Тёмный

Installing 1982-2004 Chevrolet S10 2"/2.5" Lowering Kit by Rough Country 

Rough Country
Подписаться 124 тыс.
Просмотров 303 тыс.
50% 1

If you want to easily transform the look of your truck, look no further than Rough Country's 2" / 2.5" Lowering Kit for 82-04 Chevy S-10 pickups. Our easy-to-install Lowering Kit is a total transformation, offering a sleek, modern look that keeps heads turning!
A set of sturdy Driver and Passenger Lowering Spindles offer plenty of strength and durability while helping maintain a factory-like ride. Also included are a set of Fabricated rear blocks, offering superior strength and reliability over cast blocks. All together, this kit drops the ride height of your S-10, S-15, Blazer or Jimmy by 2" in the front and 2.5" in the rear, offering a sleek, level drop while keeping other crucial components in line. Running an Extended Cab? No problem! Our optional 3" rear block kit gives extended cab models the same lowered, level look. Best of all, This easy-to-install lowering kit features a simple, 100% bolt-on installation process.
Get yours at www.roughcountry.com/gm-loweri...
Like us on Facebook: / roughcountry
Follow us on Instagram: / roughcountry
Follow us on Twitter: / roughcountry
And check out our web site at roughcountry.com

Авто/Мото

Опубликовано:

 

13 авг 2013

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 133   
@opparigo3470
@opparigo3470 5 лет назад
Well explained ! 10 of 10.
@TxJonathan
@TxJonathan 10 лет назад
Very good video can't wait to lower my blazer.
@williameast1445
@williameast1445 11 лет назад
Wish there was a before and after but excellent how to video two thumbs up
@ericwells7777
@ericwells7777 11 лет назад
Nice job with the video I was thinking it was a lot harder to switch out the spindles on my 93 S10 and was thinking of having a shop do this but now Im confidant I could do this on my own...again, very good "how to" video...Thanks!
@luissonoma6255
@luissonoma6255 3 года назад
How is the truck doing?
@electricguysvcs
@electricguysvcs 3 года назад
Concern I had - when using drop spindles is it okay to install tie rod (outer) the same direction as it was taken out? Or should it be reversed facing down?
@KILOKEYZ101
@KILOKEYZ101 7 лет назад
Will this fit on a 05 jimmy ? If so do you sell lowering kits 2.5 in the front / 3 in the back for a 05 jimmy
@KhawChing
@KhawChing 3 года назад
Starts with stock rims nut shows aftermarket rims going back on. So the video did not address the question I have. With the drop spindles in the front, is a larger than stock rim diameter needed?
@camdenmichener6853
@camdenmichener6853 3 года назад
Does this work with a 4x4 too? Not necessarily keeping the 4 wheel drive if I can’t but will it still bolt up?
@ozzplasencia1416
@ozzplasencia1416 4 года назад
Will it make it hit hard on bumps? Or will ride smooth?
@30framesmedia87
@30framesmedia87 9 лет назад
does this work for the zr2 version s10
@SmithKQ4PAQ
@SmithKQ4PAQ 11 лет назад
Any future plans for a kit for a 1991 ranger?
@CristianLopez-ne3ns
@CristianLopez-ne3ns 7 лет назад
Nice video! Obviously you can see that the shocks were replaced I'm the rear but looking at the kit it doesn't look like it comes with any shocks for the front or rear? I'm guessing it will be necessary to buy new shocks for this kit to work right?
@rcaholicfab3671
@rcaholicfab3671 7 лет назад
Cristian Lopez I talked to a guy on their life chat and he said stock shocks work
@elpulpo4585
@elpulpo4585 11 лет назад
Whats the price for that kit. For an 89 s10. And will it clear 20 inch after market wheels?
@Builtaroundnature
@Builtaroundnature 2 года назад
A before and after photo would’ve been great using same wheels. Literally would’ve purchased them right now. Any where I could get a before and after using stock wheels?
