sucking into the wall... stop... 😆 4 bolts, it's not going anywhere.

@davidoziel105 2 года назад

What's your take on X mounts so you don't have the back brackets on rhe TV are hidden. I was looking at the Barkan mount for my new LG C1. thoughts?

@BTheInstaller 2 года назад

The mount I used is stronger has more adjustability.

@ignaciorivas4712 2 года назад

What do you think about Costco‘s amount Kanto 40" - 90" Full-Motion TV Mount Item 657260 Model FMX3

@michaelgriffiths6584 2 года назад

First class.

@jihoffman27 2 года назад

I’m debating between buying a 65” and a 77” OLED. Still debating whether to mount on the wall or on a stand. Seating positions in the room vary from about 110” to 140”. Closest seating is about 88”. Would love any opinion or thoughts on which size to get. Based on the formulas I can online find I’m sort of on the line between the two.

@BTheInstaller 2 года назад

Most would recommend the 77. If the wall and the space can hold it. Prices are quite low for those. I paid 4k for 65" a90j so it's all relative. I wish I had the 77 a80j in bedroom now. Could also save $1k

@jihoffman27 2 года назад

@@BTheInstaller Thanks. I'm probably going with the a80j based on your review - I'm more of a tv and sports watcher than a gamer. The wall can definitely hold it and there is plenty of space. It just kinda "feels" big, but that's probably because I'm comparing it to my current 60" plasma. I guess nobody ever said, "gee, I wish I got the smaller TV."

@michael-4k4000 Год назад

Buy last years model, there are so few changes per year, unless your buying the new flagship which usually offer some new features, but its still not worth it. Always best to pay as little as possible and then upgrade in 5 years.

@paulcarlin5181 6 месяцев назад

That is our plan. We are going to ride our soon to be delivered 75 inch Hisense U8K until it gives out. Which means we will def be getting a new one within 5 years lol@@michael-4k4000

@MeMyselfI_69 2 года назад

That's for the tips. A bit low especially when seeing the PS5 and XBOX SX sitting there.

@BTheInstaller 2 года назад

That was just for the pic and the boxes hid the wires.. camera games. The tv is perfect.

@keithzastrow 2 года назад

I see your list of tv mounts but which one would you recommend the most for a Samsung QN90a 85" size?

@BTheInstaller 2 года назад

You can get that larger Echogear one or the larger mounting Dream one. If you need turning ability. Or either Costco Mount would also be fine.

@ASRmann 2 года назад

Hi B, You dont seem to tighten the screws holding the bracket into the wall very tight? Is there a reason for this? Installed a heavy 60kg 85’’ TV into breezeblock (through a small gap in plaster board) and I am a little concerned I didnt tighten the bolts enough. I was concerned by the potential of threading the bolts so snugged them up with a rachet but did not apply any torque/force. Your input would be hugely appreciated

@BTheInstaller 2 года назад

I hand tighten until it just starts to bend drywall/mount. They are in studs not the drywall. The studs hold the bolts still

@ASRmann 2 года назад

@@BTheInstaller thanks man. Great videos by the way. Subbed 👌🏽

@barryomahony4983 2 года назад

I was installing a 3-stud mount for my TV today and hit a drywall screw on the second hole. Any suggestions as to best practices? I moved the hole about 1/4" to the left; I figured if one of the 6 lag bolts wasn't perfectly centered in the stud it was NBD. The mount is rated for 175 lbs. but the TV is only 96 lbs.

@BTheInstaller 2 года назад

Just remove the drywall screw and same spot. I've just moved to the aide many times. Not being there, it sounds like it's still overkill.

@barryomahony4983 2 года назад

@@BTheInstaller Glad to hear you think it's overkill. Will have some strong help here tomorrow to actually put the TV on the mount and a little nervous about it. I'd rather hire a pro to do it but around here they're all booked up for the next several weeks.

@barryomahony4983 2 года назад

@@BTheInstaller I got my 83" A90J mounted on the wall today, with help from my adult kids. Went pretty smoothly, thanks in large part to your videos. Thanks so much. Glad it's over and I don't have to worry about it anymore.

@shawnpahotabie7719 2 года назад

Quick question. I have tv cabinet made from mahogany and i wanted to drill that for the mount. Will it be good enough to hold a 55 inch lg oled?

@BTheInstaller 2 года назад

Not sure I follow.

@ivoryrandolph5938 2 года назад

Hello - Do you perform home installations (TV wall mounting) near Temecula, CA?

@BTheInstaller 2 года назад

I don't do many installs at all now. I try to get to more local jobs to SD. There are others out there.

@user-tf2fc6iu5j 5 месяцев назад

Let’s get a tool bag tour

@xOzymandias Год назад

B where the heck did you put your PS5 stand . Use it for better airflow

@jesusbaez4427 2 года назад

Great Video B, what Torque settings was on you drill?

@BTheInstaller 2 года назад

I have it set on top speed and torque. I can always let go of trigger.

@jesusbaez4427 2 года назад

@@BTheInstaller thank's and Happy Thanksgiving to you and your family.

@BTheInstaller 2 года назад

Likewise. 🦃🙏

@RomboutVersluijs 3 месяца назад

@14:50 kinda feels that's stud finder is not that accurate. I'm fome eurooe snd we don't have studs. How wide is a default stud actually

@powerflex500 Год назад

Before drilling the holes for the wall mount, how to determine if the studs are wood or aluminum? If the studs are aluminum, should you wall mount the TV?

