Installing a Domin8r Extreme Winch in an Xrox Bar 

I just fitted the same winch to my Jeep JK yesterday. I fitted it behind my opar bumper, between the chassis on a mounting plate made from some 180mm channel. Fits and works great. One thing to lookout for is CHECK ALL THE BOLTS! The winch seems to be really good quality, with a really nice textured coating, but every bolt needed tightening.

Thanks this was helpful. Pissed myself laughing at the 5mins thing - I have had so many project days like that.

I asked and you delivered. Thanks mate.

It does fit it does rotate, ive got same units on my delica, my control box is under my drivers blinker

Hey mate, I have the same setup but when installing mine I end up with the little round shaft streight where my fairlead will be.How did you get around that issue?

Nice install bro! I had the same issue with my arb Sahara bullbar. I can only reach to change to free spool by opening my bonnet.. pretty irritating

Kings has a video on how the clutch rotates so definitely check that out

I just put the control box inside the bar on the passenger side

keep us posted if its a reliable enough winch. want to get one but been umming and ahhing about the kings one.

Perfect video for me mate! I was under the impression it could rotate on the extreme! Do you rekon you Could fit 2 x 7” spotties and the winch control box all under that center loop , control box in the middle of the 2 lights ?

1800 views and only 68 likes! Come on people 🤷🏼‍♂️ if you watched the video hit that like👍🏻 button👆🏻 for this man who went well out of his way to make this video for us, it dont cost ya nothing and its a sign of respect. Enjoy your work mate, keepin it honest, simple and your enthusiasm shows through in all your videos

Should of taken the front grill off mate, 4 bolts would of saved you unbolting the winch 6x but solid video! Good stuff mate!

Mate are you still using the winch? Happy with the setup! Ive pulled the trigger on the exact setup

Where'd you find a 3 hoop xrox? I love these bars, but hate the single hoop design.

Bolting the winch to the winch cradle or directly to the face of the bullbar? Which is the more safe and strongest? I have a different bullbar but did it to the cradle.

Nice brother

A maze ing. Thank you

hi mate, i've got an Xrox bull bar, not too familiar with winches set up etc so sorry if it's a dumb q. Is the winch cradle a seperate piece which I need to order from outback armour? Or is the bar already ready to go to whack the winch in. cheers mate

How did you put the battery in the wireless remote? Do I have to unscrew it?

Mate how did u fit the fairlead ?

You reckon it’s usable long term with the knob at the back? Or will it shit you off and have to change it? Mint rig btw 👌🏽

Show us how you did your number plate mate

Hey mate the new dominator xtreme winch you can rotate the clutch house.

Hey bro, nice video! Since you have this bullbar, which is not the most aerodynamic on the market, have you seen you fuel economy affectes but it? Cheers

Hey mate, how much lift do you have, and how big are your tyres. Is it worth the money for the upgrade?

What's the weight of this winch. Together with the bull bar bumper

150mm bolt pattern offset fsirlead? have the same bar and winch and yet to install. does the winch sit a bit high for the standard fair lead

Pull the control box apart man. There’s a hole on the top of the xrox bar for the remote plug.

Hey mate, what fairlead did you use?

Hey mate do you have a problem with the negative touching the bar i did and it sent sparks every where

you can rotate the gear box on it

You cut the 8mm of bolt off that is ment to account for the 8mm reinforced plate most bull bars have

What’s the first song playing?

As comments have stated the clutch housing can be rotated to put the lever at the top. The link below shows how to do it. It doesn't mention that you up with one less screw in it but it works fine. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n3mAUG8RGl4.html

Mate, can we install a winch without a bullbar?

Clearly says rotatable clutch housing on the box

Just wondering if you have a winch cradle in there, I have an xrox bar and wondering if a 12,000lb winch would snap off the screws without cradle

I thought the xrox bar could only hold up to 9500lb