@andrewramirez3332
@andrewramirez3332 Год назад
apparently they don’t fit with stock wheels
@johnnyturbo8460
@johnnyturbo8460 9 месяцев назад
Why no picture of the finished product??????
@alvaro-astorga
@alvaro-astorga 9 лет назад
hola donde puedo adquirir un kit para una s10 2001 o saber si exportan, saludos
@pl747
@pl747 6 лет назад
Are the rear lowering blocks the open type or the good solid steel ones? They look like the open type.
@RoughCountryTV
@RoughCountryTV 6 лет назад
This kit has the hollowed out blocks.
@byrontillman4184
@byrontillman4184 5 лет назад
Still looking for the information about the rear shocks with the lowering kit for s10
@RoughCountryTV
@RoughCountryTV 5 лет назад
This kit allows you to run the OEM stock shocks
@vegiguy16
@vegiguy16 2 года назад
A much better way to lower the rear of a leaf spring vehicle is to either use springs with less arch (given the same spring rate) or to have the existing springs de-arched by a spring shop. I've never liked that using lowering blocks moves the springs closer to the ground.
@nicjohnson2665
@nicjohnson2665 2 года назад
Will it work with 14 inch rims
@nature_guy
@nature_guy 8 лет назад
Can someone tell me how tight the upper and lower ball joint nuts should be? Also I bought a knuckle but I did not get new cotter pins.. What are the size of the cotter pins I need to get? Thanks!
@RoughCountryTV
@RoughCountryTV 8 лет назад
I do not have the dimensions for the cotter pin. However it is the stock size. If you could get with a dealership or manufacturer of the truck they could get you the size of the cotter pin.
@jacoblara7700
@jacoblara7700 9 лет назад
Can someone pleas tell me if you need new shocks for 3 inch blocks? Thank you
@hayden9102
@hayden9102 3 года назад
No but might as well replace them anyways
@johnathondaerr7423
@johnathondaerr7423 4 года назад
Do you need to realign the front end after messing with the tire rod end?
@danielgresham4763
@danielgresham4763 4 года назад
After adding the new drop spindle yes! I had too at least
@lifewithron4466
@lifewithron4466 2 месяца назад
do y’all have one for a 2001 blazer 2wd all i see is ones for a s10
@onewheelup
@onewheelup 5 лет назад
2005 chevy blazer is TOTALLY different,got a 2 inch front and rear from bell tech.
@chrisrivas8157
@chrisrivas8157 8 лет назад
I see you guys replaced the shocks for the rear aswell where can i get those at?
@RoughCountryTV
@RoughCountryTV 8 лет назад
+chris rivas You can get those by contacting us at 1-800-222-7023. We have those available.
@nicholasyoder
@nicholasyoder 6 лет назад
I have a 1997 Chevy SS s10. Do I already have drop spindles from the factory or can I buy some and install them?
@RoughCountryTV
@RoughCountryTV 6 лет назад
You will have spindles on your truck, yes. But you will not have drop spindles. Those are included in the lowering kit. You would have to remove your stock spindle and install the drop spindle.
@nicholasyoder
@nicholasyoder 6 лет назад
Rough Country well it came lowered from the factory I think because it's an SS and it does have lowering blocks in the rear
@hebermarvin78
@hebermarvin78 4 года назад
It would be nice to se the finished product????
@joeyrivas7473
@joeyrivas7473 8 лет назад
what size are does blots holding the upper joint and the lower joint
@RoughCountryTV
@RoughCountryTV 8 лет назад
I am assuming you are referring to the ball joints?
@DoonerA
@DoonerA 10 лет назад
At what point did you chain down the front coil springs?
@RoughCountryTV
@RoughCountryTV 9 лет назад
Not necessary. This easy-to-install lowering kit features a simple, 100% bolt-on installation process
@efraincarreon4376
@efraincarreon4376 7 лет назад
What size wrench do I need for those bolts?
@RoughCountryTV
@RoughCountryTV 7 лет назад
s3.amazonaws.com/roughcountry/install/92724000.pdf
@youtubeisbroken241
@youtubeisbroken241 4 года назад
I can’t believe the suspension stayed the same for that long of a run
@kramnull8962
@kramnull8962 4 года назад
It is the same basic design as all the way back to 60's novas and Chevelles. only different frame length and width.
