We show you in detail how to install our ceramic façade with the FK system, installation of continuous system and discontinuous system.
The use of ventilated facade as an innovative construction system has gained a good suport among architects and contractors. This is due to its high quatilty standars, its esthetic possibilities and, specially, its thermic and acoustic isolation properties.
This system has open vertical and overlapping horizontal joints. Composed of brackets, vertical T profile, horizontal rails and metallic springs which have an anti-ratling function. When installing it, we will constantly check weights and levels. We fix the brackets to the slab with a mechanical anchor and we fix the bracket to the wall using a chemical/mechanical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with self-drilling steel screws. This union should allow the elongation of the vertical profile. In order to achieve this, we rivet a fixed point in the above bracket and we rivet the following brackets with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout the building’s entire vertical line. Then, the fixing of the pieces or cladding to the facade is carried out including the use of means of a steel spring, .Light alveolar piece of 16/20 mm thick, with double anchorage on the rear part that prevents the piece from coming loose in any situation. The open joints improve the ventilation of the facade. The main advantages of this model are that it is easy to install and is very light, only 28 kg/m2. This makes it a light, cost-efficient and reliable system.
24 мар 2022