@BTheInstaller Год назад

If wood comes out, it's wood. If the drill doesn't go anywhere or makes a banging noise, it could be metal. Normally about 20% of the time. You can use toggle bolts through metal studs and they work quite well. You need to understand how to use them properly and the weight of tv

@powerflex500 Год назад

Yes. Definitely understand. Thank you for the quick repsonse. You are a very gifted installer I must say.

@powerflex500 Год назад

@@BTheInstaller The only thing I don't like about the toggle bolts is that the heavier rated toggle butterfly end are so huge, you have to drill a bigger hole just to get it through and the metal studs are not that wide.

@richelmquist4951 2 года назад

Mr. B where can I find the "light tape" using a USB socket attached behind the screen?

@BTheInstaller 2 года назад

I think it's in my description. Cheap LED lights for behind your TV. The patington ones are good for 12 bucks.

@rustyquad513 Год назад

Seems I cannot find answer about the screw lengths anywhere…I’m hanging a Samsung 75” with fixed wall mount and they supplied the #8 screws but in two different lengths to hold onto the vertical bar into rear tv. The short ones just don’t seem right to hold up the weight and the longer ones seem too long to screw into rear of tv. Anyone have experience with Samsung mountings…thanks very much for any response 👍

@ZonaDeluxeOficial 2 года назад

I’m just confused about the wall, how can I know what kind of wall do I have? I can see that wall had “wood separation” between the panels but i think my wall has the metallic parts, not sure, how can I know?

@jungleviper Год назад

You need a good stud finder.

@RomboutVersluijs 3 месяца назад

I always see you drilling by hand to complete dept. Why don't you mark the drill with a tape for correct dept. I mean if you drill to deep, not sure how deep the studs are, but you could drill straight through

@rayland8553 5 месяцев назад

Sam is 🔥❣️

@heyjimbo81 2 года назад

Can you help me the find me a wall mount for 55 inch Panasonic plasma ST 60? I’m struggling.

@BTheInstaller 2 года назад

I made a video for that. Back last spring.

@selc2620 2 года назад

Will you be reviewing the Hisense u8G or TCL r646?

@BTheInstaller 2 года назад

Possibly. I am pretty comfortable recommending either after last year the H9G and 535 were both solid and both rtings and fellow youtubers really liked these two over those.

@yesimraging 2 года назад

M6 what though they come in different mm

@james42519 25 дней назад

Newer houses can use metal studs so that could be a problem for some people

@BTheInstaller 25 дней назад

Metal studs are fine for most installs, but they're pretty rare in single family homes. More common in apartments and condos.

@viceverse11 2 года назад

Bought the 86" LG NanoCell, what mount would you suggest?

@BTheInstaller 2 года назад

Bigger mount. I made a video on best tv mounts on Amazon and Costco

@viceverse11 2 года назад

@@BTheInstaller I saw that video a few days ago. The mount with the extension bracket?

@afsonamui6853 Год назад

What kind of tv is that

@dcbrot 2 года назад

B, I forgot to use the washers on the two top lag bolts for the wall mount. Am I screwed?

@BTheInstaller 2 года назад

Is the bolt head bigger than the hole in the mount? If so, it should be fine. Washers are best to have on to prevent that.

@dcbrot 2 года назад

@@BTheInstaller yes, the bolt head is bigger than the mount. But I pulled the bolts out and put the washers on and screwed them back in. It felt clean and secure so I’m feeling ok. Dude your video was awesome. I bought the mount and powerbridge just like you showed and followed your video step-by-step! It’s looking very clean!!!! You’re a great teacher

@BTheInstaller 2 года назад

Good stuff. Glad it helped.

@ac7384 10 месяцев назад

Where you get your adapter to your impact to use on the lagblots ? What’s called ?

@BTheInstaller 10 месяцев назад

Hexagonal to 3/8 drive

@ac7384 10 месяцев назад

@@BTheInstaller you still reccomend the dream mount Seem last recent video you didn’t mention it. Thjnknws the mount started with p. Thank k you

@ac7384 10 месяцев назад

And do you have a link for the hex drive ?

@dianevaskas842 2 года назад

Call me stupid, but I need help installing a Sony 50" X80 J to a Hung Onn wall mount. The holes in the tv itself are very deep and the recommended screws are 6mm screws between 11 and 12mm long. That screw fits no where near the right amount of depth to attach the mount and get to the tv. The spacer we tried did not work. When I tried to drop the 6mm screw in the deep cavity just to see how it fit, it was too large for the screw hole. Is Sony the only tv that recesses that hole so deeply that you can't get to it? Every video of yours I have watched is a quick attachment of the mount to the tv. Why me???? I can try a different mount hoping it comes with better hardware choices but somehow I think it's got to me. They can't be making universal type mounts that just do work for all models. The closest video I can find of yours still doesn't really focus on using spacers and washers. May be a good subject for a future video. I'm totally lost and would return the tv if I could, but it was a reward from work that I had very little choice on selections to choose from. So far, it's a gift of frustration. :( Thanks for any advice you may have.

@BTheInstaller 2 года назад

Some Sony tvs have bolts that go into the deep holes and then the screws go into those. Also your tv mount may add depth to their 11-12mm long recommendations.