@natezahradnik
@natezahradnik 8 лет назад
What was the reason for replacing the rear shocks? I just put all new shocks on my pick up and if i was to use this system, would I need to use different shocks? In other words, does it change the shock distance at all?
@RoughCountryTV
@RoughCountryTV 8 лет назад
+Nate Zahradnik Yes it will require shorter shocks.
@jimmyjohnny4854
@jimmyjohnny4854 6 лет назад
Ah but the shocks do not come with the kit. hmmmm
@jsi4u2nv
@jsi4u2nv 6 лет назад
Actually no it doesn't change the shock distance. It uses the same factory mounting points. The blocks lift the rear axle closer to the body but the leaf springs remain in the stock position! If you were to replace the springs with lowered ones then it would affect shock travel.
@mikebaconheart2620
@mikebaconheart2620 6 лет назад
What about front end alignment after install ???
@RoughCountryTV
@RoughCountryTV 6 лет назад
Front end alignment is required after installation.
@RoughCountryTV
@RoughCountryTV 9 лет назад
+saljbruno Those are Vision Milani Bel Air wheels.
@luissonoma6255
@luissonoma6255 3 года назад
What kind of control arms are recommended for this kit?
@bubbaslaughter8379
@bubbaslaughter8379 3 года назад
He used stock control arm it looks like
@antdaddy0
@antdaddy0 10 лет назад
I'm surprised the socket did not split or shatter on install. Guess that just regular people doing install no ASE certificates here. Use only impact type sockets with a impact gun man.
@JoseMejia-cg4bs
@JoseMejia-cg4bs 8 лет назад
You should of showed the truck sitting on the ground after the kit was install
@elpulpo4585
@elpulpo4585 11 лет назад
285 40 20 rear 255 45 20 fronts?
@davidcox2498
@davidcox2498 5 лет назад
Where can i get a set of spindels for my 75 Nova ???
@RoughCountryTV
@RoughCountryTV 5 лет назад
We do not offer any spindles for a 78 Nova. I would recommend checking with Fat Bob's Garage.
@HoosierDaddy_927
@HoosierDaddy_927 4 года назад
No shot of the finished project?!
@Daislandchik67
@Daislandchik67 11 лет назад
I like
@Defund_HOA.
@Defund_HOA. 10 лет назад
What kind of shocks did you use on the drop kit? I plan on lowering my s10 with this kit & I was told it's highly recomended to replace the shocks when doing so..
@theodoresierra5966
@theodoresierra5966 4 года назад
I have to drop to my driving line on my 1989 Chevy s10 to tow it
@brianneston2688
@brianneston2688 4 года назад
82 through 2003 was the two wheel drive they discontinued the two-wheel drive in 2003 2004 model 4-wheel drive crew cab standard
@ThugWaffIe
@ThugWaffIe 8 лет назад
do y'all have a 3"/4" drop kit?
@RoughCountryTV
@RoughCountryTV 8 лет назад
+Darian Rodriguez We do not, we only offer the 2/2.5 and 2/3 drop.
@Deeict42
@Deeict42 6 лет назад
where can I purchase this kit at? looks very simple
@RoughCountryTV
@RoughCountryTV 6 лет назад
www.roughcountry.com/
@nissand2188
@nissand2188 5 лет назад
Would it be the same for a first gen?
@RoughCountryTV
@RoughCountryTV 5 лет назад
This one is for the 82-04 model so it covers all of the S-10 series
@Cjdjdjxj
@Cjdjdjxj 3 года назад
Where is the Video for the Lift Kit ?
@jake12.48
@jake12.48 2 года назад
They still don't have a video for their 2" lift. Did you ever put it in? I'm looking for advice before I tackle it
@jontwitty402
@jontwitty402 7 лет назад
what the largest size tire you.can run on it after u lifted it
@timwilliams632
@timwilliams632 8 лет назад
Nice video. Please grease the NEW spindle!
@mardariusjohnson5468
@mardariusjohnson5468 4 года назад
Is this the same way to lift the truck ?
@jake12.48
@jake12.48 2 года назад
Did you ever put in the lift? That's I'm looking at doing.
@markonpoint3219
@markonpoint3219 4 месяца назад
Just wish they showed how it looked sitting afterwards
@akafungi-eater1233
@akafungi-eater1233 4 года назад
Im a Proud new owner of a 90's S10 durango. Sound like stupid question but would this kit work aswell on a durango model.
@RoughCountryTV
@RoughCountryTV 4 года назад
Sorry this would not be compatible with that vehicle. We do not offer anything for that make and model as S-10 is manufactured by Chevrolet and Durango is manufactured by Dodge.
@akafungi-eater1233
@akafungi-eater1233 4 года назад
@@RoughCountryTV my truck is a chevrolet S10 Durango. 1990.? I'm not dumb I'll make video n post with link to prove it's a s10 durango
@Stevo-xe9jw
@Stevo-xe9jw 4 года назад
@@akafungi-eater1233 Sorry if I'm late to the party sir. The "Durango" designation is strictly the trim level of your particular S10, mostly the interior trim. I had a 1990 S10 with the Durango trim. Yes, if it's a 4x4, then this will work.
@akafungi-eater1233
@akafungi-eater1233 4 года назад
@@Stevo-xe9jw I just have 2wd.
@saljbruno
@saljbruno 9 лет назад
what kind of rims are those?
@MichelLinschoten
@MichelLinschoten 8 лет назад
+saljbruno Standard rims
@anthonymr921
@anthonymr921 8 лет назад
+Michel Linschoten he meant the ones at the end
@LONEWOLFCP
@LONEWOLFCP 5 лет назад
Will this work on my 2002 chevy blazer
@RoughCountryTV
@RoughCountryTV 5 лет назад
No this kit does not fit that make and model. We do not offer a lowering kit for that make and model
@LONEWOLFCP
@LONEWOLFCP 5 лет назад
@@RoughCountryTV i cant seem so find lowering kits anywhere for my blazer but i can find lowering kits for a chevy s10 pickup same wheen base as my 02 blazer is it possible that they are interchangeable?
@LONEWOLFCP
@LONEWOLFCP 5 лет назад
Its a 4x4 as well and i just want to lower it 2.5 inches
@mccleery3
@mccleery3 5 лет назад
Damn, was just about to ask if this fit an 03 2wd Blazer 😢
@chaystevens6509
@chaystevens6509 6 лет назад
I have the kit and my tire rode is really close to my rim what did I do wrong?? Lol
@RoughCountryTV
@RoughCountryTV 6 лет назад
Is that before or after front end alignment?
@chaystevens6509
@chaystevens6509 6 лет назад
Rough Country both
@JD-og9fv
@JD-og9fv 5 лет назад
Chay Stevens just curious. Are you running aftermarket rims? With wider offset? Or all stock wheel and tire? Also what year do you have? Don’t mean to ask so much. Just wanna do my research and get some knowledge from someone who’s installed the kit. BTW Sorry for the lateness🤷🏼‍♂️
@RoughCountryTV
@RoughCountryTV 11 лет назад
The price is $229.95. It will clear 20 inch after market wheels, depending on the tire size that are on the wheels.
@Reeko904
@Reeko904 8 лет назад
how much does this kit cost
@RoughCountryTV
@RoughCountryTV 8 лет назад
+Reeko Suave www.roughcountry.com/gm-lowering-kit-724.html $229.95 Plus shipping
@Reeko904
@Reeko904 8 лет назад
+Rough Country thanks... but what if I only want to drop the back
@martinrivera3230
@martinrivera3230 8 лет назад
who makes 3"lowering shackles,I dont need kit just 3" shackles (1982 chevy c10 2whl dr.)
@RoughCountryTV
@RoughCountryTV 8 лет назад
You can check with Top Gun Customz
@martinrivera3230
@martinrivera3230 8 лет назад
Thanx guys
@brianneston2688
@brianneston2688 4 года назад
S10 has made in 82 has two regular cab stem cap in 1983 the regular cab was discontinued in 2003 and regular cab crew cab was made in 2001 boo 2004 Harley and four-wheel drive
@RT6.2
@RT6.2 10 лет назад
would it be the same kit for a 91 s10 4cylinder ?
@RoughCountryTV
@RoughCountryTV 9 лет назад
Yes
@whatarushlod
@whatarushlod 2 года назад
All that? And no before and after pictures???
@BEARLOCSTARR1
@BEARLOCSTARR1 7 лет назад
show me the b4 and after look
@RoughCountryTV
@RoughCountryTV 7 лет назад
This is just an installation tutorial. You can see a "before and after" 3d rendering and "after" video footage in the marketing video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CNCvXHuoKNg.html
@pl747
@pl747 6 лет назад
They don't have a complete side shot of before and after for some reason. And that is the one everyone wants to see.
@jamesrobin9961
@jamesrobin9961 5 лет назад
This dude definitely seems to know alot about handling nutts?
@pochocho95
@pochocho95 4 года назад
Should've showed how low the truck got
@jokshansanchez5656
@jokshansanchez5656 3 года назад
No Pics wow
@liu3kang
@liu3kang 8 лет назад
assassins creed 2 remix
@jrghostrider4
@jrghostrider4 4 года назад
THERES A GASKET
@lottsalasagna431
@lottsalasagna431 6 лет назад
Why not replace the ball joints while you're there ...daahh
@ReddDollaBill
@ReddDollaBill 3 месяца назад
😂 exactly
@6.0_tx_drewski8
@6.0_tx_drewski8 2 года назад
First 48 voice
@darenyoung8045
@darenyoung8045 7 лет назад
need safety glasses on at 4:38
@mikebower4582
@mikebower4582 4 года назад
Calm down OSHA
@scottbeutler4459
@scottbeutler4459 Год назад
Please if you are going to have them apart, repack your bearings with grease and get you about 8 cans of brake cleaner. You'll thank me lol
@yomommajumprcables
@yomommajumprcables 4 года назад
Damn no before/ after
@GrnArrow092
@GrnArrow092 8 лет назад
I wouldn't put those wheels on my truck. They're just not my style.
@gr8latino
@gr8latino 10 лет назад
Lame. How about a before and after shot of the truck??
@RoughCountryTV
@RoughCountryTV 9 лет назад
This is just an install video. You can see shots of the truck with this kit in the marketing video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CNCvXHuoKNg.html And a before and after photo on the product's page on our web site here: www.roughcountry.com/gm-lowering-kit-724.html
@pl747
@pl747 6 лет назад
They don't have a complete side shot of before and after for some reason.
@kingstray9074ever
@kingstray9074ever 4 года назад
Please please use a torque wrench grease your axles and for the love of god don’t use Chanel locks for your spindle nuts. Ball joints tie rods spindle nut and shackles all have torque specs
@luissonoma6255
@luissonoma6255 3 года назад
What grease do you recommend? I have a 93 Sonoma stock motor but possible LS swap in the future. It has 2” drop spindles at the moment and bearings are bad so I have to do them soon.
@jacobhallett6524
@jacobhallett6524 7 лет назад
Beating the shit out of the knuckle is going to do nothing but bad things. Proper way to get the ball joints is using a ball joint separator as well as a tie rod end separator.
@dustingeorge8532
@dustingeorge8532 4 года назад
No final product, what a joke
Далее
GM S10, S15 and Sonoma Coilover Suspension Installation
14:57
Как похудеть на 10 кг ?! БЫСТРО!
07:06
625 hp Sleeper '85 Chevy S10 Pick Up Truck
12:10
Просмотров 465 тыс.
CHEVY S10 - Everything You Need to Know | Up to Speed
13:21
Dropping Front End on a Chevy S10
14:31
Просмотров 14 тыс.
Installation of a S10 3/4”  Lowering Kit
33:04
Просмотров 77 тыс.